Resume
Name: Huijun LI
Contact details:
Faculty of Engineering
University of Wollongong , NSW 2522
Australia
Tel: 02 42218197
Fax: 02 42213238
Emai: huijun@uow.edu.au
Education:
1992-1996 PhD (Materials Science and Engineering)
University of Wollongong
Wollongong, Australia
1984-1987 Master of Materials Science and Engineering
Graduate School, Tianjin University
P. R. China
1980-1984 Bachelor of Mechanical Engineering
Tianjin University
P. R. China
Employment History:
July, 2008-present
Associate Professor
Project leaders for 6 defence projects
Project leaders for 2 pipeline projects
Head of Welding Research Group
Faculty of Engineering
University of Wollongong, NSW 2522
Australia
July, 2005-July, 2008
Senior Research Scientist
Deputy supervisor of Electron Microscopy Laboratory
Materials Division
Australian Nuclear Science & Technology Organisation
New Illawarra Road, Lucas Heights, NSW 2234
July, 2000-June, 2005
Research Scientist, Electron Microscopy Group
Materials Division
Australian Nuclear Science & Technology Organisation
New Illawarra Road, Lucas Heights, NSW 2234
July, 1998-June, 2000
Research Fellow, CRC for Welded Structures
Dept. of Materials Engineering
University of Wollongong
Australia
March, 1995-June, 1998
Research Associate, CRC for Welding and Joining
Dept. of Materials Engineering
University of Wollongong
Australia
October, 1991-December, 1994
Part time Research Assistant, Shape memory materials group
Part time Teaching Assistant
Demonstrating practical class for undergraduate students
X-ray diffraction
Differential scanning calorimetry
Hot rolling and cold rolling
Electron microscopy and electron diffraction
Metallography
Mechanical tests (tensile, impact, etc.)
Dept. of Materials Engineering
University of Wollongong
Australia
May, 1990-October, 1991
Lecturer, Electron Microscopy Group
Analysis Centre, Tianjin University
P. R. China
April, 1989-April, 1990
Assistant Engineer, Electron Microscopy Group
Analysis Centre, Tianjin University
P. R. China
July, 1987-April, 1989
Assistant Engineer, Teaching Assistant
Surface Engineering Group
Dept. of Physics, Tianjin Normal University
P. R. China
Major Research Work:
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Rail steel welding research (CRC Rail)
Development of high strength linepipe steels (Ti/N ratio)
An investigation of the weld ability and properties of Ti alloys produced
by new extraction techniques and cold spray direct manufacture
The development of high Mn TWIP steels
The development of novel armour materials for light armoured vehicles.
Repairing technology for NAB bronzes.
The effect of welding thermal cycles on microstructure and mechanical
properties of Zircaloy-4
Nuclear-material interaction research (neutron irradiation, neutron
diffraction, positron life time spectroscopy, etc)
National and International safeguards and security research (anti-terrorism
research)
Research on CRC for light metals
Creep properties of P91 and P92 steel welds
Prequalifying emergency welding (temper bead welding)
Integrity of high energy piping (CRC project)
Coatings for high temperature steam valve spindles (CRC project)
Synroc for immobilising nuclear waste
Mechanised girth welding, (CRC project)
Welding galvanised steel, (CRC project)
Hot cracking in high strength cellulosic electrode weld metal, (CRC
project)
Electric resistance welding of high strength pipe line, (CRC project)
Transverse cracking in submarine steel weld metal, (CRC project)
The application of shape memory couplings for high pressure fuel pipe,
(CRC project)
Life estimation of welded pressure equipment, (CRC project)
High productivity welding of stainless steels, including duplex stainless
steels, ferritic stainless steels and austenitic stainless steels, characterising
corrosion failure of welding joints, (CRC project)
Cold cracking of HSLA pipe line steels weldment, including X70 and
X80, (CRC project)
Investigation of pipeline corrosion in Northern China oil fields, iron based
shape memory alloy pipe joints have been developed for oil pipelines.
Study of Fe-Mn-Si based shape memory alloys, the purpose of this
research was to develop new corrosion resistant shape memory alloys for
commercial application (ARC project)
Surface modification of bearing steels using ion implantation
Study of the symmetric reduction of crystal lattices
*
*
*
*
*
*
Study on new method for determination of unknown crystal lattices
(A computer program was developed using this method, which won the
third class national science award in P. R. China)
Study on bainitic transformation in Cu-Zn Al shape memory alloys
Study on the microstructure of advanced ceramics (ZrO2, mullite and
composites)
Development of software for calculating electron diffraction patterns, the
software package consists of 11 sub-programs: phase analysis, indexing
CBED, Burgers vectors determination of dislocations, extinction
calculation, orientation relationship determination, habit plane
determination , indexing Kikuchi patterns, indexing high order Laue
zones, periodic and ordered structure calculation and weak beam image
calculation.
Study on the transformation kinetics and strengthening mechanism of
deformation induced maraging stainless steels
Study on the structures and properties of B-V, Cr coating on steels
Publications:
During the last 20 years of my research in China and Australia, I have published
over 100 papers in refereed journals and conference proceedings. See attached list.
Prizes:
1. A new method for determination of unknown crystal structures – The Third
National Science Award 1991 (P. R. China)
2. Welding consumables for galvanising kettle - A Ramsay Moon Best Industry
Paper Award 2000 (Australia)
3. The Best Micrograph Prize - “The 18th Australian Conference on Microscopy
& Microanalysis, Feb. 2004, Geelong, Australia.
Skills:
Expertise in using electron microscope to study the microstructure of materials
(metals, ceramics) in areas such as phases transformations and structural evolution.
Experience in mechanical tests, failure analysis and materials identification. Detailed
knowledge of crystallography, welding metallurgy, line pipe steels and shape memory
alloys.
Publication List
Dr Huijun Li
Referred Journals and Conference Proceedings
1. H. Li, F. Chen and G. Li, “The transformation kinetics of deformation induced
maraging stainless steel”, Proceedings of the First Chinese Youth Symposium on
Materials Science, 1987, P172.
2. H. Li, F. Chen, G. Li and J. Yao, “The strengthening mechanism of deformation
induced maraging stainless steel”, Proceedings of the First Chinese Youth
Symposium on Materials Science, 1987, P169.
3. W. Ye, G. Lu, Y. Su, H. Li, F. Liu, K. Lu, J. Zhao, Z. Zhan and W. Li, “A
microstructural investigation of 52100 steel by N ion implantation and recoil
implantation”, Nuclear Instruments and Methods in Physic Research, B39, 1989,
P563-566.
4. H. Li, W. Liu and Y. Chen, “Ambiguous diagnosis and failure analysis”, Conference
of the 3rd Failure Analysis, Guangzhou, China, 1988.
5. H. Li, Y. Chan and W. Liu, “The primary study on expert system for failure
analysis”, Proceedings of the 2nd Chinese Youth Symposium on Materials Science,
1989, P20.
6. H. Li, Y. Chen, R. Wang, Z. Yang and W. Liu, “On symmetry reduction of crystal
lattices”, Proceedings of the 2nd Chinese Youth Symposium on Materials Science,
1989, P23.
7. H. Li, R. Wang, Y. Chen, Z. Yang and W. Liu, “A new method for determination of
unknown crystal lattice”, National Conference on Materials Science and engineering,
Nanjing, China, Oct., 1989.
8. H. Li, Y. Chen and W. Liu, “Dislocations in mullite”, Journal of Chinese Electron
microscopy Society, Vol. 3, 1990, P246.
9. H. Li, R. Wang, Y. Chen, Z. Yang and W. Liu, “The new method for determination
of crystal structure in micro-zone”, Materials Science and Development, Vol. 4,
1990, P41.
10. D. Dunne and H. Li, “The effect of strengthening austenite on shape memory effect
of ferrous alloys”, The 3rd IUMRS International Conference on Advanced Materials,
Tokyo, Japan, August, 1993 (Invited paper).
11. H. Li, D. Dunne, “The mechanism of thermomechanical training of a newly
developed FeMnSiCrCu shape memory alloy”, J. De Physique IV, Vol. 5, Dec.,
1995, PC8-415.
12. H. Li, N. Alam, L. Chen and D. Dunne, “Hydrogen cracking in high strength thinwalled pipeline girth welds”, Conference on Welding of High Strength Thin-walled
Pipelines, Australia, 1995, Paper13.
13. H. Li, Z. Chen and D. Dunne, “The effect of thermomechanical training on the
structure and crystallography of stress induced martensite in Fe-Mn-Si based shape
memory alloys”, MICROCOSMOPOLITAN, Feb., 1996, Sydney, Australia.
14. H. Li, D. Dunne, “The effect of copper on the shape memory effect and corrosion
resistance of Fe-Mn-Si based shape memory alloys”, Materials Research 96, Vol. 1,
July, 1996, Brisbane, Australia, P117.
15. N. Alam, H. Li, L. Chen and D. Dunne, “Fracture – microstructure relationship of
hydrogen assisted cracking in steel weldments”, Materials Research 96, Vol. 3, July,
1996, Brisbane, Australia, P74.
16. N. Ahmed, K. Baughn, L. Jarvis, D. Dunne and H. Li, “High productivity welding of
stainless steels”, Australian Welding Research, CRC No. 19, Nov., 1996, Welding
Technology Institute of Australia.
17. H. Li and D. Dunne, “The effect of thermomechanical training on the shape memory
effect and mechanical properties of an Fe-Mn-Si ternary alloy”, International
Conference on Thermomechanical Processing of Steels and Other Materials, July,
1997, Wollongong, Australia, P1761.
18. H. Li and D. Dunne, “Mechanical properties of Fe-Mn-Si based shape memory
alloys”, China-Japan bilateral Symposium on Shape Memory Alloys, C-J SMA’97,
Nov., 1997, Hangzhou, China, P148-153.
19. H. Li, Z. Chen, D. Dunne, Z. Sterjovski, A. Croker and J. Zhu, “Changes in
Composition and morphology of H type carbides in heat affected zone of 1/2Cr1/2Mn-1/4V steel repair welds”, Australian Welding Journal, Vol. 42, 1997, P33-40.
20. N. Alam, H. Li, L. Chen and D. Dunne, “Effect of hydrogen on fracture morphology
of hydrogen assisted cracking in steel weldments”, The 7th International Fracture
Conference, Feb., 1997, Sydney, Australia.
21. H. Li and D. Dunne, “The newly developed corrosion resistant iron-based shape
memory alloys”, ISIJ international, Vol. 37, No. 6, 1997, P605-609
22. N. Alam, H. Li, L. Chen and D. Dunne, “Fracture morphology of hydrogen-assisted
cold cracking in steel weldments”, Australian Welding Journal, Vol. 42, 1997, P4347.
23. H. Li, D. Dunne and N. Kennon, “The factors influencing shape memory effect and
phase transformation behaviour of Fe-Mn-Si based shape memory alloys”, Materials
Science and Engineering, A273-275 (1999), P517-523..
24. H. Li and D. Dunne, “Comparison of potentiostatic test and ASTM G48 test in
measuring critical pitting temperature of duplex stainless steels”, Proc. of
Materials’98, IMEA, Wollongong, Australia, 1998, P474-480.
25. D. Dunne and H. Li, “The changes of mechanical behaviour during
thermomechanical training of Fe-Mn-Si based shape memory alloys”, Proc. of
Materials’98, IMEA, Wollongong, Australia, 1998, P529-534.
26. C. Jones, H. Li and D. Dunne, “High productivity welding of austenitic stainless
steels”, Proc. of Materials’98, IMEA, Wollongong, Australia, 1998, P 289-296.
27. H. Tsuei, D. Dunne and H. Li, “Analysis of weld metal microstructure in arc welded
steels Proc. of Materials’98, IMEA, Wollongong, Australia, 1998, P319-324.
28. H. Li, C. Jones, Z. Chen, D. Dunne and A. Croker, “Quantitative analysis of the
HAZ of welded 1/2Cr-1/2Mo-1/4V steam pipe steel by image analysis”, Proc. of
Materials’98, IMEA, Wollongong, Australia, 1998, P301-306.
29. A. Croker, T. Nicholls, H. Li and C. Jones, “Life estimation of welded pressure
equipment operating at elevated temperature”, Proceeding of Operating Pressure
Equipment V, Melbourne, Australia, 19-21 April, 1999, P277-282.
30. C. Jones, H. Li, A. Croker, Z. Chen and D .Dunne, “The characterisation of the
microstructure of the HAZ of 2.25Cr1Mo pressure steam pipe weldments”, The
WTIA 48th Annual Conference, Australia, Oct., 1999.
31. Y. Zhang, K.P. Hart, B.S. Thomas, Z. Aly, H. Li, and M. Carter “Dissolution of
synthetic brannerite at 90°C”, Mat. Res. Soc. Symp. Proc. Vol. 663 © 2001 Materials
Research Society.
32. M. Han, W. Liu, Y. Chen, J. Wang and H. Li, “Symmetry reduced cell and its
application”, Journal of Tianjin University Science and Technology, 2000, 33(1),
P28.
33. K. Watson, B. Cannon, M. Bosman and H. Li, “Welding consumables for
galvanising kettles”, The Proceedings of IIW Asian Pacific international
Congress/WTIA Annual conference 2000, Melbourne, Paper 26.
34. K. Watson, B. Cannon, M. Bosman and H. Li, “Welding consumables for
galvanising kettles”, Australian Welding Journal, Vol. 46, 2001, P33-38.
35. M.W.A. Stewart, B.D. Begg, E.R. Vance, K. Finnie, H. Li, G.R. Lumpkin, K.L.
Smith, W.J. Weber and S. Thevuthasan, “The replacement of titanium by zirconium
in ceramics for plutonium immobilization”, MRS 2001, America, JJ2.5
36. M. Blackford, G. Lumpkin, K. Smith, H. Li and M. Colella, “ Progression of ion
irradiation damage in titanate ceramics as a function of dose” 17th Australian
Conference on Electron Microscopy, 4th-8th, Feb. 2002, Adelaide Australia, P26
37. D. Dunne, N. Alam, H. Li and L. Chen, “Cracks - Running Hot and Cold. A Tale of
Weld Metal Integrity”, IIW Asian Pacific International Congress, 2000, P1812
38. K.L.Smith, Z.Zhang, P.McGlinn, D.Attard, H.Li, G.R.Lumpkin, M.Colella,
T.McLeod, Z.Aly, E.Loi, S.Leung, M.Ridgway, W.J.Weber and S.Thevuthasan,
"The effect of radiation damage on zirconolite dissolution", Annual Materials
Research Society Meeting, Boston, December 2002.
39. D. Perera, M. Stewart, H. Li, R. Day and E. Vance, "Phase relationships in the
system of CaHfTi2O7-Gd2Ti2O7 with up to 15 mole% additions of Al2TiO5 and
MgTi2O5", J. Amer. Ceram. Soc. 85 (2002), P2919-2924.
40. M.G.Blackford, G.R.Lumpkin, K.L.Smith, H.Li and M.Colella, “Ion irradiation
damage in titanate ceramics as a function of dose”, Microscopy and Microanalysis
2002, Quebec City, August 2002.
41. P.J. McGlinn, T. McLeod, Z. Aly, G. Leturcq, M.G. Blackford, Z. Zhang, H. Li,
G.R. Lumpkin , “Aqueous Dissolution and Surface Alteration Studies of Nd-doped
Zirconolite in 0.001M Citric Acid at 90°C”, MRS 2003, Sweden
42. M. Carter, E. Vance and H. Li, “Hollandite-rich titanate ceramics prepared by
melting in air”, 105th Annual Meeting Exposition, The American Ceramics Society,
April, 2003.
43. M. Carter, E. R. Vance and H. Li,
“Hollandite-rich ceramic melts for
immobilisation of Cs”, MRS 2003, June, 2003, Sweden.
44. Y. Zhang, E. Loi, M. Blackford, T. McLeod, H. Li and B. Begg, “Effect of pH and
Uranium valence state the dissolution of Brannerite”, MRS 2003, Sweden.
45. B. Begg, E. Vance, H. Li, T. McLeod, N. Scales and M. Bhati, “Titanate ceramic
matrices for alumina-rich waste”, MRS 2003, Sweden.
46. C. Jones, H. Li, A. Croker and D. Dunne, “Welding simulation of the heat affected
zone (HAZ) of 2.25Cr1Mo pressure vessel steel”, WTIA 48th Annual Conference,
Brisbane, Otc, 1999 Australia.
47. D. Dunne, H. Tsuei and H. Li, “Structural characteristics of multipass flux cored arc
steel welds”, Science and Technology of Welding and Joining, 2003, vol 8, no. 2,
P123-131.
48. M.W.A. Stewart, B.D. Begg, E.R. Vance, K. Finnie, H. Li, G.R. Lumpkin, K.L.
Smith, W.J. Weber and S. Thevuthasan, “The Replacement of Titanium by
Zirconium in Ceramics for Plutonium Immobilisation” in Scientific Basis for Nuclear
Waste Management XXV, Ed. B.P. McGrail and G.A. Cragnolino, Materials Research
Society, Warrendale, PA, USA, 2002. P311-318.
49. V. Luca, C. Griffith, H. Chronis, J. Widjaja, H. Li, N. Scales, “Ion-Exchange
Properties of Microporous Tungstates”, MRS 2003, Sweden.
50. V. Luca, C. Griffith, H. Chronis, J. Widjaja, H. Li, N. Scales, “Cs+ and Sr2+ IonExchange Properties of Microporous Tungstates” , MRS 2003, Sweden.
51. V. Luca, C.. Griffith, H. Chronis, J. Widjaja, H. Li, N. Scales, “Ion irradiation
damage in zirconate and titanate ceramics for PU disposition”, ICEM, Sept. 2003,
Oxford, Engliand.
52. H. Li, K. Short, G. K. Smith and A. Croker, D. Nolan and S. Huang and D. Franke,
“The characterisation of new and ex-service high pressure steam turbine valve
spindles made of 42%Ni alloy”, Materials 2003 – “Adaptive Materials for Modern
Society”, Oct. 2003, Sydney.
53. S. Huang, D. Nolan, J. Norish, H. Li, A. Croker and D. Franke, “Surface coatings for
improving high temperature wear and oxidation resistance for steam valve spindle in
the power plants”, Proc. of International conference on Surface Engineering, Sept.
2003, Sydney, P1-10.
54. H. Tsuei, D. Dunne and H. Li, "Neural network analysis of impact properties of flux
cored arc weld metals for structural steel", Science and Technology of Welding and
Joining, Vol. 8, No. 3, 2003, P205-212.
55. H. Tsuei, D. Dunne and H. Li, "Quantification of structure and properties of ferritic
weld metal in flux cored arc welded steels", Science and Technology of Welding and
Joining, Vol. 8, No. 3, 2003, P213-220.
56. E.R.Vance, J.V.Hanna, B.A.Hunter, B.D.Begg, D.S.Perera, H.Li and Z.Zhang,
“Substitution of Zr, Mg, Al, Fe, Mn, Co and Ni in Zirconolite, CaZrTi2O7
Environmental Issues and Waste Management Technologies VIII, American Ceramic
Society, 2003., P313-320.
57. E. Budzakoska, D. Dunne, M. Law, H. Li and B. Small, “The performance of an
emergency cold weld repair on a 2.25Cr-1Mo longitudinally seam-welded pressure
vessel” Materials Forum, 27, 2004, P45-53.
58. .K. Smith, M. Colella, D. Mitchell, H. Li, A. Day, M. Blackford, R. Trautman and D.
Attard, “Electron microscopy: a versatile probe”, AINSE Conference, Dec. 2003,
Sydney.
59. B. Latella, M. Ignat, C. Barbe, D. Cassidy and H. Li, “Cracking and decohesion of
sol-gel hybrid coatings on metallic substrates”, Sol-Gel International conference,
2003, Sydney.
60. B. Latella, K. Short, H. Li and S. Humphries, “Multiple cracking evolution in an
expanded austenite layer from tensile loading”. Materials 2003 – “Adaptive Materials
for Modern Society”, Oct. 2003, Sydney.
61. K. Smith, Z. Zhang, P. McGlinn, D. Attard, H. Li, G. Lumpkin, M. Colella, T.
McLeod, Z. Aly, E. Loi, S. Leung, K. Hart, M. Ridgway, W. Weber and S.
Thevuthasan, “The effect of radiation damage on zirconolite dissolution”, Mat. Res.
Soc. Symp. Proc. Vol. 757, II6.12, P289-296.
62. E. Budzakoska, D. Dunne, M. Law, H. Li and B. Small, “The creep performance of
service-aged cold weld repair on a pressure vessel”, WTIA annual conference,
Brisbane, April 2004.
63. H. Li, D. Mitchell, G. Smith, “Characterisation of service exposed P91 steels”, The
18th Australian Conference on Microscopy & Microanalysis, Feb. 2004, Geelong,
Australia, P143.
64. K. Smith, M. Blackford, R. Giere and H. Li, “SEM and TEM characterisation of
particulate atmospheric emissions from a power plant”, The 18th Australian
Conference on Microscopy & Microanalysis, Feb. 2004, Geelong, Australia, P180.
65. S. van de Geest, B. Begg, R. Metcalfe, H. Li, G. Thorogood, E. Vance and M.
Carter, “Characterisation of synroc phases formulated for the immobilisation of high
level radioactive waste”, The 18th Australian Conference on Microscopy &
Microanalysis, Feb. 2004, Geelong, Australia, P181.
66. Z. Zhang, H. Li, E. Vance, T. McLeod and N. Scales, “Aqueous dissolution of
pyrochlore and zirconolite in F-bearing solution”, ICAMP-3, Advanced Materials
Processing, Nov. 2004, Melbourne, Australia.
67. M. Carter, E. Vance, D. Cassidy and H. Li, “Hollandite-rich ceramics: Effect of
composition on melting temperature”, Scientific Basis for Nuclear Waste
Management XXVII, P249-254
68. M. Carter, E. Vance, D. Cassidy and H. Li, 106th Annual Meeting & Exposition,
American Ceramic Society, Indianapolis, Indiana , April 18-21, 2004.
69. H. Li, G. Smith, K. Short and A. Croker, “The Characterisation of Service Exposed
Steam Vavle Spindles”, 52nd WTIA Annual Conference, Brisbane, Australia, 20-21,
Oct. 2004
70. B. A. Latella, M. Ignat, C. J. Barbe, D. J. Cassidy and H. Li, “Cracking and
decohesion of Sol-Gel hybrid coatings on metallic substrates”, J. Sol_Gel.
Technology, 31, 2004, P143-149.
71. B. Yang, H. Li, M. Blackford and V. Luca, “Morphology and Electrochemical
properties of Self-organising Low Density Mesoporous WO3 Films Prepared by
Electrodeposition”, The second International Conference on Advanced Materials and
Nanotechnology, 6-11 Feb. 2005, Queenstown, New Zealand.
72. K.L. Smith, M.G. Blackford, R. Siegele, R. Gieré, H. Li, S. Vogt and C. Harland
“Fly Ash Characterisation by SEM, TEM and Synchrotron Microprobe Techniques”,
AMAS VIII (the 8th biennial symposium of the Australian MicroBeam Analysis
Society), 13th-17th February 2005, Melbourne, Australia.
73. M L Carter, E R Vance, D J Cassidy, H Li and D R G Mitchell, "Holandite ceramics:
Effect of composition on melting temperature" , Environmental Issues and Waste
Management Technologies in the Ceramic and Nuclear Industries X (Ed. J Vienna, C
J Herman, and S Marra), Ceram. Trans. Vol 168 (2004) 207-216.
74. R. Gieré, H. Li, M. Blackford and K. Smith, “Particulate Emissions from
Combustion of a Coal+Tire Blend”, World of Cola Ash 2005 Conference, 11-15
April, Kentucky, USA.
75. B. Small, H. Li and E. Budzakoska, WELDS 2005, “Comparison of seam weld zone
properties, weld repair, and in-service monitoring of 2 1/4 Cr 1Mo reheater headers”,
Int. Conference on Design, Testing, Assessment and Safety of High Temperature
Welded Structures, 8-9 September 2005, GKSS Research Centre Geesthacht
(Hamburg) German.
76. H. Li, P.J. McGlinn, T.E. Payne, Y. Zhang, “Interactions involving waste package
composites - implications for radionuclide sourcetermsof ceramic-based
wasteforms”, MIGRATION'05, 10th International Conference on Chemistry and
Migration Behaviour of Actinides and Fission Products in the Geosphere, 18-23
Sept., 2005, Avignon, France.
77. Y. Zhang, G. Lumpkin, H. Li, M. Colella, M. Carter and E. Drabarek,
“Recrystallisation of amorphous natural brannerite through annealing: the effect of
radiation damage on the chemical durability of brannerite”, Journal of Nuclear
Materials , 350 (2006), P293-300.
78. B. Latalla, C. Barbe, D. Cassidy, H. Li and M. Ignat, “Mechanical stability of SolGel hybrid coating on metallic substrates”, Revista Materia, V10, n2, pp199-204, 7,
2005.
79. H. Li , Y. Zhang, P. J. McGlinn and S. Moricca, “Characterisation of stainless steelSynroc interactions after hot isostatic pressing (HIP)”, Journal of Nuclear Materials,
355(2006) P136-141.
80. Y. Zhang, H. Li, P. J. McGlinn, B. Yang, R. A. Day and B. D. Begg, “Stainless
steel/glass-ceramic interactions under hot isostatic pressing (HIPing) conditions”,
Journal of nuclear Materials Vol375, 2008, P315-322.
81. D. Attard, R. Wuhrer, and H. Li, “Preparation of ceramic and titanium-aluminium
alloy materials for EBSD”, CHANNEL user meeting, 13-14, Oct. 2005, Sydney.
82. Z. Aly, D. Attard, R. Chisari, I. Kelly, J. Leslie, H. Li, H. Wong, D. Hill and M.
Colella, “Chemical and isotopic analysis of bullet lead and cartridge cases by ICPMS, ICP-OES and SIMS.”, the 18th International Symposium of the Forensic
Sciences , 2-7 April 2006 at Fremantle, WA.
83. Z. Sterjovski, H. Li and d. Dunne, “Effect of welding conditions and alloy design on
structural evolution and creep resistance of advanced 9-12% chromium martensitic
steel”, Intermediate meeting of IIW Comm. IX WG “Creep”, University of
Nottingham, UK, May 17-18, 2006.
84. B. Yang, H. Li, M. Blackford and V. Luca, “Novel low density mesoporous WO3
films prepared by electrodeposition”, Current Applied Physics, 6(2006) P436-439.
85. D. Carr, E. Budzakoska, P. Stathers, H. Li, R. Harrison, A. Hellier and W. Yeung,
“Predicting the J integral fracture toughness of Al 6061 using small punch test”,
Fatigue and Fracture of Engineering Materials and structures, vol 30 (2007) 796-807.
86. Y. Zhang, E. Vance, B. Begg and H. Li, “Diffuse reflectance spectroscopy of
neptunium ions in polycrystalline ceramics designed for immobilisation og HLW”,
Journal of Alloys and Compounds, 2007, P598-602.
87. B. Latella, B. Gan and H. Li, “Fracture toughness and adhesion of thermally grwon
titanium oxide on medical grade pure titanium”, Journal of Surface and coatings
Technology , Vol. 201, 2007, P6326-6331.
88. P. McGlinn, Y. Zhang, H. Li and T. Payne, “Effect of stainless steel can/glassceramic interaction layer on aqueous durability”, MRS, Boston, 2007.
89. T. Wei, D. G. Carr, H. Li, K. Smith, and R. P. Harrison, “Surveillance of the
Fracture Behavior of Zircaloy-4 Welds Using the Small Punch Test”, Journal of
ASTM International, Vol. 5, No. 5, Paper ID: JAI101005, 2008.
90.
E. Vance, M. La Robina, H. Li and J. Davies, “SYNROC-D type ceramics
produced by hot isostatic pressing and cold crucible melting for immobilisation of
(Al, U) rich nuclear waste”, Scientific Basis for Nuclear Waste Management XXX,
Materials Research Society, Warrendale, PA, USA, P 181-186.
91. H. Li, T. Nicholls, S. Sulaiman, D.Dunne, D. Mitchell and B. Small, “High
temperature performance of the Gleeble simulated P91 HAZ”, New Materials
Seminar, London, 6, 2007.
92. S. Yun, D. Attard, J. Davis, H. Li, S. Morricca, R. Knott and G. Gadd, “Spray dried
microspheres as a route to clay/polymer nanocomposites”, Journal of Applied
Polymer Science, 108(3), 2008, 1550-1556.
93. N. Stanford, D. Dunne and H. Li, “Re-examining the effect of NbC precipitation on
shape memory in Fe-Mn-Si-based alloys”, Scripta Materilia Volume 58, Issue
7, April 2008, Pages 583-586.
94. Y. Zhang, H. Li and S. Moricca, “Pyrochlore-structured titanate ceramics for
immobilisation of actinides: hot isostatic pressing (HIPing) and stainless steel/waste
form interactions,” Journal of Nuclear Materials, 377 (2008) 470–475.
95. M. Carter, H. Li, Y. Zhang, A. Gillen, E. Vance, “HIPed Tailored Pyrochlore-Rich
Glass-Ceramic Waste Forms for the Immobilization of Nuclear Waste”, Scientific
Basis for Nuclear Waste Management XXXII MRS Proceedings Volume 1124, 2008,
Paper #: 1124-Q04-01.
96. M.L. Carter, H. Li, Y. Zhang, E.R. Vance, D.R.G. Mitchell, “Titanate ceramics for
immobilisation of uranium-rich radioactive wastes arising from 99Mo production”,
Journal of Nuclear Materials 384 (2009) 322–326.
97. K. Liss, U. Garbe, T. Schambron, J. Almer, H. Li, K. Yan, R. Dippenaar, “Direct,
time-resolved in-situ observation of dynamic recrystallization and related phenomena
in the bulk of zirconium alloy”, 33rd Condensed Matter and Materials
MeetingCharles Sturt University, Wagga Wagga, NSW, 4 - 6 February, 2009.
98. S. Sulaiman, H. Li, M. Drew and D. Dunne, “Simulation of HAZ microstructures in
P91 steel using dilatometric and Gleeble techniques”, 2nd ECCC Creep Conference,
April, 21-23, 2009, Zurich, Switzerland, P 1046-1057.
99. S. Sulaiman, H. Li and D. Dunne, “Creep testing of simulated heat affected zone
structures in P91 steel”, Welding in the World, v 53, n SPECIAL ISSUE, 2009,
P527-532.
100.L.M. Yang, A.K. Tieu, D.P. Dunne, S.W. Huang, H.J. Li, D. Wexler, Z.Y. Jiang,
“Cavitation erosion resistance of NiTi thin films produced by Filtered Arc Deposition
at different substrate temperatures”, Wear, 267(2009), P233-243.
101.M. D. Callaghan, S.R. Humphries, M. Law, H. Li, and W.Y. Yeung, “Evaluation of
High Temperature Fatigue Behaviour of P22 by Miniature Specimen Testing”,
Materials Science Forum, Vols. 638-642, 2009, P3937-3942.
102. K.-D. Liss, U. Garbe, H. J. Li, K. Yan, “In-situ observation of dynamic
recrystallization in the bulk of zirconium alloy”, Advanced Engineering Materials,
Vol. 11, No. 8, 2009, P637-640.
103.Thorogood, K. J., Li, H., Carr, D. G., Harrison, R. P. and Nolan, D, “The effect of
welding thermal cycle on the microstructure of zircaloy-4”, Welding in the World, v
53, n SPECIAL ISSUE, 2009 P613-618.
104.K. Yan, K-D Liss , H. Li , R. Dippenaar , J. Daniels , U. Garbe, “From single grain to
texture”, Advanced Engineering Materials, Vol. 11, No. 10, 2009, P771-773.
105.Zhang, Y., Stewart, M. W. A., Li, H., Carter, M. L., Vance, E. R., and Moricca, S.
(2009). Zirconolite-rich titanate ceramics for immobilisation of actinides - waste
form/ hip can interactions and chemical durability. Journal of Nuclear Materials,
395(1-3), 69-74.
106.Y. B. Wang, M. Louie, Y. Cao, X. Z. liao, H. J. Li, S. P. Ringer and Y. T. Zhou,
“High pressure torsion induced microstructural evolution in a hexagonal closedpacked Zr alloy”, Scripta Materialia, 62 (2010), P214-217.
107.K. Yan, D. Carr, M. Callaghan, K. Liss and H. Li, “Deformation mechanisms of
twinning-induced plasticity steels: In situ synchrotron characterization and
modelling”, Scripta Materialia, 62 (2010), P246-249.
108.K-D Liss, X. Thibault, H. Li, P. Bendeich, “Synchrotron Micro Tomography Reveals
3D Shape of Precipitates in Cast Magnesium Alloy”, Journal of Materials Science
and Engineering, 5 (2011), P195-199.
109. Z. Sterjovski, J. Donato and H. Li, “The effect of welding speed and contact-tip-toworkpiece distance on the microstructural homogeneity and bead profile of tandem
GMA steel welds”, MST'10 (Materials Science and Technology, 2010) in Houston,
USA on October 17-21, 2010.
110. M.D. Callaghan, S.R. Humphrie2, M. Law, M. Ho, P. Bendeich, H. Li and W.Y.
Yeung, “Energy-based Approach for the Evaluation of Low Cycle Fatigue Behaviour
of 2.25Cr-1Mo Steel at Elevated Temperature”, Materials Science and Engineering aStructural Materials Properties Microstructure and Processing, 527(2010), 56195623.
111. L. Kuzmikova, M. Callaghan, N. Larkin, R. Scott, R. De Jong, H. Li, and J. Norrish,
“A Study of the Continuous Cooling Behaviour and Effect of Preheat and Interpass
Temperature on the HAZ of High Strength Quenched and Tempered Steel“,IIW 2010
Annual Assembly, Istanbul, Turkey.
112. Q.Lian, Y.B. Wang, R.B.Figueiredo, X.Z. Liao, M. Callaghan, H.J. Li, S.P. Ringer,
T.G. Langdon and Y.T. Zhu, “Microstructural Evolution of Twinning-Induced
Plasticity Steels Deformed by High-Pressure Torsion” The 5th International
Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD5), March
21-25, 2011 in Nanjing, China.
113. K. Yan, S. Kabra, D. G. Carr, M. D. Callaghan, R. Dippenaar, H. Li and K.-D. Liss*,
“Deformation Mechanisms of twinning-induced plasticity steels investigated by
Individual 2D diffraction image texture measurements”, International Symposium on
Plasticity and its Current Applications “Plasticity’11”, Puerto Vallarta, Jan. 3-8,
2011
114. H. Li, D. Grudgings, N. Larkin, M. Callaghan and L. Kuzmikova “Optimization of
Welding Parameters for Repairing NiAl Bronze Components”, Materials Science
Forum Vols. 706-709 (2012) pp 2980-2985.
115. L. Noerochim, J. Wang, S. Chou, H. Li. & H. Liu. SnO2-coated multiwall carbon
nanotube composite anode materials for rechargeable lithium-ion batteries.
Electrochimica Acta, (2010) 56 (1), 314-320.
116. Z. Sterjovski, J. Donato and H. Li, “The effect of travel speed and CTWD on the
bead profile and microstructure of Tandem GMA steel welds”, Australian Welding
Journal, vol 56, No. 1 2011, P40-46.
117. S. Sulaiman, H. Li and D. Dunne, “Creep resistance of simulated HAZ structures in
P91 steel”, Australian Welding Journal, vol. 55, No. 4, 2010, P41048.
118. N. Hoye, H. Li, J. Norrish and R. Dippenaar, “Post-weld atmospheric
contamination of gas tungsten arc deposited welds in commercially pure
and Ti-6Al-4V titanium alloys”, 12th World Conference on Titanium—Ti2011, June 19-24, Beijing, China.
119. L Kuzmikova, J Norrish, H Li, M Callaghan, “Research to establish a systematic
approach to safe welding procedure development using austenitic filler material for
fabrication of high strength steel”, 16th International Conference on the Joining of
Materials, 10-13, May, 2011, Tisvildeleje, Denmark.
120.C. Rathod, D. Wexler, T. Chandra and H. Li, “Microstructural characterization of
railhead damage in insulated rail joints”, Materials Science Forum Vols. 706-709
(2012) pp 2937-2942.
121.D. Dunne, H. Li and C. Jones, “Re-austenisation of chromium bearing pressure
vessel steels during the weld thermal cycle”, 6th IIW Asian Pacific International
Congress & 56th WTIA Annual Conference, 2011, Cairns, Australia.
122. N. Larkin, Z. Pan, S. Van Duin ,M. Callaghan, H. Li, J. Norrish, “Tandem Gas
Metal Arc Welding for Low Distortion Butt Welds”, Advanced Materials Research
Vol. 337 (2011) pp 511-516.
123. Kuzmikova, L., Larkin, N., Pan, Z., Callaghan, M., Li, H. and Norrish, J.,
“Feasibility of the laser hybrid process for welding high strength Q&T steel”, in 6th
IIW Asian Pacific International Congress & 56th WTIA Annual Conference, 2011,
Cairns, Australia
124. L. Fletcher, Z. Zhu, M. Marimuthu, L. Zheng, M. Bai, H. Li and F. Barbaro, “Effect
of Ti and N concentrations on microstructure and mechanical properties of
microalloyed high strength line pipe steel welds”, Welding of high strength pipeline
Steels, International Seminar, Araxa, 2011, Brazil.
125. R. Holder, N. Larkin, H. Li, L. Kuzmikova, Z. Pan and J. Norrish "Development of
a DC-LSND Welding Process for GMAW on DH-36 Steel", 6th IIW Asian Pacific
International Congress & 56th WTIA Annual Conference, 2011, Cairns, Australia.
126. S. Uzgur, H. Li, M. C. Kushan, Y. Ma, Y. Uzunonat and F. Diltemiz, “Electron
Beam Welding Varestraint Test of ALLVAC 718 plusTM for Aviation Technology”,
Advanced Science Letters, 13, pp831-832 (2012).
127. Z. Wang, H. Li, U. Garbe, M. Callaghan, Y. Wang and X. Liao, “Microstructural
evolution during gaseous hydrogen charging of Zircaloy-4 processed by highpressure torsion: A comparative study”, Journal of Materials Letters, Vol 68, 2012,
P310-313.
128. L. Kuzmikova, N. Larkin, Z. Pan, M. Callaghan, H. Li and J. Norrish, “Investigation
into feasibility of hybrid laser-GMAW process for welding high strength quenched
and tempered steel”, Australian Welding Journal, 2012, Vol. 57, pp. 43-48.
129. L. H. Su, C. Lu, L. Z. H, L. C. Zhang, P. Guagliardo, A. K. Tieu, S. N. Samarin, J.
F. Williams and H. J. Li, “Vacancy and positron annihilation in ultrafine grained
aluminium severely deformed at room and cryogenic temperatures”, accepted by
Acta Materialia.
130. F.J.Barbaro, J.Norrish, H.Li, “Understanding Weld Metal Hydrogen Assisted Cold
Cracking (WMHACC) in High Strength Low Alloy Steels”, SEAISI, Bali, Indonesia,
28-31 May 2012.
131. H. Li, N. Lane, L. Kuzmikova, J. Norrish and M. Callaghan, “The effect of sulphur
level on the hardenability of Q&T steels”, The First International Conference on
Metallic Materials and Processing, 8 – 11 July 2012, Gold Coast, Queensland,
Australia, Keynote paper.
132. Y. Shi, S. Chou, J. Wang, D. Wexler, H. Li, H. Liu, Y. Wu, “Graphene wrapped
LiFePO4/C composites as cathode materials for Li-ion batteries with enhanced rate
capability”, accepted by Journal of Materials Chemistry.
133.Z. Zhu, L. Kuzmikova, M. Muruganant, H. Li, L. Fletcher, F. Barbaro. “Role of Ti
and N in line pipe steels”, Science and Technology of Welding and Joining
(accepted).
134. N. Lane, Z. Sterjovski and H. Li, “An investigation of simulated CGHAZ in
HSLA65 and DH36 naval shipbuilding steels”,
65th Annual Assembly &
International Conference of the International Institute of Welding, IIW Document IX2417-12, July, 2012, Denver, Colorado, USA.
135.Zhiyang Wang, Huijun Li, Ulf Garbe, Mark D. Callaghan, “Observations on the
zirconium hydride precipitation and distribution in Zircaloy-4 by scanning electron
microscope and neutron tomography”, AMPT 2012, Australia.
136. N. P. Hoye, E. C. Appel, D. Cuiuri and H. Li, “Characterisation of metal deposition
during additive manufacturing of Ti-6Al-4V by arc-wire methods”, Twenty Third
Annual International Solid Freeform Fabrication Symposium – An Additive
Manufacturing Conference, August 6-8, 2012, Austin, Texas, USA.
137. Zhiyang Wang , Ulf Garbe, Huijun Li, Andrew Studer, Robert P. Harrison, Mark D.
Callaghan, Yanbo Wang and Xiaozhou Liao, “Gaseous hydrogen charging induced
microstructure, texture and mechanical property evolutions in the high-pressure
torsion processed Zircaloy-4”, Scripta Materialia, 67 (2012) P752-755.
138. Z. Zhu, M. Muruganant, L. Kozmikova, H. Li, F. Barbaro and C. Jones, “Influences
of Ti/N ratio on simulated CGHAZ microstructure and toughness in X70 steels”,
Science and Technology of Welding and Joining (accepted).
139. A. Kusmoko, D. Dunne, H. Li and D. Nolan, “LASER CLADDING OF
STAINLESS STEEL SUBSTRATES WITH STELLITE 6”, AMPT 2012, Australia.
140. H. Li and D. Mitchell, “Microstructural Characterisation of P91 steel in the Virgin,
Service Exposed and post-service Re-normalised conditions”, AMPT, 2012,
Australia
141. Ching-Tun Peng, Mark Callaghan, Huijun Li, Kun Yan, Klaus-Dieter Liss, Tuan
Ngo, Priyan Mendis and Chang-Ho Choi, “On the compression behaviour of Fe18Mn-0.6C-1.5Al”, AMPT, 2012 Australia
142. Z. Pan, N. Larkin, H. Li, and J. Norrish, “Optimizing Tandem GMAW Parameters
for Penetration with Minimal Distortion”, AMPT, 2012 Australia
143. Hua Zheng, Theo Sinkovits, Huijun Li and Yue Zhao, “IMPROVED CORROSION
PERFORMANCE OF Ti/TiN COATED Al2024-T3 ALLOY WITH A TIXAL1-X
TRANSITIONAL LAYER PRODUCED BY FILTERED ARC DEPOSITION”,
AMPT 2012, Australia.
144. A Paradowska, N Larkin, H. Li, Z. Pan, M. Law, “Residual stress measurements of
welds made with a low distortion weld technique (DC-LSND)”, AMPT 2012,
Australia
145. Zhixiong Zhu, Lenka Kuzmikova, Huijun Li, Liang Chen, Bob De Jong and Frank
Barbaro, “Grain Coarsening Characteristics of Modern Nb Microalloyed Steels”, 5th
international conference on recrystallisation and Grain Growth, May 2013, Sydney,
Australia
146. Nicholas Hoye, Huijun Li, John Norrish, Rian Dippenaar and Ali DehghanManshadi, “Weldability of Ti-6Al-4V Alloys Formed via Various Powder
Consolidation Techniques”, Key Engineering Materials Vol. 520 (2012) pp 314-319.
147. Zhijia Zhang, Jia-Zhao Wang, Shu-Lei Chou, Chao Zhong, Hua-Kun Liu, Huijun Li,
“Polypyrrole-coated α-LiFeO2 composite with enhanced electrochemical properties”,
The 16th International Meetind on Lithium Batteries, June 17-22, 2012, ICC Jeju,
Korea
148. Yi Shi, Shu-Lei Chou, Jia-Zhao Wang, Hui-Jun Li, Hua-Kun Liu, Yu-Ping Wu, “In
situ hydrothermal synthesis of VO2/graphene with improved cycling performance”,
accepted by Journal of Power Sources