Material Safety Data Sheet
Page 1 of 2
Sodium Hypochlorite Solution, 5%
MSDS # 675.00
Section 1:
Product and Company Identification
Sodium Hypochlorite Solution, 5%
Synonyms/General Names: Bleach
Product Use: For educational use only
Manufacturer: Columbus Chemical Industries, Inc., Columbus, WI 53925.
24 Hour Emergency Information Telephone Numbers
CHEMTREC (USA): 800-424-9300
CANUTEC (Canada): 613-424-6666
ScholAR Chemistry; 5100 W. Henrietta Rd, Rochester, NY 14586; (866) 260-0501; www.Scholarchemistry.com
Section 2:
Hazards Identification
Clear, colorless liquid, strong bleach odor.
WARNING! Corrosive to body tissue and moderately toxic by ingestion and inhalation.
Target organs: Respiratory system, eyes, skin.
HMIS (0 to 4)
Health
2
Fire Hazard
0
Reactivity 1
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Section 3:
Composition / Information on Ingredients
Sodium Hypochlorite (7681-52-9), 5%.
Water (7732-18-5), 95%.
Section 4:
Eyes:
Skin:
Ingestion:
Inhalation:
Sodium Carbonate (497-19-8), 0.1%.
First Aid Measures
Always seek professional medical attention after first aid measures are provided.
Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally.
Immediately flush skin with excess water for 15 minutes while removing contaminated clothing.
Call Poison Control immediately. Do not induce vomiting. Rinse mouth with cold water. Give victim 1-2 cups of
water or milk to drink.
Remove to fresh air. If not breathing, give artificial respiration.
Section 5:
Fire Fighting Measures
Nonflammable solution. When heated to decomposition, emits acrid fumes.
Protective equipment and precautions for firefighters: Use foam or dry chemical to extinguish fire.
Firefighters should wear full fire fighting turn-out gear and respiratory protection (SCBA). Cool
container with water spray. Material is not sensitive to mechanical impact or static discharge.
Section 6:
0
1
0
Accidental Release Measures
Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to unnecessary and unprotected
personnel. Remove all ignition sources and ventilate area. Contain spill with sand or absorbent material and place material in a
sealed bag or container for disposal. Wash spill area after pickup is complete. See Section 13 for disposal information.
Section 7:
Handling and Storage
White
Handling: Use with adequate ventilation and do not breathe dust or vapor. Avoid contact with skin, eyes, or clothing. Wash
hands thoroughly after handling.
Storage: Store in Corrosive Area [White Storage] with other corrosive items. Store in a dedicated corrosive cabinet. Store in a
cool, dry, well-ventilated, locked store room away from incompatible materials.
Section 8:
Exposure Controls / Personal Protection
Use ventilation to keep airborne concentrations below exposure limits. Have approved eyewash facility, safety shower, and fire
extinguishers readily available. Wear chemical splash goggles and chemical resistant clothing such as gloves and aprons. Wash
hands thoroughly after handling material and before eating or drinking. Use NIOSH-approved respirator with an acid/organic
cartridge. Exposure guidelines Sodium Hypochlorite: OSHA PEL: N/A, ACGIH TLV: N/A, STEL: N/A.
© 2008, Scholar Chemistry. All Rights Reserved.
9/22/2012
Material Safety Data Sheet
Page 2 of 2
MSDS # 675.00
Sodium Hypochlorite Solution, 5%
Section 9:
Molecular formula
Molecular weight
Specific Gravity
Vapor Density (air=1)
Melting Point
Boiling Point/Range
Vapor Pressure (20°C)
Flash Point:
Autoignition Temp.:
Scholar Chemistry
Physical and Chemical Properties
NaOCl.
74.45.
1.08 g/mL @ 20°C.
2.58.
0°C.
100°C.
14 mm Hg.
N/A.
N/A.
Section 10:
Appearance
Odor
Odor Threshold
Solubility
Evaporation rate
Partition Coefficient
pH
LEL
UEL
Clear, colorless liquid.
Odor of hypochlorites.
N/A.
Completely soluble in water.
N/A. (Butyl acetate = 1).
N/A. (log POW).
N/A.
N/A.
N/A.
Stability and Reactivity
Stability: Stable under normal conditions of use and storage.
Incompatibility: Acids, oxidizable materials, ammonia.
Shelf life: Fair shelf life, store in a cool, dry environment.
Section 11:
Toxicology Information
Acute Symptoms/Signs of exposure: Eyes: Redness, tearing, itching, burning, damage to cornea, conjunctivitis, loss of vision.
Skin: Redness, blistering, burning, itching, tissue destruction with slow healing. Ingestion: Nausea, vomiting, burning, diarrhea,
ulceration, convulsions, shock. Inhalation: Coughing, wheezing, shortness of breath, headache, spasm, inflammation and edema
of bronchi, pneumonitis.
Chronic Effects: Repeated/prolonged skin contact may cause thickening, blackening or cracking. Repeated eye exposure may
cause corneal erosion or loss of vision.
Sensitization: none expected
Sodium Hypochlorite: LD50 [oral, rat]; N/A; LC50 [rat]; N/A; LD50 Dermal [rabbit]; N/A
Material has not been found to be a carcinogen nor produce genetic, reproductive, or developmental effects.
Section 12:
Ecological Information
Ecotoxicity (aquatic and terrestrial):
Section 13:
Ecological impact has not been determined.
Disposal Considerations
Check with all applicable local, regional, and national laws and regulations. Local regulations may be more stringent than
regional or national regulations. Small amounts of this material may be suitable for sanitary sewer disposal after being
neutralized to pH 7.
Section 14:
DOT Shipping Name:
DOT Hazard Class:
Identification Number:
Transport Information
Hypochlorite Solutions .
8, pg III .
UN1791.
Section 15:
Canada TDG:
Hazard Class:
UN Number:
Hypochlorite Solutions.
8, pg III .
UN1791 .
Regulatory Information
EINECS: Not listed.
WHMIS Canada: CLASS E: Corrosive liquid.
TSCA: All components are listed or are exempt.
California Proposition 65: Not listed.
The product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS
contains all the information required by the Controlled Products Regulations.
Section 16:
Other Information
Current Issue Date: September 22, 2012
Disclaimer: Scholar Chemistry and Columbus Chemical Industries, Inc., (“S&C”) believes that the information herein is factual but is not intended to be all
inclusive. The information relates only to the specific material designated and does not relate to its use in combination with other materials or its use as to any
particular process. Because safety standards and regulations are subject to change and because S&C has no continuing control over the material, those
handling, storing or using the material should satisfy themselves that they have current information regarding the particular way the material is handled, stored
or used and that the same is done in accordance with federal, state and local law. S&C makes no warranty, expressed or implied, including (without
limitation) warranties with respect to the completeness or continuing accuracy of the information contained herein or with respect to fitness for any
particular use.
© 2008, Scholar Chemistry. All Rights Reserved.
9/22/2012