MATERIAL SAFETY DATA SHEET
Manufacturer:
Catalytic Materials LLC
325 Heartland Drive
Pittsboro, NC 27312
Telephone: 919 918 7638
Fax:
919 918 7638
E-mail: info@catalyticmaterials.com
www.catalyticmaterials.com
Product: Graphite Nanofibers
Section 1
Product Identification
Chemical name:
Formula:
Chemical Family:
Other Names:
CAS Number:
Carbon Nanofibers
Carbon
Graphite
Graphite Nanofibers, Carbon filaments, Carbon Nanochips, Platelet GNF
7782-42-5
Section 2
Composition and Information Ingredients
Component
Synthetic graphite
Metallic impurities
%
100
<1
OSHA (PEL)
15 Mppc
ACGIH (TLV)
2.5 mg/m3 respirable dust
Section 3
Hazards Identification
Eye Contact:
Skin Contact:
Inhalation:
Ingestion:
Acute and Chronic
Health Effects:
May cause irritation
No known hazards, but may be mildly irritant
May cause irritation to respiratory tract and is possibly allergenic.
No known hazards, but may be irritate gastrointestinal tract
High concentration of dust may be irritating to eyes, skin, mucous
membranes and respiratory tract.
Section 4
First Aid Measures
Eye exposure:
Immediately flush eyes with copious amounts of water for 15 minutes.
Consult physician.
Remove contaminated clothing, flush skin with water. Wash with soap
Remove individual to fresh air area. If breathing difficulties persists, consult
physician.
Not expected to require first aid. If large amounts swallowed, get medical
advice.
Skin Contact:
Inhalation:
Ingestion:
Section 5
Fire and Explosion Hazard Data
Flash Point:
Explosion limits:
Extinguishing media
Special Procedures:
Other hazards:
Not applicable
Unknown
Flammable solid. Use carbon dioxide, dry chemical powder or water spray.
None
Thermal decomposition or combustion may produce dense smoke.
Page 1 of 2
Section 6
Accidental Release Measures
Spill Procedures:
Sweep or vacuum
Section 7
Handling and Storage
Handling and storage:
Keep in closed container. Store in cool, dry, well-ventilated area. Wash
thoroughly after use
Section 8
Exposure Controls and Personal Protection
Eye Protection:
Use ANSI approved glasses or goggles.
Respiratory Protection:
Use of a high efficiency particle respirator.
Skin protection:
Impervious gloves and protective clothing is recommended
Ventilation:
Laboratory fume hood.
Section 9
Reactivity
Stability:
Very stable
Hazardous Decomposition
Products:
Carbon monoxide, carbon dioxide, smoke
Hazardous Polymerization:
Will not occur
Incompatibility:
Strong oxidizing agents
Conditions to avoid:
Incompatibles
Section 10
Environmental Information
Ecological effects:
Unknown
Section 11
Disposal
Dispose of this material in accordance with local, state and federal regulations
Section 12
Comments
Danger:
Flammable irritates skin and eyes.
Employers should use this information only as a supplement to other information gathered by them and
should make independent judgment of suitability of this information to ensure proper use and protect the
health and safety of employees. This information is furnished without warranty and any use of the product
not in conformance with this Material Safety Data Sheet or in combination with any other product or
process is the responsibility of the user.
February 15, 2016
Page 2 of 2