KEMENTERIAN PENDIDIKAN NASIONAL
INSTITUT PERTANIAN BOGOR
Kampus IPB Darmaga, Bogor 16680
Telepon (0251) 8622642 Pes. 154/157, Fax. (0251) 8622713
BERITA ACARA
RAPAT PENJELASAN PEKERJAAN
Nomor
Tanggal
Pekerjaan
Kode Kegiatan
Nama Kegiatan
Lampiran
:
:
:
:
:
:
07/I3.24.4/PanPB/BAPP/Lab/2010
9 Juli 2010
Pengadaan Alat Laboratorium
2596.01180.532111
Penyelenggaraan Koordinasi Ketahanan Pangan
Uraian perubahan
Pada hari ini Jum’at, tanggal sembilan, bulan Juli, tahun dua ribu sepuluh, bertempat
di Ruang Sidang Senat Gedung Andi Hakim Nasoetion Lt. 6, Kampus IPB Darmaga
Bogor, dimulai pukul 13.30 WIB, berdasarkan pengumuman pelelangan nomor :
07/I3.24.4/PanPB/Lab/2010, tanggal 5 Juli 2010 Panitia Pengadaan Barang dan Jasa
Non Konstruksi mengadakan rapat penjelasan pekerjaan Pengadaan Alat Laboratorium
anggaran DIPA IPB Tahun 2010, dengan uraian sebagai berikut :
A. Rapat dipimpin oleh : Ir. Heri Purwanto
Jabatan
: Ketua Panitia
Panitia yang hadir :
1. Susanto Yudharianto
2. Etty Sariwati, ST, M.Si
3. Wahari Sulistiyo A, SE
4. Arif Munandar
B. Perusahaan yang telah mendaftar dan mengambil dokumen sebanyak 29 (dua
puluh Sembilan) perusahaan dan yang menghadiri/mengikuti rapat penjelasan
pekerjaan sebanyak 22 (dua puluh dua) perusahaan (daftar hadir terlampir).
C. Pokok-pokok penjelasan :
1. Instruksi Kepada Peserta Pengadaan (IKPP)
2. Lembar Data Pengadaan (LDP)
3. Penjelasan Teknis
4. Penjelasan Spesifikasi Barang/Jasa
5. Form Kualifikasi
D. Hasil rapat penjelasan pekerjaan, perubahan dan penambahannya secara rinci
sebagaimana dalam lampiran berita acara ini.
E. Rapat penjelasan pekerjaan ditutup pada pukul 16.15 WIB.
1 Lampiran : Berita Acara Rapat Penjelasan Pekerjaan Pengadaan Alat Laboratorium
Nomor
: 07/I3.24.4/PanPB/BAPP/Lab/2010, tanggal 9 Juli 2010
BAB I
Pengumuman Pengadaan
Tetap/Jelas
BAB II
Instruksi Kepada Peserta Pengadaan (IKPP)
A. UMUM
1. Lingkup Pekerjaan
1.1. Tetap/Jelas
1.2. Tetap/Jelas
2. Sumber Dana
2.1. Tetap/Jelas 3. Peserta Pengadaan yang Layak
3.1.
3.2.
3.3.
3.4.
3.5.
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
4. Persyaratan Kualifikasi Peserta Pengadaan
4.1. Tetap/Jelas
a. Tetap/Jelas
b. Tetap/Jelas
c. Tetap/Jelas
d. Tetap/Jelas
e. Tetap/Jelas
f. Tetap/Jelas
g. Tetap/Jelas
h. Tetap/Jelas
i. Tetap/Jelas
j. Tetap/Jelas
k. Tetap/Jelas
4.2. Tetap/Jelas
5. Larangan Korupsi, Kolusi, dan Nepotisme (KKN) serta Penipuan
5.1. Tetap/Jelas
a. Tetap/Jelas
b. Tetap/Jelas
c. Tetap/Jelas
5.2. Tetap/Jelas
a. Tetap/Jelas
b. Tetap/Jelas
5.3. Tetap/Jelas
a. Tetap/Jelas
b. Tetap/Jelas
5.4. Tetap/Jelas
3 6. Pendayagunaan Produksi Dalam Negeri
6.1. Tetap/Jelas
6.2. Tetap/Jelas
a. Tetap/Jelas
b. Tetap/Jelas
7. Satu Penawaran Tiap Peserta Pengadaan
7.1
Tetap/Jelas B. Dokumen Pemilihan 8. Isi Dokumen Pemilihan
8.1. Tetap/Jelas
8.2. Tetap/Jelas
9. Penjelasan Dokumen Pemilihan
9.1. Tetap/Jelas
9.2. Tetap/Jelas
9.3. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
d) Tetap/Jelas
e) Tetap/Jelas
f) Tetap/Jelas
g) Tetap/Jelas
h) Tetap/Jelas
9.4. Tetap/Jelas
9.5. Tetap/Jelas
9.6. Tetap/Jelas
10. Perubahan Dokumen Pemilihan
10.1. Tetap/Jelas
10.2. Tetap/Jelas
C.
Penyiapan Penawaran
11. Biaya dalam Penyiapan Penawaran
11.1. Tetap/Jelas
12. Bahasa Penawaran
12.1. Tetap/Jelas
12.2. Tetap/Jelas
12.3. Tetap/Jelas
4 13. Dokumen Penawaran
13.1. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
d) Tetap/Jelas
e) Tetap/Jelas
f) Tetap/Jelas, ditambah Surat Tanda Pendaftaran Sebagai Distributor
Barang Produksi Luar Negeri, dari Deperdag
g) Tetap/Jelas
h) Tetap/Jelas
i) Tetap/Jelas ditambah : - SPT Masa PPh Pasal 21 dan 25 bulan Maret,
April dan Mei 2010
- SPT Masa PPN bulan Maret, April dan Mei
2010
- SPT PPh Badan Pasal 29 Tahun 2009
- Surat Keterangan Fiskal Tahun 2009
14. Harga Penawaran
14.1. Tetap/Jelas
a) Tetap/Jelas
1. Tetap/Jelas
2. Tetap/Jelas
3. Tetap/Jelas
b) Tetap/Jelas
1. Tetap/Jelas
2. Tetap/Jelas
3. Tetap/Jelas
14.2. Tetap/Jelas
14.4. Tetap/Jelas 15. Mata Uang Penawaran dan Cara Pembayaran
15.1. Tetap/Jelas
15.2. Tetap/Jelas 16. Masa berlaku Penawaran dan Jangka Waktu Pelaksanaan
16.1. Tetap/Jelas
16.2. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
16.3. Tetap/Jelas
17. Surat Jaminan Penawaran
17.1. Tetap/Jelas
17.2. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
d) Tetap/Jelas
e) Tetap/Jelas
f) Tetap/Jelas
g) Tetap/Jelas 5 17.3. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
17.4. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
18. Usulan Penawaran Alternatif oleh Peserta Pengadaan
18.1. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
d) Tetap/Jelas
19. Bentuk Penawaran
19.1. Tetap/Jelas
20. Penanda tanganan Surat Penawaran
20.1. Tetap/Jelas
20.2. Tetap/Jelas
D. Pemasukan Penawaran
21. Penyampulan dan Penandaan Sampul Penawaran
21.1. Tetap/Jelas
21.2. Tetap/Jelas
a. Tetap/Jelas
b. Tetap/Jelas
21.3 Tetap/Jelas
22. Batas Akhir Waktu Pemasukan Penawaran
22.1. Tetap/Jelas
22.2. Tetap/Jelas 23. Penawaran Terlambat
23.1. Tetap/Jelas
23.2. Tetap/Jelas
24. Penarikan, Penggantian, Pengubahan, dan Penambahan Penawaran
yang telah Masuk
E.
24.1. Tetap/Jelas
24.2. Tetap/Jelas
24.3. Tetap/Jelas
Pembukaan dan Evaluasi Penawaran
25. Pembukaan Penawaran
25.1.
25.2.
25.3.
25.4.
25.5
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas 6 26. Kerahasiaan Proses
26.1. Tetap/Jelas
26.2 Tetap/Jelas 27. Klarifikasi Dokumen Penawaran
27.1. Tetap/Jelas 28. Koreksi Aritmatik
28.1. Tetap/Jelas
28.2. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
28.3. Tetap/Jelas
28.4. Tetap/Jelas 29. Evaluasi Penawaran
29.1.
29.2.
29.3.
29.4.
29.5
29.6
F.
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
d) Tetap/Jelas
Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
d) Tetap/Jelas
e) Tetap/Jelas
Tetap/Jelas
a. Tetap/Jelas
1. Tetap/Jelas
2. Tetap/Jelas
3. Tetap/Jelas
b. Tetap/Jelas
1. Tetap/Jelas
2. Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
29.7.
29.8
Penunjukan Pemenang Pengadaan
30. Penilaian dan Pembuktian Kualifikasi
30.1.
30.2.
30.3.
30.4.
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
Tetap/Jelas
31. Penetapan Pemenang
31.1. Tetap/Jelas
31.2. Tetap/Jelas
7 32. Pengumuman Pemenang dan Sanggahan
32.1. Tetap/Jelas
32.2. Tetap/Jelas, harus surat ASLI bukan Faximile
32.3. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
d) Tetap/Jelas
32.4. Tetap/Jelas
32.5. Tetap/Jelas
32.6. Tetap/Jelas
33. Penunjukan Penyedia Barang
33.1. Tetap/Jelas
a. Tetap/Jelas
b. Tetap/Jelas
33.2. Tetap/Jelas
33.3. Tetap/Jelas
34. Hak dan Kewajiban Pejabat Pembuat Komitmen untuk Menerima dan
Menolak Penawaran
34.1. Tetap/Jelas
34.2. Tetap/Jelas
35. Pelelangan Gagal dan Pelelangan Ulang
35.1. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
d) Tetap/Jelas
e) Tetap/Jelas
f) Tetap/Jelas
g) Tetap/Jelas
h) Tetap/Jelas
i) Tetap/Jelas
35.2. Tetap/Jelas
a. Tetap/Jelas
1. Tetap/Jelas
2. Tetap/Jelas
b. Tetap/Jelas
36. Surat Jaminan Pelaksanaan
36.1. Tetap/Jelas
36.2. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
c) Tetap/Jelas
d) Tetap/Jelas
e) Tetap/Jelas
f) Tetap/Jelas
g) Tetap/Jelas
8 36.3. Tetap/Jelas
36.4. Tetap/Jelas
37. Penandatangan Kontrak
37.1. Tetap/Jelas
a) Tetap/Jelas
b) Tetap/Jelas
37.2. Tetap/Jelas
37.3. Tetap/Jelas
37.4. Tetap/Jelas
BAB III
Lembar Data Pengadan
1.1 Lingkup Pengadaan
Tetap/Jelas
2.1 Sumber Dana
Tetap/Jelas
3.1 Peserta Pengadaan yang Layak
Tetap/Jelas
4.1 Persyaratan Kualifikasi Peserta Pengadaan
Tetap/Jelas
9.1 Penjelasan Dokumen Pemilihan
Tetap/Jelas
13.1 (i) Dokumen Penawaran
Tetap/Jelas
14.1 (a)(1) Harga Penawaran
Tetap/Jelas
14.1 (b)(1) Tetap/Jelas
14.1 (a)(3);(b)(2) Tetap/Jelas
15.1 Mata Uang Penawaran dan Cara Pembayaran
Tetap/Jelas
16.1 Masa Berlaku Penawaran dan Jangka Waktu Pelaksanaan
Tetap/Jelas
17.1 Surat Jaminan Penawaran
Tetap/Jelas
18.1 Usulan Penawaran Alternatif oleh Peserta Pengadaan
Tetap/Jelas
22.1 Batas Akhir
Tetap/Jelas 9 25.1 Pembukaan Penawaran
Tetap/Jelas BAB IV
Bentuk Dokumen Penawaran
Lampiran A
Lampiran B
Lampiran C
Lampiran D
Tetap/Jelas Tetap/Jelas Tetap/Jelas Tetap/Jelas BAB V
Syarat-Syarat Umum Kontrak
1. Ketentuan Umum
Tetap Jelas
2. Pelaksanaan Pengadaan, Serah Terima, Amandemen, dan Pemutusan
Kontrak
Tetap/Jelas
3. Kewajiban Penyedia Barang
Tetap/Jelas
4. Kewajiban Pejabat Pembuat Komitmen
Tetap/Jelas
5. Pembayaran Kepada Penyedia Barang
Tetap/Jelas
6. Penyelesaian Perselisihan
Tetap/Jelas
BAB VI
Syarat-Syarat Khusus Kontrak
Tetap/Jelas
BAB VII
Spesifikasi Teknis dan Gambar
Item No:
5 sampai dengan 14 adalah satu kesatuan alat. Eks Jerman. Keinginan user: Biodur®
13
20.
Spesifikasi Bennert manometer adalah vaccum meter with sliding
mirrox glass scale for easy parallax free reading.
Measuring range: 0 to approx 230 mbar
Graduation scale: 1 mbar
Connector: glass fitting
Weight approx: 450 gr (1 lb)
Flow meter diganti Current Meter Type AEM213-D.
Terdiri dari :
1 Unit
1. Main unit with 50-m cable
x1
2. display unit
x1
10 3. Vanet Set
4. Sensor protection cover
5. Hex wrench
6. AC power cable
7. RS232 communication cable
8. post processing software
9. manual and accessories
10. Installing and Training
x
x
x
x
x
x
1
1
1
1
1
1
1 paket
24.
Aerolab diganti alat terlampir (19 item, No. mulai 24.1 s.d 24.19)
35.
Ditambah “Pendingin”
42.
Diganti spesifikasi alat sbb:
Upgrade and 1 lot CONTROLLER: ‐ 24 Bit analog resolutions Retrofiting , Universal ‐ 24‐bit Precision Load Cell ‐ Up to 30kS/s sampling rate Input Card Testing machine, ‐ Transducer input accuracy up to Baldwin Brand, CAP. ‐ Termination Board with a ‐ 1/200,000 counts at full‐scale 68‐pin SCSI‐II ‐ 60K LBS. ‐ 3‐CH encoder inputs, supporting Connector and DIN‐Rail CW/CCW & AB phase Mounting 2‐CH 16‐bit analog outputs ‐ 68‐Pin SCSI‐VHDCI Cable, 3M ‐ 1 lot Personal Computer HP Compaq PC UPS with Noise filter capability Windows XP Original 1 lot Universal Testing Software Data Acquisition Adapter Software Includes, ransducer For Extension Gauge 15Cm Range, 0.005mm Resolutions Displacement measuring 1 lot Wiring accessories 2 week men‐work Installation, Programming 2 and Commissioning Mechanical work, for Overhaul retrofit and Reconditions of Machine Frame and Mounting 49.
60.
64.
65.
68.
79.
81.
82.
86.
Kelanjutan spesifikasi item alat no. 48
Tegangan listrik 220 V
Ditambah keterangan “alat molekuler”
Ditambah keterangan “alat molekuler”
Ditambah keterangan “alat molekuler”
Sandaran punggung diimbos logo IPB dengan diameter 8 cm
Sandaran punggung diimbos logo IPB dengan diameter 8 cm
Sandaran punggung diimbos logo IPB dengan diameter 8 cm
Rangka sepeda ditulis grafir “logo IPB” dan
“INSTITUT PERTANIAN BOGOR”
11 Dukungan Agen:
Surat Keterangan Dukungan Agen dan Surat Keterangan Keagenan dari Kementrerian Perdagangan untuk item nomor: 1, 3, 4, 21, 25, 26, 27, 35, 36, 37, 40, 41, 46, 50, 58, 64, 65, 66, 67, 70, 73, 75, 78. HARGA PERKIRAAN SENDIRI (HPS)
Harga Perkiraan Sendiri (HPS) untuk pekerjaan pengadaan Alat Laboratorium sebesar
Rp. 13.027.064.192,- (Tiga belas milyar dua puluh tujuh juta enam puluh empat ribu
seratus sembilan puluh dua rupiah)
12 Perubahan Alat Laboratorium
Item barang nomor 24 Unit Kerja Dep. SIL/Fateta
Item barang nomor 24 AEROLAB Complete EWT System, dihapus dan diganti menjadi item barang pada tabel di bawah :
No.
1
Spesifikasi
Nama Barang
Personal Flow Control Accuracy
Vacuum Pump Timing Accuracy
Atmospheric Pressure Accuracy
Typical Run Time
± 5% of set‐point after calibration
1 min/mo at 25 C
Kuan‐
titas
3
Satuan
unit
± 3% in Hg
Battery: 24 hrs at 9 L/min with Sioutas Impactor (approx. 13 in water back pressure)
24 hrs at 10 L/min with PEM and 37‐mm, 2.0 μm PTFE fi lter
24 hrs at 5 L/min with low‐volume PUF tube
24 hrs at 10 L/min with IMPACT Sampler in DPS System
Using charger with AC power: Extended run times
Charge Time
(varies with capacity and
level of charge)
Temperature Range
15 hrs with approved charger
Timer Display Range
Operating: 32 to 113 F (0 to 45 C)
Storage: ‐4 to 95 F (‐20 to 35 C)
Charging: 32 to 113 F (0 to 45 C)
1 to 99999 min (69 days); if run time exceeds 69 days, timer display rolls over
Time Display
Time of day in hours and minutes (12 or 24‐hr clock) with AM and PM indicators
Volume Display
Continually updated based on corrected fl ow rate multiplied by sampling time
Noise Level
62.5 dBA‡ ‐ pump without case
52 dBA‡ ‐ pump housed in noise‐reducing case (optional accessory)
After 15 sec, pump goes into Hold, retains accumulated run time and historical data,
and displays fault icon. Auto‐restart is attempted every 20 sec up to 10 times
(adjustable with DataTrac Software)
Flow Fault
High flows — 5 to 15 L/min
2
Impinger
Kapasitas Hisap Teknologi Pengisap Maximum 2,0 Liter udara/menit tanpa beban
Vibrasi katup ganda
Jumlah Pompa Hisap Pengatur Hisapan Lubang Hisap Lubang Tiup/Ukur Dimensi Mekanikal
Berat
Perlengkapan Utama 6 unit (independent)
Saklar putar bertahap (independent)
6 buah ukuran 1/4 inch
6 buah ukuran 1/4 inch
Panjang 51 cm, Lebar 21 cm Tinggi 22 cm, 5 kg
6 unit tabung reaksi (impinger); 6 unit tabung pengaman 1 lot selang fleksibel (1/4 inch), 1 buble flow meter
: 24 Jam (endurance test).
Kemampuan Operasi 3
4
High – Volumetric ( Hi‐ Indoor or outdoor sampling of airborne particulates
0‐70 cubic feet per minute (cfm) [0‐2 cubic meters per minute (cmm)] flow range
Vol ) air sampler
Spot or continuous monitoring
Portable and lightweight
Built‐in rotometer for instantaneous flow reading
Includes 4" (10.16 cm) diameter filter holder assembly
For use in normal, non‐explosive atmospheres
compliance
Made in U.S.A.
Sound Level FEATURES
Meter
Measurement range
Accuracy
Resolution
0.1dB
• LCD digital display
• Anolog bar indicator
• Wide dynamic range
• Auto/Manual range
• Fast/Slow response selectable
• MAX value hold function
• A/C weighting selection
• Date and time display
• AC/DC auxilitary output
• Back light
• Low power indication
30dB ~ 130dB
±2dB
0.1dB
3 1/2 digitals
1/6
2
unit
2
unit
5
unit
Sample rate
Frequency range
Over range indication
Auxilitary output
Battary voltage
5
2 times/s
30Hz ~ 8kHz
“UNDER” or “OVER”
AC 0.707Vrms at full range for each level, impedance 600Ω DC 10mV/dB, impedance 100Ω
6 x 1.5V (AAA)
Opacity Meter Range 0 – 100 % opacity
4
unit
1
unit
1
unit
1
unit
Smoke density indicator
Basis : Ringelmann principles
6
Anemometer ( Airflow, m/s
Handheld ) Airflow, km / h
Airflow, ft / s
Airflow, knots
Power supply
Dimensions
Receiving device:
Indicating device
Weight (including battery)
Service
7
Flow meter
208mm x 72mm
183mm x 74mm x 33 mm
350 g
Auto power‐off
Fixation of measuring result DATA HOLD Service
Compatible gases and liquid
Wetted Materials
Body : Polycarbonate
oring : neoprene & Buna‐N
Metal parts :Brass Standard, Stainless Steel optional
Float : Stainless steel, black glass, alumunium, K Monel on range
Temperature & pressure limits
with valve
Accuracy
Process Connection
Scale Length
Mounting orientation
Range No.
LPM Air
8
0,4 ‐ 30 (±2,0%)
1,4 ‐ 108 (±2,0%)
2 ‐ 98,5 (±2,0%)
0,8 ‐ 53 (±2,0%)
3 x 1,5W (AA)
Global Physical & Performance:
positioning System (GPS) Unit dimensions, WxHxD:
Display size, WxH:
Display resolution, WxH:
Display type:
Weight:
Battery:
Battery life:
Waterproof:
Floats:
High‐sensitivity receiver:
Interface:
Maps & Memory:
Basemap:
Ability to add maps:
Built‐in memory:
Accepts data cards:
Waypoints/favorites/locations:
Routes:
Track log:
Features:
100 psig (6,9 bar) @ 1200F (480C)
VFB = 3% of full scale
1/8 female NPT. VFB range 85 and 86 have 1/4" NPT back connection
VFB typical length
Mount in vertical position
65
0,2 ‐ 4
2.3" x 4.5" x 1.4" (5.8 x 11.4 x 3.5 cm)
1.53"W x 2.55"H (3.8 x 6.3 cm); 3" diag (7.6 cm)
240 x 400 pixels
transflective color TFT touchscreen
6.8 oz (192.7 g) with batteries
2 AA batteries (not included); NiMH or Lithium recommended
16 hours
yes (IPX7)
no
yes
USB and NMEA 0183 compatible
yes
yes
850 MB
microSD™ card (not included)
1000
50
10,000 points, 200 saved tracks
Automatic routing (turn by turn routing on roads):
yes (with optional mapping for detailed roads)
Electronic compass:
yes
Touchscreen:
yes
Barometric altimeter:
yes
Camera:
no
yes (paperless)
Geocaching‐friendly:
yes
Custom maps compatible:
Photo navigation (navigate to geotagged photos):
no
2/6
Outdoor GPS games:
Hunt/fish calendar:
Sun and moon information:
Tide tables:
Area calculation:
Custom POIs (ability to add additional points of interest):
Unit‐to‐unit transfer (shares data wirelessly with similar units):
Picture viewer:
yes (Wherigo only)
yes
yes
yes
yes
yes
yes
yes
Garmin Connect™ compatible (online community where you analyze, categorize and share data):
yes
9
Digital Analitycal Balance
Includes
Oregon 300
Carabiner clip
USB cable
Owner's manual on disk
Quick start guide
Capacity (metric):
Readability (metric):
Repeatibility (Std. Dev.) (mg)
Linearity (mg)
Weighing units:
260 g
0.1 mg
0,1
±0.2
Milligram, gram, kilogram, pound, ounce, user programmable custom unit, carat, troy ounce, pennyweight, grain, Newton, Hong Kong tael, Singapore tael, Taiwan tael, momme, tical, baht, mesghal, tola Basic Weighing, Dynamic Weighing, Parts Counting with Automatic Sample Recalibration, Percent Weighing, Check Weighing, Totalization, Display Hold Application Modes
Tare range
Stabilization time (seconds)
Operating Temperature Range
Power Requirements
Calibration
Display type
Display (in/cm)
Pan size (in/cm)
Dimensions WxHxD (in/cm)
Net Wt. (lb/kg)
Shipping dimensions
Shipping Wt. (lb/kg)
10
Spectrofotome APPLICATIONS
ter
FEATURES
Diffraction grating
Band pass
Wavelength range
Wavelength accuracy
Wavelength repeatability
Stray light
Photometric range (ABS)
1
unit
1
unit
To capacity by subtraction
3
50° to 86° F / 10° to 30° C
AC Adapter (included)
Digital with External Weight
2‐Line Alphanumeric Brilliant Backlit LCD Display With Text Prompts 4 x 1 / 10 x 2.5
3.5 / 9
8.7 x 12 x 11.8
22 x 30.5 x 30 (with draft shield) 8.7/ 4.0
15.5 x 20.5 x 19 / 39 x 52.5 x 50 (WxDxH) (in/cm)
15.3 / 7.0
Chemistry, research and QC laboratories.
Automatic blank for absorbance and transmission.
Absorbance measurement, transmission and concentration.
Concentration calculation by constant factor K or standard curve.
Multi‐standard calibration curve regression fit.
Capacity for up to 20 standards per calibration curve.
Storage capacity for up to 60 calibration curves.
Output RS‐232 with software to down load the results to a computer.
Output connection direct to the accessory printer 4120213.
LCD display of 2 lines 20 characters.
Path length up to 100 mm.
Includes a 4 position cuvette carrier for 10 mm cuvettes.
The carrier has a blank position that obstructs the light for zero blank in transmittance
without having to open the lid.
Lamp control that allows the lamp to be switch off if not in use.
deuterium lamp can be set to only function if the UV range is selected,
which means a longer lamp life.
includes 2 quartz cuvettes and 4 x 10 mm glass cuvettes.
Comes complete with a dust cover
1200 lines/mm
2 nm
200‐1000 nm
±1.0 nm
0.5 nm
< 0.1% T@340 nm
‐0,097
3/6
11
Photometric range (%T)
Photometric range (C)
Photometric accuracy
Photometric precision
Drift
Mains supply
Power
0,000
0
±0.3% T
0.2% T
±0.002 ABS/h
100...240 V 50/60 Hz
100 W
Ventilation and Control
natural convection
Oven
1
unit
2
unit
1
unit
continuous adjustment of pre‐heated fresh air admixture
vent connection with restrictor flap
microprocessor PID‐temperature controller with integrated autodiagnostic system with fault indicator
one Pt100 sensor class A in 4‐wire‐circuit
integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand‐by mode
digital LED‐ display of set and actual temperature as well as remaining process time
resolution of display for set value and actual value 0,5 °C
Overtemperature protection (double)
n case of total breakdown of sensor, the heating is switched off at approx. 3 °C above set value
in case of failure of the switching element, the heating will be controlled by an additional relay approx. 3 °C above the set temperature
in case of a faulty sensor (incorrect measuring values) or the total breakdown of the controller the heating is switched off at approx. 10 °C above the max. oven temperature by the mechanical temperature limiter TB protection class 1
Textured Stainless Steel Casing
Interior ‐ Heating Concept
Temperature Range
12
Turbidity ( Range
Turbidymeter)
Meter Resolution
Accuracy
fully insulated stainless steel door with double locking and 4‐point adjustment
inner glass door
w x h x d: 400 x 320 x 250 mm, 32 l
from +30 °C (however, at least 5 °C above ambient) up to +70 °C
0 to 1000 NTU
0.01, 0.1, 1 NTU
(dependent on measurement & range)
±2%/±3% of reading
Calibration
Push button at 0.02, 20.0, 100 & 800 NTU
Dimensions
Weight
68(W) x 155(L) x 46(H) (mm)
200g
Supplied with calibration kit.
Hand held waterproof turbidity meter.
Auto‐ranging up to 1000 NTU.
Multi‐point automatic calibration (up to 4 points).
Self‐diagnostic messages, quick stable responses and maintenance‐free.
Infra‐Red light source.
Supplied with calibration kit and carrying case.
13
pH Meter
pH Meter Digital
Range pH
Range mV
Digital pH Meter that is handheld.
‐2.00 to 16.00 pH
± 699.9 mV; ±1999 mV
Range Temperature
Redution pH
Redution mV
‐ 20.00 to 120.00C/‐4.0 to 248.00f
0.01
0.1 mV; 1 mV
Redution Temperature
Accuracy (@20°C) pH
0.10C/0.10f
±0.01
mV ±0.2 mV; ±1 mV
4/6
Temperature ±0.4°C / ±0.8°F
automatic, 1 or 2 point with 3 memorized buffer
values (pH 4.01, 7.01, 10.01)
pH Calibration
Offset Calibration ±1 pH
Slope Calibration 75 to 110%
Input Impedance
Temperature Compensation
14
Incubator
Ventilation and Control
1012Ohm
automatic, ‐20 to 120°C (‐4 to 248°F) or manual without temperature probe
natural convection
continuous adjustment of pre‐heated fresh air admixture
vent connection with restrictor flap
microprocessor PID‐temperature controller with integrated autodiagnostic system with fault indicator
one Pt100 sensor class A in 4‐wire‐circuit
integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand‐by mode
1
unit
1
unit
1
unit
digital LED‐ display of set and actual temperature as well as remaining process time
resolution of display for set value and actual value 0,5 °C
Overtemperature protection (double)
n case of total breakdown of sensor, the heating is switched off at approx. 3 °C above set value
in case of failure of the switching element, the heating will be controlled by an additional relay approx. 3 °C above the set temperature
in case of a faulty sensor (incorrect measuring values) or the total breakdown of the controller the heating is switched off at approx. 10 °C above the max. oven temperature by the mechanical temperature limiter TB protection class 1
Textured Stainless Steel Casing
Interior ‐ Heating Concept
Temperature Range
15
Water Bath
Standard equipment
Capacity
Temperature Range
Voltage / Power Rating
16
17
Vacum Pump
Type:
Power:
Motor
Voltage
Vacuum Rate:
Air input per min./litres
Fitting
Connections
Net Weight
Electric Cable
Bomb Calorimeter Calorimeter Type
fully insulated stainless steel door with double locking and 4‐point adjustment
inner glass door
w x h x d: 400 x 320 x 250 mm, 32 l
from +30 °C (however, at least 5 °C above ambient) up to +70 °C
microprocessor PID‐temperature controller with integrated autodiagnostic system with fault indicator
one Pt100 sensor class A in 4‐wire‐circuit
integrated digital timer from 1 min. to 99,59
hours for:
ON continuous operation
WAIT (delayed on for continuous and limited
timed operation)
HOLD
digital display (LED) of set and actual temperature (0,1 °C resolution) and of
(remaining) programme time
7 litters
from +10 °C (however, at least 5 °C above ambient) up to +95 °C with additional boiling
mode (+100 °C)
∙ 230 V (+/‐ 10%), 50/60 Hz
∙ ca. 1.200 W (during heating)
‐ Vacuum Pump
1/4 HP
: 220‐240V / 50HZ
‐ 110‐120V, 220V / 60HZ
650mmHG
: 65L/min
: manometer; Air let‐in valve; handy carrying handle
: with connection 1/4'' BSP
: 5.0KG
: 1.9 M
1
Static
unit
Operator Time per Test
25 Minutes
Precision Classification
0,30%
Number of Vessels
Tests per Hour
Bomb Type & Bucket
Bucket Filling
Oxygen Filling
1
1
Removable Bomb & Bucket Design
Manual
Manual
5/6
18
19
Data Logger ( data acquisition system)
Bomb Washing
Temperature Resolution
Page Number
Manual
0.002 °C
14
resolution of 0.001 °C.
analog input
logic input
internal memmory
Hdd
16 channels 8 slot
16 channels
512 kword/channel
40 gb
synchrinoze function
pc interface
max 8 unit or 64 channel
PMCIA slot (type II), LAN (ethernet), USB
operating enviromental
Rated Power supply
Power consumption
0 to 40 0C, 30 to 80% R.H, 5 to 35 0C when using the printer and HDD
AC Adapter ( 100 V to 240 AC ) x 2
approx 135 Va max
Soil Moisture Equipment *Range :
* Heavy duty probe, probe length :
Soil moisture content measurement.
0 to 100 % moisture content.
20 cm.
*Meter build test probe, all in 1,
easy operation.
* Hold, Record ( max., min. ).
* IP‐65 Water resistance, heavy duty.
* DC 1.5V battery ( UM‐4, AAA ) x 4.
LUTRON
6/6
2
unit
1
unit