发表论文(2000 年--2007 年)
2007 年度
2007 年度，实验室师生在国内外刊物上共发表论文 212 篇，其中 SCI 收录
135 篇，EI 收录 162 篇，SCI/EI 同时收录 85 篇。
在这些论文中，影响因子超过 2 的论文有 11 篇。
1)
Yin, LW; Li, MS; Bando, Y; Golberg, D; Yuan, XL; Sekiguchi, T, Tailoring the optical properties
of epitaxially grown biaxial ZnO/Ge, and coaxial ZnO/GeZnO and Ge/ZnOGe heterostructures,
ADVANCED FUNCTIONAL MATERIALS, 2007, 17, 2, 270-276, 7.496, SCI/EI,
2)
Gu, TK; Qin, JY; Bian, XF, Correlation between local structure of melts and glass forming ability
for Al-based alloys: A first-principles study, APPLIED PHYSICS LETTERS, 2007, 91, 8, -,
3.596, SCI/EI,
3)
Qin, JY; Gu, TK; Yang, L; Bian, XF, Study on the structural relationship between the liquid and
amorphous Fe78Si9B13 alloys by ab initio molecular dynamics simulation, APPLIED PHYSICS
LETTERS, 2007, 90, 20, -, 3.596, SCI/EI,
4)
Zhang, YN; Wang, L; Morioka, S; Wang, WM, Modified Lennard-Jones potentials for Cu and Ag
based on the dense gaslike model of viscosity for liquid metals, PHYSICAL REVIEW B, 2007,
75, 1, -, 3.172, SCI,
5)
Yin, Q; Li, AJ; Wang, WQ; Xia, LG; Wang, YM, Study on the electrical and mechanical
properties of phenol formaldehyde resin/graphite composite for bipolar plate, JOURNAL OF
POWER SOURCES, 2007, 165, 2, 717-721, 2.809, SCI/EI,
6)
Ding, HM; Liu, XF; Yu, L; Zhao, GQ, The influence of forming processes on the distribution and
morphologies of TiC in Al-Ti-C master alloys, SCRIPTA MATERIALIA, 2007, 57, 7, 575-578,
2.481, SCI/EI,
7)
Jing, G; Bian, XF; Tao, L; Yan, Z; Li, TB; Bo, Z; Sun, B, Formation and interesting thermal
expansion behavior of novel Sm-based bulk metallic glasses, INTERMETALLICS, 2007, 15, 7,
929-933, 2.219, SCI,
8)
Li, XL; Bian, XF; Hu, LN; Wu, YQ; Guo, J; Zhang, JY, Glass transition temperature of bulk
metallic glasses: A linear connection with the mixing enthalpy, JOURNAL OF APPLIED
PHYSICS, 2007, 101, 10, -, 2.171, SCI/EI,
9)
Sun, C; Geng, H; Ji, L; Wang, Y; Wang, G, Rheological properties of Pb, Sb, Bi, and Sn melts,
JOURNAL OF APPLIED PHYSICS, 2007, 102, 3, -, 2.171, SCI/EI,
10) Wang, DG; Chen, CZ; Liu, XN; Lei, TQ, Effects of sol-gel processing parameters on the phases
and microstructures of HA films, COLLOIDS AND SURFACES B-BIOINTERFACES, 2007, 57,
2, 237-242, 2.109, SCI/EI,
11) Jing, M; Wang, CG; Wang, Q; Bai, YJ; Zhu, B, Chemical structure evolution and mechanism
during pre-carbonization of PAN-based stabilized fiber in the temperature range of 350-600
degrees C, POLYMER DEGRADATION AND STABILITY, 2007, 92, 9, 1737-1742, 2.073,
SCI/EI,
SCI 收录文章目录
12) Lv, W; Wu, LL; Wu, YS; Xv, RC; Gai, HD; Zou, K, Synthesis and characterization of
one-dimensional GaN nanostructures, JOURNAL OF CRYSTAL GROWTH, 2007, 307, 1, 1-5,
1.95, SCI/EI,
13) Guo, J; Bian, XF; Zhao, Y; Zhang, SJ; Li, TB; Wang, CD, Correlation between the fragility of
supercooled liquids and thermal expansion in the glassy state for Gd-based glass-forming alloys,
JOURNAL OF PHYSICS-CONDENSED MATTER, 2007, 19, 11, -, 1.886, SCI/EI,
14) Zhang, YN; Wang, L; Wang, WM, Thermodynamic, dynamic and structural relaxation in
supercooled liquid and glassy Ni below the critical temperature, JOURNAL OF
PHYSICS-CONDENSED MATTER, 2007, 19, 19, -, 1.886, SCI/EI,
15) Ma, HJ; Li, YJ; Gerasimov, SA; Wang, J, Microstructure and phase constituents near the fusion
zone of Fe3Al/Cr-Ni alloys joints produced by MAW, MATERIALS CHEMISTRY AND
PHYSICS, 2007, 103, 1, 195-199, 1.871, SCI,
16) Zhang, L; Zhang, YJ; Zhen, YD; Jiang, SP, Lanthanum strontium manganite powders synthesized
by gel-casting for solid oxide fuel cell cathode materials, JOURNAL OF THE AMERICAN
CERAMIC SOCIETY, 2007, 90, 5, 1406-1411, 1.792, SCI,
17) Bian, XF; Qin, JY; Qin, XB; Wu, YQ; Wang, CD; Thompson, M, Structural features of liquid
metallic glass former, PHYSICS LETTERS A, 2006, 359, 6, 718-722, 1.711, SCI,
18) Fan, RH; Qi, L; Sun, KN; Min, GH; Gong, HY, The bonding character and magnetic properties of
Fe3Al: Comparison between disordered and ordered alloy, PHYSICS LETTERS A, 2006, 360, 2,
371-375, 1.711, SCI,
19) Mao, T; Bian, XF; Morioka, S; Wu, YQ; Li, XL; Lv, XQ, Effects of magnetic field on the
viscosity of molten Cu-Sn alloys, PHYSICS LETTERS A, 2007, 366, 1-2, 155-159, 1.711, SCI,
20) Wu, YQ; Bian, XF; Mao, T; Li, XL; Li, TB; Wang, CD, Effect of the roughness of crucible on
viscosity of liquid Pb38.1Sn61.9 alloy, PHYSICS LETTERS A, 2007, 361, 3, 265-269, 1.711,
SCI,
21) Zhao, Y; Bian, XF; Qin, X; Qin, JY; Hou, XX, Liquid structure: Is it directly correlative to
glass-forming ability?, PHYSICS LETTERS A, 2007, 367, 4-5, 364-368, 1.711, SCI,
22) #Wang, XH; Song, SL; Qu, SY; Zou, ZD#, Characterization of in situ synthesized TiC particle
reinforced Fe-based composite coatings produced by multi-pass overlapping GTAW melting
process, SURFACE & COATINGS TECHNOLOGY, 2007, 201, 12, 5899-5905, 1.678, SCI,
23) Li, AM; Sun, KN; Dong, WF; Zhao, DM, Mechanical properties, microstructure and
histocompatibility of MWCNTs/HAp biocomposites, MATERIALS LETTERS, 2007, 61, 8-9,
1839-1844, 1.625, SCI/EI,
24) Liu, P; Li, YJ; Geng, HR; Wang, J, Microstructure characteristics in TIG welded joint of Mg/Al
dissimilar materials, MATERIALS LETTERS, 2007, 61, 6, 1288-1291, 1.625, SCI/EI,
25) Qi, YX; Li, MS; Bai, YJ, Carbon nanobelts synthesized via chemical metathesis route,
MATERIALS LETTERS, 2007, 61, 4-5, 1122-1124, 1.625, SCI/EI,
26) Tian, YS; Chen, CZ, Microstructures and wear properties of in situ formed composite coatings
produced by laser alloying technique, MATERIALS LETTERS, 2007, 61, 3, 635-638, 1.625, SCI,
27) Wei, MZ; Lun, N; Ma, XC; Wen, SL, A simple solvothermal reduction route to copper and
cuprous oxide, MATERIALS LETTERS, 2007, 61, 11-1, 2147-2150, 1.625, SCI/EI,
28) Wu, YQ; Bian, XF; Meng, QG; Zhao, Y; Mao, T; Zhang, YN, A critical transition state in liquid
metals, MATERIALS LETTERS, 2007, 61, 11-1, 2434-2438, 1.625, SCI/EI,
29) Yu, MJ; Bai, YJ; Wang, CG; Xu, Y; Guo, PZ, A new method for the evaluation of stabilization
index of polyacrylonitrile fibers, MATERIALS LETTERS, 2007, 61, 11-1, 2292-2294, 1.625,
SCI/EI,
30) Jia, YX; Zhan, GF; Wu, LL; Sun, S; Zhao, GQ; An, LJ, Analysis of chemical calorific effect
during reactive extrusion processes for free radical polymerization, POLYMER
INTERNATIONAL, 2007, 56, 12, 1553-1557, 1.557, SCI/EI,
31) Sun, C; Sun, KN, Preparation and microwave absorption properties of Ce-substituted lithium
ferrite, SOLID STATE COMMUNICATIONS, 2007, 141, 5, 258-261, 1.535, SCI/EI,
32) Li, HP; Zhao, GQ; Niu, ST; Huang, CZ, FEM simulation of quenching process and experimental
verification of simulation results, MATERIALS SCIENCE AND ENGINEERING
A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE, 2007, 452, , 705-714,
1.457, SCI,
33) Pang, LX; Sun, KN; Ren, S; Sun, C; Fan, RH; Lu, ZH, Fabrication and microstructure of Fe3Al
matrix composite reinforced by carbon nanotube, MATERIALS SCIENCE AND
ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE, 2007,
447, 1-2, 146-149, 1.457, SCI/EI,
34) Wang, AJ; Lu, YP; Sun, RX, Recent progress on the fabrication of hollow microspheres,
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS
PROPERTIES MICROSTRUCTURE, 2007, 460, , 1-6, 1.457, SCI/EI,
35) Wu, LL; Jia, YX; Sun, S; Zhang, GF; Zhao, GQ; An, LJ, Study on reactive extrusion processes of
block copolymer, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL
MATERIALS PROPERTIES MICROSTRUCTURE, 2007, 454, , 221-226, 1.457, SCI/EI,
36) Wu, YY; Liu, XF; Song, JG; Bian, XF, A novel method to induce the precipitation of primary
silicon in commercial near eutectic Al-Si alloys, MATERIALS SCIENCE AND ENGINEERING
A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE, 2007, 457, 1-2, 109-113,
1.457, SCI/EI,
37) Guo, J; Bian, XF; Meng, QG; Zhao, Y; Li, XL; Zhang, SJ, Ternary Sm-Al-Co bulk metallic glass
with high glass-forming ability, JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 431, 1-2,
167-170, 1.455, SCI/EI,
38) Li, XL; Bian, XF; Hu, LN; Wu, YQ; Zhang, JY, Effect of microalloying on glass formation and
thermal stability of Cu-Pr-based amorphous alloys, JOURNAL OF ALLOYS AND
COMPOUNDS, 2007, 439, 1-2, 87-90, 1.455, SCI/EI,
39) Niu, YC; Bian, XF; Wang, WM; Jin, SF; Li, GH; Chu, FM; Zhang, WG, The peculiarity of
contraction in the primary crystallization of amorphous Fe73.5Nb3Cu1Si13.5B9 alloy,
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 433, 1-2, 296-301, 1.455, SCI/EI,
40) Song, KK; Bian, XF; Guo, J; Wang, SH; Sun, BA; Li, XH; Wang, CD, Effects of Ce and Mm
additions on the glass forming ability of Al-Ni-Si metallic glass alloys, JOURNAL OF ALLOYS
AND COMPOUNDS, 2007, 440, 1-2, L8-L12, 1.455, SCI,
41) Wang, SH; Bian, XF, Crystallization of Al-Mg-Ce and Al-Mg-Ni-Ce amorphous alloys,
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 441, 1-2, 135-138, 1.455, SCI/EI,
42) Wu, YY; Liu, XF; Bian, XF, The study of refinement for primary silicon in Cu-50 wt.%Si alloys,
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 433, 1-2, 175-179, 1.455, SCI/EI,
43) Wu, YY; Liu, XF; Jiang, BG; Bian, XF, Four-branched compounds coupled Si and iron-rich
intermetallics in near eutectic Al-Si alloys, JOURNAL OF ALLOYS AND COMPOUNDS, 2007,
437, 1-2, 80-83, 1.455, SCI/EI,
44) Yu, LN; Liu, XF, The relationship between viscosity and refinement efficiency of pure aluminum
by Al-Ti-B refiner, JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 425, 1-2, 245-250,
1.455, SCI,
45) Yu, LN; Liu, XF; Ding, HM; Bian, XF, A new nucleation mechanism of primary Si by
peritectic-like coupling of AlP and TiB2 in near eutectic Al-Si alloy, JOURNAL OF ALLOYS
AND COMPOUNDS, 2007, 432, 1-2, 156-162, 1.455, SCI/EI,
46) Yu, LN; Liu, XF; Ding, HM; Bian, XF, A new nucleation mechanism of primary Si by
like-peritectic coupling of AlP and Al4C3 in near eutectic Al-Si alloy, JOURNAL OF ALLOYS
AND COMPOUNDS, 2007, 429, 1-2, 119-125, 1.455, SCI/EI,
47) Zhang, CZ; Bian, XF; Guo, J; Wang, SH; Song, KK; Wang, CD; Zhang, B, Effect of Pr addition
on glass-forming ability of Al-Ni-Zr metallic glass alloy, JOURNAL OF ALLOYS AND
COMPOUNDS, 2007, 436, 1-2, 95-98, 1.455, SCI/EI,
48) Tian, YS; Chen, CZ; Chen, LB; Chen, LX, Study on the microstructure and wear resistance of the
composite coatings fabricated on Ti-6Al-4V under different processing conditions, APPLIED
SURFACE SCIENCE, 2006, 253, 3, 1494-1499, 1.406, SCI,
49) Wang, DG; Chen, CZ; Ma, J; Lei, TQ, Microstructure of yttric calcium phosphate bioceramic
coatings synthesized by laser cladding, APPLIED SURFACE SCIENCE, 2007, 253, 8,
4016-4020, 1.406, SCI/EI,
50) Zhu, QJ; Qu, SY; Wang, XH; Zou, ZD, Synthesis of Fe-based amorphous composite coatings
with low purity materials by laser cladding, APPLIED SURFACE SCIENCE, 2007, 253, 17,
7060-7064, 1.406, SCI/EI,
51) Zhu, XD; Li, SL; Yang, XJ; Qiu, J, Microstructures and electrical properties of La0.8Sr0.2MnO3
films synthesized by sol-gel method, APPLIED SURFACE SCIENCE, 2007, 254, 2, 532-537,
1.406, SCI/EI,
52) Li, J; Yin, YS; Shi, RX; Ma, LP, Influence of cobalt phase on mechanical properties and thermal
shock performance of Al2O3-TiC composites (vol 31, pg 945, 2005), CERAMICS
INTERNATIONAL, 2007, 33, 3, 509-509, 1.36, SCI,
53) Zhao, Y; Bian, XF; Qin, XB; Qin, JY; Hou, XX, Structural properties and evolution in the
solidification process of Cu-Ag alloys, JOURNAL OF NON-CRYSTALLINE SOLIDS, 2007,
353, 11-1, 1177-1187, 1.319, SCI/EI,
54) Wu, CS; Gao, JQ; Hu, JK, Real-time sensing and monitoring in robotic gas metal arc welding,
MEASUREMENT SCIENCE & TECHNOLOGY, 2007, 18, 1, 303-310, 1.297, SCI/EI,
55) Jia, YX; Zhang, GF; Wu, LL; Sun, S; Zhao, GQ; An, LJ, Computer simulation of reactive
extrusion processes for free radical polymerization, POLYMER ENGINEERING AND
SCIENCE, 2007, 47, 5, 667-674, 1.272, SCI/EI,
56) Zhang, HM; Zhao, GQ; Ma, XW, Adaptive generation of hexahedral element mesh using an
improved grid-based method, COMPUTER-AIDED DESIGN, 2007, 39, 10, 914-928, 1.222,
SCI/EI,
57) Li, HP; Zhao, GQ; Huang, CZ; Niu, ST, Technological parameters evaluation of gas quenching
based on the finite element method, COMPUTATIONAL MATERIALS SCIENCE, 2007, 40, 2,
282-291, 1.135, SCI,
58) Li, HP; Zhao, GQ; Niu, ST; Luan, YG, Technologic parameter optimization of gas quenching
process using response surface method, COMPUTATIONAL MATERIALS SCIENCE, 2007, 38,
4, 561-570, 1.135, SCI,
59) Wu, CS; Chen, J; Zhang, YM, Numerical analysis of both front- and back-side deformation of
fully-penetrated GTAW weld pool surfaces, COMPUTATIONAL MATERIALS SCIENCE, 2007,
39, 3, 635-642, 1.135, SCI/EI,
60) Wu, CS; Zhang, MX; Li, KH; Zhang, YM, Numerical analysis of double-electrode gas metal arc
welding process, COMPUTATIONAL MATERIALS SCIENCE, 2007, 39, 2, 416-423, 1.135,
SCI/EI,
61) Zhao, XY; Yin, YS; Yang, B; Zhu, BH; Tian, XF, Level set and geodesic active contours based
measurement of material removal between serial sections, COMPUTATIONAL MATERIALS
SCIENCE, 2007, 39, 4, 857-861, 1.135, SCI/EI,
62) Ding, HM; Liu, XG; Yu, LN, Influence of zirconium on grain refining efficiency of Al-Ti-C
master alloys, JOURNAL OF MATERIALS SCIENCE, 2007, 42, 23, 9817-9821, 1.081, SCI,
63) Sun, C; Sun, KN, Sol-gel synthesis of Ce-substituted BaFe12O19, JOURNAL OF MATERIALS
SCIENCE, 2007, 42, 14, 5676-5679, 1.081, SCI/EI,
64) Wu, LL; Wu, YS, Synthesis and optical characteristic of ZnO nanorod, JOURNAL OF
MATERIALS SCIENCE, 2007, 42, 1, 406-408, 1.081, SCI/EI,
65) Chen, MA; Wu, CS; Li, SK; Zhang, YM, Analysis of active control of metal transfer in modified
pulsed GMAW, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12, 1,
10-14, 1.03, SCI,
66) Gao, JQ; Wu, CS, Vision based measuring system for both weld pool and root gap in continuous
current GTAW, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12, 1,
50-54, 1.03, SCI,
67) Wu, CS, Preface, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12, 1,
1-1, 1.03, SCI,
68) Dong, XG; Wang, CG; Juan, C, Study on the coagulation process of polyacrylonitrile nascent
fibers during wet-spinning, POLYMER BULLETIN, 2007, 58, 5-6, 1005-1012, 1.022, SCI/EI,
69) Ji, MX; Wang, CG; Bai, YJ; Yu, MJ; Wang, YX, Structural evolution of polyacrylonitrile
precursor fibers during preoxidation and carbonization, POLYMER BULLETIN, 2007, 59, 4,
527-536, 1.022, SCI/EI,
70) Ji, MX; Wang, CG; Bai, YJ; Yu, MJ; Wang, YX, Comparison of tensile fracture morphologies
among various polyacrylonitrile-based carbon fibers, POLYMER BULLETIN, 2007, 59, 3,
381-389, 1.022, SCI/EI,
71) Jing, M; Wang, CG; Bai, YJ; Zhu, B; Wang, YX, Effect of temperatures in the rearmost
stabilization zone on structure and properties of PAN-based oxidized fibers, POLYMER
BULLETIN, 2007, 58, 3, 541-551, 1.022, SCI/EI,
72) Wang, YX; Wang, CG; Ji, MX; Gao, XP; Jing, M, Evaluation of the fluidized preoxidation for
producing high behavior PAN based carbon fiber, POLYMER BULLETIN, 2007, 59, 4, 555-565,
1.022, SCI/EI,
73) Yu, MJ; Wang, CG; Bai, YJ; Ji, MX; Xu, Y, SEM and OM study on the microstructure of
oxidative stabilized polyacrylonitrile fibers, POLYMER BULLETIN, 2007, 58, 5-6, 933-940,
1.022, SCI/EI,
74) Dong, XG; Wang, CG; Bai, YJ; Cao, WW, Effect of DMSO/H2O coagulation bath on the
structure and property of polyacrylonitrile fibers during wet-spinning, JOURNAL OF APPLIED
POLYMER SCIENCE, 2007, 105, 3, 1221-1227, 1.008, SCI/EI,
75) Ji, BH; Wang, CG; Wang, YX, Effect of jet stretch on polyacrylonitrile as-spun fiber formation,
JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 103, 5, 3348-3352, 1.008, SCI,
76) Wang, YX; Wang, CG, Effect of adding sulphur to the dope on properties of modified
polyacrylonitrile fibers, JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 105, 6,
3773-3779, 1.008, SCI/EI,
77) Wang, YX; Wang, CG; Bai, YJ; Bo, Z, Effect of the drawing process on the wet spinning of
polyacrylonitrile fibers in a system of dimethyl sulfoxide and water, JOURNAL OF APPLIED
POLYMER SCIENCE, 2007, 104, 2, 1026-1037, 1.008, SCI/EI,
78) Wang, YX; Wang, CG; Wu, JW; Jing, M, High-temperature DSC study of polyacrylonitrile
precursors during their conversion to carbon fibers, JOURNAL OF APPLIED POLYMER
SCIENCE, 2007, 106, 3, 1787-1792, 1.008, SCI/EI,
79) Wang, YX; Wang, CG; Yu, MJ, Effects of different coagulation conditions on polyacrylonitrile
fibers wet spun in a system of dimethylsulphoxide and water, JOURNAL OF APPLIED
POLYMER SCIENCE, 2007, 104, 6, 3723-3729, 1.008, SCI/EI,
80) Wang, YX; Wang, Q, Evaluation of carbonization tar in making high performance
polyacrylonitrile-based carbon fibers, JOURNAL OF APPLIED POLYMER SCIENCE, 2007,
104, 2, 1255-1259, 1.008, SCI/EI,
81) Pang, LX; Sun, KN; Ren, S; Sun, C; Bi, JQ, Microstructure, hardness, and bending strength of
carbon nanotube-iron aluminide composites, JOURNAL OF COMPOSITE MATERIALS, 2007,
41, 16, 2025-2031, 0.957, SCI/EI,
82) Ma, HJ; Li, YJ; Wang, J, Analysis of the microstructure of Cr-Ni surface layers deposited on
Fe3Al by TIG, MATERIALS CHARACTERIZATION, 2006, 57, 4-5, 419-423, 0.932, SCI,
83) Wu, YY; Liu, XF; Bian, XF, Effect of boron on the microstructure of near-eutectic Al-Si alloys,
MATERIALS CHARACTERIZATION, 2007, 58, 2, 205-209, 0.932, SCI,
84) Chen, J; Wang, CG; Ge, HY; Bai, YJ; Wang, YX, Effect of coagulation temperature on the
properties of poly(acrylonitrile-itaconic acid) fibers in wet spinning, JOURNAL OF POLYMER
RESEARCH, 2007, 14, 3, 223-228, 0.842, SCI/EI,
85) Ge, HY; Liu, JJ; Chen, J; Wang, CG, Texture and properties of acrylonitrile-ammonium itaconate
copolymer precursor fibers and carbon fibers, JOURNAL OF POLYMER RESEARCH, 2007, 14,
2, 91-97, 0.842, SCI/EI,
86) Guan, YJ; Zhao, GQ; Wu, X; Lu, P, Massive metal forming process simulation based on
rigid/visco-plastic element-free Galerkin method, JOURNAL OF MATERIALS PROCESSING
TECHNOLOGY, 2007, 187, , 412-416, 0.816, SCI/EI,
87) Yu, LN; Liu, XF, Ti transition zone on the interface between TiC and aluminum melt and its
influence on melt viscosity, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006,
182, 1-3, 519-524, 0.816, SCI,
88) Zhao, DG; Liu, XF; Pan, YC; Bian, XF; Liu, XJ, Microstructure and mechanical properties of in
situ synthesized (TiB2+Al2O3)/Al-Cu composites, JOURNAL OF MATERIALS PROCESSING
TECHNOLOGY, 2007, 189, 1-3, 237-241, 0.816, SCI/EI,
89) Wang, L; Zhang, YN; Mao, XM; Peng, CX, Formation of NiZr2 binary metallic glass:
Experimental and molecular dynamics analyses, CHINESE PHYSICS LETTERS, 2007, 24, 8,
2319-2322, 0.812, SCI,
90) Wang, YQ; Wu, YQ; Bian, XF, Liquid-liquid structure transition in metallic melts: Experimental
evidence by viscosity measurement, CHINESE PHYSICS LETTERS, 2007, 24, 7, 2028-2031,
0.812, SCI,
91) Wang, YQ; Wu, YQ; Bian, XF, Composition dependence of viscosity for Al(1-x)Mgx(0 <= x <=
0.10) alloys, CHINESE SCIENCE BULLETIN, 2007, 52, 11, 1441-1445, 0.77, SCI,
92) Lv, XQ; Bian, XF; Mao, T; Li, ZK; Guo, J; Zhao, Y, Fragility and structure of Al-Cu alloy melts,
PHYSICA B-CONDENSED MATTER, 2007, 392, 1-2, 34-37, 0.751, SCI/EI,
93) Mao, T; Bian, XF; Xue, XY; Zhang, YN; Guo, J; Sun, BA, Correlation between viscosity of
molten Cu-Sn alloys and phase diagram, PHYSICA B-CONDENSED MATTER, 2007, 387, 1-2,
1-5, 0.751, SCI,
94) Sun, C; Sun, KN, Preparation and characterization of magnesium-substituted LiZn ferrites by a
sol-gel method, PHYSICA B-CONDENSED MATTER, 2007, 391, 2, 335-338, 0.751, SCI/EI,
95) Zhang, HM; Zhao, GQ, Adaptive hexahedral mesh generation based on local domain curvature
and thickness using a modified grid-based method, FINITE ELEMENTS IN ANALYSIS AND
DESIGN, 2007, 43, 9, 691-704, 0.714, SCI/EI,
96) Ma, HJ; Li, YJ; Li, JN; Wang, J, Division of character zones and elements distribution of
Fe3Al/Cr-Ni alloy fusion bonded joint, MATERIALS SCIENCE AND TECHNOLOGY, 2007,
23, 7, 799-802, 0.713, SCI/EI,
97) Ma, HJ; Li, YJ; Wang, J; Yin, YS, Effect of heat treatment on microstructure near diffusion
bonding interface of Fe3Al/18-8 stainless steel, MATERIALS SCIENCE AND TECHNOLOGY,
2006, 22, 12, 1499-1502, 0.713, SCI/EI,
98) Xia, CZ; Li, YJ; Wang, J; Ma, HJ, Microstructure and phase constitution near interface of Cu/Al
vacuum brazing, MATERIALS SCIENCE AND TECHNOLOGY, 2007, 23, 7, 815-818, 0.713,
SCI/EI,
99) Peng, CX; Wang, L; Zhang, YN, Amorphization of Ni nanowires induced by strain rate, ACTA
PHYSICO-CHIMICA SINICA, 2007, 23, 4, 517-520, 0.611, SCI,
100) Hou, JX; Sun, JJ; Zhan, CW; Tian, XL; Chen, XC, The structural change of Cu-Sn melt,
SCIENCE IN CHINA SERIES G-PHYSICS MECHANICS & ASTRONOMY, 2007, 50, 4,
414-420, 0.591, SCI,
101) Lu, ZH; Sun, KN; Sun, XN; Zhu, GN; Li, XQ, Surface modification and hydroxyapatite coating
of carbon nanotubes, JOURNAL OF INORGANIC MATERIALS, 2007, 22, 6, 1127-1130, 0.498,
SCI,
102) Wei-Ming, L; Sheng-Li, L; Shi-Gang, L; Xiao, W, Synthesis and low-temperature sintering
behavior of sr-doped lanthanum chromite powders, JOURNAL OF INORGANIC MATERIALS,
2007, 22, 6, 1061-1064, 0.498, SCI,
103) Wu, CS; Zhang, MX; Li, KH; Zhang, YM, Study on the process mechanism of high-speed arc
welding DE-GMAW, ACTA METALLURGICA SINICA, 2007, 43, 6, 663-667, 0.449, SCI,
104) Chen, YM; Lu, YP; Li, MS, Surface changes of plasma sprayed hydroxyapatite coatings before
and after heat treatment, SURFACE ENGINEERING, 2006, 22, 6, 462-467, 0.444, SCI,
105) Li, XL; Bian, XF; Guo, J; Zhao, Y; Wu, YQ; Sun, BA, Effects of microalloying on glass forming
ability and thermodynamic fragility of Cu-Pr-based amorphous alloys, JOURNAL OF RARE
EARTHS, 2007, 25, 5, 615-618, 0.398, SCI,
106) Bao, QH; Chen, CZ; Wang, DG; Zhao, YF; Lei, TQ; Liu, JM, Hydroxyapatite thin films on
titanium deposited by KrF laser, SURFACE REVIEW AND LETTERS, 2006, 13, 4, 451-455,
0.391, SCI/EI,
107) Bao, RL; Yu, HJ; Chen, CZ; Dong, Q, The effect of rare earth on the structure and performance of
laser clad coatings, SURFACE REVIEW AND LETTERS, 2006, 13, 4, 509-517, 0.391, SCI,
108) Bao, RL; Yu, HJ; Chen, CZ; Qi, B; Zang, LJ, Development of laser cladding wear-resistant
coating on titanium alloys, SURFACE REVIEW AND LETTERS, 2006, 13, 5, 645-654, 0.391,
SCI/EI,
109) Cao, N; Ma, QS; Sui, JL; Wang, QX; Lu, YP; Chen, YM; Li, MS, The experiment of
plasma-sprayed HA coatings on carbon/carbon composites in bone, SURFACE REVIEW AND
LETTERS, 2006, 13, 4, 423-428, 0.391, SCI/EI,
110) Chen, LB, Yttria-stabilized zirconia thermal barrier coatings - A review, SURFACE REVIEW
AND LETTERS, 2006, 13, 5, 535-544, 0.391, SCI/EI,
111) Chen, LB; Chen, CZ; Zhang, L; Qi, B; Lei, TQ, Microstructure of plasma-sprayed Al2O3-ZrO2
composite coatings, SURFACE REVIEW AND LETTERS, 2006, 13, 5, 545-549, 0.391, SCI,
112) Chen, LB; Chen, CZ; Zhang, L; Tian, YS; Lei, TQ, Characterization of isothermal oxidation of air
plasma sprayed NiCrAlY coatings, SURFACE REVIEW AND LETTERS, 2006, 13, 5, 551-555,
0.391, SCI,
113) Dong, Q; Chen, CZ; Wang, DG; Wang, XB, Structure and element distribution of Al2O3 coating
on ZL109 alloy by plasma electrolysis oxidation, SURFACE REVIEW AND LETTERS, 2006,
13, 4, 503-507, 0.391, SCI/EI,
114) Du, BS; Zou, ZD; Wang, XH; Li, QM, In situ synthesis of TiC-TiB2 reinforced FeCrSiB
composite coating by laser cladding, SURFACE REVIEW AND LETTERS, 2007, 14, 2, 315-319,
0.391, SCI/EI,
115) Ma, J; Chen, CZ; Wang, DG; Dang, X; Bao, RL; Yao, L, Surface behavior of bioactive glass of
Si-Na-Ca-P system in simulated body fluid, SURFACE REVIEW AND LETTERS, 2007, 14, 1,
49-55, 0.391, SCI,
116) Pang, LX; Sun, KN; Ren, S; Bi, JQ; Fan, RH, Valence electron structure analysis of interface of
FeAl/TiN composites, SURFACE REVIEW AND LETTERS, 2007, 14, 1, 17-21, 0.391, SCI/EI,
117) Wang, AJ; Lu, YP; Chen, CZ; Sun, RX, Effect of plasma spraying parameters on the sprayed
hydroxyapatite coating, SURFACE REVIEW AND LETTERS, 2007, 14, 2, 179-184, 0.391,
SCI/EI,
118) Wang, DG; Chen, CZ; Bao, QH; Zhang, L; Lei, TQ, Bonding zone morphologies characteristics
of laser remelted HA coatings, SURFACE REVIEW AND LETTERS, 2006, 13, 5, 655-660,
0.391, SCI/EI,
119) Wang, H; Chen, CZ; Wang, DG, Development of hydroxyapatite coating prepared by sol-gel
technique, SURFACE REVIEW AND LETTERS, 2006, 13, 6, 737-745, 0.391, SCI,
120) Zhao, YF; Chen, CZ; Song, MD; Liu, J, Influence of the technical parameters on bioactive films
deposited by pulsed laser, SURFACE REVIEW AND LETTERS, 2007, 14, 2, 283-291, 0.391,
SCI/EI,
121) Zhao, YF; Chen, CZ; Song, MD; Ma, J; Wang, DG, Effects of technical parameters on the pulsed
laser deposited ferroelectric films, SURFACE REVIEW AND LETTERS, 2006, 13, 5, 687-695,
0.391, SCI/EI,
122) Li, Y; Gerasimov, SA; Puckov, UA; Ma, H; Wang, J, Microstructure performance on TIG
welding zone of Fe3Al and 18-8 dissimilar materials, MATERIALS RESEARCH
INNOVATIONS, 2007, 11, 3, 133-136, 0.388, SCI/EI,
123) Sun, C; Sun, KN, Synthesis and characterization of LiZn ferrite-coated CNT via a sol-gel method,
ADVANCED COMPOSITES LETTERS, 2006, 15, 5, 169-172, 0.314, SCI,
124) Pan, YC; Liu, XF; Hua, Y, Sr microalloying for refining grain size of AZ91D magnesium alloy,
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE
EDITION, 2007, 22, 1, 74-76, 0.312, SCI/EI,
125) Li, AJ; Sun, KN; Gong, HY; Fan, RH, Study on TiN, AlN/Al2O3 Ceramic composites, RARE
METAL MATERIALS AND ENGINEERING, 2007, 36, , 604-607, 0.286, SCI,
126) Zhao, XY; Yin, YS; Yang, B, Dominant point detecting based non-uniform B-spline
approximation for grain contour, SCIENCE IN CHINA SERIES E-TECHNOLOGICAL
SCIENCES, 2007, 50, 1, 90-96, 0.265, SCI/EI,
127) Li, QM; Wang, XH; Zou, ZD; Wu, J, Effect of activating flux on arc shape and arc voltage in
tungsten inert gas welding, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF
CHINA, 2007, 17, 3, 486-490, 0.264, SCI/EI,
128) Liu, DM; Jiang, RL; Sha, JB, Microstructure and high-temperature mechanical properties of
Nb-silicide based in-situ composites, TRANSACTIONS OF NONFERROUS METALS
SOCIETY OF CHINA, 2006, 16, , S2022-S2025, 0.264, SCI,
129) Wu, XH; Zhao, GQ; Luan, YG; Lou, SM; Ma, XW, Structure optimization of porthole die based
on aluminum profile extrusion process numerical simulation, TRANSACTIONS OF
NONFERROUS METALS SOCIETY OF CHINA, 2006, 16, , S1261-S1264, 0.264, SCI,
130) Wang, CC; Min, GH; Kang, SB, Fabrication, microstructure and properties of SiCp/Cu heat sink
materials, RARE METALS, 2006, 25, , 232-236, 0.204, SCI,
131) Yu, HS; Chen, HM; Ma, RD; Min, GH, Fabrication of AlN-TiC/Al composites by gas injection
processing, RARE METALS, 2006, 25, 6, 659-664, 0.204, SCI/EI,
132) Bai, YJ; Bian, J; Wang, CG; Zhu, B; Liu, YX; Geng, GL, Microstructural origin of degradation of
shape memory effect during martensite aging of CuZnAlMnNi alloy, JOURNAL OF
ADVANCED MATERIALS, 2007, , , 80-83, 0.15, SCI,
133) Wang, CC; Min, GH; Kang, SB, Microstructure and thermal conductivity of SiCp/Cu heat sink
materials, METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2007, 29, 3, 297-304, 0.15, SCI,
134) Cao, N; Li, M; Ma, Q; Bai, Y; Wang, C, Biomedical coatings prepared on Carbon/Carbon
composites, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2007, 14, 3,
241-249, 0.107, SCI,
135) Zhang, GF; Jia, Y; Sun, S; Wu, LL; Zhao, GQ; An, LJ, Investigation of the gel effect in reactive
extrusion processes for free radical polymerization, MACROMOLECULAR REACTION
ENGINEERING, 2007, 1, 3, 321-330, 0, SCI,
EI 收录文章目录（不含 SCI/EI 同时收录文章）
136) Bai, Yun-Qiang; Li, Mu-Sen; Cao, Ning; Wang, Cheng-Xiang, Effect of ultrasonic wave and heat
treatment on the crystallinity and morphology of hydroxyapatite, Cailiao Rechuli
Xuebao/Transactions of Materials and Heat Treatment, 2007, v 28, n 2, p 22-25, EI,
137) Bian, Xiufang; Guo, Jing; Lv, Xiaoqian; Qin, Xubo; Wang, Caidong, Prediction of glass-forming
ability of metallic liquids, Applied Physics Letters, 2007, v 91, n 22, p 221910, EI,
138) Cao, Weiwei; Zhu, Bo; Wang, Chengguo, Numerical simulation on the radiation intensity
distribution of carbon fiber infrared electric heating radiator, Jixie Gongcheng Xuebao/Chinese
Journal of Mechanical Engineering, 2007, v 43, n 7, p 6-10, EI,
139) Chang, Sun; Kangning, Sun, Synthesis and characterization of LiZn ferrite-coated CNT via a
sol-gel method, Advanced Composites Letters, 2006, v 15, n 5, p 169-172, EI,
140) Chen, Chuanzhong; Chen, Lubin; Zhang, Liang; Qi, Biao; Lei, Ting-Quan, Microstructure of
plasma-sprayed Al₂O₃-ZrO ₂ composite coatings, Surface
Review and Letters, 2006, v 13, n 5, p 545-549, EI,
141) Chen, Chuanzhong; Chen, Lubin; Zhang, Liang; Tian, Yongsheng; Lei, Ting-Quan,
Characterization of isothermal oxidation of air plasma sprayed NiCrAlY coatings, Surface
Review and Letters, 2006, v 13, n 5, p 551-555, EI,
142) Chen, Ji; Wu, Chuansong, Prediction and verification of melting front in GTA weld pool of
full-penetration, China Welding (English Edition), 2006, v 15, n 4, p 1-4, EI,
143) Chen, Mao-Ai; Wu, Chuan-Song; Liu, Guo-Dong, Microstructure and properties of weld of laser
beam welded SiC particle reinforced LD2 Al alloy matrix composite, Hanjie Xuebao/Transactions
of the China Welding Institution, 2006, v 27, n 9, p 51-54, EI,
144) Ding, Haimin; Liu, Xiangfa; Yu, Lina, Influence of zirconium on grain refining efficiency of
Al-Ti-C master alloys, Journal of Materials Science, 2007, v 42, n 23, p 9817-9821, EI,
145) Dong, Xing-Guang; Wang, Cheng-Guo; Cao, Wei-Wei; Chen, Juan, The effect of the coagulation
bath on the structure and property of the PAN fibers, Gaofenzi Cailiao Kexue Yu
Gongcheng/Polymeric Materials Science and Engineering, 2007, v 23, n 2, p 170-173+178, EI,
146) Gao, Jinqiang; Wu, Chuansong; Zhang, Min; Zhao, Yanhua, Vision-based detection of MAG
weld pool, China Welding (English Edition), 2007, v 16, n 1, p 32-35, EI,
147) Guan, Xiao-Jun; Jiao, Xian-You; Zhou, Jia-Juan; Zhang, Ji-Xiang; Liu, Yun-Teng; Shen,
Xiao-Min; Ma, Xiao-Fei, Cellular automata simulation of single grain growth, Zhongguo Youse
Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2007, v 17, n 5, p 699-703, EI,
148) Han, N.; Bian, X.F.; Li, Z.K.; Mao, T.; Wang, C.D., Effect of Si on the microstructure and
mechanical properties of the Al-4.5%Cu alloy, Acta Metallurgica Sinica (English Letters), 2006,
v 19, n 6, p 405-410, EI,
149) He, Wen-Jun; Min, Guang-Hui; Tolochko, O.V.; Yu, Hua-Shun, Effect of annealing temperature
on the microstructure of rapidly-solidified TiNi-Cu alloy ribbons, Gongneng Cailiao/Journal of
Functional Materials, 2007, v 38, n 2, p 261-264, EI,
150) Hu, Qingxian; Wu, Chuansong, Analysis of keyhole geometry in plasma arc welding, China
Welding (English Edition), 2006, v 15, n 4, p 43-45, EI,
151) Hu, Qingxian; Wu, Chuansong; Zhang, Yuming, Experimental determination of the weld
penetration evolution in keyhole plasma arc welding, China Welding (English Edition), 2007, v
16, n 1, p 6-8, EI,
152) Hu, Qingxian; Wu, Chuansong; Zhang, Yuming, Finite element analysis of keyhole plasma arc
welding based on an adaptive heat source mode, China Welding (English Edition), 2007, v 16, n 2,
p 55-58, EI,
153) Hui, Wang; Chuanzhong, Chen; Diangang, Wang, Development of hydroxyapatite coating
prepared by sol-gel technique, Surface Review and Letters, 2006, v 13, n 6, p 737-745, EI,
154) Huiping, Li; Guoqun, Zhao; Shanting, Niu; Chuanzhen, Huang, FEM simulation of quenching
process and experimental verification of simulation results, Materials Science and Engineering A,
2007, v 452-453, , p 705-714, EI,
155) Huiping, Li; Guoqun, Zhao; Shanting, Niu; Yiguo, Luan, Technologic parameter optimization of
gas quenching process using response surface method, Computational Materials Science, 2007, v
38, n 4, p 561-570, EI,
156) Ji, Bao-Hua; Wang, Cheng-Guo; Wang, Yan-Xiang; Zhu, Bo, Study on the diffusion coefficients
during coagulation process of polyacrylonitrile as-spun fibers, Gongneng Cailiao/Journal of
Functional Materials, 2007, v 38, n 6, p 1030-1033, EI,
157) Jie, Ma; Chuanzhong, Chen; Diangang, Wang; Xing, Dang; Ruiliang, Bao; Liang, Yao, Surface
behavior of bioactive glass of Si-Na-Ca-P system in simulated body fluid, Surface Review and
Letters, 2007, v 14, n 1, p 49-55, EI,
158) Jing, Guo; Xiufang, Bian; Tao, Lin; Yan, Zhao; Li, Taibao; Bo, Zhang; Baoan, Sun, Formation
and interesting thermal expansion behavior of novel Sm-based bulk metallic glasses,
Intermetallics, 2007, v 15, n 7, p 929-933, EI,
159) Li, Hesheng; Gong, Jianhong; Zheng, Kefang; Li, Musen, Synthesizing II b type diamond single
crystal from an Fe-Ni-C-B system at high temperature and high pressure, Beijing Keji Daxue
Xuebao/Journal of University of Science and Technology Beijing, 2007, v 29, n 2, p 112-118+167,
EI,
160) Li, Huiping; Zhao, Guoqun; Huang, Chuanzhen; Niu, Shanting, Multi-objective optimization of
technological parameters during the gas quenching process, Jixie Gongcheng Xuebao/Chinese
Journal of Mechanical Engineering, 2007, v 43, n 1, p 110-115+119, EI,
161) Li, Li; Wang, Cheng-Guo; Li, Tong-Sheng; Chen, Wen-Zhong, Study on thermal conducting
insulating polycarbonate and polycarbonate/ABS polymers, Cailiao Rechuli Xuebao/Transactions
of Materials and Heat Treatment, 2007, v 28, n 4, p 51-54, EI,
162) Li, Li; Xu, Bin; Gong, Jian-Hong; Li, Mu-Sen, Valence electron structure analysis of catalyst
during diamond synthesis under HPHT, Gaoya Wuli Xuebao/Chinese Journal of High Pressure
Physics, 2006, v 20, n 4, p 372-378, EI,
163) Li, Ya-Jiang; Gerasimov, S.A.; Wang, Juan; Ma, Hai-Jun; Ren, Jiang-Wei, A study of vacuum
diffusion bonding and interface structure of Ti/Al dissimilar materials, Cailiao Kexue yu
Gongyi/Material Science and Technology, 2007, v 15, n 2, p 206-210, EI,
164) Li, Ya-Jiang; Liu, Peng; Wang, Juan; Xia, Chun-Zhi, Microstructure of EMP-TIG welded Mg/Al
dissimilar metal joint, Hanjie Xuebao/Transactions of the China Welding Institution, 2006, v 27, n
9, p 39-42, EI,
165) Li, Ya-Jiang; Wang, Juan; Puskov, U.A.; Ma, Hai-Jun, Effect of Cr and Ni on microstructure in
Fe₃Al/steel diffusion-welded interface, Cailiao Kexue yu Gongyi/Material Science
and Technology, 2007, v 15, n 4, p 469-472+476, EI,
166) Li, Yajiang; Wang, Juan; Xia, Chunzhi, Interface microstructure and diffusion mechanism in the
diffusion bonding of copper and aluminum, International Journal for the Joining of Materials,
2006, v 18, n 3-4, p 94-98, EI,
167) Liu, Jie; Sun, Sheng; Guan, Yanjin, Finite element simulation of the laser bending of stainless
steel foil, Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of
Science and Technology (Natural Science Edition), 2007, v 35, n SUPPL. 1, p 157-159, EI,
168) Liu, Weiming; Li, Jing; Li, Shengli; Li, Shigang; Zhu, Xinde; Li, Hong, Structure characteristic of
lanthanum chromites nano-powder by low-temperature combustion synthesis, Kuei Suan Jen
Hsueh Pao/ Journal of the Chinese Ceramic Society, 2006, v 34, n 10, p 1279-1282, EI,
169) Long, Yunze; Chen, Zhaojia; Shen, Jiaoyan; Zhang, Zhiming; Zhang, Lijuan; Xiao, Hongmei;
Wan, Meixiang; Duvail, Jean Luc, Magnetic properties of conducting polymer nanostructures,
Journal of Physical Chemistry B, 2006, v 110, n 46, p 23228-23233, EI,
170) Lou, Shumei; Zhao, Guoqun; Wang, Rui; Wu, Xianghong, Application of finite volume method
into simulation of transient flow of three-dimentional aliminium extrusion, Jixie Gongcheng
Xuebao/Chinese Journal of Mechanical Engineering, 2007, v 43, n 2, p 122-126, EI,
171) Lu, Yu-Peng; Chen, Yan-Mei; Zhu, Rui-Fu; Li, Mu-Sen; Lei, Ting-Quan, Phase composition and
microstructure of plasma sprayed hydroxyapatite coating, Cailiao Kexue yu Gongyi/Material
Science and Technology, 2007, v 15, n 4, p 492-495+499, EI,
172) Lu, Zhihua; Sun, Kangning; Ren, Shuai; Li, Xuanqi, Synthesis and characterization of
multi-walled carbon nanotubes/hydroxyapatite composite, Kuei Suan Jen Hsueh Pao/ Journal of
the Chinese Ceramic Society, 2007, v 35, n 6, p 687-689, EI,
173) Lu, Zhihua; Sun, Kangning; Zhao, Zhongfan, In-situ synthesis of carbon
nanotubes/hydroxyapatite composite powder, Kuei Suan Jen Hsueh Pao/ Journal of the Chinese
Ceramic Society, 2007, v 35, n 2, p 212-215, EI,
174) Ma, Haijun; Li, Yajiang; Gerasimov, S.A.; Wang, Juan, Microstructure and phase constituents
near the fusion zone of Fe₃Al/Cr-Ni alloys joints produced by MAW, Materials
Chemistry and Physics, 2007, v 103, n 1, p 195-199, EI,
175) Qi, Yongtian; Zou, Zengda; Qu, Shiyao; Zhu, Qingjun, Fe-based alloy composite coating
reinforced by Ti (C_0.3N_0.7) particle through laser cladding technology,
Hanjie Xuebao/Transactions of the China Welding Institution, 2007, v 28, n 11, p 33-36, EI,
176) Ruiliang, Bao; Huijun, Yu; Chen, Chuanzhong; Dong, Qing, The effect of rare earth on the
structure and performance of laser clad coatings, Surface Review and Letters, 2006, v 13, n 4, p
509-517, EI,
177) Shen, Xiao-Min; Guan, Xiao-Jun; Zhang, Ji-Xiang; Liu, Yun-Teng; Ma, Xiao-Fei; Zhao,
Xian-Ming, Coupling of FEM with Monte Carlo for simulating recrystallization in cold rolling
pure aluminum sheet, Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals,
2007, v 17, n 1, p 124-130, EI,
178) Shi, J.Z.; Chen, C.Z.; Zhang, Shujuan; Wu, Yingjing, Application of surface modification in
biomedical materials research, Surface Review and Letters, 2007, v 14, n 3, p 361-369, EI,
179) Sun, Chunjing; Geng, Haoran; Zhang, Ning; Teng, Xinying; Ji, Leilei, Viscous feature of Sb-Bi
alloy under magnetic field, Materials Letters, 2008, v 62, n 1, p 73-76, EI,
180) Tian, Y.S.; Wang, D.Y.; Chen, C.Z., Effect of laser processing parameters on the coating's
microstructure and quality, Surface Review and Letters, 2007, v 14, n 5, p 885-890, EI,
181) Tian, Yong-Sheng; Chen, Chuan-Zhong; Wang, De-Yun; Lei, Ting-Quan, Fabricating ceramic
hard thin films by vapor deposition techniques, Cailiao Kexue yu Gongyi/Material Science and
Technology, 2007, v 15, n 3, p 439-444, EI,
182) Wang, Ai-Juan; Lu, Yu-Peng; Zhu, Rui-Fu; Sun, Rui-Xue; Xiao, Gui-Yong, Effect of sintering on
microstructure and property of hydroxyapatite microspheres, Cailiao Rechuli
Xuebao/Transactions of Materials and Heat Treatment, 2007, v 28, n SUPPL., p 355-358, EI,
183) Wang, Juan; Li, Yajiang; Gerasimov, S.A., Interfacial microstructure and strength of diffusion
brazed joint between Al₂O₃-TiC and 9Cr1MoV steel, Bulletin of
Materials Science, 2007, v 30, n 4, p 415-419, EI,
184) Wang, Juan; Li, Ya-Jiang; Ma, Hai-Jun; Liu, Peng, Microstructure in diffusion bonded
TiC-Al₂O₃/W18Cr4V joint with Ti/Cu/Ti composite interlayer, Hanjie
Xuebao/Transactions of the China Welding Institution, 2006, v 27, n 9, p 9-12, EI,
185) Wang, Qi-Fen; Wang, Cheng-Guo; Wang, Yan-Xiang; Yang, Mao-Wei; Yu, Mei-Jie, Effect of
structure on tensile strength of PAN fiber, Gongneng Cailiao/Journal of Functional Materials,
2006, v 37, n 11, p 1787-1789, EI,
186) Wang, Su-Mei; Sun, Kang-Ning; Liu, Rui; Bi, Jian-Qiang, Effect of the second phase on grain
refinement of 2A12 aluminum alloy by ECA pressing, Cailiao Kexue yu Gongyi/Material Science
and Technology, 2007, v 15, n 1, p 115-117, EI,
187) Wang, X.H.; Song, S.L.; Qu, S.Y.; Zou, Z.D., Characterization of in situ synthesized TiC particle
reinforced Fe-based composite coatings produced by multi-pass overlapping GTAW melting
process, Surface and Coatings Technology, 2007, v 201, n 12, p 5899-5905, EI,
188) Wu Yuying; Xiangfa, Liu; Xiufang, Bian, Effect of boron on the microstructure of near-eutectic
Al-Si alloys, Materials Characterization, 2007, v 58, n 2, p 205-209, EI,
189) Wu, C.S.; Jia, C.B., Statistical characteristic for detecting weld penetration defects in gas-metal
arc welding, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of
Engineering Manufacture, 2006, v 220, n 5, p 793-796, EI,
190) Wu, C.S.; Wang, H.G.; Zhang, Y.M., A new heat source model for keyhole plasma arc welding in
FEM analysis of the temperature profile, Welding Journal (Miami, Fla), 2006, v 85, n 12, p
284-s-291-s, EI,
191) Wu, Ji-Wei; Wang, Cheng-Guo; Wang, Yan-Xiang; Yang, Mao-Wei, Effect of stretch on the
performance of PAN fibers during the wet-spin production process, Gongneng Cailiao/Journal of
Functional Materials, 2007, v 38, n 5, p 771-773, EI,
192) Wu, Jun; Zou, Zengda; Wang, Xinhong, Effect of t_8/5 on the microstructure and
properties of the HAZ of ASME SA213-T92 steel by thermal simulation, China Welding (English
Edition), 2007, v 16, n 3, p 36-40, EI,
193) Wu, Lili; Jia, Yuxi; Sun, Sheng; Yao, Weiguo; Zhang, Guofang; Zhao, Guoqun; An, Lijia,
Numerical simulation of reactive extrusion processes for anionic polymerization of styrene,
Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2007, v 21, n 1, p 51-56, EI,
194) Wu, Xin; Zhao, Guo-Qun; Guan, Yan-Jin; Lu, Ping; Ma, Xin-Wu, Meshless galerkin
thermo-mechanical analysis of the backward extrusion process, Gongcheng Lixue/Engineering
Mechanics, 2007, v 24, n 6, p 180-184, EI,
195) Wu, Xin; Zhao, Guo-Qun; Wang, Wei-Dong, Rigid-plastic meshless method for two-dimensional
metal forming problems with arbitrarily shaped dies, Jisuan Lixue Xuebao/Chinese Journal of
Computational Mechanics, 2007, v 24, n 3, p 280-284, EI,
196) Wu, Yu-Ying; Liu, Xiang-Fa; Dai, Yong; Jiang, Bing-Gang; Bian, Xiu-Fang, Influence of
morphology and content of silicon phase on CTE of Al-Si alloys, Zhongguo Youse Jinshu
Xuebao/Chinese Journal of Nonferrous Metals, 2007, v 17, n 5, p 688-692, EI,
197) Xiao, Gui-Yong; Lu, Yu-Peng; Zhu, Rui-Fu; Xu, Wen-Hua; Wang, Ai-Juan, Effect of
heat-treatment and SBF immersion on mechanical properties of hydroxyapatite coatings, Cailiao
Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2007, v 28, n SUPPL., p 146-149,
EI,
198) Xu, Guoxiang; Wu, Chuansong; Chen, Maoai, Determining the boundaries of globular-to-spray
transfer in robotic GMAW, China Welding (English Edition), 2006, v 15, n 4, p 75-78, EI,
199) Yanjin, Guan; Guoqun, Zhao; Gang, Cheng, FEA and testing studies on static camber
performance of the radial tire, Journal of Reinforced Plastics and Composites, 2007, v 26, n 18, p
1921-1936, EI,
200) Yin, Qiang; Sun, Kang-ning; Li, Ai-ju; Shao, Lei; Liu, Song-ming; Sun, Chang, Study on carbon
nanotube reinforced phenol formaldehyde resin/graphite composite for bipolar plate, Journal of
Power Sources, 2008, v 175, n 2, p 861-865, EI,
201) Yu, Yan-Jun; Jia, Yu-Xi; Sun, Sheng; Yang, Jun-Ying; Wu, Li-Li; Yao, Wei-Guo; Shi, Tong-Fei,
Application of statistical theory of cross-linking reaction to numerical simulation of curing
processes in RTM, Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and
Engineering, 2007, v 23, n 3, p 214-218, EI,
202) Zhang, Hongmei; Zhao, Guoqun, 3D automated generation of density-changed all-hexahedral
element meshes based on local surface curvature and thickness of solid object, Jixie Gongcheng
Xuebao/Chinese Journal of Mechanical Engineering, 2006, v 42, n 12, p 42-46, EI,
203) Zhang, Jinsheng; Yin, Yansheng; Lu, Yinong; Zhang, Yinyan; Ma, Laipeng; Zhang, Shuqing,
Incrusting structure of nanosized Fe₃O₄ particles in magnetic fluids,
Science in China, Series E: Technological Sciences, 2003, v 46, n 4, , EI,
204) Zhang, Mingxian; Wu, Chuansong; Li, Kehai; Zhang, Yuming, FEA based prediction of weld
dimension in new DE-GMAW process, Hanjie Xuebao/Transactions of the China Welding
Institution, 2007, v 28, n 2, p 33-37, EI,
205) Zhang, Shiliang; Gao, Jinqiang; Wu, Chuansong; Zhang, Yuming, Specular reflection based
sensing surface deformation of gas tungsten arc weld pool, China Welding (English Edition),
2007, v 16, n 2, p 1-4, EI,
206) Zhang, Yujun; Zhang, Jingchao; Tan, Shali; Tan, Xunyan, Effect of CeO₂ supports
on CO oxidation activity of Pd-Cu catalyst, Key Engineering Materials, 2007, v 336-338, , p
1992-1994, EI,
207) Zhao, Ming; Chen, Ji; Wu, Chuansong, Predicting the occurrence tendency of burn-through for
fully-penetrated GTA weld pool, China Welding (English Edition), 2006, v 15, n 4, p 18-22, EI,
208) Zhao, Ming; Wu, Chuansong; Chen, Ji, Predicting of the collapsing for completely penetrated
GTA weld pool, Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2007, v
43, n 6, p 68-71, EI,
209) Zhao, Ming; Wu, Chuan-Song; Chen, Mao-Ai, Solutions for latent heat of phase change in
numerical analysis of arc welding, Hanjie Xuebao/Transactions of the China Welding Institution,
2006, v 27, n 9, p 55-58+62, EI,
210) Zhao, Yan; Bian, Xiufang; Qin, Jingyu; Qin, Xubo; Hou, Xiaoxia, Structural evolution in the
solidification process of Cu-Sn alloys, Journal of Non-Crystalline Solids, 2007, v 353, n 52-54, p
4845-4848, EI,
211) Zhu, Qingjun; Zou, Zengda; Wang, Xinhong; Qu, Shiyao, Forming conditions of Fe-Ni-Si-B
amorphous coating by laser cladding, Hanjie Xuebao/Transactions of the China Welding
Institution, 2007, v 28, n 9, p 91-94, EI,
212) Zhu, Xinde; Li, Shengli; Sun, Liangcheng; Liu, Weiming, Electrical properties of Ca-doped
lanthanum chromites, Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society, 2006, v
34, n 12, p 1532-1536, EI,
2006 年度
2006 年度，实验室发表的论文中有 53 篇被 SCI 收录，有 24 篇被 EI 收录（不含同时被 SCI 收录的论文）。
其中，影响因子超过 2 的论文有 6 篇。
1.
L.N. Hu, X.F. Bian, X.B. Qin, Y.Z. Yue, C.D Wang, Thermodynamic basis for cluster kinetics:
prediction of the fragility of marginal metallic glass-forming liquid, J. Phys. Chem. B,
110(2006)21950(4.033)
2.
Y.J. Bai, C.G. Wang, N. Lun, M.J. Yu, B. Zhu, HRTEM microstructures of PAN precursor fibers,
Carbon, 44(2006)1773 (3.419)
3.
T.K. Gu, X.F. Bian, J.Y. Qin, C.Y. Xu, Ab initio molecular-dynamics simulations of liquid GaSb and
InSb, Physical review B, 71 (2006)104206 (3.185)
4.
T.K. Gu, J.Y. Qin, X.F. Bian, C.Y. Xu, Structure change of liquid GaSb under pressure: An ab initio
molecular-dynamics simulation, The journal of chemical physics, 125 (2006)94506? (3.138)
5.
J. Guo, X.F. Bian, Q.G. Meng, Y. Zhao, S.H. Wang, C.D. Wang, T.B. Li, Glass-forming ability and
fragility of RE55Al25Co20(RE=Ce, Pr, Nd, Sm, Gd) alloys, Scripta materialia, 55 (2006)1027 (2.228)
6.
Y.J. Bai, C.G. Wang, Y.X. Qi, B. Zhu, Y.X. Wang, Y.X. Liu, G.L. Geng, Rapid synthesis of Si3N4
dendritic crystals, Scripta materialia, 54(2006)447 (2.228)
7.
L. Wang, C.X. Peng, Y.Q. Wang, Y.N. Zhang, Vitrification and crystallization of metallic liquid under
pressures, Journal of physics-condensed matter, 18(2006)7559(2.145)
SCI 收录论文目录
1.
X.F. Bian, L.N. Hu, C.D Wang, Degree of local structural ordering and its correlation with the glass
forming ability of alloys, Journal of Non-crystalline solids, 352(2006)4149
2.
X.F. Bian, B.A. Sun, L.N. Hu, Medium-Range order structure and fragility of superheated melts of
amorphous CuHf alloys, Chinese physics letters, 23(2006)1864
3.
L.N. Hu, X.F. Bian, X.B. Qin, Y.Z. Yue, C.D Wang, Thermodynamic basis for cluster kinetics:
prediction of the fragility of marginal metallic glass-forming liquid, J. Phys. Chem. B, 110(2006)21950
4.
Y. Zhao, X.F. Bian, X.B. Qin, J.Y. Qin, X.X. Hou, X-ray diffraction experiments on In30Sn70 from
normal liquid to solidus, Physics letters A, 356( 2006)385
5.
Y. Zhao, X.F. Bian, X.B. Qin, J.Y. Qin, X.X. Hou, X-ray diffraction experiments on the solidification
process of Cu80Ag20 alloy, Physics letters A, 357 (2006)479
6.
Y. Zhao, X.F. Bian, X.X. Hou, Viscosity and fragility of the supercooled and superheated liquids of the
Ni60Zr30Al10 metallic glass-forming alloy, Physica A, 367 (2006)42
7.
Y.Q. Wang, Y.Q. Wu, J.T. Liu, X.F. Bian, Discontinuous structural phase transition behaviour in
multiple component alloy melts, Chinese physics letters, 23 (2006)2513
8.
S.R. Wang, H.R. Geng, Y.Z. Wang, B. Sun, The abrasive wear properties of Al-Mg-Si3Ni4 metal matrix
composites, Journal of materials engineering and performance, 15 (2006)549
9.
S. R. Wang, H.R. Geng, Y.Z. Wang, Si3Ni4/Mg composites with an interpenetrating network, Journal of
materials science, 41 (2006)5751
10. T.K. Gu, J.Y. Qin, X.F. Bian, C.Y. Xu, Structure change of liquid GaSb under pressure: An ab initio
molecular-dynamics simulation, The journal of chemical physics, 125 (2006)94506
11. J. Guo, X.F. Bian, Q.G. Meng, Y. Zhao, S.H. Wang, C.D. Wang, T.B. Li, Glass-forming ability and
fragility of RE55Al25Co20(RE=Ce, Pr, Nd, Sm, Gd) alloys, Scripta materialia, 55 (2006)1027
12. X.H. Wang, M. Zhang, Z.D. Zou, S.Y. Qu, Microstructure and wear properties of TiC-VC reinforced
iron based hardfacing layers, Materials science and technology, 22(2006)193
13. T. Lin, X.F. Bian, J. Jiang, Relation between calculated Lennard-Jones potential and thermal stability of
Cu-based bulk metallic glasses, Physics letters A, 353 (2006)497
14. T. Lin, X.F. Bian, J. Jiang, Y. Dong, Effect of Ni on glass-forming ability of Cu-Ti-based amorphous
alloys, Transactions of Nonferrous metals society of China, 16 (2006)604
15. N. Han, X.F. Bian, Z.K. Li, T. Mao, C.D. Wang, Effect of Si on the microstructure and mechanical
properties of the Al-4.5%Cu alloys, Acta Metall. Sin. (English letters), 19 (2006)405
16. K.B. Yin, X.F. Bian, N. Han, X.J. Yao, Y. Zhao, J.K. Zhou, Effect of the addition of Al-Ti-C master
alloy on the microstructure and microhardness of a cast Al-10Mg alloy, Journal of University of Science
and Technology Beijing, 13 (2006)149
17. L. Wang, Y.Q. Wang, C.X. Peng, Y.N. Zhang, Medium-range structural order in liquid Ni20Al80 alloy:
Experimental and molecular dynamics studies, Physics letters A, 350(2006)405
18. L. Wang, Y.Q. Wang, C.X. Peng, Y.N. Zhang, Relating nucleation to dynamical and structural
heterogeneity in supercooled liquid metal, Physics letters A, 350(2006)69
19. L. Wang, H.R. Cong, Y.N. Zhang, X.F. Bian, Medium-range order of liquid metal in the quenched state,
Physica B, 355(2006)140
20. L. Wang, C.X. Peng, Y.Q. Wang, Y.N. Zhang, Vitrification and crystallization of metallic liquid under
pressures, Journal of physics-condensed matter, 18(2006)7559
21. W.M. Wang, P. Jia, S.H. Wang, Y.C. Niu, X.F. Bian, Structure characterization of amorphous
Al83Ni10Ce5Si2 under the relaxed annealing, Glass physics and chemistry, 32(2006)511
22. W.M. Wang, Y.C. Niu, S.F. Jin, Y.N. Zhang, X.F. Bian, J.M. Liu, Effect of cluster deposition on the
eutectic structure in binary systems: A Monte-Carlo simulation, Journal of alloys and compounds,
407(2006)215
23. Y.N. Zhang, L. Wang, W.M. Wang, J.K. Zhou, Structural transition of sheared-liquid metal in quenching
state, Physics letters A, 355(2006)142
24. H.S. Yu, H.M. Chen, L.M. Sun, G.H. Min, Preparation of Al-Al3Ti in situ composites by direct reaction
method, Rare Metals, 25(2006)32
25. Y.J. Bai, C.G. Wang, N. Lun, M.J. Yu, B. Zhu, HRTEM microstructures of PAN precursor fibers,
Carbon, 44(2006)1773
26. Y.J. Bai, C.G. Wang, Y.X. Qi, B. Zhu, Y.X. Wang, Y.X. Liu, G.L. Geng, Rapid synthesis of Si3N4
dendritic crystals, Scripta materialia, 54(2006)447
27. J.J. Liu, H.Y. Ge, C.G. Wang, Modification of polyacrylonitrile precursors for carbon fiber via
copolymerization of Acrylonitrile with ammonium Itaconate, Journal of applied polymer science,
102(2006)2175
28. M.J. Yu, C.G. Wang, Y.J. Bai, Y.X. Wang, Q.F. Wang, H.Z. Liu, Combined effect of processing
parameters on thermal stabilization of PAN fibers, Polymer Bulletin, 57(2006)525
29. M. Jing, C.G. Wang, Y.J. Bai, B. Zhu, Y.X. Wang, Effect of temperatures in the rearmost stabilization
zone on structure and properties of PAN-based oxidized fibers, Polymer Bulletin, 006-0692-2
30. J. Chen, C.G. Wang, X.G. Dong, H.Z. Liu, Study on the coagulation mechanism of wet-spinning PAN
fibers, Journal of polymer research, 2006,13(6):515-519
31. J.X. Hou, H.X. Guo, C.W. Zhan, X.L. Tian, X.C. Chen, Viscous and magnetic properties of liquid
Cu-25wt.%Sn alloy, Materials letters, 60(2006)2038
32. J.X. Hou, H.X. Guo, J.J. Sun, X.L. Tian, C.W. Zhan, X.B. Qin, X.C. Chen, Structure change of Pb melt,
Physics letters A, 358(2006)171
33. D.G. Zhao, X.F. Liu, Y.C. Pan, Y.X. Liu, X.F. Bian, Microstructure and mechanical behavior of
AlSiCuMgNi piston alloys reinforced with TiB2 particles, Journal of materials science, 41(2006)4227
34. LN. Yu, X.F. Liu, Z.Q. Wang, J.W. Liu, Instability of TiC and TiAl3 compounds in Al-10Mg and
Al-5Cu alloys by addition of Al-Ti-C master alloy, Journal of University of Science and Technology
Beijing, 13(2006)144
35. LN. Yu, X.F. Liu, The relationship between viscosity and refinement efficiency of pure aluminum by
Al-Ti-B refiner, Journal of alloys and compounds, 425(2006)245
36. Y.Y. Wu, X.F. Liu, X.F. Bian, Effect of AlP on the eutectic nucleation in Ni–38 wt.%Si alloys,
Materials Science and Engineering A, 427(2006)69
37. K.N. Sun, J.Q. Bi, R. Liu, The strengthening and toughening mechanism of Fe-Al/Al2O3 composite mat
K.N. Sun erials, Journal of Wuhan University of Technology, 21(2006)10
38. C. Sun, K.N. Sun, Synthesis and characterization of LiZn ferrite-coated CNTs via a SOL-GEL method,
Advanced Composite letters, 15(2006)169
39. A.J. Li, Y.H. Zhen, Q. Yin, L.P. Ma, Y.S. Yin, Microstructure and properties of (SiC, TiB2)/B4C
composites by reaction hot pressing, Ceramic International, 32(2006)849
40. R.H. Fan, L. Qi, K.N. Sun, G.H. Min, H.Y. Gong, The bonding character and magnetic properties of
Fe3Al: comparison between disordered and ordered alloy, Physics letters A, 360(2006)371
41. R.H. Fan, H.L. Lu, K.N. Sun, W.X. Wang, X.B. Yi, Kinetics of thermite reaction in Al-Fe2O3 system,
Thermochimica acta, 440(2006)129
42. 武传松，赵朋成，熔透溶池表面下塌变形的动态演变过程分析，金属学报，42(2006)865
43. 武传松，王怀刚，张明贤，小孔等离子弧焊接热场瞬时演变过程的数值分析，金属学报，42(2006)311
44. M.A. Chen, C.S. Wu, Z.D. Zou, Electron bean welding of SiCp/LD2 composite, Transactions of
nonferrous metals society of China, 16(2006)818
45. J. Wang, Y.J. Li, Y.S. Yin, Microstructural characterization in diffusion bonded???????? TiC-Al2O3/
Cr18-Ni8 joint with Ti interlayer, Bulletin of Materials Science, 29(2006) 155
46. J. Wang, Y.J. Li, H.J. Ma, Y.S. Yin, Microstructure and diffusion kinetics at the bonded
Fe-16Al/Cr18-Ni8 interface, Reaction kinetics and Catalysis Letters, 87(2006) 67
47. J. Wang, Y.J. Li, H.J. Ma, Diffusion bonding of Fe-28Al (Cr) alloy with low-carbon steel in vacuum,
Vacuum, 80(2006) 426
48. J. Wang, Y.J. Li, Y.S. Yin, Microstructure of a vacuum diffusion layer in the joint of Fe-Al alloy with
low-carbon steel, Materials Science, 41 (2006) 647
49. P. Liu, Y.J. Li, H.R. Geng, J. Wang, Investigation of interfacial structure of Mg/Al vacuum
diffusion-bonded joint, Vacuum, 80 (2006) 395
50. P. Liu, Y.J. Li, H.R. Geng, J. Wang, H.J. Ma, G.L. Guo, Microstructure and phase constituents in the
interface zone of Mg/Al diffusion bonding, Metallurgical and Materials Transactions, 37B (2006)649
51. H.J. Ma, Y.J. Li, J. Wang, Analysis of the microstructure of Cr-Ni surface layers deposited on?????
Fe3Al by TIG, Materials Characterization, 57(2006):419
52. H.J. Ma, Y.J. Li, J. Wang, Y.S. Yin, Analysis of the microstructure and phase constitution of the
Fe3Al/18-8 diffusion interface after re-heating, Materials Chemistry and Physics, 100(2006)319
53. H.J. Ma, Y.J. Li, J. Wang, Y.S. Yin, Effect of heat treatment on microstructure near diffusion bonding
interface of Fe3Al/18-8 stainless steel, Materials Science and Technology, 22(2006)1
Ei 收录论文目录（不含同时被 SCI 收录的论文）
1.
潘福贞，杨华，焦金玲，魏代斌，K/Na-RE 复合变质对辊环用高速钢组织及力学性能的影响，铸
造，55(2006)164
2.
国洪轩，侯纪新，田学雷，秦敬玉，陈熙琛，金属材料在液态和液固转变过程中磁化率变化的测
量方法和装置，中国有色金属学报，16(2006)862
3.
孙建俊，田卫星，侯纪新，郑洪亮，国宏轩，陈熙琛，田学雷，不同冷却速率下包晶合金 Al3Ni
凝固组织的变化，铸造，54(2006)553
4.
胡小琳，刘相法，陈海霞，赵宝银，锶对铝硅合金中磷变质的影响，铸造，55(2006)335
5.
丁海民，刘相法，于丽娜，乔进国，Al-5Ti-1B 和 Al-P 中间合金对 Al-Si 合金的联合变质作用，铸
造，55(2006)176
6.
尹文宗，范润华，伊新兵，骆光恒，孙康宁，Al-Fe3O4 体系在机械力化学过程中的物理化学变化，
人工晶体学报，35(2006)907
7.
孙康宁，赵萍，任学华，赵太荣，李爱民，朱广楠，磷酸钙骨水泥中羟基磷灰石在碳纳米管上的
吸附生长，硅酸盐学报，34(2006)507
8.
孙昌，孙康宁，李爱民，刘爱红，刘晓飞，高强、低致密度 Ni3Al/HAP 生物陶瓷复合材料的制备
与性能研究，人工晶体学报，35(2006)743
9.
孙昌，孙康宁，候肖瑞，冷亮，刘晓飞，胡志坤，李春胜，HAP/聚酯生物复合材料的制备与吸波
特性，功能材料与器件学报，12(2006)285
10. 刘爱红，孙康宁，李爱民，魏源，孙昌，CNTs/HAp 复合材料及其动物离体组织热效应研究，功
能材料，37(2006)1322
11. 于志云，孙康宁，孙晓宁，李爱民，纳米碳管/羟基磷灰石复合材料的凝胶注模，复合材料学报，
23(2006)41
12. 刘睿，孙康宁，毕见强，残余试样对等径角挤压过程的影响，中国机械工程，17(2006)1858
13. 侯肖瑞，孙昌，冷亮，胡志坤，孙康宁，微纳米吸波材料研究状况，现代化工，26(2006)112
14. 毕见强，孙康宁，范润华，刘睿，2A12 铝块体超细晶材料的 ECAP 制备，人工晶体学报，35(2006)221
15. 毕见强，孙康宁，刘睿，王素梅，范润华，等径角挤压 Al-4.25%Cu 多晶材料的裂纹产生于扩展，
人工晶体学报，35(2006)724
16. 李爱菊，甄玉花，张继明，尹衍升，(SiC, TiB2)/B4C 复合材料的微观结构及性能，硅酸盐学报，
34(2006)10
17. 赵明，武传松，赵朋成，CTAW 熔池形状数值模拟精度的改进，焊接学报，27(2006)17
18. 陈茂爱，武传松，刘国栋，SiCp/LD2 复合材料的激光焊焊缝组织及性能，焊接学报，27(2006)51
19. Y.J. Li, J. Wang, H.J. Ma, T. Feng, A study of Interface microstructure and vacuum brazing of
aluminium plate-wing style cooler, International Journal for the Joining of Materials, 18(2006)53
20. 李亚江，刘鹏，王娟，尹衍升，夏春智，Mg/Al 异种材料脉冲 TIG 焊接头的组织结构，焊接学报，
27(2006)39
21. 李亚江，
王娟，
尹衍升，
Fe3Al 与 Q235 钢异种材料扩散焊的界面剪切强度，
材料科学与工艺，
14(2006)
131
22. 王娟，李亚江，马海军，刘鹏，Ti/Cu/Ti 复合中间层扩散连接 TiC-Al2O3/W18Cr4V 接头组织分析，
焊接学报，27(2006) 9
23. P. Liu, Y.J. Li, J. Wang, H.R. Geng, Diffusion bonding technology and Microstructure of Mg/Al
dissimilar materials, International Journal for the Joining of Materials, 18 (2006) 27
24. 马海军，李亚江，王娟，尹衍升，再加热对 Fe3Al/18-8 扩散焊界面附近组织结构的影响，焊接学
报，27(2006) 35
2005 年度
1. 边秀房、孙保安、胡丽娜、贾玉波， Fragility of superheated melts and glass-forming ability in Al-based alloys,
Physics Letters A, 2005, 335, SCI
2. 胡丽娜、边秀房、王伟民 ， Thermodynamics and dynamics of metallic glass formers: Their correlation for the
investigation on potential energy landscape. J. Phys. Chem. B. 2005, 109, SCI
3. 程素娟、边秀房、王伟民、秦绪波， Effect of copper,aluminum and tin addition on thermal contraction of
indium melt clusters, Physics B,2005, 366, SCI
4. 曲玉辉、边秀房， Structure and vibrations of AlnNn(n=3-9) clusters, Spectrochimica Acta Part A, 2005, 61,
SCI
5. 曲玉辉、边秀房，唐宏伟，司鹏超， Theoretical study of energies,structures, and vibrational spectra of the
carbonic acid-hydroperoxy radical complexes, International Journal of Quantum Chemistry,2005, 101,SCI
6. 谷廷坤、边秀房、秦敬玉、许昌业， Ab initio molecular-dynamics simulations of liquid GaSb and InSb,
Physical Review B ,2005, 71, SCI
7. 牛玉超、边秀房、王伟民、秦绪波， The order evolution in amorphous Fe 78 Si 9 B 13 ribbon during annealing
process, Materials Letters, 2005, 59,SCI
8. 边秀房、张景祥、贾玉波、孙民华， Viscosity charateristic in metallic melts with medium/short-range order
structures ， Chinese Physics Letters ， 2005 ， 22(3), SCI
9. 王丽、丛红日、张研宁， Medium-range order of liquid metal in the quenched state Physics B, 2005,355,SCI
10. 刘相法、乔进国、武玉英、刘相俊、边秀房， EPMA analysis of calcium-rich compounds in near eutectic
Al–Si alloys, Journal of Alloys and Compounds, 2005, 388, SCI
11. 刘相法、乔进国、武玉英、刘相俊、边秀房， The Nucleation sites of Primary Si in Al-Si Alloys after Addition
of Boron and Phosphorus , Journal of Alloys and Compounds, 2005, 391, SCI
12. 刘相法、于丽娜、刘建文、王振清、边秀房， A new technique to refine pure aluminum by Al–Ti–C mold,
Materials Science and Engineering A, 2005 ， A399, SCI
13. 王振清、刘相法， Reaction in the Al-ZrO 2 -C system, Journal of Materials Science , 2005 ， 40 ， SCI
14. 王振清、刘相法、边秀房， In-situ synthesis of Al/(TiC+α-Al 2 O 3 ) and Al/(TiAl 3 +TiC+α- Al 2 O 3 )
alloys by reactions between Al 、 TiO 2 and C in liquid aluminum, Journal of Materials Science , 2005 ， 40 ，
SCI
15. 潘义川、刘相法、杨华， Microstructural formation in a hypereutectic Mg-Si alloy, Materials Characterization,
2005 ， 55 ， SCI
16. 潘义川、刘相法、杨华， The role of C and Fe in grain refinement of an AZ63B magnesium alloy by Al-C
master alloy, Journal of Materials Science and Technology, 2005 ， 21(5) ， SCI
17. 于丽娜、刘相法、王振清、边秀房， Grain refinement of A356 alloy by AlTiC/AlTiB master alloys, Materials
Science and Engineering A, 2005 ， 40(14) ， SCI
18. 乔进国、刘相法、刘相俊、边秀房， Re lationship between microstructures and contents of Ca/P in
near-eutectic Al–Si piston alloys ， Materials Letters, 2005 ， 59 ( 14-15 ) , SCI
19. 赵德刚、刘相法、刘玉先、边秀房 , In-situ preparation of Al matrix composites reinforced by TiB 2 particles
and sub-micron ZrB 2 , Journal of material science, 2005, 40 (16), SCI
20. 李成栋 、 田学雷 、 陈熙琛， Crystallization Behavior of C-containing FINEM ET Amorphous Alloy
Melt-spun Ribbon ， J . Mater . Sci . Techno1 . ， 2005, 21(1) ， SCI
21. 李成栋 、 田学雷 、 陈熙琛， Crystallization behavior of co-containing FINEMET amorphous alloy
melt-spun ribbon ， Materials Letters ， 2006, 60(3), SCI
22. 孙建俊 、 田学雷 、 陈熙琛， Normal solidification of Ni-Al series binary peritectic alloys ， Special
Casting and Nonferrous Alloys, 2005, 25(3), EI
23. 郑洪亮 、 田卫星 、 孙建俊 、 詹成伟 、 田学雷 ; Overview on porosity forming mechanism of
spheroidal graphite iron ， Foundry, 2005, 54(11), EI
24. 孙建俊 、 田卫星 、 侯纪新 、 郑洪亮 、 国宏轩 、 陈熙琛 、 田学雷， Solidification of Al_3Ni
Peritectic Alloy at Different Cooling Velocity ， Foundry, 2005 , 54(6), EI
25. 赵德刚 、 刘相法 、 潘义川 、 乔进国 、 刘玉先， (ZrAl 3 +ZrB 2 )/Al 复合材料的制备和微观组
织结构 , 铸造 , 2005, 54 (6), EI
26. 武玉英 、 刘相法 、 姜炳刚 、 边秀房， Al-Si-Fe-Cu-Mg-Ni 合金中复合 Fe- Si 相的研究，铸造，
2005 ， 54(10), EI
27. 赵德刚 、 刘相法 、 边秀房 、 张永昌， TiB2/Al-Cu 复合材料的微观组织和力学性能研究 , 铸造 ,
2005 ， 54(1) ， EI
28. 赵德刚 、 孙盛睿 、 顾一嘉 、 文雯 、 刘相法 、 于彦峰， 铜合金冷却过程中的 “ 发声 ” 现象 ,
物理测试 , 2005 ， 23(1) ， EI
29. 张忠华 、 Jan Frenzel, On the reaction between NiTi melts and crucible graphite during vacuum induction
melting of NiTi shape memory alloys, Acta Materialia, 2005, 53(14), SCI
2004 年度：
1.
Hu Lina, Bian Xiu-fang. Liquid fragility- A key to going deep into materials of glassy states.
Chinese Science Bulletin,2004,49(1):
2.
1-9
Sheng-hai Wang, Xiu-fang Bian, Huan-rong-Wang. Crystallization of amorphous
Al84.2Ni10La2.1Ce2.8-Pr0.3Nd0.6 alloy.
3.
Materials letterss 58 2004:539-542
Wang, Guiqing; Bian, Xiufang; Qiao, Jinguo; Zhang, Junyan. Effect of Be on Aging Behavior
of an Al-Si-Cu-Mg Cast Alloy. Journal of Materials Engineering and Performance, v 13, n 1, February,
2004, p 99-102 (王桂青，EI)
4.
Wang, Jisen; Sun, Jinquan; Bian, Xiufang. Preparation of oriented TiO2 nanobelts by
microemulsion technique.Materials Science and Engineering A, v 379, n 1-2, Aug 15, 2004, p
7-10
（王积森，SCI, EI）
5. Wang, Yan; Zhang, Zhonghua; Wang, Weimin; Bian, Xiufang. Microstructural evolution and
microhardness of a melt-spun Al-5Ti-1B alloy during annealingMaterials Science and Engineering
A, v 366, n 1, Feb 5, 2004, p 17-24 （王艳，SCI,EI）
6. Wang, Guiqing; Bian, Xiufang; Liu, Xiangfa; Zhang, Junyan. Effect of Mg on age hardening and
precipitation behavior of an AlSiCuMg cast alloy.Journal of Materials Science, v 39, n 7, Apr
1, 2004, p 2535-253 （王桂青，SCI, EI）
7. Wang, Jisen; Bian, Xiufang; Sun, Jinquan.Transformation mechanism among various
nano-morphologies.Journal of Advanced Materials, v 36, n 4, October, 2004, p 39-42（王积森，
EI）
8. Cheng SJ, Wang ZH, Bian XF, et al. Liquid structure and viscosity of In80CU20 alloy TRANSACTIONS
OF NONFERROUS METALS SOCIETY OF CHINA 14 (1): 161-165 FEB 2004 (程素娟，SCI)
9. Zhao, Yan; Bian, Xiufang; Yin, Kuibo; Zhou, Jiankun; Zhang, Junyan; Hou, Xiaoxia. Relations
of the characteristic temperatures and fragility parameters in glass-forming metallic system .
Physica B: Condensed Matter, v 349, n 1-4, Jun 15, 2004, p 327-332（赵岩，SCI, EI）
10. Song, Xigui; Bian, Xiufang; Qi, Xiaogang; Liu, Xiangfa; Zhang, Junyan; Wang, Baopei; Zhu,
Limin. Effect of Al-P master alloy on grain refinement of primary silicon in eutectic Al-Si
alloys.Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng
Ed), v 11, n 1, February, 2004, p 81-84 （宋锡贵，SCI, EI）
11. Hu, Lina; Bian, Xiufang; Duan, Youfeng.Influence of hydrogen content on the behavior of grain
refinement in hypereutectic aluminum-silicon alloy.Journal of University of Science and
Technology Beijing: Mineral Metallurgy Materials (Eng Ed), v 11, n 2, April, 2004, p 141-146
（胡丽娜，EI）
12. Hu, Lina; Bian, Xiufang; Wang, Weimin; Zhang, Junyan; Jia, Yubo.Liquid fragility and
characteristic of the structure corresponding to the prepeak of AlNiCe amorphous alloys.Acta
Materialia, v 52, n 16, Sep 20, 2004, p 4773-4781 （胡丽娜，SCI, EI）
13. Zhou, Jiankun; Bian, Xiufang; Wang, Weimin; Xue, Xianying; Wang, Shenghai; Zhao, Yan; Yin,
Kuibo. Medium-range order and crystallization in amorphous Al-Ni-Pr alloys.Materials Letters,
v 58, n 20, August, 2004, p 2559-2563（周建坤，SCI, EI）
14. Zhang, Zhonghua; Wang, Yan; Bian, Xiufang.Microstructure selection map for rapidly solidified
Al-rich Al-Ce alloys.Journal of Crystal Growth, v 260, n 3-4, Jan 9, 2004, p 557-565（张忠华，
SCI, EI）
15. Hu LN, Bian XF, Duan YF. Hydrogen content and porosity behavior of hypereutectic
aluminum-silicon alloy with phosphorus，
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS
SCIENCE EDITION 19 (4): 65+ DEC 2004 （胡丽娜，SCI）
16. Hu LN, Bian XF, Ananda M, et al.Influence of elemental iron on hydrogen content in superheated
aluminum-iron melts JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION 19 (2):
57-61 JUN 2004 （胡丽娜，SCI）
17. Gu TK, Qin JY, Xu CY, et al. Structural, bonding, and dynamical properties of liquid Fe-Si
alloys: An ab initio molecular-dynamics simulation PHYSICAL REVIEW B 70 (14): Art. No. 144204
OCT 2004 (谷廷坤，SCI）
18. Gu TK, Qin JY, Bian XF, et al. ab initio molecular-dynamics simulation of liquid structure
change with temperature for a GaSb alloy: PHYSICAL REVIEW B 70 (14): Art. No. 245214 DEC 2004
谷廷坤， SCI）
19. Qu YH, Bian XF, Tang HW, et al. Ab initio calculation of hydrogen bonding between hydrogen
fluoride molecule and hydroperoxy radical: HF center dot HO2JOURNAL OF MOLECULAR
STRUCTURE-THEOCHEM 671 (1-3): 173-177 FEB 23 2004 （曲玉辉，SCI，有抽本）
20. Qu YH, Bian XF. Structures and stabilities of Al3B isomers. JOURNAL OF MOLECULAR STRUCTURETHEOCHEM 677 (1-3): 91-95 MAY 31 2004 （曲玉辉，SCI，有抽本）
21. Chen, Ying; Bian, Xiufang; Zhang, Jingxiang; Zhang, Yanning; Wang, Li. Structure and dynamics
of gold nanocluster under cooling conditions. Modelling and Simulation in Materials Science and
Engineering, v 12, n 3, May, 2004, p 373-379 （陈莹，SCI,EI，有抽本）
22. Xiangfa Liu, Zhenqing Wang; Xiufang Bian. Monoclinic to cubic phase transformation of ZrO2
induced by ball milling, Journal of Materials Science, 2004; 39 (7): 2585-2587（刘相法, SCI）
23. Wang Zhenqing,Liu Xiangfa, Bian Xiufang. Reaction in the Al-TiO2-CB4 System and in Situ
Synthesis of an Al/(TiC+TiB2+a-Al2O3) Composite. Advanced Engineering Materials,2004; 6(12):
276-281（王振卿, SCI）
24. Wang Zhenqing, Liu Xiangfa, Zhang Junyan and Bian Xiufang. The Reaction Mechanism in Al-C
Binary System Through DSC and XRD,Journal of Materials Science,2004;39(6): 2179-2181（王振卿,
SCI）
25. Wang Zhenqing, Liu Xiangfa and Bian Xiufang. Reaction mechanism in an Al-TiO2-C system for
producing in-situ Al/(TiC+Al2O3) composite, Journal of Materials Science 2004;39（2）：663-666
（王振卿, SCI）
26. Liu Yanhui, Liu Xiangfa,Bian Xiufang.Grain refinement of Mg-Al alloys with Al4C3-SiC/Al master
alloy, Materials Letters,2004;58( 7-8):1282-1287（柳延辉，SCI）
27. 刘相法，乔进国，张希华，刘相俊，边秀房.共晶型 Al-Si 合金中 (Can-x,Na x) Pm 化合物的形成与 P
变质失效分析，金属学报，2004；40（3）：245-250 （SCI、EI 收录）
28. 刘相法，乔进国，刘玉先，李士同，边秀房. Al-P 中间合金对共晶和过共晶 Al-Si 合金的变质行为，
金属学报，2004；40（5）：471-476 （SCI、EI 收录）
29. 刘相法，乔进国，王振卿，于丽娜，韩延峰，边秀房. Al-8Ti-2C 对 Al-P 中间合金变质效果的促进作
用，稀有金属材料科学与工艺，2004；33（9）：924-927 （SCI、EI 收录）
30. 赵德刚，刘相法，边秀房，刘相俊，张永昌. （Al2O3+TiB2）/ZL102 复合材料的制备和力学性能，中
国有色金属学报, 2004; 14（10）：1723-1728（EI 收录）
31. 乔进国, 刘相法, 冯增建, 孙晓，高晓波，边秀房. Al-5%Ti-0.25%C 对 Al-Si 活塞合金组织和性能的
影响，铸造，2004; 53（10）：784-787（EI 收录）
32. 乔进国, 刘相法, 刘相俊, 张永昌，边秀房. Mg 对 P 变质共晶 Al-Si 合金的影响，铸造, 2004, 53（9）：
739（EI 收录）
32. 乔进国, 刘相法, 刘相俊, 张永昌，边秀房. Mg 对 P 变质共晶 Al-Si 合金的影响，铸造, 2004, 53（9）：
739（EI 收录）
33. 武玉英，刘相法，刘相俊，边秀房. Cu-16%Sn-8%P 合金的球状 Cu3P 与热处理特性，铸造, 2004；53
（5）: 354～357（EI 收录）
34. 乔进国, 刘相法, 刘相俊, 边秀房. Ca 对共晶 Al-Si 合金磷变质效果的影响，铸造，2004; 53（1）：
38-40（EI 收录）
35. 赵德刚, 刘相法，边秀房. (TiB2+SiC)ZL109 复合材料的制备及其力学性能，铸造，2004; 53（2）：
97-100（EI 收录）
36. Wang L, et al.,, Discontinuous structural phase transition of liquid metal and alloys (1),
Physics Letters A, 04,5 (326 (2004): 429-435), , 1.483 , (王丽, SCI)
37. Wang L, et al.,, Discontinuous structural phase transition of liquid metal and alloys (2),
Physics Letters A , 04,6 (328 (2004): 241-245), , 1.483, (王丽, SCI)
38. Wang L, et al.,, The structure and transport property of liquid Al with different EAM model,
Physica B, 2004, (351 (2004) 208-212), , 0.609, (王丽, SCI)
39. Zhang Yanning; Wang Li; Wang Weimin; Liu Xiangfa; Tian Xuelei; Zhang Peng, Pressure effect
on the structural transition of liquid Au, Physics Letters A, Volume: 320, Issue: 5-6, pp. 452-458,
January 12, 2004
40. Wang W. M., Y. C. Niu, J. H. Chen, et al., Monte-carlo simulation of the dynamic evolution
of binary lamellar eutectic in directional solidification, Chinese Physics. 13（09）:1520-1526,
2004（王伟民，SCI）
41. Wang W. M., Hu X. P., Zhang Y. N., Bian X. F., Liu J. M., Effect of element bonding energy
on the microstructure in the growth of eutectic alloys, Computational Materials Science，Volume:
29, Issue: 2, pp. 214-220, February, 2004（王伟民，SCI）
42. Niu Y.C., Bian X.F., Wang W.M.,Origin of ductile-brittle transition of amorphous Fe78Si9B13
ribbon during low temperature annealing, Journal of Non-Crystalline Solids, Volume: 341, Issue:
1-3, pp. 40-45, August 1, 2004 （牛玉超，SCI）
43. 陈建奇，王伟民，张良，边秀房，二元非晶合金初晶晶化的 Monte Carlo 模拟，金属学报,40(7): 741-744，
2004（陈建奇，SCI）
44. Hou Xiaoxia, Yang Hua, Zhao Yan, Pan Fuzhen，(2). Effect of Si on the interaction between
die casting die and aluminum alloy，Materials Letters Volume: 58, Issue: 27-28, November, 2004,
pp. 3424-3427，Received 16 January 2004; accepted 18 June 2004 Available online 9 August 2004.
45. 侯晓霞：不同加硅量及 K/Na、Mo 复合变质对 H13 钢组织与性能的影响，铸造， 2004 年 09 期（EI）
46. Qin, Jingyu; Gu, Tingkun; Tian, Xuelei; Bian, Xiufang. Study of the structure of molten Fe-Si
alloys by X-ray diffraction. Jinshu Xuebao/Acta Metallurgica Sinica, v 40, n 7, July, 2004, p
689-693 （秦敬玉，SCI、EI 收录）
47. Qin, Jing-Yu; Qin, Xu-Bo; Wang, Wei-Min; Bian, Xiu-Fang. Model on medium range order in liquid
Al-Fe alloys. Transactions of Nonferrous Metals Society of China (English Edition), v 14, n 6,
December, 2004, p 1068-1073（秦敬玉，SCI、EI 收录）
48. Qin JY, Gu TK, Tian XL, et al. Study of the structure of molten Fe-Si alloys JOURNAL OF
PHYSICS-CONDENSED MATTER 16 (28): 4753-4760 JUL 21 2004 （秦敬玉，SCI 收录）
49. Cui, Feng (Sch. of Mat. Sci. and Eng., Ji'nan Univ.); Geng, Haoran; Qian, Baoguang; Tian,
Xianfa; Yu, KeIn-situ processing and properties of TiB2/ZA27 composites.Fuhe Cailiao Xuebao/Acta
Materiae Compositae Sinica, v 21, n 4, August, 2004, p 87-91 Language: Chinese （崔峰，EI）
50. Tao, Zhendong; Geng, Haoran; Yu, Ke; Yang, Zhongxi; Wang, Yingzi. Effects of high-energy ball
milling on the morphology and the field emission property of multi-walled carbon
nanotubes.Materials Letters, v 58, n 27-28, November, 2004, p 3410-3413（陶珍东，EI）
51. Qian, Bao-Guang; Geng, Hao-Ran; Tao, Zhen-Dong; Zhao, Peng; Tian, Xian-Fa. Effects of Ca
addition on microstructure and properties of AZ63 magnesium alloy. Transactions of Nonferrous
Metals Society of China (English Edition), v 14, n 5, October, 2004, p 987-991 (钱宝光，EI)
52. Wang, Xubo; Tian, Xuelei; Sun, Jianjun; Tian, Weixing; Zheng, Hongliang. Computer aided
simulated calculation speed for 3-D filling process of the castings.Tezhong Zhuzao Ji Youse
Hejin/Special Casting and Nonferrous Alloys, n 5, September, 2004, p 18 Language: Chinese（王
旭波，EI）
53 亓效刚，李华宾，刘峰，陈俊华.熔体热处理对 Zn-Al 系及 ZAS35 合金组织与性能的影响，金属热处理，
2004，29(10):40-43
54 C.S.Wu, M.A.Chen, S.K.Li, Analysis of excited droplet oscillation and detachment in active
control of metal transfer，Computational Materials Science, Volume: 31，Issue: 2，pp. 147-154，
Feb.1, 2004. （武传松，SCI 收录）
55 C. S. Wu, J. S. Sun and Y M Zhang,Numerical simulation of dynamic development of keyhole in
double-sided arc welding, Modelling Simul. Mater. Sci. Eng.，Volume: 12，Issue: 2，pp. 423-442，
Feb.1, 2004. （武传松，SCI 收录）
56 Chuan Song Wu and Fengjie Yan,Numerical simulation of transient development and diminution
of weld pool in gas tungsten arc welding, Modelling Simul. Mater. Sci. Eng.，Volume: 12，Issue:
1，pp. 13-20，Jan.1, 2004. （武传松，SCI 收录）12(2004) 13-20PII:S0965-0393(04)67061-6
57 P C Zhao, C S Wu and Y M Zhang, Numerical simulation of the dynamic characteristics of weld
pool geometry with step-changes of welding parameters, Modelling Simul. Mater. Sci. Eng., Volume:
12，Issue: 4，pp. 765-780，April 1, 2004. （武传松，SCI 收录）
58 Li Yajiang, Wang Juan, Shen Xiaoqin. FEM calculation and effect of diffusion hydrogen
distribution in the fusion zone of super-high strength steel, Computational Materials Science,
volume: 31. Issue: 2. pp. 57-66, February. 2004 (李亚江, SCI、EI 收录)
59 Li Yajiang, Wang Juan, Chen Maoai, Shen Xiaoqin. Finite element analysis of residual stress
in the welded zone of a high strength steel, Bulletin of Materials Science, volume: 27. Issue:
2. pp. 127-132, April. 2004 (李亚江, SCI、EI 收录)
60 Li Yajiang, Shen Xiaoqi, Feng Tao, Ren Jiangwei. Effect of diffusion hydrogen distribution
in the fusion zone on welding crack for HQ130 high strength steel, International Journal for the
Joining of Materials, Volume: 16. Issue: 1. pp. 21-27, March. 2004 (李亚江, EI 收录)
61 Li Yajiang, Wang Juan, holly Xiao. Microstructure, Fracture and TEM analysis in the HAZ of
HQ130 high strength steel, International Journal for the Joining of Materials, Volume: 16. Issue:
2. pp. 56-60, June. 2004 (李亚江, EI 收录)
62 李亚江，王娟. Fe3Al/18-8 异种材料真空扩散焊工艺研究, 材料科学与工艺, Volume: 12. Issue: 1.
pp. 45-48, Feburary. 2004 (李亚江, EI 收录)
63 Li Yajiang, Wang Juan, Yin Yansheng, Ma Haijun. Technology and interface structure for diffusion
bonding of Fe3Al/18-8 dissimilar materials, Materials Science and Technology, Volume: 20. Issue:
1. pp. 1484-1488, Feburary. 2004 (李亚江, SCI、EI 收录)
64 Li Yajiang, Wang Juan, holly Xiao. TEM observation for the heated-affected zone of HQ130
super-high strength steel, , International Journal for the Joining of Materials, Volume: 16. Issue:
4. pp. 121-125, December. 2004 (李亚江, EI 收录)
65 Wang Juan, Li Yajiang, Liu Peng, Wu Huiqiang. Microstructure and performance in
diffusion-welded joints of Fe3Al/Q235 carbon steel, Journal of Materials Processing Technology,
Volume: 145. Issue: 3. pp. 294-298, March. 2004 (王娟, SCI、EI 收录)
66 Wang Juan, Li Yajiang, Liu Peng. Vacuum diffusion welding technology of Fe3Al and Q235 steel
dissimilar Materials, International Journal for the Joining of Materials, Volume: 16. Issue: 3.
pp. 86-90, September. 2004 (王娟, EI 收录)
67 王娟，李亚江, 马海军，刘鹏. Fe3Al/18-8 扩散焊接头的组织特征分析, 焊接学报, Volume: 25. Issue:
6. pp. 19-22, December. 2004 (王娟, EI 收录)
68 刘鹏，李亚江,王娟，耿浩然. Mg/Al 异种材料真空扩散焊界面区域的显微组织, 焊接学报, Volume: 25.
Issue: 5. pp. 5-8, October. 2004 (刘鹏, EI 收录)
69 陈茂爱，武传松，杨敏等，Ti-V-Nb 微合金钢第二相粒子在焊接热循环过程中的变化规律，金属学报，
Volume: 40，Issue: 2，pp. 148-154，Feb.1, 2004. （陈茂爱，SCI、EI 收录）
70 陈茂爱，武传松，廉荣等，GMAW 焊接熔滴过渡动态过程的数值模拟，金属学报，Volume: 40，Issue: 11，
pp. 1227-1232， Nov.1, 2004. （陈茂爱，SCI、EI 收录）
71 李士凯，陈茂爱，武传松等，脉冲 GMAW 熔滴过渡动态过程的解析模型，焊接学报，Volume: 25，Issue:
2，pp. 47-51， Feb.1, 2004. （陈茂爱，EI 收录）
72 Sun Kang-ning, Li Ai-min, Dong Wei-fang, Yin Yan-sheng, Liu Jun-Hong. Study of the preparation
and mechanism of producing pores on tiny porous HAp-ZrO2 biocomposite, Journal of Synthetic
Crystals, 33(4) 2004:567 (EI, 孙康宁)
73 Sun Kang-ning, Pang lai-xue, Yin Yan-sheng. Relationship of valence electron structure and
mechanical properties on Fe3Al after order degree intercepted, Journal of Synthetic Crystals,
33(4) 2004:575 (EI, 孙康宁)
74 Li Ai-min, Sun Kang-ning, Dong Wei-fang, Yin Yan-sheng, Wang Xin. Influence of sintering
technique on mechanical properties and microstructure of CNTs/HAp composite, Journal of Synthetic
Crystals, 33(4) 2004:624 ( EI, 李爱民,孙康宁)
75 李爱民,孙康宁,尹衍升，于志云，卢志华,毕见强. 碳纳米管/羟基磷灰石复合材料的力学性能与微观结
构 , 复合材料学报 2004，21（5）98-102 ( EI)
76 孙康宁, 李爱民,尹衍升,于志云. 碳纳米管/羟基磷灰石复合材料的制备研究, 中国生物医学工程学报
2004, 23(6).573-578(EI)
77 庞来学,孙康宁,孙家涛,李明.Fe3Al 金属间化合物的价电子结构与其力学性能的关系, 材料热处理学
报.2004,25(2).-64-67 (EI)
78 赵萍,孙康宁,李江田. 固态相变热压烧结制备 Ti3Al/TiC+Al2O3 陶瓷复合材料, 材料热处理学报
2004,25(1): 12-14 (EI)
79 Li Ai-min, Sun Kang-ning. Mechanical Properties, Microstructure and Histocompatibility of
CNTs/Hap Biocomposites, The First China U.S. Symposium on Nanoscale Science and Technology,
Beijing，China , May17-19，2004 (ISTP)
80 张玉军, 尹衍升. Eu2+,Dy3+共激活铝酸锶发光材料长余辉发光机理探讨, 人工晶体学报, 2004, 33(1)
67-70
81 Yujun Zhang, A.Quaranta, G.D.Soraru. Synthesis and Luminescent Properties of novel Eu2+-doped
Silicon Carbide Glasses,Optical Materials, 24(2004)601-605
82 李爱菊，尹衍升，甄玉花等. (SiC,TiB2)/B4C 复合材料的烧结机理. 复合材料学报，2004,
Vol.21(4):129~133
83 范润华,尹衍升,孙家涛,王昕,陈守刚. 铁铝化合物/碳化钛复合材料的界面电子结构，自然科学进展，
2004,14(3):307-311
84 范润华,陈云,张景德,尹衍升. 球磨合成 Fe3Al 金属间化合物及其固相反应机理，功能材料，
2004,35(4)442-444(EI)
85 孙家涛,范润华,刘冰,陈云,尹衍升. 碳化物价电子结构及其界面电子密度分析, 人工晶体学报,
2004,(3)316(EI)
86 Hongyu Gong, Yansheng Yin, Xin Wang, Yingcai Liu. Fabrication and microstructure of in situ
toughened Al2O3/Fe3Al. Materials Research Bulletin,2004,39: 513-521 (龚红宇, SCI,EI)
87 李嘉,尹衍升，谭训彦. ZrO2(3Y)/Fe3Al 复合材料的显微结构及性能 , 无机材料学报 , 2004 19(1):
189-195(EI)
88 李嘉,尹衍升，刘强，孙康宁. 压痕-淬冷技术表征氧化锆/铁铝复合材料的抗热震性能.复合材料学报,
2004,21(4): 104-109
89 周春华,尹衍升,师瑞霞,陈守钢. 超细 Fe3Al 粉末表面处理偶联剂的用量及其作用机理.化工学报 55(6)
2004: 998-1001
90 师瑞霞,尹衍升,马来鹏.Co 包覆 Al2O3/TiCp 复相陶瓷抗热震性能及显微结构.
材料热处理学报 , 2004,
25(2):56-59
91 谭训彦, 尹衍升, 李嘉, 郝艳霞, 王昕. Fe-Al/ZrO2 复合粉体的均匀分散. 硅酸盐学报, 2004, 32(7):
827-831(EI)
92 李静，尹衍升，马洪涛. Fe3Al 基摩擦材料的结构与摩擦磨损性能
, 材料工程 2004（8）:3-6, EI
93 李静，尹衍升，马洪涛. 热压烧结 Fe3Al 基金属间化合物的结构和摩擦学特性
, 润滑与密封 2004
（6）:27-29(EI)
94 马洪涛，
尹衍升，
李静，
朱海涛. Fe3Al 基复合材料的制备及其摩擦磨损行为
, 润滑与密封 2004（6）
:4-7
(EI)
95 Zhen Yuhua, Li Aiju, Yin Yansheng, et al. Reactive and dense sintering of reinforced-toughened
B4C matrix composites. Materials Research Bulletin, 39(2004):1615-1625.(甄玉花，李爱菊，尹衍
升等，EI、SCI 收录)
96 Chen, Shougang; Yin, Yansheng, Reduced activation energy and crystalline size for
yttria-stabilized zirconia nano-crystals: An experimental and theoretical study, Journal of
Crystal Growth267(1-2)2004:100-109(陈守刚,尹衍升,SCI,EI)
97 Chen, Shougang; Yin, Yansheng, Approximation of the interaction of oxygen and nitrogen with
Pd and Ni surfaces using the Morse potential, Vacuum, 72( 4) 2004:393-403, (陈守刚尹衍升)SCI
98 Chen, Shougang; Wang Daoping, Yin, Yansheng. Experimental and theoretical investigation on
the correlation between aqueous precursors structure and crystalline phase of zirconia, Journal
of molecular structure 690(2004) 181-187, (陈守刚,尹衍升) SCI,EI
99 张银燕, 尹衍升,纳米 Fe3O4 磁性液体稳定性的研究.化学物理学报, 17 (1): 83-86 FEB 2004
100 刘强, 尹衍升, 李嘉, 张景德. Fe3Al 增韧 3Y-TZP 基复合材料抗热震性能研究,材料热处理学报，
2004,24(5):15
101 Yin, YS; Zhang, JD; Li, J; Chen, Y, Mechanical properties of Fe3Al/Al2O3 composite graded
coatings, APPLIED SURFACE SCIENCE, 221 (1-4): 384-391 JAN 15 2004
102 尹衍升. 李静. 马洪涛.烧结 Fe_3Al 金属间化合物基摩擦材料的摩擦磨损性能研究，摩擦学学报，
2004， 24(5):457-461.
103 尹衍升, 张金升, 张银燕, 马来鹏, 庞来学. 纳米磁流体密封结构的设计和制造，机械工程学报，
2004, 40（4）：103-107
104 Yin, Yansheng; Gong, H.; Liu, J.; Tan, X.; Zhang, J. Advances in research on Fe-Al/Al2O3
composites. InterCeram: International Ceramic Review, v 53, n 3, May, 2004, p 162-164
105 Yin, Yansheng; Shi, R.X.; Ma, L.P. Sintering and Mechanical Properties of Al2O3/TiCp
Composites. InterCeram: International Ceramic Review, v 53, n 1, January, 2004, p 24-27
106 Yin, Y.; Gong, H.; Li, J.; Zhang, J. Dislocation morphology of Al2O3/Fe3Al nano/micro
composites. InterCeram: International Ceramic Review, v 53, n 6, November, 2004, p 406-407
2002 年度
1. Ti-Al/TiC 复合材料及显微结构分析 卢志华，孙康宁等 稀有金属材料与工程 2002，31，增 1 核心 a
2. 羟基磷灰石生物陶瓷的发展展望 李爱民，孙康宁等 稀有金属材料与工程 2002，31，增 1 核心 a
3. ZTA 纳米复相陶瓷的研究 单妍，王昕，尹衍升，孙康宁 硅酸盐通报 2002（2）：43－46 核心 a
4. Al2O3 纤维增强钛酸铝陶瓷 李传校，张玉军尹衍升等 现代技术陶瓷 2002，23（2）：3－6 一般 a
5. TiC 与 TiC－WC 的添加剂对 FeAl/ Al2O3 复合材料力学性能的影响 李传校，张玉军尹衍升等 理化检验
－物理分册 2002，32（3）：287－293 核心 a
6. 智能材料应用综述 张金升，尹衍升 山东大学学报 2002，32（3）：294－300 核心 a
7. 涂层层数和保温时间对纳米 TiO2 薄膜显微结构的影响 尹衍升，张金升，李嘉等 中国有色金属学报
2002，5：151－155 核心 a
8. 建材研究的新热点－黄河淤泥沙综合利用进展及前景展望 张金升，李嘉，尹衍升等 材料导报 2002（3）：
1－3 核心 a
9. 纳米材料和技术与发展新型建材 张金升，尹衍升，李嘉 中国建材装备 2002，2：41－43 一般 a
10. 智能材料在建筑中的应用 张金升，张虹，尹衍升 中国建材 2002，1：60－62 一般 a
11. 新型半陶瓷材料－金属间化合物及其应用 尹衍升，张金升，李嘉 中国陶瓷 2002，1：39－42 核心 a
12. 纳米 TiO2 薄膜中锐钛矿晶形稳定性研究 张金升，尹衍升，李嘉等 陶瓷学报 2002，4 一般 a
13. α－Al2O3 的晶体结构与价电子结构 谭训彦，王昕，尹衍升 中国有色金属学报 2002，s1(5 月份)，论
文集 核心 a
14. 合成氨中置锅炉应力腐蚀开裂原因分析及预防 李爱菊等 山东大学学报（工学版） 2002（2）：185－
189 核心 a
15. 超期服役铁路罐车灌体的剩余寿命评估 李爱菊等 山东大学学报（工学版） 2002（3）：280－286 核
心a
16. Reaction sintering fabrication of (AlN,TiN) Al2O3 Hongyu GONG Material Rearch Bulletin
2002,37,1603-1611 国外刊物 a
17. The poorness of alloy element and analysis of electron theory in high temperature aged 12Cr/MoV steel matrix
Yang Ruicheng,Shi Ruixia Journal of Gansu University of Technology 2002, Supplement 国内 a
18. 察尔汗盐湖镁资源的开发与展望 尹衍升，师瑞霞，李嘉等 材料导报 2002，10 核心 a
19. WC/钢复合材料奥氏体化后的硬化效应及微观机理 杨瑞成，师瑞霞等 复合材料学报 2002，19（2） 核
心a
20. 氧化铝纳米复合材料的研究进展 龚红宇 山东大学学报（工学版） 2002，32（4） 核心 a
21. 微乳液技术在纳米离子制备中的应用 陈守刚，尹衍升 现代化工 2002，22（10）：59－61 核心 a
22. 氮原子在 Ni 平坦和缺陷表面上的吸附和振动 陈守刚，王道平，王泽新，尹衍升 催化学报 2002，23
（1）：59－64 核心 a
23. Fe3Al/Al2O3 陶瓷复合材料承载条件下的声学特征 张景德，孙康宁，尹衍升 山东大学学报（工学版）
2002，2 核心 a
24. 新材料研究发展战略 李赛强，张景德 科学与管理 2002，2 一般 b
25. 涂层材料的应用与发展， 张景德，尹衍升等 机械工程材料 2002，11 核心 a
26. 等离子喷涂 Fe3Al-Al2O3 陶瓷梯度涂层 张景德，尹衍升等 机械工程材料 2002，12 核心 a
27. 基体表面状态对涂层性能的影响， 张景德，尹衍升等 山东大学学报（工学版） 2002，6 核心 a
28. 纳米陶瓷研究进展 李嘉，尹衍升等 济南大学学报（自然科学版） 2002，1 一般 a
29. Ultrasonic analysis of cracking propagation morphology in the fusion zone of high strength steel 李亚江、邹增
大等 Journal of Materials Science and Technology 2002，18(1)： 21~23 核心 a
30. Oxidation resistance and phase constituents in the brazing interface of WC-TiC-Co hard alloys 李亚江、邹增
大等 Journal of Materials Processing Technology 2002, 122: 51~55 国外 a
31. Fe3Al/Q235 异种材料扩散焊界面相结构分析 李亚江、王娟、吴会强等 焊接学报 2002, 23 (2)：25~28 核
心a
32. Analysis microstructure of weld metal for HQ130+QJ63 high strength steel 王娟，李亚江等 Journal of Iron
and Steel Research 2002, 9 (1): 50~54 国外 a
33 Microstructure and XRD analysis in the brazing zone of a new WC-TiC-Co hard alloy 李亚江、邹增大、
Holly Xiao、王娟 Materials Research Bulletin 2002, 37 (5): 941~948 国外 a
34 Microstructure characteristics in the vacuum brazing joint of 0Cr17Ni12Mo2 stainless steel 李亚江等
International Journal for the Joining of Materials 2002, 14 (1/2): 12~15 国外 a
35 XRD and TEM analysis of microstructure in the welding zone of 9Cr-1Mo-V-Nb heat-resisting steel 李亚江、
王娟、周冰等 Bulletin of Materials Science 2002, 25 (3): 213~217 国外 a
36 Microstructure and fracture morphology in the welding zone of T91 heat-resisting steel used in power station
李亚江、王娟、周冰等 Journal of Materials Science and Technology 2002, 18 (5): 427~430 核心 a
37 高强钢焊接区拘束应力的有限元分析 李亚江、沈孝芹等 焊接学报 2002, 23 (5): 57~60 核心 a
38 TEM observation and fracture morphology in the CGHAZ of a new 0Cr18Mo2Ti ferritic stainless steel 李亚
江、张永兰、孙宾、王娟 Bulletin of Materials Science 2002, 25 (5): 361~366 国外 a
39 Micro-image analysis in the diffusion -bonded zone of Fe3Al/Q235 carbon steel dissimilar materials 王娟，李
亚江等 Bulletin of Materials Science 2002, 25 (5): 367~370 国外 a
40 A study on microstructure in the brazing interface of WC-TiC-Co hard alloys 李亚江、邹增大等 International
Journal of Refractory Metals and Hard Materials 2002, 20 (3): 169~173 国外 a
41 新型不锈钢热交换器真空钎焊接头的组织分析 冯涛，李亚江等 焊接技术 2002, 31 (5): 16~17 核心 a
42 Microstructure characteristics in the interface zone of Ti/Al diffusion bonding 任江伟，李亚江等 Materials
Letter 002, 56 (5): 647~652 国外 a
43 双面电弧焊接的传热模型 孙俊生、武传松 物理学报 2002，51（2）：286-290 核心 a
44 The effect of welding heat input on the weldpool behavior in MIG welding Sun Junsheng, Wu Chuansong
Science in China (Series E) 2002,45(3):291-299 核心 a
45 焊接热输入对 MIG 焊接熔池行为的影响 孙俊生、武传松 中国科学（E 辑） 2002，32（4）：465-471 核
心a
46 基于数值模拟的 GMAW 焊接熔深控制模型 张建纲、孙俊生、张敏 山东大学学报（工学板） 2002，
32（3）：232-235 核心 a
47 Kohonen 神经网络在熔化极气体保护焊接质量监测中的应用 胡庆贤、武传松、孙俊生 无损检测 2002，
24（4）：159-161 核心 a
48 Analysis of the Heat Flux Distribution at the Anode of a TIG Welding Arc C.S. Wu，J.Q. Gao Computational
Materials Science 2002, Vol.24, 323-327 国外 a
49 Numerical Analysis of Temperature Field During Double-Sided Arc Welding of Thick Materials C.S. Wu，J.S.
Sun Computational Materials Science 2002, Vol.25, 457-468. 国外 a
50 Extracting Weld Penetration Information in Tungsten-Inert Gas Welding J.Q. Gao，C.S. Wu Proc Instn Mech
Engrs, Part B: Journal of Engineering Manufacture 2002, Vol.216, 207-214 国外 a
51 Numerical Simulation of the TIG Welding Arc Behavior C.S.Wu，J.Q.Gao Journal of Materials Science and
Technology 2002, Vol.18(1), 43-46 核心 a
52 T.Polte and D Rehfeldt. GMAW 焊接过程监测神经网络系统 武传松 机械工程学报 2002, vol.38(1),
131-134. 核心 a
53 Kinetic Model of TiN Particle Disssolution and Coarsening during Welding Thermal Cycle M.A.Chen, C.S.
Wu， J.Q.Gao and T.Y.Ming Journal of Materials Science and Technology 2002, Vol.18(5), 439-442 国外 a
54 Welding of SiC Particle Reinforced 6061 Al Matrix Composite with Pulsed TIG. Transactions of Nonferrous
M.A.Chen, C.S. Wu and J.Q.Gao Metals Society of China 2002, Vol.12(5), 805-810 核心 a
55 TIG 焊接熔透信息的提取,. 高进强，武传松，刘新峰 中国有色金属学报 2002，Vol.12(1)：18-24 核心
a
56 含 Ti 微合金钢中的第二相粒子对焊接粗晶热影响区组织及韧性的影响 陈茂爱 武传松等 焊接学报
2002，23(3)：37-40 核心 a
57 Influence of nickel and copper on liquid structure of CuAlNi shape memory alloys Pan Xuemin, Bian Xiufang
Chinese Science Bulletin 2002; 47(1): 85-88 核心 a
58 Medium-range order clusters in metal melts Bian Xiufang, Pan Xuemin, Qin Xubo, Jiang Minhua Science in
China 2002; 45(2): 113-119 核心 a
59 In situ TiB2 particulate reinforced near eutectic Al-Si alloy composites Han Yanfeng, Liu Xiangfa, Bian
Xiufang Composites Part A- Applied Science and Manufacturing 2002; 33 (3): 439-444. 国外 a
60 液态 Al80Fe20 合金中的中程有序结构 丛红日，边秀房，李辉，王丽 物理化学学报 2002；18（1）：
39-44 核心 a
61 Structure properties of Cu-Ni alloys at the rapid cooling rate using embedded-atom method Hong-Ri Cong,
Xiu-Fang Bian, Jing-Xiang Zhang, Hui Li Materials Science and Engineering A 2002；326：343-347 国外 a
62 Ni3Al 合金液态与非晶中的原子团蔟 王丽，衣粟，边秀房 物理化学学报 2002；18 （4）：297-301 核
心a
63 Cu3Au 合金熔体的中程有序结构 丛红日，边秀房，李辉 无机化学学报 2002；18（5）：455-459 核心
a
64 Short-range structural change in indium melt by Guassian peaks decomposing of RDF Sujuan Cheng, Xiufang
Bian, Xubo Qin J.of Mineral Metallurgy Materials 2002; 9(2): 85-89 国外 a
65 Microstructure of liquid CuAlNi shape memory alloy Pan Xuemin, Bian Xiufang, Wangli Acta Phys.Chim.Sin
2002; 18(6): 508-512 国外 a
66 Structural simulation of clusters in liquid Ni50Al50 alloys Li Wang, Xiufang Bian and Jingxiang Zhang
Modelling Simul.Mater.Sci.Eng 2002; 10: 331-339 国外 a
67 Influence of plasma arc melting on melt structure and solidification microstructure of Al-16 wt.% Si alloy Pan
Xuemin, Bian Xiufang Zhao Cheng and Sun Jingqin Materials Science Forum 396-402 (2002) 119-124 国外 a
68 Interaction between rare earth and hydrogen in eutectic Al-Cu melt Qin Xubo, Bian Xiufang Materials Science
Forum 396-402 (2002) 173-178 国外 a
69 Mechanics and dynamics research of the aluminum melt purification by FI process Hu Lina, Bian Xiufang,
Duan Youfeng Materials Science Forum 396-402 (2002) 221-226 国外 a
70 ,Microstructures and modification performance of Al-10Sr alloy prepared by molten salts electrolysis and direct
mixing process Zhonghua Zhang, Xiufang Bian, Yan Wang Materials Science Forum 396-402 (2002) 227-232 国
外a
71 Local structure of Al-Sr modifier in liquid Al-Si alloys Chen Ying, Bian Xiufang, Li Xizhen, Sun Minhua
Materials Science Forum 396-402 (2002) 753-756 国外 a
72 As-cast ageing of aluminum alloys Bian Xiufang, Wang Guiqing, Zhang Junyan, Wang Shenhai Materials
Science Forum 396-402 (2002) 863-868 国外 a
73 氮气和熔剂联合净化铝熔体 段佑锋，胡丽娜，边秀房，孙民华 中国有色金属学报 2002;12(5): 218-221
核心 a
74 Al-TM 合金熔体的中程有序结构及其演化规律 边秀房，王伟民，潘学民，秦绪波 化学学报 2002;
60(7): 1215-1219 核心 a
75 A model of viscosity for liquid metals S. Morioka, Bian Xiufang, Sun Minhua Zeitschrift fur Metallkunde
2002;93(3):288-292 国外 a
76 Microstructures and grain refinment performance of rapidly solidified Al-Ti-C master alloys Zhonghua Zhang,
Xiufang Bian, Zhenqing Wang, Xiangfa Liu, Yan Wang Journal of Alloys and Compouds 2002;339:180-188 国
外a
77 Variation of activation energy in Al-Ni-based alloy melts Bian Xiufang, Sun Minhua, Wulei, Cheng Sujuan
Materials Research Bulletin 2002;37:1451-1458 国外 a
78 Effect of quenching rate on the microstructure of rapidly solidified Al-Sr alloys Zhonghua Zhang, Xiufang Bian,
Wang Yan Zeitschrift fur Metallkunde 2002; 93(6): 585-589 国外 a
79 Microstructural characterization and microhardness of rapidly solidified Al-Ce alloys Zhonghua Zhang,
Xiufang Bian, Wang Yan Zeitschrift fur Metallkunde 2002; 93(6): 578-584 国外 a
80 Growth of dendrites in a rapidly solidified Al-23Sr alloy Zhonghua Zhang, Xiufang Bian, Yan Wang, Journal
of Crystal Growth 2002; 243 (3-4) : 531-538. 国外 a
81 Structural simulation of amorphization and crystallization in liquid metals Li Wang, Xiufang Bian, Jingxiang
Zhang J. Phys. B: At. Mol. Opt. Phys 2002;35(28 August)：3575-3582 国外 a
82 Short-range structural change in indium melt by Gaussian peaks decomposing Sujuan Cheng, Xiufang Bian,
Xubo Qin, Xuemin Pan, and Zhonghua, Wang Journal of University of Science and Technology Beijing 2002; 9(2):
85-88 国内 a
83 Thermal contraction phenomenon of cluster structure of indium melt Cheng Su-juan, Qin Xu-bo, Bian Xiufang,
Sun Min-hua, Wang Zhong-hua Tran. Nonferrous Met.Soc.China 2002; 12(3): 494-497 国内 a
84 Correlation between liquid structureand r2-phase precipitation of Cu-Al-Ni shape memory alloys. PAN
Xue-min, BIAN Xiu-fang , SUN Jing-qin, WANG Wei-min Trans. Nonferrous Met. Soc. China Oct.2002; 12 (5):
829-832 国内 a
85 Atomic simulation of amorphization ang crystallization of Ag50Au50 alloy during rapid solidification. WANG
Li, YANG Hua, ZHANG Jun-yan, BIAN Xiu-fang, YI Su. Trans. Nonferrous Met. Soc. China Oct.2002 ; 12 (5):
845-849 国内 a
86 Structure of medium-range order in molten Al-Fe alloy. Trans. CONG Hong-ri, BIAN Xiu-fang , LI Hui, QIN
Jing-yu. Nonferrous Met. Soc. China Oct.2002; 12 (5): 947-951 国内 a
78 Microstructures and modification performance of melt-spun Al-10 Sr alloy, Zhonghua Zhang, Xiufang Bian,
Yan Wang, Xiangfa Liu, Journal of Materials Science 2002；37 (20): 4473-4480. 国外 a
88 Microstructural characterization of a rapidly solidified Al-Sr-Ti alloy, Zhonghua Zhang, Xiufang Bian, Yan
Wang, Materials Research Bulletin, 2002; 37 (14): 2303-2314. 国外 a
89 Evaluation of the excess volume and density of liquid Al-Sr alloys Zhonghua Zhang, Xiufang Bian, Yan Wang
Z. Metallkd 2002; 93 (9): 904-909. 国外 a
90 Solidification microstructure formation of an Al-Ce-Sr alloy under conventional and rapid solidification
conditions Zhonghua Zhang, Xiufang Bian, Yan Wang, Junyan Zhang Journal of Alloys and Compounds 2002;
346 (1-2): 134-141. 国外 a
91 Annealing-induced microstructural evolution in melt-spun Al-10% Sr alloy Zhonghua Zhang, Xiufang Bian,
Yan Wang, Xiangfa Liu, Junyan Zhang Materials Characterization 2002; 48 (4): 297-303. 国外 a
92 Preferred orientations of primary Al4Sr dendrites in a rapidly solidified Al-Sr alloy Zhonghua Zhang, Xiufang
Bian, Yan Wang, Materials Characterization 2002; 48 (5): 423-425. 国外 a
93 Metastable phase accompanying crystallization of amorphous Al85Ni10Ce5 alloy Yan Wang, Xiufang Bian,
Zhonghua Zhang, Materials Science and Technology, 2002; 18 (10): 1097-1100. 国外 a
94 Structural simulation of clusters in liquid Ni-Al alloy Li Wang, Xiufang Bian, Hua Yang Physics Letters A 302,
2002, 318-324. 国外 a
95 Medium-range order structure in Al80Fe20 alloy during rapid solidification Wang Li, Cong Hongri, Zhang
Jingxiang, Bian Xiufang, Li Hui, Qin Jingyu Physics Letters A, 301, 2002, 477-483. 国外 a
96 Effect of Al on the glass forming ability of Zr65Ni10Cu25-xAlx alloys Wang Huanrong, Ye Yifu, Min
Guanghui, Zhang Junyan, Teng Xinying and Shi Zhiqiang Z.Metallkd. 2002, 93 (3): 223-227. 国外 a
97 Crystallization kinetics of amorphous Zr65Cu25Al10 alloy Wang Huanrong, Shi Zhiqiang, Wang Yan, Teng
Xinying, Ye Yifu, Min Guanghui and Zhang Junyan Transactions of Nonferrous Metals Society of Chin 2002, 12
(3): 462-465. 国外 a
98 Short-range and medium-range order in liquid Cu-Ni alloy Wang Huanrong, Tian Xuelei, Teng Xinying, Shi
Zhiqiang, Ye Yifu, Min Guanghui and Qin Jingyu Chinese Physics Letters 2002, 19 (2): 233-235. 国内 a
99 Crystallization of amorphous Zr70Cu30-xNix alloys. Wang Huanrong, Ye Yifu, Hui Xidong, Min Guanghui,
Teng Xinying and Shi Zhiqiang. Rare Metals 2002, 21(3): 213-217. 国外 a
100 Effects of nickel on the crystallization of Zr70Cu20Ni10 amorphous alloy. Wang Huanrong, Ye Yifu, Zhang
Junyan, Teng Xinying, Min Guanghui, Shi Zhiqiang and Tian Xuelei. Chinese Physics 2002, 11 (6): 592-595. 国
内a
101 Crystallization processes in amorphous Zr54Cu46 alloy. Wang Huanrong, Ye Yifu, Shi Zhiqiang, Teng
Xinying and Min Guanghui Journal of Non-Crystalline Solids, 2002, 311, 36-41. 国外 a
102 Effects of Ni on the glass forming ability of Zr-Cu based alloy. Wang Huanrong, Ye Yifu, Min Guanghui,
Teng Xinying and Shi Zhiqiang. Journal of Materials Science Letters, 2002, 21 (7): 581-583. 国外 a
103 Decomposition of metallic Zr-Cu-Ni glass. Wang Huanrong, Min Guanghui, Hui Xidong, Ye Yifu, Teng
Xinying, Shi Zhiqiang and Zhang Junyan Journal of Materials Science Letters 2002, 21(21): 1705-1707. 国外 a
104 Formation of nanocrystals in metallic Zr-Cu-Ni glass Wang Huanrong, Hui Xidong, Min Guanghui, Ye
Yifu, Teng Xinying and Shi Zhiqiang. Journal of Alloys and Compounds 2002, 347, 101-104. 国外 a
105 合金非晶形成能力的研究进展 王焕荣，石志强，滕新营，闵光辉，叶以富 功能材料 2002, 33 (4):
357-359. 核心 a
106 Formation of dendritic lamella in eutectic alloys W.M. Wang, J. –M. Liu, J. F. Webb, X. F. Bian, G. L. Yuan,
Z. G. Liu Mater. Lett. 56/6: 921-926 Dec 2002 国外 a
107 Monte-carlo simulation on regular eutectic in binary systems, A W. M. Wang, J. –M. Liu, Mater. Sci. Eng.
336(1-2): 129-134, Oct 2002 国外 a
108 The formation of the block like silicon phase in Al-Si alloy W. M. Wang, J. –M. Liu, X. F. Bian, Z. G. Liu, J.
Mater. Sci. Lett 21(8):613-615 Apr 2002 国外 a
109 Study on relation between lamellar spacing and growth in binary system, Weimin Wang, J.-M. Liu, Zhiguo
Liu, J. Mater. Sci. Tech. 18(4): 411-413 2002 国外 a
110 Eutectic patterns with weak convection in binary systems W. M. WANG, J. –M. Liu, etc J. CRYSTAL
GROW 240(1-2): 313-320 2002 国外 a
111 Dynamic hysteresis in ferroelectric systems: Experiment and Monte Carlo simulation Liu, J.-M.; Wang, W.M.;
Liu, Z.G.; Chan, H.L.; Choy, C.L Applied Physics A: Materials Science and Processing 75/4: 507-514 October
2002 国外 b
112 The Relationship between Microstructures and Refining Performances of Al-Ti-C Master Alloys Liu Xiangfa,
Wang Zhenqing, Zhang Zuogui and Bian Xiufang Materials Science and Engineering A 2002; A332: 70～74 国
外a
113 Al-P 中间合金及其应用 刘相法，乔进国，宋西贵，边秀房，朱利民, 张屹林 特种铸造及有色合金 2002；
（6）: 43～45 核心 a
114 新型 Al-P 中间合金对活塞合金中初晶 Si 的团球化 刘相法，乔进国，刘相俊，边秀房等 内燃机配件
2002，（4）：3~6 一般 a
115 TiC 对新型 Al-P 中间合金变质效果的促进作 韩延峰, 刘相法，王振卿，边秀房 内燃机配件 2002；
（2）:7-10 一般 a
116 变形处理对 Al-Ti-C 中间合金的影响 柳延辉，刘相法，王振卿，刘相俊，边秀房 热加工工艺 2002；
（5）：7-9 核心 a
117 微量 Mg、Si 对 AlTiC 中间合金细化效果的促进作用 柳延辉，刘相法，王振卿，韩延峰，边秀房 铝
加工 2002；25（1）：40-43 一般 a
118 微量 TiC、TiB2 引起铝熔体粘度的突变现象 于丽娜，王海梅，刘相法，刘建同，边秀房 铸造 2002；
51（11）：687-689 核心 a
119 Sn 与 Be 对 AlSiMg 轮毂材料时效过程的影响 亓效刚 王伟民 黄重柏 轻合金加工技术 （46）2002，1
一般 a
120 Sn 对 Al-Si-Mg 系合金的时效动力学分析 亓效刚 刘峰 王伟民 轻合金加工技术 （38）2002, 4 一般 a
282283 In 及 In-Cu 和金熔体的粘度研究. 程素娟,王中华 淄博学院学报(自然科学与工程版). (2)(2002):44-77
一般 a
121 金属熔体中程有序结构的演化及其以遗传性 程素娟,秦绪波,李赛强 科学技术与工程 2(5)(2202):77-78
核心 a
122 In 及 In-1％Cu 熔体团簇的“热收缩”现象 程素娟,王中华,王海梅 山东工程学院学报 16(3)(2002):6-10 一
般a
123 Influence of process parameters on thermal-rate treatment of ZA42 alloy. LI Cheng-dong, TIAN Xue-lei et al
Trans. Nonferrous Met. Soc.China. 2002, 12（5）：926-930 国外 a
124 Liquid structure of the bulk amorphous Zr41Ti14Cu12.5Ni10Be22.5 alloy.. Tian xuelei, Li chengdong, Chen
xichen et al Metallofiz. Noveishie Tekhnol 2002, 24(1):1-7 国外 a
125 Structure of bulk amorphous Zr41Ti14Cu12.5Ni10Be22.5 alloy in amorphous, crystalline, supercooled liquid
and liquid states Tian xuelei, Li chengdong, Chen xichen et al Trans. Nonferrous Met. Soc.China 2002, 12（1）：
34-37 国内 a
126 铸件材料库管理系统的研究与开发. 李成栋 田学雷 王培刚 铸造技术 2002, 23(3):177-180 一般 a
127 铸钢件凝固模拟中的熔池划分技术 田学雷 刘志勇 李成栋 铸造技术 2002, 23(5): 294-296 一般 a
128 Temperature dependence of viscosity of finemet melt. LI Chengdong, Tian xuelei, Chen xichen et al
Metallofiz. Noveishie Tekhnol 2002, 24(10)，1371-1380. 国外 a
129 基于人工神经网络的铝熔体中氢的预测 孟庆格，边秀房，陈建奇 特种铸造及有色合金 2002，5：1-3
核心 a
130 Laser surface remelting and resolidifying process of Zn-27wt%Al alloy Cui hongwei, Geng haoran, Tian
xianfa, Chen chuanzhong, Zhao peng Materials Science and Engineering-A 2002, (323): 103-109 国外 a
131 熔体热速处理对铸造 Mg 合金组织和力学性能的影响 赵鹏，耿浩然，田宪法，崔红卫，耿红霞，刘建
同 中国有色金属学报 2002，Vol.12 S1：241-244 核心 a
132 镁合金的应用与发展动态 耿浩然，崔红卫，赵鹏 铸造技术 2002，（4）：200-202 一般 a
133 不同助磨剂对水泥粉磨效率的影响 陶珍东，郑少华，吴波等 水泥工程 2002, (3)：8～10 一般 a
134 助磨剂对不同水泥的适应性 陶珍东，吴波，赵义等 建材技术与应用 2002, 72(4)：6～8 一般 a
135 助磨剂对水泥性能的影响 陶珍东，郑少华，吴波等 硅酸盐通报 2002, 21(5)：50～53 核心 a
136 钢渣微细粉在混凝土中的应用研究. 陶珍东，郑少华，吴波等 水泥工程 2002，No.6 一般 a
137 超塑变形中相界滑移的扩散-溶解层控制模型 石志强 叶以富 李世春 滕新营 王焕荣. 科学通报 2002,
47 (6): 401-405.
138 Phase boundary sliding model controlled by diffusion-solution zone in superplastic deformation SHI Zhiqiang,
YE Yifu, LI Shichun, TENG Xinying, WANG Huanrong. Chinese Science Bulletin 2002, 47 (14): 1228-1232.
139 Effect of rare earth on superplasticity of Zn-5Al eutectic alloy SHI Zhiqiang, YE Yifu, LI Shichun, WANG
Huanrong, TENG Xinying. Journal of Rare Earths 2002, 20 (3): 209-212.
140 Stored energy analysis of Zn-5Al alloy in SPD SHI Zhi-qiang, YE Yi-fu , XI Xue-kui, LI Shi-chun. Rare
Metals 2002, 21 (3): 218-223.
141 Mechanism for phase boundary sliding and its relevance to diffusion-solution zone in SPD SHI Zhiqiang, YE
Yifu, LI Shichun, ZHANG Lei. Transactions of Nonferrous Metals Society of China 2002, 12 (5): 952-955.
142TiB2 粒子细化铝合金的电子理论分析 石志强 王焕荣 滕新营 叶以富 张磊 石油大学学报(自然科学版)
2002, 26 (3): 76-77
143 Zn-5Al 共晶合金的恒载荷超塑性拉伸实验 石志强，叶以富，李世春，韩彬，王焕荣，滕新营. 金属热
处理 2002, 27 (1): 33-37
144 . Zn-Al 共晶合金准三维微观结构的研究 石志强，叶以富，李世春，韩彬，胡秀莲 理化检验-物理分册
2002，38 (2): 47-49
145 Zn-Al 合金超塑变形的相界滑移和表面效应研究 石志强，郗学奎，张磊，叶以富，李世春 金属热处理
2002, 27 (8): 6-9
146 Fe-C 共晶合金的液态结构和粘度 滕新营，
刘含莲，
王焕荣，
石志强，
叶以富，
耿浩然 钢铁研究学报 2002,
14 (3): 5-8
147 Fe68Si32 合金的液态结构与固态组织的相关性 滕新营，叶以富，石志强，王焕荣，秦敬玉 物理
化学学报 2002, 18 (4): 336-339
2001 年度
1. AlTiB 合金中 TiB2 和 AlB2 的从头研究 李喜珍，边秀房，李秀军 金属学报 2001；37（3）：235--238
国内核心刊物 a
2. Al-Si 合金熔体中氢含量与 Si 含量的关系 孟庆格，边秀房，王伟民，陈建奇 金属学报 2001；37（3）：
258--262 国内核心刊物
a
3. 压力铸造对 Al-Si-Cu 合金组织的影响 韩延峰，刘相法，杨志强 ，边秀房 特种铸造及有色合金 2001；
(4)：183－186 国内核心刊物 a
4. Influence of element Cu on hydrogen content in superheated aluminum melt Li Xizhen, Bian Xiufang, Li
Xiujun , Wang Li Trans. Nonferrous Met. Soc. China 2001, 11(3), 358-360 国内核心刊物
艰(英文)a
5. Refinement and thermal analysis of hypereutectic Al-25%Si alloy Zhang Zhonghua, Bian Xiufang, Wang Yan,
Liu Xiangfa Trans. Nonferrous Met. Soc. China 2001, 11(3), 374-377 国内核心刊物
(英文)a
6. Specific heat of superheated Al-10Sr alloy melts Wang Yan, Bian Xiufang, Zhang Zhonghua, Sun Yimin#
Trans. Nonferrous Met. Soc. China 2001, 11(3), 455-457 国内核心刊物
(英文)a
71. Ai-Ti-C 中间合金的相组成及其细化特性 王振卿，刘相法，边秀房 铸造 2001，50（6）：316～320 国
内核心刊物 a
8. 钾钠对球铁点状石墨及性能的影响 薛强，杨华，边秀房 现代铸铁 2000，4：47-49 国内核心刊物
a
9. Al-10Sr 对 TiB2/2L102 复合材料变质效果的研究 韩延峰，刘相法，边秀房 特种铸造及有色合金
2001，3：21～23 国内核心刊物
a
10. Cu-12 wt %Al 合金熔体内中程有序原子团 潘学民，边秀房, 秦敬玉，王伟民 物理化学学报 2001；
（8）：706-712 国内核心刊物 a
11. Al-Cu 共晶合金熔体中稀土与氢的相互作用 李卫红，边秀房，李海勇 ，段佑峰 金属学报 2001；37（8）：
825--828 国内核心刊物
a
12. 二元合金 Ag50Rh50 从液体到非晶的分子动力学计算 张景祥，边秀房，王丽 无机化学学报 2001; 17(5):
659-664 国内核心刊物
a
13. 原位生产 TiB2/Al-Si-Mg 复合材料的组织与性能 韩延峰，刘相法，边秀房 中国有色金属学报 2001；
11（5）：840-845 国内核心刊物
a
14. Structures of liquid aluminium under high pressure Li Hui , Wang GH , Bian XF, Zhang L Chinese Physics
letters 2001; 18 (4): 495-497 国内核心刊物 (英文)a
15. Separated eutectic structure of Al-11wt pct Si alloy under direct magnetic field Yan Wang, Jiang Jiang ,
Zhonghua Zhang, Xiufang Bian Journal of Materials Science and Technology 2001;17(1):s174-s176 国内核心刊
物 (英文)a
16. 有自由表面的 Ni 原子团簇的熔化 王丽，杨华，边秀房，李喜珍 物理化学学报 2001；17（12）：1097-1101
国内核心刊物 a
17. Laser surface strengthening process of Al-Si base alloy Haoran Geng, Yuchao Niu, Xianfa Tian , Chuanzhong
Chen , Xiaoxia Hou J. Mater. Sci. Technol. 2001, 17, s115-s118 国内核心刊物(英文)
a
18. 过冷状态下的 Cu70Ni30 合金的液态结构 田学雷，陈熙琛 ，A.G. Ilinsky# 中国科学 A 2000， 30（9），
842-846 国内核心刊物
a
19. Correlation between structures of bulk amorphous Zr-Ti-Ni-Cu-Be alloy in different states Xuelei Tian, Xichen
Chen# Journal of Materials Science and Technology 2001, 17(1), 93-94 国内核心刊物
a
20. 丁二烯蒸出塔严重腐蚀失效分析 李爱菊，唐委校 ，张存远 ，李晋鲁 ，孟宪彬 山东工业大学学报
2000；30（5）：485－491 国内核心刊物 a
21. 焊接传热及其对 HAZ 奥氏体晶粒长大过程的影响 孙俊生，武传松 焊接学报 2000, 21（3）, 27-31 核
心a
22. 熔池表面形状对电弧电流密度分布的影响 孙俊生、武传松 物理学报 2000, 49(12), 2427~2432 核心 a
23. 电磁力及其对 MIG 焊接熔池流场的影响 孙俊生、武传松 物理学报 2001, 50(2) , 209~216 核心 a
24. 电弧压力对 MIG 焊接熔池几何形状的的影响 孙俊生，武传松 金属学报 2001, 37(4), 434~4382 核心 a
25. MIG 焊接熔池表面形状与熔滴热焓量分布的数学模型 孙俊生，武传松 计算物理 2001, 18(6), 544-548
核心 a
26. 基于 BP 神经网络的 GMAW 焊接工艺参数设计 胡庆贤，孙俊生等 山东工业大学学报 2001, 29(6),
325~330 核心 a
27. GMAW 焊接过程 干扰信号的模糊识别 胡庆贤，武传松，孙俊生等 焊接学报 2001, 22(6), 48~52 核心
a
28. TIG 焊接熔池形状参数的视觉检测 高进强, 武传松 金属学报 2000, 36(12), 1284~1288 核心 a
29. TIG 焊背面熔宽的神经网络模糊控制 高进强，武传松等 焊接学报 2001, 22(5), 5~8 核心 a
30. HQ130 钢不完全淬火区组织及韧性研究 吴会强，李亚江等 材料科学与工艺 2000, 8 (3), 79-83 核心 a
31. 渗铝钢管焊接接头区的显微组织与耐蚀性研究 王娟,李亚江等 化工机械 2000, 27 (4), 204-207 核心 a
32. 甲醇装置变换工段中设备的电偶腐蚀 李爱菊 腐蚀科学与防护技术 2000；(1)：15－19 国内核心刊物
a
33. Ce 添加量对 Fe-2.4C-17Cr-18Mo-1.0Cu 合金性能的影响 伍燕生 ，刘英才，孟献奇 ，刘俊友 ，尹衍升
粉末冶金技术 2000；18（3）：200－203 国内核心刊物 b
34. 稀土在铁基高铬合金粉末球磨过程中的作用 刘俊友 ，刘英才，尹衍升，刘国权 ，范润华，包志臣 中
国稀土学报 2000；18(4)：347－351 国内核心刊物 b
35. Fe3Al 金属间化合物的机械合金化 范润华,孙康宁，尹衍升，包志臣 机械工程学报 2000；36(8) ：56-59
国内核心刊物 a
36. 铁铝金属间化合物/氧化铝陶瓷复合材料研究最新进展 李爱民，张玉军，孙康宁，尹衍升 材料导报
2000(增刊)：219－221 国内核心刊物 a
37. 内晶型结构纳米复合陶瓷研究进展 崔学民，孙康宁，王昕 材料导报 2000(增刊)：325－327 国内核心
刊物 a
38. Cr 对 Fe-Al/Al2O3 复合材料韧性的影响 李爱民，孙康宁，张玉军，李静，尹衍升 材料工程 2001；46
（9）：21－24 国内核心刊物 a
39. Fe-Al/Al2O3 功能梯度涂层材料研究现状及瞻望 李静，张景德，尹衍升 山东工业大学学报 2001；31
（4）：374－378 国内核心刊物 a
40. 铈对铁基烧结制品中合金元素分布的影响研究 刘英才，刘俊友 ，尹衍升，刘周权 ，徐梦 中国稀土
学报 2001；19(3)：281－283 国内核心刊物 a
41. 共晶 Al-Si 自生复合材料在直流磁场作用下的组织形成规律 王艳，边秀房，姜江 ，徐昌业 复合材料
学报 2001， 18（1），
76-78 国内核心刊物 a
42. 液态纯铁微观结构的温度变化特性 王焕荣，叶以富 ，闵光辉 ， 滕新营，秦敬玉 物理化学学报 2001，
17（9），820-823 国内核心刊物 a
43. 连续电流 TIG 焊熔池图象的低成本自动化检测 刘新峰，高进强，武传松 焊接学报 2001, 22(6), 25~28
国内核心刊物 a
44. 焊接热循环对 Ti-V-Nb 微合金钢中第二相粒子的影响 陈茂爱，孙文涛#，唐逸民# 机械工程学报
2000, 36(10), 99~103 国内核心刊物 a
45. SiCp/LD2 复合材料电弧焊焊接性研究 陈茂爱，陆皓#，唐逸民#，楼松年#，吴人洁# 金属学报 2000,
36(7), 770~774 国内核心刊物 a
46. X-60 钢及其焊接粗晶区中的第二相粒子研究 陈茂爱，
唐逸民#，
楼松年# 山东工业大学学报 2000, 30(3),
242~249 国内核心刊物 a
47. T91 钢焊缝及热影响区显微组织图像分析 王娟，李亚江等 材料科学与工艺 2001, 9(1), 95-99 国内核心
刊物 a
48. HQ130 钢热影响区的 ICHAZ 区组织性能 李亚江、吴会强等 焊接学报 2001, 22(2), 54-58 国内核心刊
物a
49. Cu/Al 真空扩散焊接头显微组织分析 李亚江、吴会强等 中国有色金属学报 2001, 11(3), 424-427 国内
核心刊物 a
50. HQ130 钢焊接区扩散氢分布的数值分析 李亚江、沈孝芹等 焊接学报 2001, 22(3), 39-43 国内核心刊物
a
51. HQ130 低碳耐磨高强钢的组织性能及应用 李亚江、邹增大 钢 铁 2001, 36(9), 55-59 国内核心刊物 a
52. HQ130 钢焊接粗晶热影响区的显微图像分析 王娟，李亚江等 钢铁研究学报 2001, 13(1), 64-67 国内核
心刊物 a
53. HQ130 钢焊接区组织的显微图像分析 王娟, 李亚江 焊接技术 2000, 29 (2), 3-4 国内一般刊物 b
54. 纳米复合陶瓷增韧机制分析 王昕, 谭训彦,周玉 , 侯耀永 陶瓷学报 2000；21(2)：107－111 国内一般
刊物 a
55. The valence electron structure and property analysis of TiC Wang Huanrong, Ye Yifu#, Min Guanghui#, Qin
Jingyu, Wang Weimin Chinese Science Bulletin 2001, 46(12), 1002-1004 国内核心刊物 a
56. TiN 粒子在焊接热循环过程中的溶解、粗化及再析出行为 陈茂爱，高进强等 钢铁钒钛 2001, 22(4),
10~15 国内一般刊物 a
57. Ti 对低合金高强钢焊接粗晶热影响区组织及韧性的影响 陈茂爱等 特殊钢 2001, 22(5), 5~8 国内一般
刊物 a
58. 非晶态 Cu56Zr44 合金的结构及其等温退火晶化过程的研究 王焕荣，滕新营，石志强，叶以富 ，闵光
辉 物理学报 2001，50（11），2192-2197 国内核心刊物 a
59. 共晶 Ga-In 合金的液态结构与粘度研究 王焕荣，叶以富 ，闵光辉 滕新营，石志强，秦敬玉 金属学
报 2001，37（8），
801-804 国内核心刊物 a
60. 0.40%Ce 对共晶 Fe-C 合金液态结构的影响 滕新营，刘含莲 ，石志强，王焕荣，闵光辉 ，叶以富# 金
属学报 2001， 37（9），
907-910 国内核心刊物 a
61. 液态金属 Ni3Al 凝固过程中结构转变的分子动力学模拟 谷廷坤，齐元华 ，秦敬玉 计算物理 2001，
18（1），67-71 国内核心刊物 a
62. 纳米技术简介 张金升，尹衍升，马旭 ，杨先平 现代技术陶瓷 2001；22
(1)：36－39 国内一般刊物
a
63. Liquid structure of Al-12.5% Si alloy modified by antimony Bian Xiufang, Wang Weimin, Qin Jingyu
Materials Characterization 2001; 46(1): 25-29 国外刊物
a
64. Refinement of Fe4Al13 in Al-Fe alloys by plasma remelting process X.F.Bian, X.M.Pan, C.Zhao#, and
S.J.Yuan# Materials Science and Technology 2001; 17(8):917-920 国外刊物
a
65. Structure factors of modified liquid Al-Si alloys Bian Xiufang, Wang Weimin, Yuan Shujuan#, Qin jingyu
Science and technology of Advanced Materials 2001; 2:19-23 国外刊物 a
66. A Fuzzy logic system for process monitoring and quality evaluation in GMAW C.S.Wu, T.Polte#, D.Rehfeldt#
Welding Journal 2001, vol.80(2), 18s-22s 国外刊物 a
67. Sintering Technology Research of Fe3Al/Al2O3 Ceramic Composites Sun kangning J. of Mater
Processing Technology 2001,113/1-3,482-485 国外刊物 a
2000 年度：
1. Medium Range Order and Microstructure of Al-1%Fe Alloy Bian Xiufang, Qin Jinyu, Wang Weiming
Materials Science Forum 2000, 331-337: 343-348
国外刊物 a
2. Structures of Liquid Al-Si Alloy Modified by Sr Bian Xiufang, Wang Weiming. Qin Jinyu Materials Science
Forum 2000, 331-337: 349-354
国外刊物 a
3. Effect of Strontium Modification on Hydrogen Content and Porosity Shape of Al-Si Alloys Bian Xiufang,
Zhang Zhonghua and Liu Xiangfa Materials Science Forum 2000, 331-337: 361--366 国外刊物
a
4. Thermal-rate treatment and structure transformation of Al-13% wt.% Si alloy melt Bian Xiufang, Wang
Weiming Materials letters 2000;44(1):54-58 国外刊物 a
5. Gas Metal Arc Welding Process Monitoring and Quality Evaluation Using Neural Networks C.S. Wu, T. Polte#,
D.Rehfeldt# Science and Technology of Welding and Joining 2000, Vol.5(5), 324-328 国外刊物 a
6. Ti-Nb-V 微合金管线钢焊接粗晶区组织及韧性 陈茂爱，唐逸民#，赵能# 特殊钢 2000, 21(3), 14~17 国内
一般刊物 a
7. Ti 微合金钢及其焊接粗晶区中的第二相粒子分析 陈茂爱，唐逸民#，赵能# 钢铁 钒钛 2000, 21(2)，1~5
国内一般刊物 a
8. Ti-Nb-V 微合金管线钢中第二相粒子分析 陈茂爱，唐逸民#，赵能# 钢铁钒钛 2000, 21(3), 34~38 国内一
般刊物 a
9. 焊接热循环对 Ti 微合金钢中第二相粒子的影响 陈茂爱，唐逸民#，赵能# 理化检验 2000,36（6）, 243~246
国内一般刊物 a
10. X-60 管线钢焊接粗晶区组织及韧性研究 陈茂爱，杨敏#，李亚江 焊接技术 2000, 29(3), 4~6 国内一般
刊物 a
11. Microstructure and Mechanical Properties of Fe/Al Intermetallic Compounds/Al2O3 Composites Fabricated by
Hot Pressing. ZhangYuJun,Y.S.Yin，Y.Zhou＃ Interceram 2000(1)：36-38 国外刊物 a
12. An initial study on SiCw- reinforced Al2TiO5 composites Zhang YuJun
Yansheng Yin Materials Letters
2000(46)：147-148 国外刊物 a
13. Solidification Behavior of Al-18%Si Alloy under Direct Magnetic Field Wang Yan, Bian Xiufang, Liu
Xiangfa and Xu Changye# Materials Science Forum 2000, 331-337: 355-360 国外刊物 a
14. A New Grain Refining Technique for Pure Al by Addition of Molten AlTiB Master Alloys Liu Xiangfa, Bian
Xiufang, Ma Jiaji Materials Science Forum 2000, 331-337: 385-390 国外刊物
a
15. The Relationship of the Inclusions and Hydrogen Content in the Molten Aluminum Alloys Cong Hongri, Bian
Xiufang Materials Science Forum 2000, 331-337: 325-330 国外刊物
a
16. Heredity of Hydrogen in Al Alloys during Melting Process Zhang Zhonghua, Bian Xiufang and Liu Xiangfa
Materials Science Forum 2000, 331-337: 307-312 国外刊物
a
17. Behavior of Hydrogen in Superheated Aluminum and its Alloy Melts Li Xizhen and Bian Xiufang Materials
Science Forum 2000, 331-337: 209-214 国外刊物
a
18. Structure of Al3Fe melt at different temperatures under conditions of rapid cooling Lihui, Bian Xiufang, Yuan
Sujuan＃, Zhang Jingxiang Materials Science and Technology 2000; 16:249-254 国外刊物
a
19. Preparation of Al-Mo Alloys by Cathode Diffusion Method Zhang Zhonghua, Bian Xiufang and Liu Xiangfa
Aluminum Transactions 2000;3(1):133-137 国外刊物
a
20. Rapid solidification and crystal growth of Au3Ag alloy by MD simulation Wangli, Bian Xiufang. Jing-Xiang
Zhang Materials Science and Engineering A 2001; A298: 262-267 国外刊物
a
21. Atomic simulation of amorphisation and crystallization of Al50Ni50 during rapid solidification Wangli, Bian
Xiufang. Jing-Xiang Zhang Materials Science and Technology 2001; 17(6): 663-667 国外刊物
a
22. Structural characteristic of Ag3Au alloy melt and crystal growth by molecular dynamics simulation Li Wang,
Xiufang, Hui Li# Materials Letters 2001; 51:7-13 国外刊物
a
23. Temperature dependence of the viscosity of Al-Sr alloy melts Zhonghua Zhang, Xiufang Bian Z. Metallkd.
2001; 92(12): 1319-1322 国外刊物
a
24. Preparation of an Al-Sr master alloy by molten salts electrolysis Zhonghua Zhang, Xiufang Bian, Xiangfa Liu
Z. Metallkd. 2001; 92(12) : 1323-1326 国外刊物
a
25. Short-range and medium-range order in liquid and amorphous Lin Zhang, Youshi Wu＃, Xiufang Bian,
Hui Li, Weimin Wang, Si Wu＃ Journal of Non-Cry stalline Solids 2000; 262:169-176 国外刊物 a
26. The Size Sudden Change and Structure Evolvement of the Macro-grains of Al-Si Alloys Liu Xiangfa, Qi
Guanghui and Bian Xiufang Materials Science Forum 2000, 331-337: 367-372 国外刊物
a
27. Formation and Prevention of Snow-shaped Speckles on the Worked-face of Al-Si Alloys Qi Quanghui, Liu
Xiangfa and Bian Xiufang Materials Science Forum 2000, 331-337: 379-384 国外刊物
a
28. The Simulation of the Viscosity of Liquid Aluminum Using the Tight-Binding Potential Sun Minhua, Geng
Haoran, Bian Xiufang, and Liu Yan Materials Science Forum 2000, 331-337: 337-342 国外刊物
a
29. Influence of initial heating temperature on the reverse martensitic transformation of Cu-Zn-Al-Mn-Ni alloy Bai
Yujun, Geng Guili＃, Bian Xiufang, Sun Dongshen＃ Materials Science and Engineering A 2000; A284: 25-28
国外刊物 a
30. The Influence of Electromagnetic Stirring on Al-Ti-B Master Alloys Liu Xiangfa, Zhang Zuogui, Gao Zhen#,
Bian Xiufang JOM 2000; 52(5): 47-48 国外刊物 a
31. The Atomic-Structure Changes in Al-16 Pct Si Alloy above liquidus Weiming Wang, Xiufang Bian, Jingyu
Qin, S.I. Syliusarenko# Metallurgical and Materials Transactions A 2000; 31,2163-2168 国外刊物 a
32. Structural studies of clusters in melt of FeAl compound Li Hui#, Ding Feng# , Wang Jinlan#, Bian Xiufang
Journal of Chemical Physics 2001; 114(14): 6413-6416 国外刊物 c
33. Molecular dynamics computation of the liquid structure of Fe50Al50 alloy Li Hui#, Bian Xiufang, Wang
Guanghou# Materials Science and Engineering A 2001; A298:245-250 国外刊物
b
34. Microstructure of CuZnAlMnNi shape memory alloy due to double reversible transformations Yujun Bai,
Guili Geng＃, Dongsheng Sun＃, Xiufang Bian and Shouren Wang＃ Journal Physics: Condens.Matter 2000; 12:
L61-L63 国外刊物
a
35. Antifriction and wear behavior of ZAS35 zinc alloy: influence of heat treatment and melting technique Geng
Haoran, Tian Xianfa#, Cui Hongwei, Li Chendong, Zhao Peng Materials Science and Engineering A 2001, 316,
109-114 国外刊物
a
36. Laser surface remelting process of Cu-Cr-Fe contact material Haoran Geng, Yan Liu, Chuanzhong Chen#,
Minhua Sun, Yuqi Gao Materials Science and Technology 2000, 16 (5), 564-567 国外刊物
a
37. Study on atomic density changes in the liquid Al-Si alloys by X-ray diffraction method Weimin Wang,
Xiufang Bian, Jingyu Qin, Tongxiang Fan# Journal of Materials Science Letters 2000, 19, 1583-1585 国外刊物
a
38. Origin of the anomalous volume expansion in Al-Si alloys above liquidus W.M. Wang, X.F. Bian, H.R. Wang,
Z. Wang, L. Zhang#, Z.G. Liu#, J.M. Liu# Journal of Materials Research 2001, 16 (12), 3592-3598 国外刊物
a
39. Crystal growth, thermal and optical properties of SmCa4O(BO3)3 crystal Zhang Shujun#, Yang Hua, Cheng
Zhenxiang#, Liu Xuesong#, Chen Huanchu# Journal of Crystal Growth 2000, 208, 482-486 国外刊物
b
40. Evolution of small nickel cluster during solidification Hui Li#, Feng Ding#, Guanghou Wang#, Jing Zhang#,
Xiufang Bian Solid State Communicatins 2001, 120, 41-46 国外刊物 c
41. Microstructure of Cu70Ni30 alloy in liquid and undercooled liquid Tian Xuelei, Li Chengdong, Chen Xichen#,
O.G. Ilyinsky# Metallofiz. Noveishie. Tekhnol. 2001, 23, 12, 1629-1637 国外刊物
a
42. Correlation of liquid structure and viscosity of pure liquid iron Xinying Teng, Guanghui Min#, Hanlian Liu#,
Yifu Ye# Metallofiz. Noveishie. Tekhnol. 2001, 23, 3, 401-406 国外刊物
a
43. Oxidation resistance of Fe-Cr-Ni-N alloy at 1200℃ Xinying Teng, Guanghui Min＃, Yifu Ye＃, Zhifu
Wang＃ Metallofiz. Noveishie. Tekhnol. 2001, 23, 4, 559-566 国外刊物
44. The origin of pre-peak on the structure factor of non-crystalline alloy Mg70Zn30 Huan-rong Wang, Yi-fu
Ye#, Guang-hui Min# Metallofiz. Noveishie. Tekhnol. 2001, 23, 6, 727-734 国外刊物
a
45. effects of welding heat input on microstucture and hardness in heat-affected zone of HQ130 steel J.S.SUN、
C.S.Wu Modeling and Simulation in Mater. Sci Eng. 2001, (1):25-36 国外刊物 a
46. Analysis of the current density on the deformed surface of GMA weld pools J.S.SUN、C.S.Wu Int. J. Join.
Mater 2001, 13(3): 62-68 国外刊物 a
47. Experimental determination of weld pool geometry in GTAW J.Q.Gao and C.S.Wu Science and Technology of
Welding and Joining 2001, Vol6(5): 288~292 国外刊物 a
48. XRD and TEM analysis of Fe3Al alloy layer on the surface of the calorized steel Li Yajiang et al Materials
Research Bulletin 2001, 36(9): 2389-2394 国外刊物 a
49. Fine structure at the diffusion welded interface of Fe3Al/Q235 dissimilar materials Wan Juan, Yajiang LI
Bulletin of Materials Science 2001,24(6): 639-642 国外刊物 a
50. Micro-image analysis in the CGHAZ of HQ130 high strength steel Li Yajiang et al International Journal of
Joining of Materials 2001, 13(4), 97~101 国外刊物 a
51. The characteristics of J-integral under biaxial stressing W.Q. Wang#, S.S. Sun#, A.J. Li, S.J. Zhou#
International Journal of Pressure Vessels and Piping 2000, 77(4), 159-166 国外刊物 b
52. Microstructure in the weld metal of austenitic-pearlitic dissimilar steels and diffusion of element in the fusion
zone Yajiang LI et al Journal of Materials Science and Technology 2001, 17(3), 338-342 国内核心刊物 a
53. Numeric simulation of thickness of intermetallic compounds in interface zone of diffusion bonding for Cu and
Al Yajiang LI et al Transactions of Nonferrous Metals Society of China 2001, 11(6), 908-911 国内核心刊物 a
54. Study on the transport mechanism in the anode boundary layer of welding argon arc C.S.Wu, J.Q. Gao Acta
Metallurgica Sinica (English Letters) 2001, vol.14(3), 191-198 国内核心刊物 a
55. 双层陶瓷复合材料与金属在空气中的钎焊 刘军红# 孙康宁 尹衍升 王德云# 焊接学报 2001；22（6）：
33-36 国内核心刊物 b
56. 温度对液态重金属 Pb 结构变化的影响 边秀房，李辉，张景祥，李玉忱＃ 无机化学学报 2000; 16（1）:
47-52 国内核心刊物
a
57. 铝和镍元素对 CuAlNi 形状记忆合金液态结构的影响 潘学民，边秀房 科学通报 2001，46（18），
1579-1582 国内核心刊物
a
58. 铈对液态共晶 Fe-C 合金粘度的影响 滕新营，刘含莲＃，王焕荣，石志强，叶以富＃，耿浩然 中国稀
土学报 2001， 19（5），
435-438 国内核心刊物 a
59. 液态金属粘滞性的研究现状与展望 刘燕，耿浩然，孙民华，崔红卫 铸造
2000，49（12），875878
国内核心刊物 a
60. ZAS35 锌合金/碳钢层状复合材料的制备 耿浩然，张海林，崔红卫，张妍宁，田宪法＃ 中国有色金属
学报 2001， 11（S1），134-138
国内核心刊物
a
61. 锑变质共晶硅的异质形核 亓效刚，陈俊华，江旭彪 特种铸造及有色合金 2000，1，13-15 国内核心刊
物 a
62. “绿色”高效 Al-Si 合金变质剂－Al-P 中间合金 齐广慧，刘相法，杨志强，柳延辉，边秀房 材料科学与
工艺 2001，9（2）， 211-214 国内核心刊物
a
63. FeAl/Al2O3 复合材料的纳米内晶型结构与成分分析 孙康宁，安阁英＃，尹衍升，王昕 山东工业大学
学报 2000；30(2)：137－141 国内核心刊物 a
64. 承载 Fe3Al/Al2O3 复合材料失效过程声像特征 孙康宁，
尹衍升，
安阁英＃，
张景德 自然科学进展 2000；
10(10)：925－930 国内核心刊物 a
65. 金属工艺课程体系的改革与思考 孙康宁，王昕，张景德，李爱菊，尹衍升 合肥工业大学学报 2001；
15（增）：180－183 国内核心刊物 a
66. 金属间化合物陶瓷复合材料研究进展. 张玉军，尹衍升 兵器材料科学与工程, 2000；23(1) ：8-11 国内
核心刊物 a
67. 发光陶瓷釉面砖的研制. 张玉军，金键，段军 材料科学与工程 2000；18(2)：32-34 国内核心刊物 a
68. Fe3Al/Al2O3 陶瓷基复合材料—一种新型刀具材料 张玉军，尹衍升，王德云 ，尹衍利 ，孟昭敏 机械
工程材料 2000；24(2)：30-31 国内核心刊物 a
69. Fe-Al 金属间化合物/Al2O3 陶瓷复合材料研究 张玉军，尹衍升，包志臣 硅酸盐通报 2000；19(4)：39-42
国内核心刊物 a
70. 非晶态 Mg70Zn30 合金结构因子的预峰 王焕荣，叶以富 ，闵光辉 ， 滕新营 物理学报 2001，50（3），
523-527 国内核心刊物
a
71. 纯铝熔体微观结构演变及液固相关性研究 王丽，李辉 ，边秀房，孙民华，刘相法 物理学报 2000；
49（1）：45-48 国内核心刊物 a
72. 液态结构与 Al-Fe-Ce 合金短程有序的相关性 张林，吴佑实 ，边秀房，李辉 物理化学学报 2000；16
（1）：9-14 国内核心刊物
a
73. 铝的熔体结构与含氢量 张忠华，边秀房, 秦敬玉，王伟民，刘相法 金属学报 2000；36（1）：33-36 国
内核心刊物 a
74. 纯铝熔体的微观动力学行为 李辉，边秀房，王伟民 原子与分子物理学报 2000;17(1):123-128 国内核
心刊物 a
75. Fe,Ce 原子在 Al-Fe-Ce 非晶合金中的分布 吕伟 ，张林，吴佑实 ，边秀房，李辉 原子与分子物理学报
2000;17(1):33-38 国内核心刊物 b
76. Effects of solid deformation and melt vibration on structure and refining performance of Al5Ti1B master alloy
Qi Xiaogang, Liu Xiangfa, Bian Xiufang, Wang Daqing , Ma Jiaji. Trans.Nonferrou Met.Soc.China 2000;
10(1):80-83 国内核心刊物(英文)
a
77. Double reversible transformations under various treatment states Bai Yujun, Sun Dongshen , Geng Guili , Bian
Xiufang Trans.Nonferrou Met.Soc.China 2000; 10(1): 47-49 国内核心刊物(英文)
a
78. Formation Mechanism of Curved Martensite Structures in Cu-based Shape Memory Alloys Yujun Bai, Qiquan
Shi , Guili Geng , Dongsheng Sun , Xiufang Bian J.Mater.Sci.Technol 2000; 16(1):79-81 国内核心刊物
(英文)
a
79. 铝熔体除氢过程动力学 张忠华，边秀房, 刘相法 中国有色金属学报 2000；10（2）：217-220 国内核
心刊物 a
80. Al-Ti-B 线材加工方法比较 王振卿，刘相法，边秀房 铸造 2000；49（4）：231-233 国内核心刊物
a
81. Effect of quenching condition on micro-inhomogeneous structure of Al-Fe-Ce amorphous alloy Zhanglin, Bian
Xiufang,Wu Youshi , Lihui Trans.Nonferrous Met.Soc.China 2000; 10(3):414-417 国内核心物
(英文)
a
82. AlTiB 和 Al-5%Sr 中间合金对轮毂铝合金的晶粒细化和变质作用 亓效刚，边秀房，王玉厚 铸造 2000；
49（6）：321-326 国内核心刊物
a
83. Ni50Al50 合金的液固转变及晶体生长过程的分子动力学模拟 王丽，边秀房，韩秀峰 原子分子物理学
报 2000；17(3):447-454 国内核心刊物
a
84. 等离子重熔对 Al-16%Si 合金中 Si 相的细化作用 潘学民，边秀房，赵程 金属学报 2000；36（7）：689-692
国内核心刊物 a
85. 金属 Cu 液固转变及晶体生长的分子动力学模拟 王丽，边秀房，李辉 物理化学学报 2000；16（9）：
825-829 国内核心刊物
a
86. Refining Effect of Boron on Hypoeutectic Al-Si Alloys Wangli, Bian Xiufang J. Materials Science and
Technology 2000;16(5):517-520 国内核心刊物 a
87. AlTiC 中间合金对 Al-Si 合金的细化 王振卿，刘相法，张作贵，边秀房 特种铸造及有色合金 2000；(5)：
4-5 国内核心刊物
a
88. Al-Ti-B 中间合金的遗传性研究与推广应用 张作贵，刘相法，边秀房 铸造 2000；49（10）：758-763 国
内核心刊物 a
89. Au3Ag 合金的快速凝固及晶体生长过程的分子动力学模拟 王丽，边秀房，李辉 人工晶体学报 2000；
29（4）：335-341 国内核心刊物
a
90. Al-Ti-C 系中 TiC 形成的热力学与动力学研究 张作贵，刘相法，边秀房 金属学报 2000；36（10）：
1025--1029 国内核心刊物
a
91. 金属 Cu 熔化结晶过程的分子动力学模拟 王丽，边秀房，李辉 化学物理学报 2000；13（5）：544-550
国内核心刊物 a
92. Al 熔体粘度的突变及与熔体微观结构的关系 孙民华，耿浩然，边秀房，刘燕 金属学报 2000；36（11）：
1134--1138 国内核心刊物
a
93. 两种 Al-Ti-C 中间合金的组织和细化效果比较 张作贵，刘相法，王振卿，边秀房 特种铸造及有色合金
2000；(6)：29－31 国内核心刊物
a
94. 原位生成 TiB2/ZL102 复合材料的研究 韩延峰，刘相法，边秀房 特种铸造及有色合金 2000；(6)：
35－37 国内核心刊物
a