Products and Services:
[
[
THE BLADEDRIVE® GUILLOTINE DRIVE
SYSTEM,EXCLUSIVELY FROM PATHWAY,
IS THE MOST COST EFFECTIVE, LOWEST
MAINTENANCE GUILLOTINE DRIVE
SYSTEM ON THE MARKET.
Fabricated AWWA water valves
FEA for specialized designs
3D application modeling
On-site damper performance surveys
Life extension studies
Special applications for thermal oxidizers
Special applications for Fluid Cat Cracking
expan s ion j oint s
Cycle and leak testing
W
hether
our
customers
need
service,
inspection,
installation
onsite
repair,
Whether
our
customers
need
service
inspection,
installation
or or
onsite
repair,
Whether
our
customers
need
service
inspection,
installation
or onsite
Pathway
brings
exceptional
skills,
problem-solving
capabilities
and
technical
Pathway
brings
exceptional
skills,
problem-solving
capabilities
and
technical
repair, Pathway brings exceptional skills, problem-solving capabilities
experience
toto
the
challenge.
Work
is performed
to
optimal
operation
and
safety
experience
the
challenge.
Wethe
can
provide optimal
operation
and
safety
and technical
experience
to
challenge.
We
can
provide
optimal
opstandards
in
the
shortest
time
possible.
standards
in the
shortest
time possible.
eration and
safety
standards
in the shortest time possible.
on-site
service craftsmen
are are
famous
worldwide
for for
their
specialized
weldThe
On-Site-Service
craftsmen
famous
worldwide
their
specialized
ing
skills,
hard
work
ethic,
and
“can-do”
attitude.
They
help
customers
avoid
Pathway’s
on-site
service
craftsmen
are attitude.
famous
worldwide
for their
welding
skills,
hard
work
ethic,
and
“Can-Do”
The
On-Site
crews
downtime,
reduce
labor
losses,
and
e
nsure
correct
on-line
and
off-line
perform
turnkey
installation
ofhard
expansion
products
andThey
specialized
welding
skills,
work joints
ethic,and
anddamper
“can-do”
attitude.
ducting
assemblies.
ClamShell
repairs on
metaldowntime,
expansion joint
bellows.
help customers
avoid
reduce
labor losses, and ensure cor-
rect on-line and off-line ducting assemblies.
Services include:
Pipe stress analysis
M
aintenance engineers at power generating utilities and
petrochemical plants specify Pathway fabric expansion
joints for good reason. Pathway fabric expansion joints consistently
perform above expectations and meet the most rigorous specifications
and requirements.
These joints are made from a wide range of materials including FKM
fluoroelastomer and EPDM elastomer with glass reinforcement and
glass reinforced fluoroplastic, depending on the application.
Products and Services:
Five-year warranty protection
48-hour critical shipment capability
Lowest installed cost with Darlyn 1100CB®
Site surveys and inspection services
Easy-to-splice materials
Performance validated by testing
Darlyn 1100CB® is a registered trademark of Saint-Gobain.
n d e r Pressu
P re s s ure
re
u nder
We produce precision louvers and double louvers, with seal air for man-safe isolation, butterfly
dampers, single and double poppet valves for bag house flow control, diverter valves, and
guillotine dampers for flow isolation.
SERVICE
athway damper products are used in the most demanding flue gas environments at power
generating utilities and petrochemical facilities. We take pride in the fact that they are part of
environmental solutions that provide better air quality around the world through clean technology.
FABRIC
DAMPERS
PERFORMANCE UNDER PRESSURE
P
Clam Shell
repairs
Services
include:
[
[
ACCEPT NO SUBSTITUTION.
PATHWAY IS THE LEADING
AUTHORITY IN PIPING
SOLUTIONS.
On-line and off-line ducting expansion joint surveys
Pipe stress analysis
Damper installation and repair
ClamShell repairs
Fabric expansion joint installation and repair
On-line and off-line ducting expansion joint surveys
Turnkey metallic expansion joint installation
Damper installation and repair
On-site expansion joint refurbishment and upgrade
Fabric expansion joint installation and repair
Turnkey metal expansion joint installation
On-Site expansion joint refurbishment and upgrade
FOR THE RIGHT FIX QUICK,
ANYWHERE IN THE WORLD
24/7/365, CALL US NOW AT
1-800-847-5746.
Senior Flexonics Pathway
2400 Longhorn Industrial Drive
New Braunfels, Texas 78130
P: 830.629.8080 F: 830.629.6899
pathway.com
Markets include:
LNG
Coal fired plants
Nuclear power
Cement
Ship building
HVAC
TOP ROW
BOTTOM ROW
Petrochemical
Natural gas
METAL
A key element to our success is our focus on developing partnerships with
customers. We are dedicated to creating the highest quality products and
developing unique design solutions that meet the complex challenges inherent
in industrial processes.
O
PATHWAY ’ S SOLUTIONS ARE USED
I N M O R E T H A N 8 8 C O U N T R I E S.
TOP ROW
BOTTOM ROW
e xpa nsio n jo ints
athway is the world leader in the design, innovation, and manufacture of
high-quality metal and fabric expansion joints and damper products. With
over 100 years of experience, we offer clients unparalleled design, analysis, and
on-site installation capabilities.
EXPERTISE
PATHWAY
P
Phillips BP Amoco Shell Chevron Valero ExxonMobil Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineering JGC Toyo Engineering SK Engineering Daelim Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company
TVA Babcock Energy Sargent and Lundy Florida Power Wheelabrator Zachary Meade Westvaco Honeywell Flint Hills Resources Maraur team of engineers and skilled personnel is the most renown worldwide with over 500 years of combined technical expertise
thon Ashland Black and Veatch
Hoosier Energy UOP Sun Refining Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Elecand product development. Pathway is a company you can trust to deliver the best engineered solution for your piping and
tric Motiva Worley Parsons
Generation
Dowrange
Chemical
Luminant
Power Advatech
Corporation
Progress
Duke PowductingTXU
systems.
We offer the widest
of dimensions
and performance
capabilities forCabot
expansion
joints and damper
products Energy
in
the world
today. PCS Nitrogen Tampa Electric Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd. Bechtel
er Alabama Power Alstom
Power
[FABRIC]
Clay Skarovsky: Applications Engineer, BSME, 3 years
Alcoa Allegheny Power American Electric Power Stone and Webster
General Electric KBR Xcel energy Exelon CBI Conoco Phillips BP
Jason Hall: Fabric Engineer, 1 year
Chuck Greer: Manager of Fabric Expanion Joints and Field Services, 28 years
Amoco Shell Chevron Valero ExxonMobil Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineer[METAL]
ing JGC Toyo Engineering SK Engineering Daelim
Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company TVA Babcock
Cliff Harmon: Metal Engineer, AS Computer Technology, 27 years
Energy Sargent and Lundy Florida Power Wheelabrator
Zachary
Meade
Westvaco Honeywell Flint Hills Resources Marathon Ashland
Alejandro Gonzalez: Project
Engineer, BSME,
9 years
Dee Anderson: Production Engineering Manager, BSME, 16 years
Eric Davis: Proposal Engineering and CSM, BSME, 15 years
Black and Veatch Hoosier Energy UOP Sun Refining
Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Electric Motiva WorDru Moore: Project Engineer, BSME, 11 years
Eric Bastien: Project Engineer, BSME, 5 years
ley Parsons TXU Generation Dow Chemical Luminant
Power
Cabot Corporation Progress Energy Duke Power Alabama
Bill Farrell: Project Engineer,
BSME, 8 Advatech
years
John Castilleja: Production Engineer, BS-Industrial Engineering, 4 years
Power Alstom Power PCS Nitrogen Tampa Electric
Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd. Bechtel Alcoa AlWilliam Perry: Project Engineer, BSME, 1 year
Tony Baker: Engineering Manager, BSCE, MBA, 23 years
legheny Power American Electric Power StoneWeston
and
Electric KBR Xcel energy Exelon CBI Conoco Phillips BP Amoco
Allen: Webster
Production Engineer,General
BSME, 1 year
Shell Chevron Valero ExxonMobil Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineering JGC
Toyo Engineering SK Engineering Daelim Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company TVA Babcock Energy
Sargent and Lundy Florida Power Wheelabrator Zachary Meade Westvaco Honeywell Flint Hills Resources Marathon Ashland Black
and Veatch Hoosier Energy UOP Sun Refining Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Electric Motiva Worley
Parsons TXU Generation Dow Chemical Luminant Power Advatech Cabot Corporation Progress Energy Duke Power Alabama Power
Alstom Power PCS Nitrogen Tampa Electric Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd. Bechtel Alcoa Allegheny
[DAMPERS]
Power American
Electric Power Stone and Webster General Electric KBR Xcel energy Exelon CBI Conoco Phillips BP Amoco Shell
Ron Maxwell, PE: Business Unit Manager, BSME, MSME, 37 years
ChevronJohn
Valero
ExxonMobil
Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineering JGC Toyo
Sandoval: Damper
Engineer, BSME, 3 years
Danny Wheeler: Engineer, BSME, 13 years
Engineering
SK Engineering Daelim Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company TVA Babcock Energy Sargent
Juan Laredo: Damper Engineer, BSME, 2 years
and Lundy Florida Power Wheelabrator Zachary Meade Westvaco Honeywell Flint Hills Resources Marathon Ashland Black and Veatch
Hoosier Energy UOP Sun Refining Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Electric Motiva Worley Parsons TXU
Generation Dow Chemical Luminant Power Advatech Cabot Corporation Progress Energy
Duke Power
Alabama Power Alstom Power
[SPECIAL
PROJECTS]
David Peterson PE: Director of Sales and Marketing, BSME, MBA, 35 years
PCS Nitrogen Tampa Electric Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd.
Bechtel
Alcoa
Allegheny Power American
Bob Broyles
PE: Chief Engineer,
MSME, 33 years
Dan Edgar PE: Principal Engineer, BSCE, 30 years
Electric Power Stone and Webster General Electric KBR Xcel energy Exelon CBI Conoco Phillips BP Amoco Shell Chevron Valero
P
athway specializes in custom-engineered expansion joints used in critical
applications throughout the world. We are recognized as the lead innovator
for high temperature industrial expansion joint applications such as Fluid
Catalytic Cracking, Catofin® process, and styrene monomer production.
Pathway’s people are the decisive performance difference. Our design staff
applies job site experience, knowledge of pipe stress analysis, superior design
tools, and insight from resident experts to develop the most reliable product
designs available.
We also provide a full line of expansion joint products for steam and hot and
chilled water piping, compressed air, turbine exhaust, and all other industrial
piping and ducting applications.
Services include:
Sizes ranging from 2” through 240”
Cryogenic testing capability
Cycle life testing
Spring rate testing
Refractory lining
Heavy lift and handling capability
Expanding mandrel and hydraulic bellows forming
Wide range of material choice
Expedited delivery
Warranties you can depend on
Catofin® is a registered trademark of CBI Lummus.
Markets include:
LNG
Coal fired plants
Nuclear power
Cement
Ship building
HVAC
TOP ROW
BOTTOM ROW
Petrochemical
Natural gas
METAL
A key element to our success is our focus on developing partnerships with
customers. We are dedicated to creating the highest quality products and
developing unique design solutions that meet the complex challenges inherent
in industrial processes.
O
PATHWAY ’ S SOLUTIONS ARE USED
I N M O R E T H A N 8 8 C O U N T R I E S.
TOP ROW
BOTTOM ROW
e xpa nsio n jo ints
athway is the world leader in the design, innovation, and manufacture of
high-quality metal and fabric expansion joints and damper products. With
over 100 years of experience, we offer clients unparalleled design, analysis, and
on-site installation capabilities.
EXPERTISE
PATHWAY
P
Phillips BP Amoco Shell Chevron Valero ExxonMobil Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineering JGC Toyo Engineering SK Engineering Daelim Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company
TVA Babcock Energy Sargent and Lundy Florida Power Wheelabrator Zachary Meade Westvaco Honeywell Flint Hills Resources Maraur team of engineers and skilled personnel is the most renown worldwide with over 500 years of combined technical expertise
thon Ashland Black and Veatch
Hoosier Energy UOP Sun Refining Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Elecand product development. Pathway is a company you can trust to deliver the best engineered solution for your piping and
tric Motiva Worley Parsons
Generation
Dowrange
Chemical
Luminant
Power Advatech
Corporation
Progress
Duke PowductingTXU
systems.
We offer the widest
of dimensions
and performance
capabilities forCabot
expansion
joints and damper
products Energy
in
the world
today. PCS Nitrogen Tampa Electric Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd. Bechtel
er Alabama Power Alstom
Power
[FABRIC]
Clay Skarovsky: Applications Engineer, BSME, 3 years
Alcoa Allegheny Power American Electric Power Stone and Webster
General Electric KBR Xcel energy Exelon CBI Conoco Phillips BP
Jason Hall: Fabric Engineer, 1 year
Chuck Greer: Manager of Fabric Expanion Joints and Field Services, 28 years
Amoco Shell Chevron Valero ExxonMobil Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineer[METAL]
ing JGC Toyo Engineering SK Engineering Daelim
Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company TVA Babcock
Cliff Harmon: Metal Engineer, AS Computer Technology, 27 years
Energy Sargent and Lundy Florida Power Wheelabrator
Zachary
Meade
Westvaco Honeywell Flint Hills Resources Marathon Ashland
Alejandro Gonzalez: Project
Engineer, BSME,
9 years
Dee Anderson: Production Engineering Manager, BSME, 16 years
Eric Davis: Proposal Engineering and CSM, BSME, 15 years
Black and Veatch Hoosier Energy UOP Sun Refining
Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Electric Motiva WorDru Moore: Project Engineer, BSME, 11 years
Eric Bastien: Project Engineer, BSME, 5 years
ley Parsons TXU Generation Dow Chemical Luminant
Power
Cabot Corporation Progress Energy Duke Power Alabama
Bill Farrell: Project Engineer,
BSME, 8 Advatech
years
John Castilleja: Production Engineer, BS-Industrial Engineering, 4 years
Power Alstom Power PCS Nitrogen Tampa Electric
Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd. Bechtel Alcoa AlWilliam Perry: Project Engineer, BSME, 1 year
Tony Baker: Engineering Manager, BSCE, MBA, 23 years
legheny Power American Electric Power StoneWeston
and
Electric KBR Xcel energy Exelon CBI Conoco Phillips BP Amoco
Allen: Webster
Production Engineer,General
BSME, 1 year
Shell Chevron Valero ExxonMobil Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineering JGC
Toyo Engineering SK Engineering Daelim Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company TVA Babcock Energy
Sargent and Lundy Florida Power Wheelabrator Zachary Meade Westvaco Honeywell Flint Hills Resources Marathon Ashland Black
and Veatch Hoosier Energy UOP Sun Refining Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Electric Motiva Worley
Parsons TXU Generation Dow Chemical Luminant Power Advatech Cabot Corporation Progress Energy Duke Power Alabama Power
Alstom Power PCS Nitrogen Tampa Electric Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd. Bechtel Alcoa Allegheny
[DAMPERS]
Power American
Electric Power Stone and Webster General Electric KBR Xcel energy Exelon CBI Conoco Phillips BP Amoco Shell
Ron Maxwell, PE: Business Unit Manager, BSME, MSME, 37 years
ChevronJohn
Valero
ExxonMobil
Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineering JGC Toyo
Sandoval: Damper
Engineer, BSME, 3 years
Danny Wheeler: Engineer, BSME, 13 years
Engineering
SK Engineering Daelim Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company TVA Babcock Energy Sargent
Juan Laredo: Damper Engineer, BSME, 2 years
and Lundy Florida Power Wheelabrator Zachary Meade Westvaco Honeywell Flint Hills Resources Marathon Ashland Black and Veatch
Hoosier Energy UOP Sun Refining Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Electric Motiva Worley Parsons TXU
Generation Dow Chemical Luminant Power Advatech Cabot Corporation Progress Energy
Duke Power
Alabama Power Alstom Power
[SPECIAL
PROJECTS]
David Peterson PE: Director of Sales and Marketing, BSME, MBA, 35 years
PCS Nitrogen Tampa Electric Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd.
Bechtel
Alcoa
Allegheny Power American
Bob Broyles
PE: Chief Engineer,
MSME, 33 years
Dan Edgar PE: Principal Engineer, BSCE, 30 years
Electric Power Stone and Webster General Electric KBR Xcel energy Exelon CBI Conoco Phillips BP Amoco Shell Chevron Valero
P
athway specializes in custom-engineered expansion joints used in critical
applications throughout the world. We are recognized as the lead innovator
for high temperature industrial expansion joint applications such as Fluid
Catalytic Cracking, Catofin® process, and styrene monomer production.
Pathway’s people are the decisive performance difference. Our design staff
applies job site experience, knowledge of pipe stress analysis, superior design
tools, and insight from resident experts to develop the most reliable product
designs available.
We also provide a full line of expansion joint products for steam and hot and
chilled water piping, compressed air, turbine exhaust, and all other industrial
piping and ducting applications.
Services include:
Sizes ranging from 2” through 240”
Cryogenic testing capability
Cycle life testing
Spring rate testing
Refractory lining
Heavy lift and handling capability
Expanding mandrel and hydraulic bellows forming
Wide range of material choice
Expedited delivery
Warranties you can depend on
Catofin® is a registered trademark of CBI Lummus.
Markets include:
LNG
Coal fired plants
Nuclear power
Cement
Ship building
HVAC
TOP ROW
BOTTOM ROW
Petrochemical
Natural gas
METAL
A key element to our success is our focus on developing partnerships with
customers. We are dedicated to creating the highest quality products and
developing unique design solutions that meet the complex challenges inherent
in industrial processes.
O
PATHWAY ’ S SOLUTIONS ARE USED
I N M O R E T H A N 8 8 C O U N T R I E S.
TOP ROW
BOTTOM ROW
e xpa nsio n jo ints
athway is the world leader in the design, innovation, and manufacture of
high-quality metal and fabric expansion joints and damper products. With
over 100 years of experience, we offer clients unparalleled design, analysis, and
on-site installation capabilities.
EXPERTISE
PATHWAY
P
Phillips BP Amoco Shell Chevron Valero ExxonMobil Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineering JGC Toyo Engineering SK Engineering Daelim Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company
TVA Babcock Energy Sargent and Lundy Florida Power Wheelabrator Zachary Meade Westvaco Honeywell Flint Hills Resources Maraur team of engineers and skilled personnel is the most renown worldwide with over 500 years of combined technical expertise
thon Ashland Black and Veatch
Hoosier Energy UOP Sun Refining Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Elecand product development. Pathway is a company you can trust to deliver the best engineered solution for your piping and
tric Motiva Worley Parsons
Generation
Dowrange
Chemical
Luminant
Power Advatech
Corporation
Progress
Duke PowductingTXU
systems.
We offer the widest
of dimensions
and performance
capabilities forCabot
expansion
joints and damper
products Energy
in
the world
today. PCS Nitrogen Tampa Electric Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd. Bechtel
er Alabama Power Alstom
Power
[FABRIC]
Clay Skarovsky: Applications Engineer, BSME, 3 years
Alcoa Allegheny Power American Electric Power Stone and Webster
General Electric KBR Xcel energy Exelon CBI Conoco Phillips BP
Jason Hall: Fabric Engineer, 1 year
Chuck Greer: Manager of Fabric Expanion Joints and Field Services, 28 years
Amoco Shell Chevron Valero ExxonMobil Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineer[METAL]
ing JGC Toyo Engineering SK Engineering Daelim
Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company TVA Babcock
Cliff Harmon: Metal Engineer, AS Computer Technology, 27 years
Energy Sargent and Lundy Florida Power Wheelabrator
Zachary
Meade
Westvaco Honeywell Flint Hills Resources Marathon Ashland
Alejandro Gonzalez: Project
Engineer, BSME,
9 years
Dee Anderson: Production Engineering Manager, BSME, 16 years
Eric Davis: Proposal Engineering and CSM, BSME, 15 years
Black and Veatch Hoosier Energy UOP Sun Refining
Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Electric Motiva WorDru Moore: Project Engineer, BSME, 11 years
Eric Bastien: Project Engineer, BSME, 5 years
ley Parsons TXU Generation Dow Chemical Luminant
Power
Cabot Corporation Progress Energy Duke Power Alabama
Bill Farrell: Project Engineer,
BSME, 8 Advatech
years
John Castilleja: Production Engineer, BS-Industrial Engineering, 4 years
Power Alstom Power PCS Nitrogen Tampa Electric
Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd. Bechtel Alcoa AlWilliam Perry: Project Engineer, BSME, 1 year
Tony Baker: Engineering Manager, BSCE, MBA, 23 years
legheny Power American Electric Power StoneWeston
and
Electric KBR Xcel energy Exelon CBI Conoco Phillips BP Amoco
Allen: Webster
Production Engineer,General
BSME, 1 year
Shell Chevron Valero ExxonMobil Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineering JGC
Toyo Engineering SK Engineering Daelim Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company TVA Babcock Energy
Sargent and Lundy Florida Power Wheelabrator Zachary Meade Westvaco Honeywell Flint Hills Resources Marathon Ashland Black
and Veatch Hoosier Energy UOP Sun Refining Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Electric Motiva Worley
Parsons TXU Generation Dow Chemical Luminant Power Advatech Cabot Corporation Progress Energy Duke Power Alabama Power
Alstom Power PCS Nitrogen Tampa Electric Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd. Bechtel Alcoa Allegheny
[DAMPERS]
Power American
Electric Power Stone and Webster General Electric KBR Xcel energy Exelon CBI Conoco Phillips BP Amoco Shell
Ron Maxwell, PE: Business Unit Manager, BSME, MSME, 37 years
ChevronJohn
Valero
ExxonMobil
Jacobs Engineering Fluor Daniel S and B Engineering Fuji Electric Toshiba Chiyoda Engineering JGC Toyo
Sandoval: Damper
Engineer, BSME, 3 years
Danny Wheeler: Engineer, BSME, 13 years
Engineering
SK Engineering Daelim Hyundai Belleli KNPC TSMC CTCI Westinghouse Southern Company TVA Babcock Energy Sargent
Juan Laredo: Damper Engineer, BSME, 2 years
and Lundy Florida Power Wheelabrator Zachary Meade Westvaco Honeywell Flint Hills Resources Marathon Ashland Black and Veatch
Hoosier Energy UOP Sun Refining Reliant Energy 3M E I Dupont Babcox and Wilcox Associated Electric Motiva Worley Parsons TXU
Generation Dow Chemical Luminant Power Advatech Cabot Corporation Progress Energy
Duke Power
Alabama Power Alstom Power
[SPECIAL
PROJECTS]
David Peterson PE: Director of Sales and Marketing, BSME, MBA, 35 years
PCS Nitrogen Tampa Electric Korea Hydro and Nuclear Power Reliance Industries Statoil Ltd.
Bechtel
Alcoa
Allegheny Power American
Bob Broyles
PE: Chief Engineer,
MSME, 33 years
Dan Edgar PE: Principal Engineer, BSCE, 30 years
Electric Power Stone and Webster General Electric KBR Xcel energy Exelon CBI Conoco Phillips BP Amoco Shell Chevron Valero
P
athway specializes in custom-engineered expansion joints used in critical
applications throughout the world. We are recognized as the lead innovator
for high temperature industrial expansion joint applications such as Fluid
Catalytic Cracking, Catofin® process, and styrene monomer production.
Pathway’s people are the decisive performance difference. Our design staff
applies job site experience, knowledge of pipe stress analysis, superior design
tools, and insight from resident experts to develop the most reliable product
designs available.
We also provide a full line of expansion joint products for steam and hot and
chilled water piping, compressed air, turbine exhaust, and all other industrial
piping and ducting applications.
Services include:
Sizes ranging from 2” through 240”
Cryogenic testing capability
Cycle life testing
Spring rate testing
Refractory lining
Heavy lift and handling capability
Expanding mandrel and hydraulic bellows forming
Wide range of material choice
Expedited delivery
Warranties you can depend on
Catofin® is a registered trademark of CBI Lummus.
Products and Services:
[
[
THE BLADEDRIVE® GUILLOTINE DRIVE
SYSTEM,EXCLUSIVELY FROM PATHWAY,
IS THE MOST COST EFFECTIVE, LOWEST
MAINTENANCE GUILLOTINE DRIVE
SYSTEM ON THE MARKET.
Fabricated AWWA water valves
FEA for specialized designs
3D application modeling
On-site damper performance surveys
Life extension studies
Special applications for thermal oxidizers
Special applications for Fluid Cat Cracking
expan s ion j oint s
Cycle and leak testing
W
hether
our
customers
need
service,
inspection,
installation
onsite
repair,
Whether
our
customers
need
service
inspection,
installation
or or
onsite
repair,
Whether
our
customers
need
service
inspection,
installation
or onsite
Pathway
brings
exceptional
skills,
problem-solving
capabilities
and
technical
Pathway
brings
exceptional
skills,
problem-solving
capabilities
and
technical
repair, Pathway brings exceptional skills, problem-solving capabilities
experience
toto
the
challenge.
Work
is performed
to
optimal
operation
and
safety
experience
the
challenge.
Wethe
can
provide optimal
operation
and
safety
and technical
experience
to
challenge.
We
can
provide
optimal
opstandards
in
the
shortest
time
possible.
standards
in the
shortest
time possible.
eration and
safety
standards
in the shortest time possible.
on-site
service craftsmen
are are
famous
worldwide
for for
their
specialized
weldThe
On-Site-Service
craftsmen
famous
worldwide
their
specialized
ing
skills,
hard
work
ethic,
and
“can-do”
attitude.
They
help
customers
avoid
Pathway’s
on-site
service
craftsmen
are attitude.
famous
worldwide
for their
welding
skills,
hard
work
ethic,
and
“Can-Do”
The
On-Site
crews
downtime,
reduce
labor
losses,
and
e
nsure
correct
on-line
and
off-line
perform
turnkey
installation
ofhard
expansion
products
andThey
specialized
welding
skills,
work joints
ethic,and
anddamper
“can-do”
attitude.
ducting
assemblies.
ClamShell
repairs on
metaldowntime,
expansion joint
bellows.
help customers
avoid
reduce
labor losses, and ensure cor-
rect on-line and off-line ducting assemblies.
Services include:
Pipe stress analysis
M
aintenance engineers at power generating utilities and
petrochemical plants specify Pathway fabric expansion
joints for good reason. Pathway fabric expansion joints consistently
perform above expectations and meet the most rigorous specifications
and requirements.
These joints are made from a wide range of materials including FKM
fluoroelastomer and EPDM elastomer with glass reinforcement and
glass reinforced fluoroplastic, depending on the application.
Products and Services:
Five-year warranty protection
48-hour critical shipment capability
Lowest installed cost with Darlyn 1100CB®
Site surveys and inspection services
Easy-to-splice materials
Performance validated by testing
Darlyn 1100CB® is a registered trademark of Saint-Gobain.
n d e r Pressu
P re s s ure
re
u nder
We produce precision louvers and double louvers, with seal air for man-safe isolation, butterfly
dampers, single and double poppet valves for bag house flow control, diverter valves, and
guillotine dampers for flow isolation.
SERVICE
athway damper products are used in the most demanding flue gas environments at power
generating utilities and petrochemical facilities. We take pride in the fact that they are part of
environmental solutions that provide better air quality around the world through clean technology.
FABRIC
DAMPERS
PERFORMANCE UNDER PRESSURE
P
Clam Shell
repairs
Services
include:
[
[
ACCEPT NO SUBSTITUTION.
PATHWAY IS THE LEADING
AUTHORITY IN PIPING
SOLUTIONS.
On-line and off-line ducting expansion joint surveys
Pipe stress analysis
Damper installation and repair
ClamShell repairs
Fabric expansion joint installation and repair
On-line and off-line ducting expansion joint surveys
Turnkey metallic expansion joint installation
Damper installation and repair
On-site expansion joint refurbishment and upgrade
Fabric expansion joint installation and repair
Turnkey metal expansion joint installation
On-Site expansion joint refurbishment and upgrade
FOR THE RIGHT FIX QUICK,
ANYWHERE IN THE WORLD
24/7/365, CALL US NOW AT
1-800-847-5746.
Senior Flexonics Pathway
2400 Longhorn Industrial Drive
New Braunfels, Texas 78130
P: 830.629.8080 F: 830.629.6899
pathway.com
Products and Services:
[
[
THE BLADEDRIVE® GUILLOTINE DRIVE
SYSTEM,EXCLUSIVELY FROM PATHWAY,
IS THE MOST COST EFFECTIVE, LOWEST
MAINTENANCE GUILLOTINE DRIVE
SYSTEM ON THE MARKET.
Fabricated AWWA water valves
FEA for specialized designs
3D application modeling
On-site damper performance surveys
Life extension studies
Special applications for thermal oxidizers
Special applications for Fluid Cat Cracking
expan s ion j oint s
Cycle and leak testing
W
hether
our
customers
need
service,
inspection,
installation
onsite
repair,
Whether
our
customers
need
service
inspection,
installation
or or
onsite
repair,
Whether
our
customers
need
service
inspection,
installation
or onsite
Pathway
brings
exceptional
skills,
problem-solving
capabilities
and
technical
Pathway
brings
exceptional
skills,
problem-solving
capabilities
and
technical
repair, Pathway brings exceptional skills, problem-solving capabilities
experience
toto
the
challenge.
Work
is performed
to
optimal
operation
and
safety
experience
the
challenge.
Wethe
can
provide optimal
operation
and
safety
and technical
experience
to
challenge.
We
can
provide
optimal
opstandards
in
the
shortest
time
possible.
standards
in the
shortest
time possible.
eration and
safety
standards
in the shortest time possible.
on-site
service craftsmen
are are
famous
worldwide
for for
their
specialized
weldThe
On-Site-Service
craftsmen
famous
worldwide
their
specialized
ing
skills,
hard
work
ethic,
and
“can-do”
attitude.
They
help
customers
avoid
Pathway’s
on-site
service
craftsmen
are attitude.
famous
worldwide
for their
welding
skills,
hard
work
ethic,
and
“Can-Do”
The
On-Site
crews
downtime,
reduce
labor
losses,
and
e
nsure
correct
on-line
and
off-line
perform
turnkey
installation
ofhard
expansion
products
andThey
specialized
welding
skills,
work joints
ethic,and
anddamper
“can-do”
attitude.
ducting
assemblies.
ClamShell
repairs on
metaldowntime,
expansion joint
bellows.
help customers
avoid
reduce
labor losses, and ensure cor-
rect on-line and off-line ducting assemblies.
Services include:
Pipe stress analysis
M
aintenance engineers at power generating utilities and
petrochemical plants specify Pathway fabric expansion
joints for good reason. Pathway fabric expansion joints consistently
perform above expectations and meet the most rigorous specifications
and requirements.
These joints are made from a wide range of materials including FKM
fluoroelastomer and EPDM elastomer with glass reinforcement and
glass reinforced fluoroplastic, depending on the application.
Products and Services:
Five-year warranty protection
48-hour critical shipment capability
Lowest installed cost with Darlyn 1100CB®
Site surveys and inspection services
Easy-to-splice materials
Performance validated by testing
Darlyn 1100CB® is a registered trademark of Saint-Gobain.
n d e r Pressu
P re s s ure
re
u nder
We produce precision louvers and double louvers, with seal air for man-safe isolation, butterfly
dampers, single and double poppet valves for bag house flow control, diverter valves, and
guillotine dampers for flow isolation.
SERVICE
athway damper products are used in the most demanding flue gas environments at power
generating utilities and petrochemical facilities. We take pride in the fact that they are part of
environmental solutions that provide better air quality around the world through clean technology.
FABRIC
DAMPERS
PERFORMANCE UNDER PRESSURE
P
Clam Shell
repairs
Services
include:
[
[
ACCEPT NO SUBSTITUTION.
PATHWAY IS THE LEADING
AUTHORITY IN PIPING
SOLUTIONS.
On-line and off-line ducting expansion joint surveys
Pipe stress analysis
Damper installation and repair
ClamShell repairs
Fabric expansion joint installation and repair
On-line and off-line ducting expansion joint surveys
Turnkey metallic expansion joint installation
Damper installation and repair
On-site expansion joint refurbishment and upgrade
Fabric expansion joint installation and repair
Turnkey metal expansion joint installation
On-Site expansion joint refurbishment and upgrade
FOR THE RIGHT FIX QUICK,
ANYWHERE IN THE WORLD
24/7/365, CALL US NOW AT
1-800-847-5746.
Senior Flexonics Pathway
2400 Longhorn Industrial Drive
New Braunfels, Texas 78130
P: 830.629.8080 F: 830.629.6899
pathway.com