D
DRILL/TAP CENTER
Haas Automation Europe
HIGH-PERFORMANCE DRILL/TAP
The DT-1
is a compact, high-speed drill/tap center with full milling capabilities. The machine
features a generous 508 x 406 x 394 mm work cube and 660 x 381 mm T-slot table, while maintaining
a very small footprint. A powerful BT30 taper spindle spins to 15 000 rpm, and allows rigid tapping to
5 000 rpm.The spindle is coupled directly to the motor for smooth, quiet operation and extreme thermal stability.
A 11,2 kW vector drive system provides 62 Nm (peak) of cutting torque for milling and boring operations.
The DT-1 is equipped with a high-speed, 20-pocket, servo-driven tool changer that swaps tools in
0,8 seconds. High-speed 61,0 m/min rapids and 1G acceleration rates shorten cycle times and reduce
non-cutting time. The maximum cutting feedrate is 30,5 m/min.
For efficient chip removal, the DT-1 features steeply sloped internal sheet metal. Optional dual chip augers
transport chips to the rear of the machine for discharge. A 170-liter flood coolant system is standard, with
options for a programmable coolant nozzle and high-pressure through-spindle coolant systems.
Built in the USA by Haas, the DT-1 drill/tap center is backed by the worldwide network of Haas Factory
Outlets – the most extensive system of support and service in the industry.
FEATURED HIGHLIGHTS
ISO standard G-code programming
through the easy-to-use Haas
control, or use the optional Intuitive
Programming System
A high-volume coolant system and
optional dual augers clear chips from
the enclosure quickly
Heavy cast-iron base FEA
optimized for rigidity
61,0 m/min rapids and 1G axis
accelerations reduce cycle times
Inline direct-drive spindle
provides 15 000 rpm, and will
rigid tap to 5 000 rpm
Side-mount tool changer
(20+1 tools) swaps tools
in just 0,8 seconds
Warranty: 1 Year Parts and Labor
SPECIFICATIONS
Travels
The DT-1’s high-speed 20+1 tool side-mount tool changer swaps tools
in 0,8 seconds. The 15 000 rpm inline direct-drive spindle allows rigid
tapping to 5 000 rpm, with up to 4-times retract speed.
DT-1
X
508 mm
Y
406 mm
Z
394 mm
Table
Length
660 mm
Width
Max Weight on Table
381 mm
1
68 kg
Spindle
Speed
Drive System
15 000 rpm
Inline Direct Drive
Max Torque
62 Nm @ 1 700 rpm
Max Rating
11,2 kW
Tapping
Standard Features
• 11,2 kW Vector Drive
• 15 000 rpm BT30 Taper Spindle
• Inline Direct Drive
• 20+1 Side-Mount Tool Changer
• 38 cm Color LCD Monitor w/USB Port
• High-Speed Rigid Tapping
• Early Power Failure Detection Module
• Made in the USA
Max Tapping Speed
5 000 rpm
Max Tap Size (aluminum)
M12–1,75
Feedrates
Max Rapids
61,0 m/min
Max Cutting
30,5 m/min
Axis Acceleration1
1G (9,8 m/sec2)
Tool Changer
Capacity
20+1
Tool Type/Taper
BT 30
Max Tool Diameter
51 mm
Tool to Tool
0,8 sec
Chip to Chip
1,5 sec
Accuracy
Options (partial list)
• Through-Spindle Coolant System
• Programmable Coolant Nozzle
• Dual Chip Augers
• High-Speed Machining w/Look-Ahead
Positioning
±0,005 mm
Repeatability
±0,003 mm
General
Power Required (min)
Coolant Capacity
380 VAC 3-Phase
170 L
• Haas Intuitive Programming System
• Wireless Intuitive Probing System
• 4th- and 5th-Axis Drives
1At
1G acceleration (max 68 kg); up to 227 kg with reduced accelerations.
May require machine anchoring.
Haas DT-1
High-Performance Drill/Tap Center
Steeply sloped internal sheet metal and available dual chip augers
efficiently move chips to the rear of the DT-1 for discharge.
Machine Dimensions
Door Open
A
D
C
Haas Automation Europe
Mercuriusstraat 28, B-1930 Zaventem / Belgium
Tel: +32 2 522 99 05 Fax: +32 2 523 08 55
B
www.HaasCNC.com
Front
Haas Automation, Inc.
Toll Free: 800-331-6746
Operating Dimensions
Fax: 805-278-8540
Haas Automation, Asia
Tel: +86 21 3861 6666 Fax: +86 21 3861 6799
Haas Automation, India Pvt Ltd
TEL: +91-22-66098830, 31, 32, 33, 34
E
R
T
I
F
I
E
D
DT-1
A.
Max Operating Height
2 616 mm
B.
Max Operating Width
1 727 mm
C.
Max Operating Depth*
2 515 mm
D.
Max Operating Depth w/coolant tank
3 099 mm
* With control swung forward. Additional 914 mm required to open rear service panel.
Specifications subject to change without notice. Not responsible for typographical errors.
Machines shown with optional equipment.
EN.04/2010
C
Top