CBHS LEWISHAM TAS DEPARTMENT
INDUSTRIAL TECHNOLOGY - HSC COURSE 2007/2008
SCOPE & SEQUENCE
TERM 4 - 2007
Sequence of Topics
Week 1:
Major project design ideas, literacy calculations and
graphics.
(H3.1, H3.2, H5.1, H5.2)
Week 2:
Major project design ideas, literacy calculations and graphics.
(H3.1, H3.2, H5.1, H5.2)
Week 3:
Cabinet hardware, fittings and fasteners.
(H4.3)
Week 4:
Composite materials
(H4.3)
Week 5:
Major Project Proposal & Presentations
(H3.1, H3.2, H5.1, H5.2)
Week 6:
Veneering and Marquetry Processes
(H4.3)
Week 7:
Major project development
(H3.1, H3.2, H4.3, H5.1, H5.2)
Week 8:
Major project development
(H3.1, H3.2, H4.3, H5.1, H5.2)
Outcomes to be Assessed
H3.1
is skilled in sketching, producing and interpreting
drawings
H3.2
selects and applies appropriate research and problemsolving skills
H4.3
critically applies knowledge and skills related to
properties and characteristics of materials/components
H5.1
selects and uses communication and information
processing skills
H5.2
selects and applies appropriate documentation
techniques to project management
Assessment Tasks
1. Major Project Proposal:
Oral Presentation
Term 4 Week 5
Weighting: 15%
CBHS LEWISHAM TAS DEPARTMENT
INDUSTRIAL TECHNOLOGY - HSC COURSE 2007/2008
SCOPE & SEQUENCE
TERM 1 - 2008
Week 1:
Sequence of Topics
Major project development and OH&S tests.
(H2.1, H3.3, H4.1)
H1.1
Outcomes to be Assessed
Investigates industry through the study of businesses
in one focus area
Assessment Tasks
2.
Week 2:
Major project development and Drawing & Sketching Techniques.
(H2.1, H3.1)
H1.2
Identifies appropriate equipment, production and
manufacturing techniques and describes the impact of
new and developing technologies in industry
H2.1
Demonstrates proficiency in the use of safe working
practices and workshop equipment maintenance
techniques
H3.1
is skilled in sketching, producing and interpreting
drawings
Week 5: Major project development
Industry Study – Environmental Factors.
( H2.1, H3.3, H4.1, H7.1)
H3.2
selects and applies appropriate research and problemsolving skills
Week 6: Major project development
Industry Study – Personal Issues
(H1.1, H2.1, H3.3, H4.1)
H3.3
Applies design principles effectively through the
production of projects
H4.1
Demonstrates competence in practical skills appropriate
to the major project
H4.3
Critically applies knowledge and skills related to
properties and characteristics of materials/components
H5.2
Selects and applies appropriate documentation
techniques to project management.
H7.1
evaluates the impact of the focus area industry on the
social and physical environment.
Week 3: Major project development & Industry Study – Structural Factors.
(H1.1, H2.1, H3.3, H4.1)
Week 4:
Major project development
Industry Study – Technical Factors.
(H1.2, H2.1, H3.3, H4.1)
Week 7: Major project development
Industry Study – OH&S issues
(H1.1, H2.1, H3.3, H4.1)
Week 8:
Major Project & Folio Continuous Assessment 1
Exam Revision
(H1.1, H1.2, H2.1, H3.1, H3.3, H4.1, H5.2, H7.1)
Week 9:
Half Yearly Exam
Week 10: Major project development
Timber Calculations, sizing & ordering
(H1.1, H2.1, H3.2, H3.3, H4.1)
Week 11: Major project development
(H3.1, H3.2, H4.3, H5.1, H5.2)
CBHS LEWISHAM TAS DEPARTMENT
Half Yearly Exam
Term 1 Week 9
Weighting: 15%
INDUSTRIAL TECHNOLOGY - HSC COURSE 2007 / 2008
SCOPE & SEQUENCE
TERM 2 – 2008
Sequence of Topics
Wk 1:
Major project development
Timber, selection, sizing & manufactured boards
(H2.1, H3.3, H4.1, H5.2, H6.2)
Wk 2:
Major project development
Fittings, mechanical fasteners and adhesives
(H2.1, H3.3, H4.1, H4.3, H5.2, H6.2)
Outcomes to be Assessed
Wk 3:
Major project development &
(H2.1, H3.3, H4.1, H5.2, H6.2)
Wk 4:
Major project development
Forest Industry Products
(H2.1, H3.3, H4.1, H4.3, H5.2, H6.2)
Wk 5:
Major project development
Processes, Tools & Machinery – Component manufacturing
(H2.1, H3.3, H4.1, H5.2, H6.2)
Wk 6:
Major project development - Processes, Tools & Machinery Carcass construction
(H2.1, H3.3, H4.1, H5.2, H6.2)
Wk 7:
Major project development - Processes, Tools & Machinery Framing & assembly techniques
(H2.1, H3.3, H4.1, H5.2, H6.2)
Wk 8:
Major Project & Folio Continuous Assessment 2
Processes, Tools & Machinery Laminating techniques
(H2.1, H3.3, H4.1, H5.2, H6.2)
Wk 9:
Major project development - Processes, Tools & Machinery Finishes & finishing techniques
(H2.1, H3.3, H4.1, H5.2, H6.2)
H1.1
Investigates industry through the study of businesses in
one focus area
H1.2
Identifies appropriate equipment, production and
manufacturing techniques and describes the impact of
new and developing technologies in industry
H2.1
Demonstrates proficiency in the use of safe working
practices and workshop equipment maintenance
techniques
H3.3
Applies design principles effectively through the
production of projects
H4.1
Demonstrates competence in practical skills appropriate
to the major project
H4.3
Critically applies knowledge and skills related to
properties and characteristics of materials/components
H5.2
Selects and applies appropriate documentation
techniques to project management
H6.1
Evaluates the characteristics of quality manufactured
products
H6.2
Applies the principles of quality and quality control
Wk 10: Major Project development
(H2.1, H3.3, H4.1, H5.2, H6.2)
CBHS LEWISHAM TAS DEPARTMENT
Assessment Tasks
3.
Industry Study
Written Report
Term 2 Week 5
Weighting: 15%
4.
Major Work
Continuous Assessment
Terms 1,2 & 3
Weighting: 40%
INDUSTRIAL TECHNOLOGY - HSC COURSE 2007 / 2008
SCOPE & SEQUENCE
TERM 3 – 2008
Sequence of Topics
Wk 1:
Wk 2:
Major project development
Revision for HSC Trial Exam
(H1.1, H1.2, H2.1, H3.1, H3.3, H4.1, H5.2, H7.1)
Major Project & Folio Continuous Assessment 3
Major Project & Folio due for submission Monday 28 July
Revision for HSC Trial Exam
(H1.1, H1.2, H2.1, H3.1, H3.3, H4.1, H5.2, H7.1)
Outcomes to be Assessed
H1.1
Investigates industry through the study of businesses in
one focus area
H1.2
Identifies appropriate equipment, production and
manufacturing techniques and describes the impact of
new and developing technologies in industry
H2.1
Demonstrates proficiency in the use of safe working
practices and workshop equipment maintenance
techniques
H3.3
Applies design principles effectively through the
production of projects
H4.1
Demonstrates competence in practical skills appropriate
to the major project
Wk 3:
Finalisation of Major Project and Folio & Revision for HSC Trial
Exam
(H2.1, H3.3, H4.1, H4.3, H5.2, H6.2)
Wk 4:
HSC Trial Exams
Wk 5:
HSC Trial Exams
H4.3
Critically applies knowledge and skills related to
properties and characteristics of materials/components
Wk 6:
Major Project & Folio Marking Commences
Review of exam technique
H5.2
Selects and applies appropriate documentation
techniques to project management
H6.1
Evaluates the characteristics of quality manufactured
products
H6.2
Applies the principles of quality and quality control
Wk 7:
Revision for HSC Exam Section I
Revise previous exams and complete
Topic worksheets
(H1.1, H1.2, H2.1, H3.1, H3.3, H4.1, H5.2, H7.1)
Wk 8:
Revision for HSC Exam Section II
Revise previous exams and complete
Topic worksheets
(H1.1, H1.2, H2.1, H3.1, H3.3, H4.1, H5.2, H7.1)
Wk 9:
Revision for HSC Exam
Revise previous exams and complete
Topic worksheets
(H1.1, H1.2, H2.1, H3.1, H3.3, H4.1, H5.2, H7.1)
Assessment Tasks
5.
HSC Trial Exam
Term 3 Week 4
Weighting: 15%