DOSS NEW ASIMOM
DS-1168
(Bluetooth speaker)
Model No.: DOSS ASIMOM
Enjoy your music everywhere
Thank you to have chosen the DOSS quality. This product has been created
by our professional team and according to the worldwide regulation. For a
better use of your new device, we recommend you to read carefully this user
manual and keep it for record.
Product sketch map
1. Play/Pause : Press to play/Pause the tune.
Press and hold: Bluetooth pair function
2. Volume down/up : Press
to decrease the volume and press
to increase
the volume.
3. Speakerphone/ hand-free: After your phone paired with the speaker, press it to
answer the phone when a call is coming or press it to end a call.
4. Status indicator:
Blue light flash slowly: Turning on the speaker
Blue light flash fast: Bluetooth is pairing
Red: Aux in mode
5. Microphone
6. Power switch: Orange means power on.
Black means power off.
7. 3.5mm aux in jack (Use a 3.5mm audio cable to connect with other devices)
Insert the 3.5mm audio cable: Aux in mode
Pull put the 3.5mm audio cable: Bluetooth mode
Operation
1.Turn the power switch on the bottom of Speaker, the prompt tone will appear "It is
ready, waiting for device pairing";Please hold the Play/pause button,the prompt tone
will appear”it is pairing,waiting for device connecting” and the indicator on the top
changes from slow flash to fast flash.
2. Turn on the Bluetooth device on your phone, and search DOSS NEW ASIMOM
and pair. .When successfully paired,"It is paired" prompt sound comes out. Play music
from your phone.
Note:Once paired successfully, both the speaker and your Bluetooth device will store
each other. Next time when you use the same device to play music by the same
speaker, there is no need to re-pair and use pass word.
3.Adjust the volume by press or hold the Volume +/- buttons on the top of speaker,
press the Play/Pause button to play or pause the tune. Press and hold the Play/Pause
button to turn on/off the Bluetooth.
4.Hand-free function. When there comes a call, the speaker will announce the number
automatically, then just press the Phone/hand-free button to answer the phone
call/end the call.
After the call ends, the speaker will continue playing music.
5.Power off: When not in use, please turn off the switch to red status to prevent the
waste of power.
Charging
1.Speaker charging: Turn the switch to CH, then put the speaker on the spare power
station correctly and connect the USB cable to the computer or a 5V/1A power
adaptor. Then power indicator :
Red: means the speaker main unit is under charging.
Blue: means the speaker spare power station is under charging (Speaker unit
power is full)
2.Charge your smart phones: Turn the switch on the spare power station to PS, then
the power indicator will start flashing fast in green. Use a USB cable to connect your
phone with the spare power station to charge your phone.
Note: When spare power station is not in use, please turn the switch to CH to avoid
waste of power.
For the tablet & computer's set-up method, please refer to the mobile's.
3.5mm Audio Input
Requires a 3.5mm audio cable (Included)
1. Connect a 3.5mm audio cable to the 3.5MM AUDIO INPUT on the speaker and an
audio output on an MP3 player or other audio sources.
2. Speaker will switch to Line In mode automatically.
3. Press the Vol-/+ button or native controls on the connected MP3 player to control
volume.
4. Press Play/Pause on the speaker to play/pause the tune, or just control the tune by
press Play/Pause on the MP3 player.
Trouble shooting
Symptom
Can not pair successfully
Possible problem and Solution
Check whether the speaker is in standby and
searching mode.
Check whether there are too many Bluetooth
receivers around your Bluetooth device. Turn off
them to avoid any disturbance. And pair again.
The sound is small or Check the volume setting on both the speaker
distorted
and your Bluetooth device and adjust the volume
to a suitable level.
Check whether the distance between the speaker
and your Bluetooth device is out of its working
Can not play properly, the distance, or whether there are some obstacles
music is intermittently
block the communication between the speaker
and the Bluetooth device.
Probably it is power shortage, please charge the
speaker.
Under Bluetooth mode, Press and hold the Play/Pause button to turn off
the STATUS LED is off
the Bluetooth, then press and hold the
Play/Pause button to turn on the Bluetooth,
re-pair the speaker with the Bluetooth device.
Specifications
• Model No.: DS-1168(DOSS NEW ASIMOM)
• Bluetooth V2.1+EDR(A2DP)
• Metal housing
• Rechargeable Li-ion battery included
• Main unit Battery capacity: 3.7V 500mAh
•Spare power Battery capacity: 3.7V 1020mAh
• Mini USB jack, power by USB cable (USB cable included)
• 3.5mm Aux jack for connection to other MP3, CD, Laptop…
• Output power: 1.5W
• Working distance: ＜ 10 M
Important Safety Instructions
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
10. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
11. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Warning: To reduce the risk of electric shock, do not remove
cover (or back). No user-serviceable parts inside.
Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance