[OPTIMIZED TECHNICAL HOTEL SYSTEMS]
goingsoft Inroom WLAN AP
802.11b/g Wall Jack Access Point with Hidden Antenna, Multi-ESSID and PoE
Product Description
Technical details:
The inroom WLAN AP Wall Jack Access Point is an inthe-wall Wi-Fi IEEE802.11 b/g AP, designed to blend
into any office or home interior architecture or
furnishings effortlessly for its simplistic yet chic design.
The compact WLAN AP in a small form factor lays
snug in a standard wall outlet box, and hides the wall
cutout with its faceplate, for the faceplate is slide-able
for adjusting the depth of the portion that goes in-thewall, and for covering the mistakes around the cut-out
hole successfully. Its front panel features LED status
indicators and a RJ45 wall jack. It has the interfaces to
serve both wireless and wired LAN access. By
utilizing PoE, comes with an advantage of running
fewer cables in the duct. The Power over Ethernet
(PoE) LAN port on the AP serves as the power feed as
well as the wired network feed. Optionally, it can also
be powered via an AC adapter when PoE switch is not
available. AP is an easy-to-install and cost-effective
solution for most of indoor wireless deployments,
including hotel rooms, apartments, offices,
classrooms, libraries, private homes, public kiosks, etc
•
High-speed 802.11b/g Atheros Super G
mode, data rates up to 108Mbps.
•
Provide business-class security:
64/128/152 bits WEP, WPA/WPA2 with
IEEE 802.1X or PSK.
•
Supports QoS, WMM, multiple 8 ESSIDs,
VLAN tagging, and WDS bridging.
•
Hidden in-the-wall behind faceplate; able
to serve both wired and wireless LAN
clients.
•
Manageable by 4ipnet WHG Controllers
as part of integrated solution for
intelligent building or Wi-Fi hotspot
•
Product Dimensions: 4.8 x 7.8 x 7.8 cm
358 g
•
Boxed-product Weight: 721 g