References
Alexander, J. M. [1961], Q. J. Appl. Math. 19, 31.
Alverson, R. C. [1956], J. Appl. Mech. 23, 411.
Atluri, S. N. [1984], Computer Methods Appl. Mech. Engrg. 43, 137.
Baba, S., and T. Kajita [1982], Int. J. Num. Methods Engrg. 18, 927.
Backhaus, G. [1968], Z. angew. math. Mech. 48, 99.
Baltov, A., and A. Sawczuk [1965], Acta Mech. 1, 81.
Bammann, D., and R. D. Krieg [1987], in Unified Constitutive Equations for
Creep and Plasticity (ed. A. K. Miller), Elsevier Applied Science, London,
p. 303.
Basinski, S. J., and Z. S. Basinski [1979], in Dislocations in Solids (ed. F. R.
N. Nabarro), Vol. 4, North-Holland, Amsterdam, p. 261.
Bataille, J., and J. Kestin [1975], J. Méc. 14, 365.
Bazant, Z. P. [1978], Int. J. Solids Struct. 14, 691.
Bell, J. F. [1968], The Physics of Large Deformation of Crystalline Solids,
Springer Tracts in Natural Philosophy, Vol. 14, Springer-Verlag, Berlin.
Bell, J. F. [1973], The Experimental Foundations of Solid Mechanics, in
Handbuch der Physik (ed. S. Flügge), Vol. VIa/1, Springer-Verlag, Berlin.
Bergander, H. [1980], Z. angew. Math. Mech. 60, 509.
Bianchi, G. [1964], in Stress Waves in Anelastic Solids(IUTAM Symp., Providence, 1963, ed. H. Kolsky and W. Prager), Springer-Verlag, Berlin, p. 101.
Bishop, J. F. W. [1953], J. Mech. Phys. Solids 2, 44.
Bishop, J. F. W., and R. Hill [1951], Philos. Mag. 42, 414.
Bishop, J. F. W., R. Hill, and N. F. Mott [1945], Proc. Phys. Soc. 57, 147.
Bland, D. R. [1956], J. Mech. Phys. Solids 4, 209.
Bleich, H. H., and I. Nelson [1966], J. Appl. Mech. 33, 149.
Bleich, H. H., and M. G. Salvadori, [1953], Proc. ASCE 79, Sep. 287.
Bleich, H. H., and M. G. Salvadori [1955], Trans. ASCE 120, 499.
Bodner, S. R. [1968], in Mechanical Behavior of Materials Under Dynamic
501
502
References
Loads (Symp. San Antonio, 1967, ed. U. S. Lindholm), Springer-Verlag,
New York, p. 176.
Bodner, S. R., and R. J. Clifton [1966], J. Appl. Mech. 34, 91.
Bodner, S. R., and Y. Partom [1972], J. Appl. Mech. 39, 751.
Bodner, S. R., and Y. Partom [1975], J. Appl. Mech. 42, 385.
Bolton, M. [1979], A Guide to Soil Mechanics, Macmillan, London.
Boresi, A. P., and K. P. Chong [1987], Elasticity in Engineering Mechanics,
Elsevier, New York.
Borkowski, A. [1988], Analysis of Skeletal Structural Systems in the Elastic
and Elastic-Plastic Range, Elsevier, Amsterdam.
Bridgman, P. W. [1923], Proc. Am. Acad. Arts Sci. 58, 163.
Bridgman, P. W. [1952], Studies in Large Plastic Flow and Fracture, McGrawHill, New York.
Budiansky, B. [1959], J. Appl. Mech. 26, 259.
Calladine, C. R. [1973], Int. J. Mech. Sci. 15, 593.
Casey, J. [1985], Int. J. Solids Struct. 21, 671.
Casey, J., and P. M. Naghdi [1980], J. Appl. Mech. 47, 672.
Casey, J., and P. M. Naghdi [1981], J. Appl. Mech. 48, 285.
Casey, J., and P. M. Naghdi [1983], Q. J. Mech. Appl. Math. 37, 231.
Ceradini, G. [1966], Meccanica 4, 77.
Cernocky, E. P., and E. Krempl [1979], Int. J. Non-Linear Mech. 14, 183.
Chaboche, J. L. [1977], Bull. Acad. Polon. Sci. Sér. Sci. Tech. 25, 33.
Chadwick, P., A. D. Cox, and H. G. Hopkins [1964], Philos. Trans. Roy.
Soc. London A256, 235.
Chakrabarty, J. [1987], Theory of Plasticity, McGraw-Hill, New York.
Chan, H. S. Y. [1969], J. Appl. Mech. 36, 73.
Chan, K. S., S. R. Bodner, K. P. Walker, and U. S. Lindholm [1984], in Proc.
2nd Symp. Nonlinear Constitutive Equations High-Temp. Appl. (Cleveland,
1984).
Chen, W. F. [1975], Limit Analysis and Soil Mechanics, Elsevier, Amsterdam.
Clifton, R. J. [1966], in Proc. 5th U.S. Natl. Cong. Appl. Mech. (Minneapolis, 1966), American Society of Mechanical Engineers, New York, p.
465.
Clifton, R. J. [1968], J. Appl. Mech. 35, 782.
Clifton, R. J. [1983], J. Appl. Mech. 50, 941.
Collins, I. F. [1969], J. Mech. Phys. Solids 17, 323.
Conroy, M. F. [1952], J. Appl. Mech. 19, 465.
References
503
Conroy, M. F. [1955], J. Appl. Mech. 22, 48.
Conroy, M. F. [1956], J. Appl. Mech. 23, 239.
Conroy, M. F. [1963], J. Méc. 2, 455.
Considère, F. [1891], Cong. Int. Procédés de Constr. (Paris, 1889), Vol. 3,
p. 371.
Cotter, B. A., and P. S. Symonds [1955], Proc. ASCE 81, 21.
Cottrell, A. H., and B. A. Bilby [1949], Proc. Phys. Soc. A62, 49.
Cowper, G. R. [1960], J. Appl. Mech. 47, 496.
Cox, A. D., and L. W. Morland [1959], J. Mech. Phys. Solids 7, 229.
Craggs, J. W. [1957], J. Mech. Phys. Solids 5, 115.
Cristescu, N. [1964], in Stress Waves in Anelastic Solids (IUTAM Symp.,
Providence, 1963, ed. H. Kolsky and W. Prager), Springer-Verlag, Berlin,
p. 118.
Cristescu, N. [1967], Dynamic Plasticity, North-Holland, Amsterdam.
Cristescu, N., and M. Predeleanu [1965], in Proc. 4th Int. Cong. Rheol.
(Providence, 1963, ed. E. H. Lee), Vol. 3, Wiley, New York, p. 79.
Dafalias, Y. F. [1975], On Cyclic and Anisotropic Plasticity, Ph.D. thesis,
Department of Civil Engineering, University of California, Berkeley.
Dafalias, Y. F. [1983], J. Appl. Mech. 50, 561.
Dafalias, Y. F. [1985a], in Plasticity Today (IUTAM Symp., Udine, 1983, ed.
A. Sawczuk and G. Bianchi), Elsevier Applied Science, London, p. 135.
Dafalias, Y. F. [1985b], J. Appl. Mech. 52, 865.
Dafalias, Y. F., and E. P. Popov [1975], Acta Mech. 21, 173.
Dantzig, G. B. [1963], Linear Programming and Extensions, Princeton University Press, Princeton, N.J.
Dashner, P. A. [1986], J. Appl. Mech. 53, 55.
De Juhasz, K. J. [1949], J. Franklin Inst. 248, 15, 113.
Derrington, M. G., and W. Johnson [1958], Appl. Sci. Res. A7, 408.
Donnell, L. H. [1930], Trans. ASME 52, 153.
Drucker, D. C. [1950], Q. Appl. Math. 7, 411.
Drucker, D. C. [1951], in Proc. 1st U.S. Natl. Cong. Appl. Mech., American
Society of Mechanical Engineers, New York, p. 487.
Drucker, D. C. [1953], J. Mech. Phys. Solids 1, 217.
Drucker, D. C. [1954a], J. Appl. Mech. 21, 71.
Drucker, D. C. [1954b], in Proc. 1st Midwestern Conf. Solid Mech. (Urbana,
1953), p. 158.
Drucker, D. C. [1956], J. Appl. Mech. 23, 509.
Drucker, D. C. [1959], J. Appl. Mech. 26, 101.
504
References
Drucker, D. C., and W. F. Chen [1968], in Engineering Plasticity(ed. J. Heyman and F. A. Leckie), Cambridge University Press, Cambridge, England,
p. 119.
Drucker, D. C., H. J. Greenberg, and W. Prager [1951], J. Appl. Mech. 18,
371.
Drucker, D. C., and H. G. Hopkins [1955], in Proc. 2nd U.S. Natl. Cong.
Appl. Mech. (Ann Arbor, 1954), American Society of Mechanical Engineers,
New York, p. 517.
Drucker, D. C., and W. Prager [1952], Q. Appl. Math. 10, 157.
Drucker, D. C., W. Prager, and H. J. Greenberg [1952], Q. Appl. Math. 9,
381.
Drucker, D. C., and R. T. Shield [1957], Q. Appl. Math. 15, 269.
Drucker, D. C., and R. T. Shield [1959], J. Appl. Mech. 26, 61.
Duwez, P. E., D. S. Clark, and H. F. Bohnenblust [1950], J. Appl. Mech. 17,
27.
Eason, G. [1960a], Appl. Sci. Res. A8, 53.
Eason, G. [1960b], Q. J. Mech. Appl. Math. 12, 334.
Eason, G., and R. T. Shield [1955], J. Mech. Phys. Solids 4, 53.
Engesser, F. [1889], Z. Archit. Ing.wesen 35, 455.
English, J. M. [1954], Trans. ASCE 119, 1143.
Eringen, A. C. [1962], Nonlinear Theory of Continuous Media, McGraw-Hill,
New York.
Florence, A. L. [1966], J. Appl. Mech. 33, 256.
Foulkes, J. [1953], Q. Appl. Math. 10, 347.
Foulkes, J. [1954], Proc. Roy. Soc. London A223, 482.
Fox, N. [1968], Q. J. Mech. Appl. Math. 21, 67.
Frank, F. C. [1951], Philos. Mag. 42, 809.
Freiberger, W. [1949], Austral. J. Sci. Res. A2, 354.
Freiberger, W. [1956a], Q. Appl. Math. 14, 259.
Freiberger, W. [1956b], J. Appl. Mech. 23, 576.
Freiberger, W., and B. Tekinalp [1956], J. Mech. Phys. Solids 4, 294.
Frémond, M., and A. Friaâ [1982], J. Méc. Théor. Appl. 1, 881.
Galin, L. A. [1949], Prikl. Mat. Mekh. 13, 285.
Gaydon, F. A., and H. Nuttall [1957], J. Mech. Phys. Solids 6, 17.
Geiringer, H. [1931], in Proc. 3rd Int. Cong. Appl. Mech. (Stockholm,
1930), Vol. 2, p. 185.
Geiringer, H. [1951], Proc. Natl. Acad. Sci. U.S.A. 37, 214.
Gerard, G., and H. Becker [1957], Handbook of Structural Stability, Part I,
References
505
NACA Tech. Note 3781.
Germain, P., Q. S. Nguyen, and P. Suquet [1983], J. Appl. Mech. 50, 1010.
Gilman, J. J. [1969], Micromechanics of Flow in Solids, McGraw-Hill, New
York.
Green, A. E., and P. M. Naghdi [1965], Arch. Ration. Mech. Anal. 18, 251.
Green, A. E., and P. M. Naghdi [1971], Int. J. Engrg. Sci. 9, 1219.
Green, A. E., and W. Zerna [1968], Theoretical Elasticity, Oxford University
Press, London.
Green, A. P. [1951], Philos. Mag. 42, 900.
Green, A. P. [1953], Q. J. Mech. Appl. Math. 6, 223.
Green, A. P. [1954a], J. Mech. Phys. Solids 3, 1.
Green, A. P. [1954b], J. Mech. Phys. Solids 3, 143.
Greenberg, H. J. [1949], Q. Appl. Math. 7, 85.
Greenberg, H. J., and W. Prager [1951], Proc. ASCE 77, Sep. 59.
Griggs, D. T. [1936], J. Geol. 44, 541.
Grigorian, S. S. [1960], Prikl. Mat. Mekh. 24, 1057.
Gvozdev, A. A. [1938], in Proc. Conf. Plast. Def.(in Russian), Akademiia
Nauk SSSR, Moscow, p. 19.
Hadamard, J. [1903], Leçons sur la propagation des ondes et les équations de
l’hydrodynamique, Hermann, Paris.
Halphen, B., and Q. S. Nguyen [1975], J. Méc. 14, 39.
Handelman, G. H. [1944], Q. Appl. Math. 1, 351.
Hart, E. W. [1976], J. Engrg. Matls. Technol. 98, 193.
Haupt, P. [1985], Int. J. Plast. 1, 303.
Haupt, P., and C. Tsakmakis [1986], Int. J. Plast. 2, 279.
Haythornthwaite, R. M., and R. T. Shield [1958], J. Mech. Phys. Solids 6,
127.
Helling, D. E., and A. K. Miller [1987], Acta Mech. 69, 9.
Hencky, H. [1923], Z. angew. Math. Mech. 3, 241.
Hencky, H. [1924], Z. angew. Math. Phys. 4, 323. 353.
Heyman, J. [1951], Q. Appl. Math. 8, 373.
Heyman, J. [1953], Struct. Engr. 31, 125.
Heyman, J. [1959], Proc. Instn. Civ. Engrs. 12, 39; Q. J. Mech. Appl.
Math. 12, 314.
Heyman, J. [1960], Int. J. Mech. Sci. 1, 121.
Heyman, J. [1971], Plastic Design of Frames, Cambridge University Press,
Cambridge, England.
Heyman, J. [1973], Int. J. Mech. Sci. 15, 845.
506
References
Heyman, J., and W. Prager [1958], J. Franklin Inst. 266, 339.
Hibbit, H. D., P. V. Marcal, and J. R. Rice [1970], Int. J. Solids Struct. 6,
1069.
Hill, R. [1948a], Q. J. Mech. Appl. Math. 1, 18.
Hill, R. [1948b], Proc. Roy. Soc. London A193, 281.
Hill, R. [1948c], J. Iron Steel Inst. 158, 177.
Hill, R. [1950], The Mathematical Theory of Plasticity, Oxford University
Press, London.
Hill, R. [1951], Philos. Mag. 42, 868.
Hill, R. [1952], Philos. Mag. 43, 353.
Hill, R. [1953], J. Mech. Phys. Solids 1, 265.
Hill, R. [1958], J. Mech. Phys. Solids 6, 236.
Hill, R. [1959], J. Mech. Phys. Solids 7, 371.
Hill, R. [1962], J. Mech. Phys. Solids 10, 1.
Hill, R., E. H. Lee, and S. J. Tupper [1947], Proc. Roy. Soc. LondonA, 188,
273.
Hill, R., and M. P. L. Siebel [1951], Philos. Mag. 42, 721.
Hill, R., and M. P. L. Siebel [1953], J. Mech. Phys. Solids 1, 207.
Hill, R., and S. J. Tupper [1948], J. Iron Steel Inst. 159, 353.
Hirsch, P. B. [1975], The Physics of Metals, Vol. 2: Defects(ed. P. B. Hirsch),
Cambridge University Press, Cambridge, England, p. 189.
Hodge, P. G., Jr. [1953], Div. Appl. Math. Report B11-22, Brown University,
Providence, R.I.
Hodge, P. G., Jr. [1954], J. Appl. Mech. 21, 336.
Hodge, P. G., Jr. [1955], J. Mech. Phys. Solids 3, 176.
Hodge, P. G., Jr. [1956], in Proc. 2nd Midwestern Conf. Solid Mech.
(Lafayette, 1955), p. 150.
Hodge, P. G., Jr. [1957a], in Proc. 9th Int. Cong. Appl. Mech. (Brussels,
1956), Vol. 8, p. 65.
Hodge, P. G., Jr. [1957b], J. Appl. Mech. 24, 453.
Hodge, P. G., Jr. [1959], Plastic Analysis of Structures, McGraw-Hill, New
York.
Hodge, P. G., Jr. [1963], Limit Analysis of Rotationally Symmetric Plates
and Shells, Prentice-Hall, Englewood Cliffs, N.J.
Hodge, P. G., Jr., and B. Paul [1957], in Proc. 3rd Midwestern Conf. Solid
Mech. (Ann Arbor, 1957), p. 29.
Hodge, P. G. Jr., and G. N. White, Jr. [1950], J. Appl. Mech. 17, 180.
Hohenemser, K., and W. Prager [1932], Z. angew. Math. Mech. 12, 1.
References
507
Hopkins, H. G. [1957], Proc. Roy. Soc. London A241, 153.
Hopkins, H. G., and W. Prager [1953], J. Mech. Phys. Solids 2, 1.
Hopkins, H. G., and W. Prager [1954], Z. angew. Math. Phys. 5, 317.
Hopkins, H. G., and W. Prager [1955], J. Appl. Mech. 22, 372.
Hopkins, H. G., and A. J. Wang [1954], J. Mech. Phys. Solids 3, 117.
Horne, M. R. [1950], J. Instn. Civ. Engrs. 34, 174.
Horne, M. R. [1954], Proc. Instn. Civ. Engrs. 3, 51.
Horne, M. R. [1979], Plastic Theory of Structures, 2nd ed., Pergamon Press,
Oxford.
Hudson, J. A., E. T. Brown, and C. Fairhurst [1971], in Proc. 13th Symp.
Rock Mech. (Urbana, 1970), p. 180.
Hull, D., and D. J. Bacon [1984], Introduction to Dislocations, 3rd ed., Pergamon Press, Oxford.
Hutchinson, J. W. [1972], J. Appl. Mech. 39, 155.
Hutchinson, J. W. [1974], in Advances in Applied Mechanics(ed. C.-S. Yih),
Vol. 14, Academic Press, New York, p. 67.
Il’iushin A. A., [1954], Prikl. Mat. Mekh. 18, 641.
Il’iushin A. A., [1961], Prikl. Mat. Mekh. 25, 503.
Imegwu, E. O. [1960], J. Mech. Phys. Solids 8, 141.
Ishlinskii, I. U. [1954], Ukr. Mat. Zh. 6, 314.
Iwan, W. D. [1967], J. Appl. Mech. 34, 612.
Johansen, K. W. [1932], Proc. Int. Assn. Bridge and Struc. Engrg. 1, 277.
Johnson, D. [1988], Int. J. Solids Struct. 24, 321.
Johnson, W., and P. B. Mellor [1973], Engineering Plasticity, Van Nostrand
Reinhold, London.
Johnson, W., R. Sowerby, and R. Venter [1982], Plane Strain Slip-Line Theory and Bibilography, Pergamon Press, Oxford.
Jones, N. [1975], Shock Vib. Digest 8, 89.
Josselin de Jong, G. [1965], in Proc. IUTAM Symp. on Rheology and Soil
Mechanics (Grenoble, 1964), p. 69.
Josselin de Jong, G. [1974], in Proc. Symp. on the Role of Plasticity in Soil
Mechanics (Cambridge, England, 1973), p. 12.
Kachanov, L. M. [1954], Prikl. Mat. Mekh. 19,
Kachanov, L. M. [1971], Foundations of Theory of Plasticity, North-Holland,
Amsterdam.
Kadashevich, Yu. I., and V. V. Novozhilov [1958], Prikl. Mat. Mekh. 22,
104.
Kaliski, S., and E. Wlodarczyk [1967], Arch. Mech. Stos. 19, 433.
508
References
Kármán, T. v. [1910], VDI (Ver. deut. Ing.) Forschungsh. 81.
Kármán, T. v. [1911], Z. Ver. deut. Ing. 55, 1749.
Kármán, T. v., and P. Duwez [1950], J. Appl. Phys. 21, 987.
Kazinczy, G. [1914], Betonszemle 2, 68.
Kestin, J., and Rice, J. R. [1970], in A Critical Review of Thermodynamics
(ed. E. B. Stuart, B. Gal-Or, and A. J. Brainard), Mono Book Corp.,
Baltimore, p. 275.
Kliushnikov, V. D. [1959], Prikl. Mat. Mekh. 23, 405.
Kobayashi, S., S.-I. Oh, and T. Altan [1989], Metal Forming and the FiniteElement Method, Oxford University Press, London.
Kochendörfer, A. [1938], Z. Phys. 108, 244.
Kocks, U. F. [1987], in Unified Constitutive Equations for Creep and Plasticity (ed. A. K. Miller), Elsevier Applied Science, London, p. 1.
Koiter, W. T. [1953a], Q. Appl. Math. 11, 350.
Koiter, W. [1953b], Anniversary Volume on Applied Mechanics Dedicated to
B. Biezeno, H. Stam, Haarlem, p. 232.
Koiter, W. T. [1956], Proc. Kon. Ned. Akad. Wet. B59, 24.
Koiter, W. T. [1960], Progress in Solid Mechanics (ed. I. N. Sneddon and R.
Hill), Vol. 1, North-Holland, Amsterdam, p. 206.
Kolsky, H., and L. S. Douch [1962], J. Mech. Phys. Solids 10195.
König, J. A. [1987], Shakedown of Elastic-Plastic Structures, Elsevier, Amsterdam.
Kotsovos, M. D., and H. K. Cheong [1984], ACI J. 81, 358.
Krajcinovic, D. [1973], Shock Vibr. Digest 5, 1.
Kratochvı́l, J. [1973], Acta Mech. 16, 127.
Krempl, E. [1987], Acta Mech. 69, 25.
Krempl, E., J. J. McMahon, and D. Yao [1986], Mech. Matls. 5, 35.
Krieg, R. D. [1975], J. Appl. Mech. 42, 641.
Krieg, R. D., J. C. Swearengen, and W. B. Jones [1987], in Unified Constitutive Equations for Creep and Plasticity (ed. A. K. Miller), Elsevier Applied
Science, London, p. 245.
Krieg, R. D., J. C. Swearengen and R. W. Rohde [1978], in Inelastic Behavior of Pressure Vessel and Piping Components (ed. T. Y. Chang and E.
Krempl), American Society of Mechanical Engineers, New York, p. 15.
Kröner, E. [1960], Arch. Ration. Mech. Anal. 4, 273.
Lee, E. H. [1950], Proc. 3rd Symp. Appl. Math.(Ann Arbor, 1949), McGrawHill, New York, p. 213.
Lee, E. H. [1952], Philos. Mag. 43, 549.
References
509
Lee, E. H. [1953], Q. Appl. Math. 10, 335.
Lee, E. H. [1969], J. Appl. Mech. 36, 1.
Lee, E. H., and D. T. Liu [1967], J. Appl. Phys. 38, 19.
Lee, E. H., and P. S. Symonds [1952], J. Appl. Mech. 19, 308.
Lee, E. H., and S. J. Tupper [1954], J. Appl. Mech. 21, 63.
Lehmann, Th. [1972], Ing.-Arch. 41, 297.
Lenskii, V. S. [1948], Prikl. Mat. Mekh. 12, 165.
Leth, C.-F. A. [1954], Div. Appl. Math. Report A11-107, Brown University,
Providence, R.I.
Lode, W. [1925], Z. angew. Math. Mech. 5, 142.
Loret, B. [1983], Mech. Matls. 2, 287.
Love, A. E. H. [1927], Mathematical Theory of Elasticity, 4th ed., Cambrdige
University Press, Cambridge, England; reprinted by Dover, New York.
Lubahn, J. D., and R. P. Felgar [1961], Plasticity and Creep of Metals, Wiley,
New York.
Lubliner, J. [1964], J. Mech. Phys. Solids 12, 59.
Lubliner, J. [1965], J. Méc. 4, 111.
Lubliner, J. [1972], Int. J. Non-Linear Mech. 7, 237.
Lubliner, J. [1974], Int. J. Solids Struct. 10, 310.
Lubliner, J. [1986], Mech. Matls. 5, 29.
Lubliner, J., and M. Valathur [1969], Int. J. Solids Struct. 5, 1275.
Ludwik, P. [1909], Elemente der Technologischen Mechanik, Springer-Verlag,
Berlin.
Lunts, Ya. L. [1949], Prikl. Mat. Mekh. 13, 55.
Maier, G. [1969], Int. J. Solids Struct. 5, 261.
Maier, G. [1970], J. Mech. Phys. Solids 18, 319.
Maier, G. [1983], Mech. Res. Comm. 10, 45.
Maier, G., R. Srinivasam, and M. A. Save [1972], in Proc. Int. Symp.
Computer-Aided Structural Design (Coventry, 1972), Vol. 1, p. 32.
Malvern, L. E. [1951a], Q. Appl. Math. 8, 405.
Malvern, L. E. [1951b], J. Appl. Mech. 18, 203.
Mandel, J. [1962], J. Méc. 1, 30.
Mandel, J. [1964], in Stress Waves in Anelastic Solids(IUTAM Symp., Providence, 1963, ed. H. Kolsky and W. Prager), Springer-Verlag, Berlin, p.
331.
Mandel, J. [1967], C. R. Acad. Sci. Paris 264A, 133.
Mandel, J. [1972], Plasticité Classique et Viscoplasticité (CISM, Udine, 1971),
Springer-Verlag, Vienna–New York.
510
References
Mandel, J. [1973], Int. J. Solids Struct. 9, 725.
Mandel, J. [1976], Mech. Res. Comm. 3, 251, 483.
Mandel, J., J. Zarka, and B. Halphen [1977], Mech. Res. Comm. 4, 309.
Manjoine, M. J. [1944], J. Appl. Mech. 11, 211.
Manolakos, D. E., and A. G. Mamalis [1986], Int J. Mech. Sci. 28, 815.
Marcal, P. V. [1965], Int. J. Mech. Sci. 7, 229, 841.
Markov, A. A. [1947], Prikl. Mat. Mekh. 11, 339.
Marsden, J. E., and T. J. R. Hughes [1983], Mathematical Foundations of
Elasticity, Prentice-Hall, Englewood Cliffs, N.J.
Martin, J. B. [1975], J. Mech. Phys. Solids 23, 123.
Martin, J. B. [1980], in Variational Methods in the Mechanics of Solids (ed.
S. Nemat-Nasser), Pergamon Press, Oxford, p. 278.
Massonnet, C. E., and M. A. Save [1965], Plastic Analysis and Design, Blaisdell, Waltham, Mass.
McMeeking, R. M., and J. R. Rice [1975], Int. J. Solids Struct. 11, 601.
Melan, E. [1938], Ing.-Arch. 9, 116.
Mendelson, A. [1968], Plasticity: Theory and Applications, Macmillan, New
York.
Michell, J. H. [1900], Proc. London Math. Soc. 31, 141.
Miller, A. K. [1976], J. Engrg. Matls. Technol. 98, 97.
Mises, R. v. [1913], Göttinger Nachr. Math.-Phys. Kl., 582.
Mises, R. v. [1926], Z. angew. Math. Mech. 6, 199 (footnote to paper by F.
Schleicher).
Mises, R. v. [1928], Z. angew. Math. Mech. 8, 161.
Moreau, J. J. [1963], C. R. Acad. Sci. Paris 257A, 4117.
Moreau, J. J. [1970], C. R. Acad. Sci. Paris 271A, 608.
Moreau, J. J. [1976], in Applications of Methods of Functional Analysis to
Problems in Mechanics (ed. P. Germain and B. Nayroles), Springer-Verlag,
Vienna–New York, p. 56.
Mortelhand, I. M. [1987], Heron 32, 115.
Mróz, Z. [1967], J. Mech. Phys. Solids 15, 163.
Munro, J. [1979], Engineering Plasticity by Mathematical Programming (Proc.
NATO Adv. Study Inst., Waterloo, Canada, 1977, ed. by M. Z. Cohn and
G. Maier), Pergamon Press, New York, Ch. 7.
Nabarro, F. R. N. [1950], Some Recent Developments in Rheology, British
Rheologists’ Club, London.
Nabarro, F. R. N. [1975], in The Physics of Metals, Vol. 2: Defects (ed. P.
B. Hirsch), Cambridge University Press, Cambridge, England, p. 152.
References
511
Nadai, A. [1923], Z. angew. Math. Mech. 5, 1.
Nadai, A. [1950], The Theory of Flow and Fracture of Solids, McGraw-Hill,
New York.
Naghdi, P. M., and J. A. Trapp [1975], Int. J. Eng. Sci. 13, 785.
Nagtegaal, J. C. [1982], Computer Methods Appl. Mech. Engrg. 33, 469.
Nagtegaal, J. C., D. M. Parks, and J. R. Rice [1974], Computer Methods
Appl. Mech. Engrg. 4, 153.
Neal, B. G. [1963], The Plastic Methods of Structural Analysis, Chapman &
Hall, London.
Neal, B. G., and P. S. Symonds [1951], J. Instn. Civ. Engrs. 35, 21.
Neal, B. G., and P. S. Symonds [1952], Proc. Instn. Civ. Engrs. 1, 58.
Needleman, A. [1972], J. Mech. Phys. Solids 20, 111.
Nguyen, Q. S., and H. D. Bui [1974], J. Méc. 13, 321.
Niordson, F. I. [1985], Shell Theory, North-Holland, Amsterdam.
Noll, W. [1955], J. Ration. Mech. Anal. 4, 3.
Nowacki, W. K. [1978], Stress Waves in Non-Elastic Solids, Pergamon Press,
Oxford.
Oden, J. T. [1972], Finite Elements of Nonlinear Continua, McGraw-Hill,
New York.
Odqvist, F. K. G. [1933], Z. angew. Math. Phys. 13, 360.
Onat, E. T., and R. M. Haythornthwaite [1956], J. Appl. Mech. 23, 49.
Onat, E. T., and W. Prager [1953], J. Mech. Phys. Solids 1, 77.
Onat, E. T., and W. Prager [1954], in Proc. 1st Midwestern Conf. Solid.
Mech. (Urbana, 1953), p. 40.
Onat, E. T., and W. Prager [1955], Ingenieur 67, 0.46.
Onat, E. T., and R. T. Shield [1955], in Proc. 2nd U.S. Natl. Cong. Appl.
Mech. (Ann Arbor, 1954), American Society of Mechanical Engineers, New
York, p. 535.
Onat, E. T., W. Schumann, and R. T. Shield [1957], Z. angew. Math. Phys.
8, 485.
Orowan, E. [1934], Z. Phys. 89, 605.
Orowan, E. [1944], Proc. Instn. Mech. Engrs. 151, 133 (discussion of paper
by H. O’Neill).
Ortiz, M., and E. P. Popov [1985], Int. J. Num. Methods Engrg. 21, 1561.
Owen, D. R. [1968], Arch. Ration. Mech. Anal. 31, 91.
Owen, D. R. J., and E. J. Hinton [1980], Finite Elements in Plasticity: Theory and Practice, Pineridge Press, Swansea.
Pastor, J. [1976], Application de l’analyse limite à l’étude de la stabilité des
512
References
pentes et des talus, Thèse, Université de Grenoble (France).
Parkes, E. W. [1955], Proc. Roy. Soc. London A228, 462.
Perzyna, P. [1958], Arch. Mech. Stos. 10, 635.
Perzyna, P. [1963], Q. Appl. Math. 20, 321.
Perzyna, P. [1971], in Advances in Applied Mechanics(ed. by C.-S. Yih), Vol.
11, Academic Press, New York, p. 313.
Phillips, A. [1972], AIAA J. 10, 951.
Phillips, A. [1986], Int. J. Plast. 2, 315.
Phillips, A., and H. Moon [1977], Acta Mech. 27, 91.
Pinsky, P. M., M. Ortiz, and K. S. Pister [1983], Computer Methods Appl.
Mech. Engrg. 40, 137.
Pipkin, A. C., and R. S. Rivlin [1965], Z. angew. Math. Mech. 16, 313.
Prager, W. [1942], Duke Math. J. 9, 228.
Prager, W. [1947], J. Appl. Phys. 18, 375.
Prager, W. [1948], in Courant Anniversary Volume, Interscience, New York,
p. 289.
Prager, W. [1955a], Proc. Instn. Mech. Engrs. 169, 41.
Prager, W. [1955b], Ingenieur 67, 0.141.
Prager, W. [1956a], J. Appl. Mech. 23, 493.
Prager, W. [1956b], in Proc. 8th Int. Cong. Appl. Mech. (Istanbul, 1952),
Vol. 2, p. 65.
Prager, W. [1959], An Introduction to Plasticity, Addison-Wesley, Reading,
Mass.
Prager, W. [1961], An Introduction to Mechanics of Continua, Ginn, Boston.
Prager, W., and P. G. Hodge, Jr. [1951], Theory of Perfectly Plastic Solids,
Wiley, New York.
Prandtl, L. [1903], Phys. Z. 4, 758.
Prandtl, L. [1920], Göttinger Nachr. Math.-Phys. Kl., 74.
Prandtl, L. [1923], Z. angew. Math. Mech. 3, 401.
Prandtl, L. [1924], in Proc. 1st Int. Cong. Appl. Mech.(Delft, 1924), p. 43.
Rabotnov, Yu. N., [1969], Creep Problems in Structural Members, NorthHolland, Amsterdam.
Radenkovic, D. [1961], C. R. Acad. Sci. Paris 252, 4103.
Radenkovic, D. [1962], in Sém. de Plasticité (Ecole Polytechnique, Paris,
1961), P.S.T. Ministère de l’Air No. N.T. 116.
Rakhmatulin, Kh. A. [1945], Prikl. Mat. Mekh. 9, 91, 449.
Rakhmatulin, Kh. A. [1948], Prikl. Mat. Mekh. 12, 39.
Rakhmatulin, Kh. A., and G. S. Shapiro [1948], Prikl. Mat. Mekh. 12, 369.
References
513
Raniecki, B. [1979], Bull. Acad. Pol. Sci. Sér. Sci. Tech. 27, 391 [721].
Read, H. E., and G. A. Hegemier [1984], Mech. of Matls. 3, 271.
Read, W. T., Jr. [1953], Dislocations in Crystals, McGraw-Hill, New York.
Reed, K. W., and S. N. Atluri [1985], Int. J. Plast. 1, 63.
Reuss, A. [1930], Z. angew. Math. Mech. 10, 266.
Rice, J. R. [1970], J. Appl. Mech. 37, 728.
Rice, J. R. [1971], J. Mech. Phys. Solids 19, 433.
Roscoe, K. H. [1953], in Proc. 3rd Int. Conf. Soil Mech. Found. Engrg.
(Switzerland, 1953), Vol. 1, p. 186.
Rozvany, G. I. N. [1976], Optimal Design of Flexural Systems, Pergamon
Press, Oxford.
Rubin, M. B. [1986], Int. J. Engrg. Sci. 24, 1083.
Rubinstein, R., and Atluri, S. N. [1983], Computer Methods Appl. Mech.
Engrg. 36, 277.
Sacchi, G., and M. A. Save [1968], Meccanica 3, 43.
Salençon, J. [1972], Ann. I.T.B.T.P, No. 295-296, 90.
Salençon, J. [1973], in Proc. Int. Symp. Foundations of Plasticity (Warsaw,
1972, ed. A. Sawczuk), Noordhoff, Leyden.
Salençon, J. [1977], Applications of the Theory of Plasticity in Soil Mechanics, Wiley, Chichester, England.
Salvadori, M. G., and F. L. DiMaggio [1953], Q. Appl. Math. 11, 223.
Save, M. A., and C. E. Massonnet [1972], Plastic Analysis of Plates, Shells
and Disks, North-Holland, Amsterdam.
Save, M. A., and W. Prager [1963], J. Mech. Phys. Solids 11, 255.
Schleicher, F. [1926], Z. angew. Math. Mech. 6, 199.
Schmid, E. [1924], in Proc. 1st Int. Cong. Appl. Mech. (Delft, 1924), p.
342.
Seiler, J. A., B. A. Cotter, and P. S. Symonds [1956], J. Appl. Mech. 23,
515.
Seiler, J. A., and P. S. Symonds [1954], J. Appl. Phys. 25, 556.
Shaffer, B. W., and R. N. House [1955], J. Appl. Mech. 22, 305.
Shaffer, B. W., and R. N. House [1957], J. Appl. Mech. 24, 447.
Shakir-Khalil, H., and G. S. Tadros [1973], Struct. Engrg. 51, 239.
Shanley, F. S. [1947], J. Aeronaut. Sci. 14, 261.
Simmons, J. A., F. Hauser, and J. E. Dorn [1962], Univ. Calif. Pubs. Engrg.
5, 177.
Simo, J. C. [1988a], Computer Methods Appl. Mech. Engrg. 66, 199.
Simo, J. C. [1988b], Computer Methods Appl. Mech. Engrg. 68, 1.
514
References
Simo, J. C., and T. J. R. Hughes [1988], Elastoplasticity and Viscoplasticity,
Computational Aspects, Stanford Univ., Dept. of Appl. Mech.
Simo, J. C., and M. Ortiz [1985], Computer Methods Appl. Mech. Engrg.
49, 221.
Simo, J. C., and K. S. Pister [1984], Computer Methods Appl. Mech. Engrg.
46, 201.
Simo, J. C., and R. L. Taylor [1985], Computer Methods Appl. Mech. Engrg.
48, 101.
Simo, J. C., and R. L. Taylor [1986], Int. J. Num. Methods Engrg. 22, 649.
Sokolnikoff, I. S. [1956], Mathematical Theory of Elasticity, 2nd ed., McGrawHill, New York.
Sokolovskii, V. V. [1942], Prikl. Mat. Mekh. 6, 241.
Sokolovskii, V. V. [1945], Prikl. Mat. Mekh. 9, 343.
Sokolovskii, V. V. [1948], Prikl. Mat. Mekh. 12, 261.
Southwell, R. V. [1915], Philos. Mag. 29, 67.
Steele, M. C. [1954], J. Mech. Phys. Solids 3, 156.
Sternglass, E. J., and D. A. Stuart [1953], J. Appl. Mech. 20, 1953.
Stickforth, J. [1986], Int. J. Plast. 2, 347.
Symonds, P. S., and W. T. Fleming, Jr. [1984], Int. J. Impact Engrg. 2, 1.
Symonds, P. S., and C.-F. A. Leth [1954], J. Mech. Phys. Solids 2, 92.
Symonds, P. S., and T. J. Mentel [1958], J. Mech. Phys. Solids 6, 186.
Symonds, P. S., and B. G. Neal [1951], J. Franklin Inst. 252, 383, 469.
Taylor, D. W. [1937], J. Boston. Soc. Civ. Engrs. 24, 197.
Taylor, D. W. [1948], Fundamentals of Soil Mechanics, Wiley, New York.
Taylor, G. I. [1934], Proc. Roy. Soc. London A145, 362, 388.
Taylor, G. I. [1938], J. Inst. Metals 62, 307.
Taylor, G. I. [1946], J. Instn. Civ. Engrs. 26, 486.
Taylor, G. I. [1947], Proc. Roy. Soc. London A191, 441.
Taylor, G. I. [1948], Proc. Roy. Soc. London A194, 289.
Taylor, G. I. [1958], in Scientific Papers (ed. G. K. Batchelor), Vol. 2,
Cambridge University Press, Cambridge, England, p. 467.
Taylor, G. I., and H. Quinney [1931], Philos. Trans. Roy. Soc. London
A230, 323.
Telles, J. C. F., and C. A. Brebbia [1979], Appl. Math. Modelling 3, 466.
Temam, R. [1985], Mathematical Problems in Plasticity, Gauthier-Villars,
Paris.
Thomas, T. Y. [1958], J. Ration. Mech. Anal. 5, 251.
Thomas, T. Y. [1961], Plastic Flow and Fracture in Solids, Academic Press,
References
515
New York.
Timoshenko, S., and J. M. Gere [1961], Theory of Elastic Stability, 2nd ed.,
McGraw-Hill, New York.
Timoshenko, S. P., and J. N. Goodier [1970], Theory of Elasticity, 3rd ed.,
McGraw-Hill, New York.
Timoshenko, S., and S. Woinowsky-Krieger [1959], Theory of Plates and
Shells, 2nd ed., McGraw-Hill, New York.
Ting, T. C. T. [1969], J. Appl. Mech. 36, 203.
Ting, T. C. T., and N. Nan [1969], J. Appl. Mech. 36, 189.
Ting, T. W. [1966a], J. Math. Mech. 15, 15.
Ting, T. W. [1966b], Trans. Am. Math. Soc. 123, 1966.
Ting, T. W. [1967], Arch. Ration. Mech. Anal. 25, 342.
Ting, T. W. [1969a], Arch. Ration. Mech. Anal. 34, 228.
Ting, T. W. [1969b], J. Math. Mech. 19, 531.
Ting, T. W. [1971], Indiana Univ. Math. J. 20, 1047.
Tran-Cong, T. [1985], Ing.-Arch. 55, 13.
Truesdell, C. [1984], Rational Thermodynamics, Springer-Verlag, New York.
Truesdell, C., and W. Noll [1965], The Nonlinear Field Theories, in Handbuch
der Physik (ed. S. Flügge) Vol. III/3, Springer-Verlag, Berlin.
Truesdell, C., and R. A. Toupin [1960], The Classical Field Theories, in
Handbuch der Physik (ed. S. Flügge) Vol. III/1, Springer-Verlag, Berlin.
Turner, L. B. [1909], Trans. Cambridge Philos. Soc. 21, 377.
Valanis, K. C. [1971], Arch. Mech. 23, 517.
Valanis, K. C. [1980], Arch. Mech. 32, 171.
Valanis, K. C. [1985], J. Appl. Mech. 52, 649.
Walker, K. P. [1981], NASA Report CR-165533.
Wang, A. J. [1955], J. Appl. Mech. 22, 375.
Wang, A. J., and H. G. Hopkins [1954], J. Mech. Phys. Solids 3, 22.
Washizu, K. [1958], J. Math. Phys. 36, 306.
Washizu, K. [1975], Variational Methods in Elasticity and Plasticity, 2nd ed.,
Pergamon Press, Oxford.
Watanabe, O., and S. N. Atluri [1986], Int. J. Plast. 2, 37, 107.
Wilkins, M. L. [1964], in Methods of Computational Physics, Vol. 3 (ed. B.
Alder et al.), Academic Press, New York.
Winzer, A., and G. F. Carrier [1948], J. Appl. Mech. 15, 261.
Winzer, A., and G. F. Carrier [1949], J. Appl. Mech. 16, 346.
Woods, L. C. [1981], Q. Appl. Math. 39, 119; Bull. Inst. Math. Appl. 17,
98.
516
References
Yao, D., and E. Krempl [1985], Int. J. Plast. 1, 259.
Zaid, M. [1959]. J. Appl. Mech. 26, 462.
Ziegler, H. [1959], Q. Appl. Math. 17, 55.
Zienkiewicz, O. C. [1977], The Finite Element Method, 3rd ed., McGraw-Hill,
London.
Zienkiewicz, O. C., and I. Cormeau [1974], Int. J. Num. Methods Engrg. 8,
821.
Zienkiewicz, O. C., and R. L. Taylor [1989], The Finite Element Method, 4th
ed., Vol. 1, McGraw-Hill, London.
Zienkiewicz, O. C., S. Valliappan, and I. P. King [1969], Int. J. Num. Methods Engrg. 1, 75.