Fast Guide
Step 1. Set the center number, which is used to control and remotely monitor the watch
Format: pw,123456#,center,mobile phone number#
Remark:
-the SMS commands don’t allow any space
-the mobile phone number is the mobile phone, which you use to send SMS to the watch.
Step 2, Set the apn, which is used to combine the watch SIM card to our web platform so that they
could communication via GPRS.
Format: apn,apn name,apn user,apn password#
Remark:
-If your apn is without APN user and password, then the right format is: apn,apn name#
Eg, in China Telecom, the APN is cmnet,without user and password, then the SMS command is:
apn,cmnet#
Eg,in Nigeria MTN, APN:web.gprs.mtnnigeria.net, Login Info:web:web ,then the SIMS command
is: apn, web.gprs.mtnnigeria.net,web,web#
Step 3,After you complete step and step 2 succeed, then you can go track via our web tracking
platform now:
http://www.track188.com/
ID/IMEI：1451319629 (ID/IMEI is written inside of the gift box, on the inner white paper)(if you can’t find
the ID/IMEI still, please send: test # to get it.
Password：123456 (Default password is 123456)
Comparison List of GPS Watch Tracker commands (Model: T19G)
1, All the commands letter in lower case format.
2, All the setting or checking commands will be replied with related content by SMS.
3, If successful, it will reply: Set successfully! If no, you need to re-send it.
Settings as below:
1
Center Number
pw,password,center,number#
pw,123456,center, 13600000000#
2
Slave Number
pw,password ,slave,numbers#
pw,123456,slave, 136111111111#
Delete
1.pw,device password,center,d#
Center Number
2.pw,device password,slave,d#
3
4
5
SOS Number
Setting
Delete SOS
Number
pw,123456,center, d#
1.sos1,numbers#
1.sos1,136222222222#
2.sos2,numbers#
2.sos2,136333333333#
3.sos3,numbers#
3.sos3,138444444444#
1.sos1#
1.sos1#
2.sos2#
2.sos2#
3.sos3#
3.sos3#
apn,apn name,apn user,apn
Eg, China Mobile APN=cmnet:
password,#
apn,cmnet#
6
APN Setting
7
Server Setting
ip,ip adress,port,port number#
ip,115.29.228.122,port,7018#
8
Work Mode
1:m1,t#(GPS has been working)
1. m1,20#
Setting
2: m2,t# (Power Saving Mode)
2. m2,600#
3: m3,t# (LBS Mode)
3. m3,120#
4, m4# (Disable GPRS Mode)
4. m4#
(”t” GPRS upload time interval)
9
Reboot Device
reset#
reset#
10
Modify password
pw,new password( 6 digits)#
pw,888888#
GPRS upload
11
time interval
setting
12
Factory setting
upload,t#
upload,300#
15<t<65535
factory#
factory#
langx,zone,n#
13
Language and
(x=0,is English;x=1,is Chinese;
time zone
”n”is time zone
setting
Western Time Zone=-n
1.lang,0,zone,-3#
2.lang,1,zone,+8#
Eastern Time Zone=+n
monitor,13800138000#
Note:
14
Monitor Number
Setting
monitor,numbers#
1, Need to set the monitor NO. in
(When the pre-set number call
advance.
in, can be monitored)
2,Terminal Sim card need to open
Dialer-Identification
function
at
first.
url#
Location
15
checking
(Get Google Map
Feedback:
url#
link)
location:Course:000,Speed:000.00,2013-09-30
02:58:21,
http://maps.google.com/maps?q=N22.540062,E114.077
652
The device will reply you a address,if not will reply
16
Address tracking
Where#
you”unable to get GPS data correctly, pls try again!”
This function need support by platform
Feedback:
id:1308080030
ip:124.232.150.158
port:9500
17
Check parameter
test#
AGPS:9
GPS:3
GPS fixed:0
GSM singal:100
battery:0
GPRS:1