ACCESSORIES FOR ICP TYPE
THERMO TJA
TRACE, ADVANTAGE,
IRIS, ATMOMSCAN,
POLYSCAN
TORCHS
NEBULIZERS
SPRAY CHAMBERS
If you wish to use high quality products and save money
www.onlinecas.com
For further information, contact : +33 2 35 07 60 00 / Fax +33 2 35 70 64 39
E.Mail cas@onlinecas.com
COURTAGE ANALYSES SERVICES / 14 rue des Mouettes 76130 Mont Saint Aignan
Belgium distributor : LabAS sprl Rue du saule, 30 1090 Bruxelles tel : 32-2-420-0201 fax :
32-2-420-0138 philippe.vandenbussche@skynet.be
Maghreb distributor : Smarthecno, +212 222 638 21 Fax + 212 222 639 08 smarthecno@yahoo.fr
INDEX
OTHER PRODUCTS AVAILABLE ...................................................................................................................... 4
GENERALE PRESENTATION ............................................................................................................................ 6
 How to Order & Payment Terms ............................................................................................................ 7




Delivery Terms ....................................................................................................................................... 7
Guaranteed Money Back Performance Offer ......................................................................................... 7
Torch repair service ................................................................................................................................ 7
Trademarks ............................................................................................................................................ 7
W HY CHOOSE GLASS EXPANSION PRODUCTS? ......................................................................................... 8
 Quality by design .................................................................................................................................... 9
NEBULIZERS .................................................................................................................................................... 10
 How to choose the most suitable nebulizer for your application .......................................................... 10



Glass Expansion Nebulizer Designations...What do they all mean? ................................................... 10
Nebulizers for Aqueous and Organics Analyses .................................................................................. 11
Nebulizer for HF ..................................................................................................................................... 13
NEW ELUO : FOR NEBULIZER CLEANING ................................................................................................... 14
NEW CAPRICORN  : ARGON HUMIDIFIER ................................................................................................ 14
SPRAY CHAMBERS , QUALITY, UNIFORMITY AND EFFICIENCY ............................................................... 15
 How to choose the most suitable spray chamber for your application ................................................. 15






Tracey cyclonic chambers .................................................................................................................... 15
Twister cyclonic chambers ................................................................................................................... 16
Cinnabar cyclonic chambers ................................................................................................................ 16
Twinnabar cyclonic chambers ............................................................................................................. 16
WHY TO CHANGE YOUR RF COILS .................................................................................................. 18
ADVANTAGE OF GLASS EXPANSION RF COILS: ........................................................................... 18
NEW HELIX : O RING FREE NEBULIZER FITTING ! ...................................................................................... 18
TJA SERIES 2000-2400 .................................................................................................................................... 19
 Torch..................................................................................................................................................... 19


Spray chamber ..................................................................................................................................... 19
Nébulizers ............................................................................................................................................. 19
TJA 975, 9000, 61, 1100 ................................................................................................................................... 20
 Torch..................................................................................................................................................... 20


Spray chamber ..................................................................................................................................... 20
Nébuliseurs ........................................................................................................................................... 21
TJA IRIS, ATOMSCAN 16 & 25, ICAP& 61E, INTREPID, ADVANTAGE RADIAL, POLYSCAN, POEMS ..... 22
 Torches ................................................................................................................................................. 22



Fully demountable torch for Iris, Atomscan 16 et 25, Icap et 61E, Intrepid RADIAL .......................... 23
Spray chamber ..................................................................................................................................... 26
Kits TJA RADIAL .................................................................................................................................. 27
NEBULISEURS POUR TJA RADIAL ................................................................................................................ 29
 Nebulizers ............................................................................................................................................. 29
2
TJA TRACE, ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID? DUO .............................................. 32
 Torch TRACE, ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID ......................................... 32












Fully demountable torch for AXIAL IRIS TRASCAN TRACE ADVANTAGE ........................................ 32
Spray chamber for ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID DUO .......................... 35
Spray chamber without O Ring « HELIX SYSTEM » ........................................................................... 35
Spray chamber with O ring ................................................................................................................... 37
Torch for TRACE, ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID .................................... 39
Fully demountable torch for AXIAL IRIS TRASCAN TRACE ADVANTAGE........................................ 40
Kits for ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID ...................................................... 43
Torch for DUO ...................................................................................................................................... 43
Fully demountable torch for IRIS DUO ................................................................................................. 44
Kits for DUO ......................................................................................................................................... 46
Nébulizers for TJA AXIAL and DUO ..................................................................................................... 46
Rf Coil for axial, duo, ............................................................................................................................ 49
NEBULIZER AND CHAMBER CONNEXION .................................................................................................... 49
 Easy lock argon CONNECTOR............................................................................................................ 49
TEFLON TUBES AND CONNEXION FOR CHAMBERS .................................................................................. 50
 UNIFIT Connector ................................................................................................................................ 50

EzyLock for thermostated chamber ...................................................................................................... 50
O RING AND CONNEXION FOR TORCHS ..................................................................................................... 51
SAFETY CCESSOIRIES ................................................................................................................................... 51
RF COILS : GENERALITY ................................................................................................................................ 52
 Why to change your RF Coils ............................................................................................................... 52





Advantage of Glass Expansion RF Coils: ............................................................................................ 52
The role of the RF Coils........................................................................................................................ 52
Benefits of maintaining your RF Coils .................................................................................................. 53
advantage of Glass Expansion RF Coils .............................................................................................. 54
glass expansion Installation tool kit for coils......................................................................................... 55
3
OTHER PRODUCTS AVAILABLE
STANDARD AAS-ICP-GC ANALYTIKA exclusive distributor
 Primary CRM standards from CZECH METROLOGY INSTITUT
 Standards CRM AAS, ICP, IC
 Hight purity acids
 Standards AAS, ICP
 Matrix modifier
 Standards GC, GC/MS
 Standards on custom request
 Standard IC
Sample preparation
 Microwave digestion Berghof
 Réacteur de minéralisation sous-pression
 Distillateurs d’acides
 Distillateur d’HF
 Hotblock from Environmental Express
 SysTubes from Environmental Express
 Disposable fillters from Environmental Express
AAS PHOTRON exclusive distributor France, Benelux, Maggreb
 Hollow cathode lamps
 Super lamps
 Deuterium Lamps
 Graphite tube
ICP Glass Expansion Official Distributor
 Torch
 Nebulizor (concentric, V-Groove..)
 Chambers (Cyclonic, HF)
 Cones Spectron
MERCURY Analyseur Distributor ALTEC France, Benelux, Maggreb
 AMA 254 mercury analysor on liquids and solides without
digestion
TEFLON - PFA Labware
SAVILLEX Distributor
 Vials, jars
 Tubes, digestion tubes
 Digestion vessels
 Syringe. Filtration
Precious Metal
BIRMINGHAM METAL Distributor
 Boat crucible
 Electrodes
 Cruscibles, molds for FluoX
4
Ecotoxicology
Microbiology
LEMNATECH Distributor
exclusive in France
CHNOS
N2 / Protéines
Exclusif SÄNTIS
 Duckweed Test
 Daphnia Test
 Collembo Test
 Arabidopsis Test
 Numeration
 Identification
 Storage
 Capsules and boats (tin, silver.. )
 Copper oxide and reduced
 Catalyst
 Standards
 Quartz, metallic, ceramic tubes
Accessoires GC
BRECHBULHER Distributor
 Détecteur H2
 Sniffer
 CLSA
GC-GC/MS
ID ANALYTICAL Distributor
Exclusif Distributor USA-CANADA with Mass evolution BRECHBULHER
 Solid Phase Injector
 Needle injector
 Pyrolysor
 Complete solution for GC GC-MS
 AED Detectors
5
GENERALE PRESENTATION
C.A.S (Courtage Analyses Services) is proud to be design as a Glass Expansion official dealer. We
are very pleased to offer you this catalogue dedicated to your ICP model. As is consistent with our
ongoing commitment to provide the highest level of customer support possible, this catalogue is
intended to help simplify your task of selecting sample introduction components that are most
suitable to your ICP-OES and ICP-MS applications. Except items speciied in catalogue all products
are from Glass Expansion.
Glass Expansion catalogue represents the widest range of sample introduction components for ICP
emission and mass spectrometers. Today, Glass Expansion support both new and old instruments
for 13 different manufacturers, representing sample introduction systems for over 50 different ICPOES and ICP-MS models. The combination of listening to customers and innovative thinking has
seen Glass Expansion successfully overcome many of the commonly encountered application
issues even with the toughest samples. Innovative new designs include the high sensitivity
SeaSpray nebulizer, the low uptake MicroMist nebulizers, the high throughput Cinnabar minicyclonic spray chamber and the most recent Hydra-Trace kit that offers outstanding Hg detection on
limited sample volumes. Our quality, attention to detail and customer focus has not only attracted
the attention of world renowned experts with their publications, but also resulted in Glass Expansion
establishing itself as a major OEM supplier to the ICP manufacturers.
As always, we rely on your feedback. If you wish to provide any input on how we can improve this
catalogue or our products and services, please feel free to contact us.
Courtage Analyses Services
14 rue des Mouettes
76130 Mont Saint Aignan
Telephone: +33 2 35 07 60 00
Facsimile: +33 2 35 70 64 39
Email: cas@onlinecas.com
6

HOW TO ORDER & PAYMENT TERMS
For your convenience, you can place an order in any of the following ways:
Head Office
By Fax:
By Email:
By Mail:
+33 2 35 70 64 39
cas@onlinecas.com
Address To:
Courtage Analyses Services
14 rue des Mouettes
F-76130 Mont Saint Aignan
France
Don’t forget to include your order number along with the part numbers of the products you want to purchase.
Payment terms are strictly within 30 days from the date of invoice. We accept wire transfers and/or credit
cards (Visa Card)
For first order we request a pre-payment.

DELIVERY TERMS
Delivery is typically within 2-3 weeks of order receipt. We do keep a large number of items in stock so delivery
is usually faster. We use Priority Air-mails for Europe but you can request an other International Courier
service. However, if you have a preference for a different courier service, please advise us at the time you
place the order. The courier service will be charged to the person receiving the goods.

GUARANTEED MONEY BACK PERFORM ANCE OFFER
If you are not satisfied with any of our products, simply return the goods to us within 14 days and you will be
fully reimbursed.

TORCH REPAIR SERVICE
Damaged torch could be repaired. It is
particularly the case when external tube is
damage. You just have to return the torch to
us. We will return to manufacturer for
evaluation. If the torch can be repaired, work
will be done and we will let you inform about
cost. In case cost evaluation is too important
compared to a new one,
you will be
informed. Performance of repaired torch is
Repair delay are never warranty so be
careful to avoid your stock discontinuity.

TRADEM ARKS
Glass Expansion Pty Ltd has rights to the following trademarks:
Conikal, PolyCon, SeaSpray, MicroMist, VeeSpray, Cinnabar, Glass Expansion and the Glass Expansion
Logo.
Viton and Teflon are registered trademarks of E.I. duPont de Nemours & Co., Inc.
All company names listed are registered trademarks of their respective owners.
7
WHY CHOOSE GLASS EXPANSION PRODUCTS?
C.A.S recommande and distribue Glass Expansion (GE) products for Quality, Reliability and Innovation
Glass Expansion has been manufacturing sample introduction components for ICP optical emission and mass
spectrometers since the early 1980s. Today we support both new and old instruments for 16 different
manufacturers, representing sample introduction systems for over 50 different ICP-OES and ICP-MS models.
Glass Expansion products are endorsed and supplied as standard products by major ICP manufacturers. Our
products are widely used and embraced by recognised analysts in the ICP industry, and have come to be
recognised as 'industry standard' products. Glass Expansion's ability and expertise in manufacturing not only
high quality nebulizers, but also spray chambers, torches and other ICP componentry, means that we
understand the relationships between these products intimately. This often enables us to offer customers a
complete solution to their ICP sample introduction needs.
We believe that quality by design, production and service are paramount in product quality. Most vital is the
quality of our designs. One can have the best methods of production and the highest quality finish, but if the
design is not of the highest possible quality, then the product has not reached its full potential. Our
commitment to R & D and product development has enabled us to produce innovative design solutions...
1. Did you know that Glass Expansion was the first company to introduce the 'Tracey' cyclonic spray chamber,
which has since revolutionized the design and manufacture of cyclonic style spray chambers? That's right,
before the advent of the cyclonic spray chambers, Scott style spray chambers were the norm. The design of
our cyclonic spray chambers helped analysts to achieve sensitivity gains, reduced washout times and matrix
effects that were not possible before.
2. Our fully demountable torches, with all components being removable and replaceable, are also an industry
first. They've helped to make operating and using torches more efficient and cost effective. A great feature of
this torch is that any of the 3 individual tubes can be replaced whilst maintaining accurate alignment and
concentricity. All replacement components are so precisely manufactured that no further optimization is
required once a tube has been replaced. Changing torch tubes is so quick and easy, reducing down time and
increasing instrument productivity.
3. How many other nebulizer manufacturers do you know who manufacture nebulizers to operate optimally at
the gas pressures and flows specified by the ICP instrument manufacturer? Instead of manufacturing
nebulizers which operate within a certain gas pressure and flow range, we go the extra distance in our strive
for quality... We manufacture our nebulizers according to your ICP specifications because we understand how
critical these specifications can be. We also understand that your time is important and that you shouldn't
have to waste it on recalibrating your instrument each time you change your nebulizer.
Reproducibility of analytical results in ICP analyses is of paramount importance. In an environment where a
small change or inconsistency in a product or variable can result in a dramatic change in analytical results,
design quality and reliability is essential. Glass Expansion has developed unique and proprietary
manufacturing methods which have resulted in the production of components of high mechanical strength and
micron-level dimensional accuracy to satisfy the narrowest of analytical specifications, each and every time.
Our products are recognized world wide for their excellent precision, cost effectiveness and reproducibility of
results. This reproducibility is manifested in 3 ways:



Short-term background and RSD's are lower
Long-term drift is lower
Analytical result spread, measured for successive test batches of Glass Expansion components, is
narrower.
Our design and manufacturing processes ensures reliability in the performance of our products, which helps
you minimize variables which can affect your analyses. Glass Expansion's success has been built on a
foundation of empathy towards our customers and their needs. Customer needs are the crux of our product
design quality, reliability and innovation. Our recent responses to customers needs have lead to the
development of user friendly solutions such as our quick connect EzyFit and EzyLok fittings for nebulizers,
GazFit connectors for torches, and EzyLok fittings for jacketed spray chamber coolant hoses. We pride
ourselves on being attentive to our customers' needs.
8
.

QUALITY BY DESIGN
Uniformity is paramount
Using advanced manufacturing technology and the most stringent quality control systems, the Glass
Expansion range of nebulizers, spray chambers and torches have set new standards answering the analytical
needs for long-term performance and reliability covering a diverse range of ICP and ICP-MS applications.
Pneumatic nebulizers that are used for liquid samples, by far the most common type, produce a spray of liquid
particles with a wide range of sizes - a 'polydisperse' spray. The size distribution of this spray is governed
intimately by the geometry of the region of gas-sample interaction. If this region deviates from its intended
annular or circular shape, whether by manufacturing variability, mechanical resonances, surface modifications
such as erosion or by dimensional changes with age processes, the size distribution of the spray will alter and
with it the ICP analytical results. Glass Expansion's designers have made a direct attack on the 'Achilles-Heel'
problem of sample introduction (1) by devising components generally - and nebulizers in particular - that
follow the first law of manufacturing - that everything produced should always be exactly the same. Systematic
control at every stage of our production process guarantees that you always get the same high quality
product.
For nebulizers, this requires designs with high mechanical strength, micron-level dimensional accuracy of
orifices and surface finishes that are repeatable. For concentric glass nebulizers in particular, this means that
heat treatments of the glass have been kept to a minimum and that the central capillaries are shaped at low
temperatures. This unique approach by Glass Expansion's designers result in nebulizers that:
1. Give the same analytical results, to within a standard deviation of 1%, for a statistically significant test batch
of nebulizers and where the test instrument drift can be shown to be negligible within the same test period,
and
2. Enable ICP's to achieve 'Rank-5' short term and long term background RSD's, by tests outlined by Mermet
and Poussel in their 1995 review of ICP figures of Merit (2) These 'Rank-5' figures represent best ICP
performance figures that are being achieved in the market place of the new century. When Glass Expansion
nebulizers are used, RSD values of 0.5% or higher are indicative of instabilities from other sources - whether
they be badly adjusted sample pumps, torch RF power instability or simply the photon noise of light-limited
spectrometers.
(1) R.F. Browner and A.W. Boorn, Sample Introduction: the Achilles' Heel of Atomic Spectroscopy, Analytical
Chemistry, Vol. 56, pp. 787A-798A (1984)
(2) J.M. Mermet and E. Poussel, ICP Emission Spectrometers: 1995 Analytical Figures of Merit, Applied
Spectroscopy, Vol. 49, No. 10, pp 12A-18A (1995): see Table V.
9
NEBULIZERS

HOW TO CHOOSE THE MOST SUITABLE NEBULIZER FOR YOUR APPLICATION

GLASS EXPANSION NEBULIZER DESIGNATIONS...WHAT DO THEY ALL MEAN?
ARxx-yy-ZZnnnE
AR argon gas operated nebulizer
xx
the nominal argon pressure in psig
yy
the argon flow at nominal pressure, in L/min eg. 07=0.7L/min
ZZ nebulizer model type:
FC = Conikal nebulizer fitted with EzyFit
FS = Slurry nebulizer fitted with EzyFit
FSS = SeaSpray nebulizer fitted with EzyFit
FM = MicroMist nebulizer fitted with EzyFit
QV = Quartz VeeSpray v-groove nebulizer
CV = Ceramic VeeSpray v-groove nebulizer
CP = PolyCon Polyimide HF resistant nebulizer
PFA = OpalMist PFA HF resistant nebulizer
nnn aspirated uptake at nominal pressure, in ml/min
eg. FC3 = 3ml/min, FM04 = 0.4ml/min, CP005 = 0.05ml/min
E
Letter "E" indicates that the nebulizer is supplied with the
EzyLok argon connector.
10

NEBULIZERS FOR AQUEOUS AND ORGANICS ANALYSES
SeaSpray - the high dissolved solids nebulizer
The SeaSpray concentric nebulizer offers outstanding nebulization efficiency for trace level analyses. It offers freedom
from clogging while nebulizing solutions to the limit of solubility of most mineral salts, and conferring significant sensitivity
gains.
 Material: Borosilicate glass
 High physical reproducibility ~ 1%
 TDS tolerance, typically up to 20%
 High tolerance to particulates, typically up to 75um
 Low RSD's due to highly accurate construction
 Standard available uptake: 2ml/min. 1ml/min uptake available on request.
All SeaSpray nebulizers listed in this website are supplied with:
Eg. AR30-1-FSS2E SeaSpray
1 x EZT-075 EzyFit connector (sample tube 0.75mm ID x 1.3mm OD)
Nebulizer with EzyFit Sample
1 x SNP-1 Nebulizer Hose Clip (1 clip)
Connector and EzyLok side arm
MicroMist - the low uptake nebulizer for all ICPs
The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. It makes
routine ICP-MS Hg determinations possible and reduces matrix effects when used with Glass Expansion's Cinnabar spray
chamber.
 Material: Borosilicate glass
 High physical reproducibility ~ 1%
 TDS tolerance, typically up to 15%
 Low RSD's due to highly accurate construction
 Standard available uptake: 0.05, 0.1, 0.2, 0.4 & 0.6ml/min
All MicroMist nebulizers listed in this website are supplied with:
Eg. AR30-1-FM02E
1 x SNP-1 Nebulizer Hose Clip (1 clip)
MicroMist Nebulizer with
MicroMists with sample uptakes 0.2 - 0.6ml/min are fitted with:
EzyFit Sample Connector and
an EzyFit connector with 1.3mm OD x 0.50mm ID x 700mm long sample tubing.
EzyLok side arm
MicroMists with sample uptakes 0.05 - 0.1ml/min are fitted with:
an EzyFit connector with 1.3mm OD x 0.25mm ID x 700mm long sample tubing.
Conikal - an industry standard
The Conikal concentric nebulizer gives the most reproducible results for standard ICP analyses. It represents the choice
nebulizer for high precision, routine aqueous and organic applications.
 Material: Borosilicate glass
 High physical reproducibility ~ 1%
 TDS tolerance, typically up to 5%
 High tolerance to particulates, typically up to 75um
 Low RSD's due to highly accurate construction
 Standard available uptake: 1, 2 & 3ml/min
All Conikal nebulizers listed in this website are supplied with:
1 x EZT-075 EzyFit connector (sample tube 0.75mm ID x 1.3mm OD)
1 x SNP-1 Nebulizer Hose Clip (1 clip)
Slurry - for slurries or suspensions
The Slurry glass concentric nebulizer is ideal for specialised applications requiring the aspiration of slurries or
suspensions. It's capillary bore is 50% larger than standard concentrics which reduces the possibility of particle blockage,
while giving excellent signal stability.
 Material: Borosilicate glass
 High physical reproducibility ~ 1%
 TDS tolerance, typically ~ 1%
 High tolerance to particulates, typically up to 150um
 Low RSD's due to highly accurate construction
 Slurry nebulizers have a natural liquid uptake of 6ml/min but operates
best between 1.5 - 2.5ml/min
All Slurry nebulizers listed in this website are supplied with:
1 x EZT-075 EzyFit connector (sample tube 0.75mm ID x 1.3mm OD)
1
x SNP-1 Nebulizer Hose Clip (1 clip)
11
Quartz VeeSpray - handles high particle and TDS loads best
This VeeSpray nebulizer is made from quartz. It provides reproducible performance when working with samples
containing large particulates. It has the same 6mm diameter as the standard concentric nebulizer.
 Material: Quartz
 High physical reproducibility ~ 1%
 TDS tolerance, typically up to 30%
 High tolerance to particulates, typically up to 300um
 Must be pumped - does not self aspirate
 Design uptake range: 0.6 - 3ml/min. Operates best between 1.5 - 2.5ml/min
All VeeSpray nebulizers listed in this website are supplied with:
700mm length of VSS-075, VeeSpray sample tubing (sample tube 0.75mm ID x 1.3mm OD)
1 x SNP-1 Nebulizer Hose Clip (1 clip)
The EzyFit Connector
Glass Expansion developed the EzyFit connector to offer a no-fuss method of connecting sample uptake tubes to
nebulizer. EzyFit connectors are simple to use, reduce washout times, and eliminate dead volume. The connector is
supplied in packs of 10 and comes with sample tubes of 3 commonly required internal diameters:
EZT-025 EzyFit Connector 0.25mm ID x 1.3mm OD x 700mm long
EZT-050 EzyFit Connector 0.50mm ID x 1.3mm OD x 700mm long
EZT-075 EzyFit Connector 0.75mm ID x 1.3mm OD x 700mm long
EzyFit connectors are made to be used only with Glass Expansion glass concentric nebulizers that have the letter 'F' in
their designation (eg. AR30-07-FSS2E), because these nebulizers are made with a sample inlet tube that hNebulizers
such as the AR30-1-C1E Conikal, the AR30-1-S6E Slurry nebulizer and the AR30-1-SS2E SeaSpray would therefore not
be compatible with EzyFit connectors. The user would be required to make his/her own sample tube connection for use
with these 'standard connection' nebulizers. as a very precise bore.
Notes on Nebulizer Uptake
When a Glass Expansion nebulizer is designed for a specified uptake by aspiration, the nebulizer's best short-term
stability will always be obtained at an uptake close to that 'design aspiration level'. Thus for a 'PFA04' OpalMist or an
'FM04' MicroMist, they will be best used at an uptake between ~0.3ml/min and ~0.6ml/min. The reasons for this are found
in the fundamental properties of liquid dispersion from narrow capillaries under the action of turbulent gas jets.
Another point to note is that it would also be difficult to 'force' a nebulizer to a higher uptake by pumping, since pump
pressures required would rapidly rise to very high levels. Thus while an AR30-1-CV6 'VeeSpray' nebulizer could be
pumped to an uptake of 6ml/min, it would be impractical to try the same pumped uptake rate with an AR30-1-FM02
'MicroMist'...indeed, it might burst the pump tube connections. The laws governing liquid flows indicate that there is a 4th
power relationship between applied pressure and the diameter of a tube through which a liquid is pumped by that
pressure.
Unfortunately in one way, there is a law of diminishing returns (for sensitivity) that applies as the uptake of a nebulizer is
increased: this means that uptake (and of course pressure in the pumped sample tubes) can often be lowered without
losing much sensitivity - particularly if the volume of the spray chamber is small. Such an uptake reduction can be made
by simply reducing the internal diameter (ID) of peristaltic pump tube. Reducing the ID by a factor of 2 will reduce the
uptake by a factor of 4, and thus the pressure in the tube by more than 10, if the pump roller speed is unchanged
12

NEBULIZER FOR HF
PolyCon - for routine high precision HF analyses
The PolyCon concentric nebulizer represents the choice nebulizer for high precision analyses involving samples digested
in HF. The PolyCon has been used successfully in ICP desolvators such as the MCN-6000, where high temperatures are
encountered. It has become a favourite in the semi conductor industry, and has enabled analysts to produce accurate (r =
0.9998) calibration curves for low-ppt levels of Na, K, Fe and Ca in 30% hydrogen peroxide.
 Material: HF Resistant Polyimide
 High physical reproducibility ~ 2%
 High tolerance to particulates, up to 75um depending on uptake
 TDS tolerance, typically ~5%
 Low RSD's due to concentric geometry
 Uses only standard ICP argon supply pressures
 Standard 6mm size fits standard cyclonic spray chambers. Adaptors are available for Scott type spray chambers
 Standard available uptakes: 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 2 & 5ml/min for samples with large particulates
All PolyCon nebulizers listed in this website are supplied with:
1 x SNP-1 Nebulizer Hose Clip (1 clip)
PolyCons with sample uptakes 0.05 - 0.1ml/min are supplied with 1.3mm OD x 0.25mm ID x 700mm long sample tubing.
PolyCons with sample uptakes 0.2 - 0.8ml/min are supplied with 1.3mm OD x 0.50mm ID x 700mm long sample tubing.
PolyCons with sample uptakes 2 - 5ml/min are supplied with 1.3mm OD x 0.75mm ID x 700mm long sample tubing.
OpalMist - ideal for the geochemistry & semiconductor industry
The OpalMist PFA concentric nebulizer represents the choice nebulizer for high precision analyses involving analyses
requiring high chemical resistancy to HF, alkalis and organics. It also provides excellent results for trace analyses.
 Material: PFA
 High physical reproducibility ~ 3%
 Strong and consistent self-aspiration
 High tolerance to particulates, up to 75um depending on uptake
 TDS tolerance, typically up to 30%
 Low RSD's due to concentric geometry
 Uses only standard ICP argon supply pressures
 Standard 6mm size fits standard cyclonic spray chambers. Adaptors are available for Scott type spray chambers
 Standard available uptakes: 0.05, 0.1, 0.2, 0.4, 0.6 & 2ml/min
All OpalMist nebulizers listed in this website are supplied with:
1 x SNP-1 Nebulizer Hose Clip (1 clip)
OpalMists with sample uptakes 0.05 - 0.1ml/min are supplied with 1.3mm OD x 0.25mm ID x 700mm long sample tubing.
OpalMists with sample uptakes 0.2 - 0.8ml/min are supplied with 1.3mm OD x 0.50mm ID x 700mm long sample tubing.
OpalMists with sample uptakes 2 - 5ml/min are supplied with 1.3mm OD x 0.75mm ID x 700mm long sample tubing
Ceramic VeeSpray - handles high particle and TDS loads best
The Ceramic VeeSpray nebulizer is made from alumina ceramic, making it ideal for HF analyses. It provides reproducible
performance when working with samples containing large particulates. It has the same 6mm diameter as the standard
concentric and the Alumina material makes it the most robust and abrasion resistant ICP nebulizer.
 Material: 99.8% Alumina Ceramic
 High physical reproducibility ~ 1%
 TDS tolerance, typically up to 30%
 High tolerance to particulates, typically up to 300um
 Must be pumped - does not self aspirate
 Design uptake range: 0.6 - 3ml/min. Operates best between 1.5 - 2.5ml/min
All Ceramic VeeSpray nebulizers listed in this website are supplied with:
700mm length of VSS-075, VeeSpray sample tubing (sample tube 0.75mm ID x 1.3mm OD)
1 x SNP-1 Nebulizer Hose Clip (1 clip)
13
Glass Expansion Eluo to clean your nebulizer
NEW ELUO : FOR NEBULIZER CLEANING
The Eluo is available for Glass Expansion concentric glass and HF-resistant nebulizers.
Cleaning your nebulizer is as easy as 1, 2, 3.
1. Fill your Eluo with Methanol.
2. Insert your nebulizer, tip first, into the Eluo.
3. Clean your nebulizer by pressing the Plunger down.
Particle build-up in a nebulizer capillary and tip causes sample flow to be constricted, thereby reducing
nebulizer efficiency and performance. Previously there was no simple way to effectively clean and unblock
nebulizers. Now, blocked nebulizers can be safely and easily restored to optimum performance with a
revolutionary new cleaning instrument - the Eluo.
The Eluo is designed to efficiently deliver a cleanser through the nebulizer capillary to dislodge particle buildup and thoroughly clean the nebulizer. One simple action does it all. No more messy procedures, waiting
overnight or shattered nebulizers in ultrasonic baths.
Use the Eluo regularly to maintain nebulizer performance and prolong nebulizer life. The answer to cleaning
your nebulizers is so simple, every lab should have one - the Eluo.
Références
70-ELUO
70-ELUO-OP
703-0070
Description
Eluo Nebulizer Cleaner (glass concentric nebulizers)
Eluo HF Nebulizer Cleaner (OpalMists & PolyCons)
Eluo Plunger
703-0058
Eluo Barrel
703-0069
Eluo Nebulizer Holder (glass concentric nebulizers)
703-0074
Eluo HF Nebulizer Holder (OpalMists & PolyCons)
70-0806
Eluo O-Ring Kit (2 sets)
Finally, a worry free ICP Argon Humidifier.
NEW CAPRICORN  : ARGON HUMIDIFIER
The Argon Humidifier is commonly used in
ICP analyses involving samples with high
dissolved solids concentration. Helping to
prevent salt build-up inside the sample
introduction system, the Argon Humidifier
allows uninterrupted and maintenance free
operation. Glass Expansion is pleased to
introduce the Capricorn - Combining ease of
operation, high performance and safety.





The rugged and durable plastic
casing enhances safety.
The built-in pressure indicator
serves as a diagnostic so you
always know the sample
introduction system is operating
Capricorn without bypass,
properly.
Capricorn with bypass, P/N
P/N 70-808-1000
An optional easy-to-use bypass
70-808-1226
toggle allows you to take the
Capricorn off-line without disconnecting argon lines.
Maximum and minimum fill marks ensure that you are always operating under optimum conditions.
A rugged bubbling frit ensures maximum saturation of the argon
14
SPRAY CHAMBERS , QUALITY, UNIFORMITY AND EFFICIENCY

HOW TO CHOOSE THE MOST SUITABLE SPRAY CHAMBER FOR YOUR APPLICATION

TRACEY CYCLONIC CHAMBERS
Tracey cyclonic - an industry standard
The Tracey cyclonic spray chamber is Glass Expansion's standard glass cyclonic spray chamber. It gives the best
sensitivity, reproducibility and lowest memory effects for standard ICP analyses.
 Material: Borosilicate glass
 Volume: 50ml
 High sensitivity and reduced matrix effects
 Physical reproducibility ~1%
 Active scouring of internal surfaces by sample
 Faster washout than older coaxial chamber designs
 Low RSD's due to highly accurate construction
 Positive stop for reproducible nebulizer insertion
 Application uptake range 0.2 to 3.0ml/min
20-809-0224HE
Jacketed Tracey spray chamber (borosilicate glass material)
The Jacketed Tracey spray chamber is made with an external jacket for the
introduction of coolant for temperature control. Thermostatting to constant
temperature helps ensure highly reproducible results and long term stability.
Can also be cooled to suppress volatilization, allowing the direct aspiration of
highly volatile solvents such as naphtha and petrol/gasoline.
20-809-0276HE
HF resistant Tracey spray chamber
Made from HF resistant Polypropylene, the HF resistant Tracey is ideal for use with the
PolyCon, OpalMist or Ceramic VeeSpray nebulizers
20-809-0220
15

TWISTER CYCLONIC CHAMBERS
Twister cyclonic - reduces solvent load
The Twister cyclonic spray chamber features a central transfer tube which acts as a secondary particle separator helping
separate larger aerosol particles from the sample. This reduces solvent load in
the plasma without compromising detection limits.
 Material: Borosilicate glass
 Volume: 50ml
 Physical reproducibility ~1%
 Low RSD's - highly accurate construction similar to Tracey cyclonic,
except with central transfer tube
 Application uptake range 0.2 to 3.0ml/min
20-809-0285HE
Jacketed Twister spray chamber (borosilicate glass material)
The Jacketed Twister spray chamber is made with an external jacket for the
introduction of coolant for temperature control. Thermostatting to constant
temperature helps ensure highly reproducible results and long term stability.
Can also be cooled to suppress volatilization, allowing the direct aspiration of
highly volatile solvents such as naphtha and petrol/gasoline. Recommended
for analyses of organics samples.

20-809-0313HE
CINNABAR CYCLONIC CHAMBERS
Cinnabar Cyclonic - the low volume spray chamber for all ICPs
The Cinnabar spray chamber is a mini-cyclonic spray chamber which gives good
sensitivity at very low uptakes. The Cinnabar's design and low volume is ideal for
the reduction of memory and matrix effects and very fast washout.
 Material: Borosilicate glass
 Volume: 20ml
 Physical reproducibility ~1%
 Matrix effects 5 times lower than with coaxial chambers
 Low RSD's due to highly accurate construction.
 Positive stop for reproducible nebulizer insertion
 Application uptake range ~20 to 600 microlitres/min
 Ideal for use with MicroMist nebulizers
Jacketed Cinnabar spray chamber (borosilicate glass material)
The Jacketed Cinnabar spray chamber is made with an external jacket for
the introduction of coolant for temperature control. Thermostatting to
constant temperature helps ensure highly reproducible results and long term
stability. Can also be cooled to suppress volatilization, allowing the direct
aspiration of highly volatile solvents such as naphtha and petrol/gasoline.
Ideal for use with MicroMist nebulizers
20-809-0164HE
20-809-0207HE
HF resistant Cinnabar spray chamber
Made from HF resistant Polypropylene, the HF resistant Cinnabar is ideal for use
with the low-uptake PolyCon and OpalMist nebulizers.

TWINNABAR CYCLONIC CHAMBERS
Twinnabar cyclonic - low volume, low solvent load
The Twinnabar cyclonic spray chamber is a low volume spray chamber with a
central transfer tube (or baffle), combining the benfits of the Twister and the
Cinnabar. It combines excellent precision with a very fast washout.
 Material: Borosilicate glass
 Volume: 20ml
 Physical reproducibility ~1%
 Low RSD's due to highly accurate construction
 Application uptake range 0.2 to 3.0ml/min
20-808-0313
20-809-0261HE
16
Nebulizer adaptors for glass Tracey and Twister
spray chambers with o'ring seal
All glass Tracey and Twister spray chambers shown in
this website with an o'ring seal nebulizer adaptor, come
standard with nebulizer adaptor P/N 21-808-0256. This
adaptor is suitable for use with 6mm glass concentric
nebulizers. Nebulizer adaptor P/N 21-808-0257 is
required when using these glass Tracey and Twister
spray chambers with VeeSpray, OpalMist and PolyCon nebulizers .
Nebulizer adaptors for glass Cinnabar and Twinnabar spray chambers with o'ring seal
All glass Cinnabar and Twinnabar spray chambers
shown in this website with an o'ring seal nebulizer
adaptor, come standard with nebulizer adaptor P/N
21-808-0259. This adaptor is suitable for use with
6mm glass concentric nebulizers. Nebulizer adaptor
P/N 21-808-0944 is required when using these glass
Cinnabar and Twinnabar spray chambers with
OpalMist and PolyCon nebulizers
Nebulizer adaptors for HF Tracey spray chambers
All HF Tracey spray chambers come standard with nebulizer adaptor P/N 21-808-0257. This
adaptor is suitable for use with VeeSpray, OpalMist and PolyCon nebulizers. Nebulizer
adaptor P/N 21-808-0256 is required when using HF Tracey spray chambers with 6mm
glass concentric nebulizers.
Nebulizer adaptors for HF Cinnabar spray chambers
All HF Cinnabar spray chambers come standard with nebulizer adaptor P/N 21-808-0944.
This adaptor is suitable for use with OpalMist and PolyCon nebulizers. Nebulizer adaptor P/N 21-808-0259 is required
when using HF Cinnabar spray chambers with 6mm glass nebulizers.
The Helix - o'ring free nebulizer fitting
Most ICP spectrometers rely on an o'ring seal between the nebulizer and the spray chamber. However, even the most
chemically resistant o'rings are prone to wear and tear and require regular replacement. They also tend to bond to a glass
nebulizer, making the nebulizer difficult to remove. To eliminate these problems, Glass Expansion has developed Helix the user friendly nebulizer fitting.




No more tedious o'ring replacement
Totally inert interior surface
Smooth release/lock mechanism seals the chamber
Positive stop to ensure correct nebulizer position
Helix fittings can only be used with Glass Expansion spray chambers
incorporating the Helix side arm. They cannot be used with spray
chambers designed with on o'ring seal.
Part numbers for Helix spray chambers can be identified by the letters HE at the end, as in 20-809-0224HE.
The UniFit connector
For your convenience and safety, each Glass Expansion spray chamber with
standard 4mm drain tube is supplied with a UniFit connector. The UniFit connector
efficiently connects a 0.75mm ID x 1.3mm OD drain tube to the spray chamber.
To order spare UniFit connectors, order P/N UFT-075 for a pack of 3 connectors
17
Glass Expansion RF Coils - represent the highest
quality in design and manufacturing









WHY TO CHANGE YOUR RF COILS
Regular replacement of corroded coils reduces the load on the RF generating system
Changing corroded coils increases enery transfer, resulting in a more robust plasma and
generally higher analytical line intensities.
ADVANT AGE OF GLASS EXPANSION RF COILS:
High quality and consistent plating of our coils promotes
extended coil life
Each coil is supplied on a plastic former ensuring correct
dimensions and easier installation
Each coil is supplied in a special protective container to ensure correct dimensions are
maintained, and the coil arrives corrosion free
orrect alignment of the coil with respect to the torch body reduces devitrification of the outer
tube
Reusable alignment tools ensure correct installation every time. Our CD with Do-It-Yourself
instructions saves time
For more information see end of catalogues
.
Glass Expansion O'ring Free Nebulizer Fitting
NEW HELIX : O RING FREE NEBULIZER FITTING !
Most ICP spectrometers rely on an o'ring seal between the nebulizer and the spray chamber. However, even
the most chemically resistant o'rings are prone to wear and tear and require regular replacement. They also
tend to bond to a glass nebulizer, making the nebulizer difficult to remove. To eliminate these problems, Glass
Expansion has developed Helix - the user friendly nebulizer fitting.




No more tedious o'ring replacement
Totally inert interior surface
Smooth release/lock mechanism seals the chamber
Positive stop to ensure correct nebulizer position
Helix fittings can only be used with Glass Expansion spray
chambers incorporating the Helix side arm. They cannot be used
with spray chambers designed with on o'ring seal.
Part numbers for Helix spray chambers can be identified by the
letters HE at the end, as in 20-809-0224HE.
18
TJA SERIES 2000-2400

T O RCH
Réf
PRECISION
Réf
TJA
Désignation
250-08
190400-73
Torch ICP-ES
250-25
190400-75
Torch Bonnet

SPRAY CHAMBER
Réf
PRECISION
Réf
TJA
Désignation
250-16
127947-00
Spray chamber standard
250-30
003952-00
Aerosol Baffle
285-01
Rinse Station 1 port, 12 mm
285-02
Rinse Station 2 port, 12 mm
285-03
Rinse Station 2 port, 23 mm

SPRAY CHAMBER
NEBULIZERS
Ref CAS
Ref TJA
500-92
126989-00
Cross Flow nebulizer
520-36
133202-50
O-ring kit for 500-92
520-38
TORCHE MONO BLOC
Argon inlet fitting for 500-92
19

Réf
250-05
250-05A
250-06
250-07
250-09
TJA 975, 9000, 61, 1100
T O RCH
Réf TJA
190400-54
Désignation
TORCHEE
Demontable torch with removable 1mm tip
Demontable torch with extra removable 1 mm tip
Demontable torch with removable 1.25 mm tip
Demontable torch with removable 1.5 mm tip
Demontable torch with removable 1.7 mm tip
260-55
HF/CR torch with removable tip High solid
260-82
HF/CR torch body for alumina /Sapphire Injector
260-81
136436-02
Alumina injector tube 1.5
260-85
Teflon injector holder
260--62
TJA Standard Low Flow Torch
250-25
190400-75
Torch « bonnet »
250-21
Torch extension
250-22
Torch extension with optical port

Réf
SPRAY CHAMBER
Réf TJA
Désignation
250-12
190400-65 Spray chamber standard
250-30
003952-00 Aerosol Baffle for 250-12 and 250-18
250-18
Spray chamber Curved drain
250-20
Spray chamber open ends, water cooled
250-20R
O ring for Scott spray chamber, water cooled
285-01
Rinse Station 1 port, 12 mm
285-02
Rinse Station 2 port, 12 mm
20
285-03

Rinse Station 2 port, 23 mm
NEBULISEURS
Ref CAS
Ref TJA
500-92
126989-00
Cross Flow nebulizer
520-36
133202-50
O-ring kit for 500-92
520-38
Connection ragon pour 500-92
21
TJA IRIS, ATOMSCAN 16 & 25, ICAP& 61E, INTREPID, ADVANTAGE RADIAL,
POLYSCAN, POEMS

TORCHES
Ref PRECISION
Ref GE
275-06
Réf
TJA
Désignation
126432-02
Torch base ceramic, « Hight/low Flow »
with 1.5 mm injector
275-06 W
126432-02
Torch base ceramic, « Hight/low Flow »
with 1.5 mm injector, wear metal
275-06 W/O
126432-02
Torch base ceramic, « Hight/low Flow »
without injector
129432-01
Torch base ceramic, « Hight Flow »
with 1.5 mm injector
30-808-1139
127179-01
Torch base ceramic, « Hight Flow »
with 1.5 mm alumina injector
275-07W/O
126440-01
Torch base ceramic, « Hight Flow »
without injector
125124-01
Torch base ceramic, « Hight Flow »
with 1 mm injector
126440-01
Torch base ceramic, « Hight Flow »
without injector
125407-01
Quartz injector 1 mm
125407-00
Quartz injector 1.5 mm
136502-01
136502-02
Quartz injector 2.0 mm
Quartz injector 2.4 mm
Alumina injector 1.0 mm
136436-01
Alumina injector 1.5 mm
30-808-1136
275-07
30-808-1137
275-07HF
275-08
30-808-1138
275-08W/O
30-808-1140
250-40
250-41
31-808-8903
250-42
250-43
260-84
260-83
31-808-8904
275-20
TJA Teflon adapter, torch
275-25
085207-00
Anti arc Cap
275-26
085207-01
Anti arc Cap, flat edge
275-35
Argon fittingf for ceramic base torch
22








FULLY DEMOUNTABLE TORCH FOR IRIS, ATOMSCAN 16 ET 25, ICAP ET 61E, INTREPID
RADIAL
Highly accurate construction
Performance equal to or better than 1-piece torches
All components removable and replaceable
Outer, Inner and Injector Tubes separately replaced in seconds
Lowest running costs and ICP downtime
Ceramic tubes available - reduces silicon background, low RSDs, long tube life
Special Outer and Inner Tubes for Laser Ablation and Research
Constructively versatile, Glass Expansion Fully Demountable Torches can be quickly and easily assembled
and disassembled for storage and cleaning. Instead of storing a variety of torches for different applications,
simply change the torch tubes to suit your application needs. Torch design consistency means that no
realignment is needed.
Interchangeable injector, inner and outer tubes means you no longer have to throw out an entire torch once a
tube has deteriorated. Simply replace the tubes. Quartz and alumina injectors in varying internal diameters
are conveniently available. Ceramic tubes are also available for HF analyses and Laser Ablation and
Research.
Ref
PT2000 DEMOUNTABLE TORCH - GLASS EXPENSION
30-808-0041
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0517
31-808-9199
31-808-9200
31-808-8917
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene Ball Joint Adaptor
Quartz Outer Tube
Quartz Inner Tube
Tapered Quartz Injector 1.8mm
PT2000 TJA Radial
Torch (all quartz
tubes)
70-EZG-CLOTH EzyGlide Lubricated Cloth
30-808-0038
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0517
31-808-9199
31-808-9200
31-808-0012
70-EZG-CLOTH
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene Ball Joint Adaptor
Quartz Outer Tube
Quartz Inner Tube
Tapered Alumina Injector 1.8mm
EzyGlide Lubricated Cloth
PT2000 TJA Radial
Torch (HF resistant
alumina injector)
30-808-0037
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0517
31-808-0024
31-808-0018
31-808-0012
70-EZG-CLOTH
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene Ball Joint Adaptor
Syalon Outer Tube
Alumina Inner Tube
Tapered Alumina Injector 1.8mm
EzyGlide Lubricated Cloth
PT2000 TJA Radial
Torch (all ceramic
tubes)
23
Ref
PT2000 Demountable Torch Product Options
31-808-0296
31-808-0310
31-808-8917
31-808-0356
31-808-0601
31-808-0602
31-808-0594
31-807-0018
Tapered Quartz Injector 1.0mm
Tapered Quartz Injector 1.5mm
Tapered Quartz Injector 1.8mm
Tapered Quartz Injector 2.0mm
Capillary Quartz Injector 1.0mm
Capillary Quartz Injector 1.5mm
Capillary Quartz Injector 1.8mm
Polypropylene Ball Joint Adaptor
31-808-9199
Quartz Outer Tube
31-808-9200
Quartz Inner Tube
31-808-8924
Extended Quartz Outer Tube
31-808-0307
14131700
Quartz Outer Tube - Slotted
70-0041
O'ring Kit
31-808-0384
Tapered Alumina Injector 1.5mm
31-808-0012
Tapered Alumina Injector 1.8mm
31-808-0024
Syalon Outer Tube
31-808-0018
Alumina Inner Tube
70-0038
O'ring Kit
Ref
31-808-0472
Spare parts – PT 2000 GLASS EXPANSION
PT2000 Glass Body
Includes :
31-808-0261 PT2000 Glass Body
31-808-0192 Rapid Fitting (x2)
31-808-8017 Torch Case
NRW4-2M 4mm Nylon Tubing x 2mtrs each colour
70-0041 O'ring Kit
31-808-0304
PT2000 Glass Body
Includes :
31-808-0261 PT2000 Glass Body
31-808-0192 Rapid Fitting (x2)
31-808-8017 Torch Case
NRW4-2M 4mm Nylon Tubing x 2mtrs each colour
70-0041 O'ring Kit
31-808-0517 Torch Case
24
Ref
ABC DEMOUNTABLE TORCH - GLASS EXPENSION
ABC TJA Radial Torch (all
quartz tubes)
30-808-0696
Includes :
31-808-0691
31-808-0689
31-808-0690
31-808-0627
31-808-0632
31-808-0517
31-808-0888
31-808-0643
NRW4-2M
70-EZG-CLOTH
Quartz Outer Tube
Quartz Inner Tube
Tapered Quartz Injector 1.8mm
Torch Case
Glass Torch Body
Polypropylene Ball Joint Adaptor
Rapid Fitting (x2)
TJA Bracket Screw S/S x 2
4mm Nylon Tubing x 2m each colour
EzyGlide Lubricated Cloth
30-808-0697
Includes :
31-808-0691
31-808-0689
31-808-0702
31-808-0627
31-808-0632
31-808-0517
31-808-0888
31-808-0643
NRW4-2M
70-EZG-CLOTH
Quartz Outer Tube
Quartz Inner Tube
Tapered Alumina Injector 1.8mm
Torch Case
Glass Torch Body
Polypropylene Ball Joint Adaptor
Rapid Fitting (x2)
TJA Bracket Screw S/S x 2
4mm Nylon Tubing x 2m each colour
EzyGlide Lubricated Cloth
30-808-0698
Includes :
31-808-0701
31-808-0703
31-808-0702
31-808-0627
31-808-0632
31-808-0517
31-808-0888
31-808-0643
NRW4-2M
70-EZG-CLOTH
Ref
Syalon Outer Tube
Alumina Inner Tube
Tapered Alumina Injector 1.8mm
Torch Case
Glass Torch Body
Polypropylene Ball Joint Adaptor
Rapid Fitting (x2)
TJA Bracket Screw S/S x 2
4mm Nylon Tubing x 2m each colour
EzyGlide Lubricated Cloth
New improved design
ABC TJA Radial
Torch (HF resistant
alumina injector)
New improved design
ABC TJA Radial
Torch (all ceramic
tubes)
New improved design
ABC Demountable Torch Product Options
31-808-0695
31-808-0690
31-808-0924
31-808-0881
31-808-0977
31-808-1069
31-808-0870
31-808-0691
Tapered Quartz Injector 2.0mm
Tapered Quartz Injector 1.8mm
Tapered Quartz Injector 1.5mm
Tapered Quartz Injector 1.0mm
Capillary Quartz Injector 3.0mm
Capillary Quartz Injector 1.0mm
Capillary Quartz Injector 1.8mm
Quartz Outer Tube
31-808-0689
Quartz Inner Tube
70-0696
O'ring Kit
31-808-0702
Tapered Alumina Injector 1.8mm
31-808-0701
Syalon Outer Tube
31-808-0703
Alumina Inner Tube
25

SPRAY CHAMBER
Réf
PRECISION
Réf
TJA
Désignation
SPRAY CHAMBER
250-19
130089-00
Spray chamber , Open end
250-30
003952-00
Aerosol Baffle for 250-19
275-19
136105-00
Spray chamber cyclonique avec drain de 12 mm
275-19J
Spray chamber cyclonique avec drain de 12 mm
Chambre GLASS EXPENSION
Toutes les chambres ont un drain de 4mm et sont livrées avec un connecteur UniFit de 0,75mm ID.
Voir aussi les options pour adapter les nébuliseurs au début du catalogue
Si vous préférez le system d’adaptation des nébuliseurs sur les chambres, sans joint! voir Helix au début du
catalogue
20-808-8882HE
Tracey with Helix, 50ml cyclonic, Borosilicate
glass
20-809-0222HE
Twister with Helix, 50ml cyclonic, Borosilicate
glass
20-809-0164HE
Cinnabar with Helix, 20ml cyclonic, Borosilicate
glass
20-809-0498HE
Twinnabar with Helix
20-809-0556HE
Jacketed Twinnabar with Helix, 20ml cyclonic,
Borosilicate glass
20-809-0248HE
Jacketed Twister with Helix, 50ml cyclonic,
Borosilicate glass
26
Jacketed Cinnabar with Helix, 20ml cyclonic,
Borosilicate glassJacketed Cinnabar
20-809-0311HE
20-809-0315HE
13966300
Tracey with 9.6mm outlet with Helix (TJA design
ceramic base torch only), 50ml cyclonic,
Borosilicate glass
20-809-0528HE
Cinnabar with 9.6mm outlet with Helix (TJA design
ceramic base torch only), 20ml cyclonic,
Borosilicate glass
20-809-0317HE
Twister with 9.6mm outlet with Helix (TJA design
ceramic base torch only), 50ml cyclonic,
Borosilicate glass
20-809-0361
HF Tracey, 50ml cyclonic, HF resistant material
20-809-0700
HF Tracey (TJA design torch only)
20-808-0313
HF Cinnabar, 20ml cyclonic, HF resistant material

KITS TJA RADIAL
Réf
Type
GLASS EXPANSION KIT
KT-8031B
TJA Radial ICP-OES Kit
AR30-07-FSS2E
EZT-075
20-809-0222HE
30-808-0696
31-808-0690
31-808-0691
SeaSpray uptake=2ml/min
EzyFit with 1.3mm OD x 0.75mm ID x 700mm long sample tube (Pkt.10)
Twister with Helix
ABC TJA Radial Torch (all quartz tubes)
Tapered Quartz Injector 1.8mm
Quartz Outer Tube
27
31-808-0689
Quartz Inner Tube
KT-8032A
TJA Radial ICP-OES Kit HF
AR30-07-CP2
STT-050
20-809-0361
30-808-0697
31-808-0702
31-808-0691
31-808-0689
PolyCon uptake=2ml/min
Standard Sample Tubing 1.3mm OD x 0.50mm ID x 10m long
HF Tracey
ABC TJA Radial Torch (HF resistant alumina injector)
Tapered Alumina Injector 1.8mm
Quartz Outer Tube
Quartz Inner Tube
28
NEBULISEURS POUR TJA RADIAL
Ref CAS
Ref TJA
500-92
126989-00
Cross Flow nebulizer
520-36
133202-50
O-ring kit for 500-92
520-38
Connection argon pour 500-92
Réf
AR30-07-C2
AR30-07-FC2

Type
1 ml/min
1 ml/min
Description
CONCENTRIQUE
Le nébuliseur concentrique en verre représente le
nébuliseur de choix les applications de haute précision
usuelle. Il Tolère jusqu'à 5% de solide et particule
jusqu'à 75µm, en suspension
Idem avec connecteur Eazy Fit
NEBULIZERS
CONIKAL - AN INDUSTRY STANDARD
Suggested Operation:
AR30-07-FC3
AR30-07-FC2
AR30-07-FC3E
AR30-07-FC2
Gas Pressure (psi)
Gas Flow (L/min)
Sample Uptake (ml/min)
1
30
0.7
The Conikal concentric nebulizer gives the most reproducible results for
standard ICP analyses. It represents the choice nebulizer for high precision,
routine aqueous and organic applications. High tolerance to particulates,
typically up to 75um. TDS tolerance, typically up to 5%
Note:
- Includes EZT-075 EzyFit Connector with 0.75mm ID x 1.3mm OD x 700mm L tubing (1
unit)
Note:
- Includes EZT-075 EzyFit Connector with 0.75mm ID x
1.3mm OD x 700mm L tubing (1 unit)
- Includes EL-1 EzyLok Connector Kit
- This nebulizer supersedes AR30-07-FC3
SEASPRAY - THE HIGH DISSOLVED SOLIDS NEBULIZER
Suggested Operation:
AR30-07-FSS2
AR30-07-FSS2E
Gas Pressure (psi)
Gas Flow (L/min)
Sample Uptake (ml/min)
2
30
0.7
The SeaSpray concentric nebulizer offers outstanding nebulization efficiency
for trace level analyses. It offers freedom from clogging while nebulizing
solutions to the limit of solubility of most mineral salts (up to 20%), and
conferring significant sensitivity gains. Accept particules up to 75µm
- Includes EZT-075 EzyFit Connector with 0.75mm ID x 1.3mm OD x 700mm L tubing (1
unit)
Idem
Note:
- Includes EL-1 EzyLok Connector Kit
- This nebulizer supersedes AR30-07-FC3
SLURRY - FOR SLURRIES OR SUSPENSIONS
Suggested Operation:
Gas Pressure (psi)
Gas Flow (L/min)
Sample Uptake (ml/min)
30
0.7
6
29
AR30-07-FS6
The Slurry glass concentric nebulizer is ideal for specialised applications
requiring the aspiration of slurries or suspensions. It's capillary bore is 50%
larger than standard concentrics which reduces the possibility of particle
blockage, while giving excellent signal stability. High tolerance to particulates,
typically up to 150um. Slurry nebulizers have a natural liquid uptake of
6ml/min but operates best between 1.5 - 2.5ml/min
- Includes EZT-075 EzyFit Connector with 0.75mm ID x 1.3mm OD x 700mm L tubing (1
unit)
AR30-07-FM06E
Note:
- Includes EZT-075 EzyFit Connector with 0.75mm ID x 1.3mm OD x 700mm L tubing (1
unit)
- Includes EL-1 EzyLok Connector Kit
- Operates best between 1.5 - 2.5ml/min. This nebulizer supersedes AR27-075-FS6
VEESPRAY - HANDLES HIGH PARTICLE AND TDS LOADS BEST
Gas Pressure (psi)
Gas Flow (L/min)
Sample Uptake (ml/min)
30
0.7
6
This VeeSpray nebulizer is made from quartz. It provides reproducible
performance when working with samples containing large particulates. It has
the same 6mm diameter as the standard concentric nebulizer. TDS tolerance,
typically up to 30%. High tolerance to particulates, typically up to 300um
AR30-07-QV6
(Quartz)
Non-aspirating.
Note:
- Includes VSS-075 VeeSpray Nebulizer Sample Tubing 0.75mm ID x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Non-aspirating. Operates best between 1.5 - 2.5ml/min
AR30-07-CV6
(Ceramic) (HF)
Non-aspirating.
Pump-rate
The Ceramic VeeSpray nebulizer is made from alumina ceramic, making it
ideal for HF analyses. It provides reproducible performance when working with
samples containing large particulates. It has the same 6mm diameter as the
standard concentric and the Alumina material makes it the most robust and
abrasion resistant ICP nebulizer. TDS tolerance, typically up to 30%.High
tolerance to particulates, typically up to 300um
Note:
- Includes VSS-075 VeeSpray Nebulizer Sample Tubing 0.75mm ID x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Non-aspirating. Operates best between 1.5 - 2.5ml/min
MICROMIST - THE LOW UPTAKE NEBULIZER FOR ALL ICPS
The MicroMist micro-uptake glass concentric nebulizer offers high
performance for limited sample volumes. It makes routine ICP-MS Hg
determinations possible and reduces matrix effects when used with Glass
Expansion's Cinnabar spray chamber
Suggested Operation:
AR30-07-FM06
AR30-07-FM02
AR30-07-FM01
AR30-07-FM005
AR30-07-FM06E
AR30-07-FM02E
AR30-07-FM01E
Gas Pressure (psi)
30
Gas Flow (L/min)
0.7
Sample Uptake (ml/min)
Includes EZT-050 EzyFit Connector with 0.50mm
ID x 1.3mm OD x 700mm L tubing (1 unit)
Note:
- Includes EL-1
EzyLok Connector Kit
- This nebulizer
supersedes AR30-07FM06
AR30-07-FM005E
6
2
1
0,5
6
2
1
0,5
POLYCON - FOR ROUTINE HIGH PRECISION HF ANALYSES
Suggested Operation:
The PolyCon concentric nebulizer represents the choice nebulizer for high
precision analyses involving samples digested in HF. The PolyCon has been
used successfully in ICP desolvators such as the MCN-6000, where high
temperatures are encountered. It has become a favourite in the semi
conductor industry, and has enabled analysts to produce accurate (r = 0.9998)
calibration curves for low-ppt levels of Na, K, Fe and Ca in 30% hydrogen
peroxide
Gas Pressure (psi)
Gas Flow (L/min)
Sample Uptake (ml/min)
30
AR30-07-CP2
AR30-07-CP06
AR30-07-CP02
AR30-07-CP01
AR30-07-CP005
30
0.7
- Includes STT-075 Standard Sample Tubing
0.75mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-050 Standard Sample Tubing
0.50mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-050 Standard Sample Tubing
0.50mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-025 Standard Sample Tubing
0.25mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-025 Standard Sample Tubing
0.25mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
2
0,6
0,2
0,1
0,05
OPALMIST - IDEAL FOR THE GEOCHEMISTRY & SEMICONDUCTOR INDUSTRY
The OpalMist PFA concentric nebulizer represents the choice nebulizer for
high precision analyses involving analyses requiring high chemical resistancy
to HF, alkalis and organics. It also provides excellent results for trace
analyses.
Suggested Operation:
AR30-07-PFA2
AR30-07-PFA06
AR30-07-PFA02
AR30-07-PFA01
AR30-07-PFA005
Gas Pressure (psi)
Gas Flow (L/min)
30
0.7
- Includes STT-075 Standard Sample Tubing
0.75mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-050 Standard Sample Tubing
0.50mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-050 Standard Sample Tubing
0.50mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-025 Standard Sample Tubing
0.25mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-025 Standard Sample Tubing
0.25mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
31
Sample Uptake (ml/min)
2
0,6
0,2
0,1
0,05
TJA TRACE, ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID? DUO

TORCH TRACE, ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID
Réf
RéfTJA
Désignation
275-10
30-808-1143
126432-03
Torch base ceramic, Trace, with injector 1.5
mm
275-10W/O
30-808-1144
126440-03
Torch base ceramic Trace, without injector
Torch base ceramic, Trace, with alumina
injector 1.5 mm
275-10HF
250-40
250-41
31-808-8903
250-42
250-43
260-84
260-83
31-808-8904
275-20
275-35








125407-01
Quartz injector 1 mm
125407-00
Quartz injector 1.5 mm
136502-01
136502-02
Quartz injector 2.0 mm
Quartz injector 2.4 mm
Alumina injector 1.0 mm
136436-01
Alumina injector 1.5 mm
TJA Teflon adapter, torch
Argon fittingf for ceramic base torch
FULLY DEMOUNTABLE TORCH FOR AXIAL IRIS TRASCAN TRACE ADVANTAGE
Highly accurate construction
Performance equal to or better than 1-piece torches
All components removable and replaceable
Outer, Inner and Injector Tubes separately replaced in seconds
Lowest running costs and ICP downtime
Ceramic tubes available - reduces silicon background, low RSDs, long tube life
Special Outer and Inner Tubes for Laser Ablation and Research
Constructively versatile, Glass Expansion Fully Demountable Torches can be quickly and easily assembled
and disassembled for storage and cleaning. Instead of storing a variety of torches for different applications,
simply change the torch tubes to suit your application needs. Torch design consistency means that no
realignment is needed.
Interchangeable injector, inner and outer tubes means you no longer have to throw out an entire torch once a
tube has deteriorated. Simply replace the tubes. Quartz and alumina injectors in varying internal diameters
are conveniently available. Ceramic tubes are also available for HF analyses and Laser Ablation and
Research.
32
Ref
PT2000 DEMOUNTABLE TORCH - GLASS EXPENSION
30-808-0171
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0344
31-808-0172
31-808-9200
31-808-8917
70-EZG-CLOTH
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene 9.6mm Joint Adaptor, straight
Quartz Outer Tube
Quartz Inner Tube
Tapered Quartz Injector 1.8mm
EzyGlide Lubricated Cloth
PT2000 TJA Axial
Torch (all quartz
tubes)
30-808-0222
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0344
31-808-0172
31-808-9200
31-808-0012
70-EZG-CLOTH
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene 9.6mm Joint Adaptor, straight
Quartz Outer Tube
Quartz Inner Tube
Tapered Alumina Injector 1.8mm
EzyGlide Lubricated Cloth
30-808-0224
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0344
31-808-0225
31-808-0018
31-808-0012
70-EZG-CLOTH
Ref
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene 9.6mm Joint Adaptor, straight
Syalon Outer Tube
Alumina Inner Tube
Tapered Alumina Injector 1.8mm
EzyGlide Lubricated Cloth
PT2000 TJA Axial
Torch (HF
resistant alumina
injector)
PT2000 TJA Axial
Torch (all ceramic
tubes)
PT2000 Demountable Torch Product Options
31-808-0296
31-808-0310
31-808-8917
31-808-0356
31-808-0601
31-808-0602
31-808-0594
Tapered Quartz Injector 1.0mm
Tapered Quartz Injector 1.5mm
Tapered Quartz Injector 1.8mm
Tapered Quartz Injector 2.0mm
Capillary Quartz Injector 1.0mm
Capillary Quartz Injector 1.5mm
Capillary Quartz Injector 1.8mm
31-808-0172
Quartz Outer Tube
31-808-9200
Quartz Inner Tube
70-0171
O'ring Kit
31-808-0384
31-808-0012
Tapered Alumina Injector 1.5mm
Tapered Alumina Injector 1.8mm
31-808-0225
Syalon Outer Tube
31-808-0018
Alumina Inner Tube
70-0222
O'ring Kit
33
Ref
Spare parts – PT 2000 GLASS EXPANSION
31-808-0472
PT2000 TJA Torch Base
31-808-0305
PT2000 TJA Axial Torch Base with 9.6mm Adaptor
Ref
ABC DEMOUNTABLE TORCH - GLASS EXPENSION
ABC TJA Radial
Torch (all quartz
tubes)
30-808-0704
Includes :
31-808-0707
31-808-0689
31-808-0690
31-808-0627
31-808-0632
31-808-0344
31-808-0888
31-808-0643
NRW4-2M
70-EZG-CLOTH
Quartz Outer Tube
Quartz Inner Tube
New improved
Tapered Quartz Injector 1.8mm
design
Torch Case
Glass Torch Body
Polypropylene 9.6mm Joint Adaptor, straight
Rapid Fitting (x2)
TJA Bracket Screw S/S x 2
4mm Nylon Tubing x 2m each colour
EzyGlide Lubricated Cloth
30-808-0705
ABC TJA Radial
Torch (HF
resistant alumina
injector)
Includes :
31-808-0707
31-808-0689
31-808-0702
31-808-0627
31-808-0632
31-808-0344
31-808-0888
31-808-0643
NRW4-2M
70-EZG-CLOTH
Ref
Quartz Outer Tube
Quartz Inner Tube
Tapered Alumina Injector 1.8mm
Torch Case
New improved
Glass Torch Body
design
Polypropylene 9.6mm Joint Adaptor, straight
Rapid Fitting (x2)
TJA Bracket Screw S/S x 2
4mm Nylon Tubing x 2m each colour
EzyGlide Lubricated Cloth
ABC Demountable Torch Product Options
31-808-0695
31-808-0690
31-808-0924
31-808-0881
31-808-0977
31-808-1069
31-808-0870
31-808-0707
Tapered Quartz Injector 2.0mm
Tapered Quartz Injector 1.8mm
Tapered Quartz Injector 1.5mm
Tapered Quartz Injector 1.0mm
Capillary Quartz Injector 3.0mm
Capillary Quartz Injector 1.0mm
Capillary Quartz Injector 1.8mm
Quartz Outer Tube
31-808-0689
Quartz Inner Tube
31-808-0972
ABC Quartz Inner Tube, High Flow
70-0171
O'ring Kit
31-808-0702
Tapered Alumina Injector 1.8mm
34

SPRAY CHAMBER FOR ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID DUO

SPRAY CHAMBER WITHOUT O RING « HELIX SYSTEM »
Most ICP spectrometers rely on an o'ring seal between the nebulizer and the spray chamber. However, even
the most chemically resistant o'rings are prone to wear and tear and require regular replacement. They also
tend to bond to a glass nebulizer, making the nebulizer difficult to remove. To eliminate these problems, Glass
Expansion has developed Helix - the user friendly nebulizer fitting.
Expansion has developed Helix - the user friendly nebulizer fitting.
Chambre GLASS
EXPANSION
Tracey with 4mm pumped Drain
20-809-0456HE
Tracey cyclonic - an industry standard - 50ml
Tracey Spray Chamber is a 50ml cyclonic spray chamber which
has excellent stability with low memory and matrix effects.
Note: For your convenience includes UFT-075 UniFit Connector (1
unit)
Twister with 4mm Pumped Drain
20-809-0365HE
20-809-0328HE
Twister cyclonic - reduces solvent load 50ml
The Twister spray chamber lowers solvent load without
compromising detection limits. Provides good stability for analysing
organics.
Note: Nebulizer adaptor 21-808-0256 is suitable for use with 6mm
glass concentric nebulizers. Nebulizer adaptor P/N 21-808-0257 is
required when using this spray chamber with VeeSpray, OpalMist
and PolyCon nebulizers.
- For your convenience includes UFT-075 UniFit Connector (1 unit)
Cinnabar with 4mm Pumped Drain
Cinnabar Cyclonic - the low volume spray chamber - 20ml
The Cinnabar spray chamber gives good sensitivity at very low
uptakes, while reducing memory and matrix effects. Designed for
use with Glass Expansion's MicroMist nebulizers
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm
glass concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is
required when using this spray chamber with OpalMist and
PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
Twinnabar with 4mm Pumped Drain
20-809-0330HE
Twinnabar cyclonic - low volume, low solvent load - 20ml
The Twinnabar cyclonic spray chamber is a low volume spray
chamber with a central transfer tube (or baffle), combining the
benfits of the Twister and the Cinnabar. It combines excellent
precision with a very fast washout.
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm
glass concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is
required when using this spray chamber with OpalMist and
PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
Tracey with 9.6mm Gravity Drain
20-809-1100HE
Tracey cyclonic - an industry standard - 50ml
Tracey Spray Chamber is a 50ml cyclonic spray chamber which
has excellent stability with low memory and matrix effects.
Note: For your convenience includes UFT-075 UniFit Connector (1
unit)
35
Cinnabar with 9.6mm Gravity Drain
20-809-0212HE
Cinnabar Cyclonic - the low volume spray chamber - 20ml
The Cinnabar spray chamber gives good sensitivity at very low
uptakes, while reducing memory and matrix effects. Designed for
use with Glass Expansion's MicroMist nebulizers
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm
glass concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is
required when using this spray chamber with OpalMist and
PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
Twinnabar with 9.6mm Gravity Drain
20-809-0339HE
Twinnabar cyclonic - low volume, low solvent load - 20ml
The Twinnabar cyclonic spray chamber is a low volume spray
chamber with a central transfer tube (or baffle), combining the
benfits of the Twister and the Cinnabar. It combines excellent
precision with a very fast washout.
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm
glass concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is
required when using this spray chamber with OpalMist and
PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
Jacketed Tracey with 4mm Pumped Drain
20-809-0153HE
Jacketed Tracey spray chamber (borosilicate glass material) 50ml
The Tracey spray chamber has excellent sensitivity and stability
with low memory and matrix effects. Can be thermostatted to
constant temperature to ensure hihgly reproducible results.
Alternatively can be cooled to suppress volatilization, allowing the
direct aspiration of highly volatile solvents such as naphtha and
petrol/gasoline
Note: For your convenience includes UFT-075 UniFit Connector (1
unit) and QSM-1/4-4 EzyLok Connector for 1/4 inch Tubing, pack
of 4 (suitable for jacketed spray chambers)
Twister with Extended Outlet for TJA Ceramic Base Torch
20-809-0467HE
Twister cyclonic - reduces solvent load 50ml
The Twister spray chamber lowers solvent load without
compromising detection limits. Provides good stability for analysing
organics.
Note: Nebulizer adaptor 21-808-0256 is suitable for use with 6mm
glass concentric nebulizers. Nebulizer adaptor P/N 21-808-0257 is
required when using this spray chamber with VeeSpray, OpalMist
and PolyCon nebulizers.
- For your convenience includes UFT-075 UniFit Connector (1 unit)
Tracey with Extended Outlet for TJA Ceramic Base Torch
20-809-0551HE
Tracey cyclonic - an industry standard - 50ml
Tracey Spray Chamber is a 50ml cyclonic spray chamber which
has excellent stability with low memory and matrix effects.
Note: For your convenience includes UFT-075 UniFit Connector (1
unit)
Cinnabar with Extended Outlet for TJA Ceramic Base Torch
20-809-0341HE
70-100-0152
The Cinnabar spray chamber gives good sensitivity at very low
uptakes, while reducing memory and matrix effects. Designed for
use with Glass Expansion's MicroMist nebulizers
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm
glass concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is
required when using this spray chamber with OpalMist and
PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
Helix Locking Screw
36
70-100-0237
Helix Seal
Chambre GLASS
EXPENSION HF
20-809-0352
HF Tracey, 50ml cyclonic, HF resistant material
20-809-0465
HF Cinnabar, 20ml cyclonic, HF resistant material

SPRAY CHAMBER WITH O RING
Réf
PRECISION
Réf
TJA
Désignation
275-16
136120-00
Cyclonic Spray Chamber, Axial, Gravity Drain
TJA Trace Advantage Axial, Trace Scan & IRIS
275-15
134620-00
Cyclonic Spray Chamber, 10mm Drain, Trace ambre
TJA Trace Advantage Axial, Trace Scan & IRIS
275-15J
136105-00
Cyclonic Spray Chamber, Water-Cooled, 12mm Drain
TJA Trace Advantage Axial, Trace Scan & IRIS
SPRAY CHAMBER
If you wish a nebulizer connecting system without O Ring see following HELIX section.
20-809-0456
20-809-0365
Tracey with 4mm pumped Drain, 50ml cyclonic, Borosilicate
glass
Nebulizer adaptor 21-808-0256 is suitable for use with 6mm glass
concentric nebulizers. Nebulizer adaptor P/N 21-808-0257 is
required when using this spray chamber with VeeSpray, OpalMist
and PolyCon nebulizers.
- For your convenience includes UFT-075 UniFit Connector (1
unit))
Twister with 4mm Pumped Drain, 50ml cyclonic, Borosilicate
glass
Twister cyclonic - reduces solvent load 50ml
The Twister spray chamber lowers solvent load without compromising
detection limits. Provides good stability for analysing organics.
Note: Nebulizer adaptor 21-808-0256 is suitable for use with 6mm glass
concentric nebulizers. Nebulizer adaptor P/N 21-808-0257 is required
when using this spray chamber with VeeSpray, OpalMist and PolyCon
nebulizers.
- For your convenience includes UFT-075 UniFit Connector (1 unit)
37
Cinnabar with 4mm Pumped Drain , 20ml cyclonic,
Borosilicate glass
20-809-0328
The Cinnabar spray chamber gives good sensitivity at very low uptakes,
while reducing memory and matrix effects. Designed for use with Glass
Expansion's MicroMist nebulizers
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm glass
concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is required
when using this spray chamber with OpalMist and PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
Twinnabar with 4mm Pumped Drain, 20ml cyclonic,
Borosilicate glass l
20-809-0330
20-809-1100
(134620-00)
The Twinnabar cyclonic spray chamber is a low volume spray chamber
with a central transfer tube (or baffle), combining the benfits of the Twister
and the Cinnabar. It combines excellent precision with a very fast
washout.
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm glass
concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is required
when using this spray chamber with OpalMist and PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
Tracey with 9.6mm Gravity Drain, 50ml cyclonic, Borosilicate
glass
Tracey Spray Chamber is a 50ml cyclonic spray chamber which has
excellent stability with low memory and matrix effects.
Note: For your convenience includes UFT-075 UniFit Connector (1 unit)
Cinnabar with 9.6mm Gravity Drain, 20ml cyclonic,
Borosilicate glass
20-809-0212
The Cinnabar spray chamber gives good sensitivity at very low uptakes,
while reducing memory and matrix effects. Designed for use with Glass
Expansion's MicroMist nebulizers
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm glass
concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is required
when using this spray chamber with OpalMist and PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
Twinnabar with 9.6mm Gravity Drain, 20ml cyclonic,
Borosilicate glass
20-809-0339
The Twinnabar cyclonic spray chamber is a low volume spray chamber
with a central transfer tube (or baffle), combining the benfits of the Twister
and the Cinnabar. It combines excellent precision with a very fast
washout.
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm glass
concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is required
when using this spray chamber with OpalMist and PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
Jacketed Tracey with 4mm Pumped Drain , 50ml cyclonic,
Borosilicate glass
20-809-0153
(136105-00)
The Tracey spray chamber has excellent sensitivity and stability with low
memory and matrix effects. Can be thermostatted to constant
temperature to ensure hihgly reproducible results. Alternatively can be
cooled to suppress volatilization, allowing the direct aspiration of highly
volatile solvents such as naphtha and petrol/gasoline
Note: For your convenience includes UFT-075 UniFit Connector (1 unit)
and QSM-1/4-4 EzyLok Connector for 1/4 inch Tubing, pack of 4 (suitable
for jacketed spray chambers)
Twister with Extended Outlet for TJA Ceramic Base Torch,
50ml cyclonic, Borosilicate glass
20-809-0467
The Twister spray chamber lowers solvent load without compromising
detection limits. Provides good stability for analysing organics.
Note: Nebulizer adaptor 21-808-0256 is suitable for use with 6mm glass
concentric nebulizers. Nebulizer adaptor P/N 21-808-0257 is required
when using this spray chamber with VeeSpray, OpalMist and PolyCon
nebulizers.
- For your convenience includes UFT-075 UniFit Connector (1 unit)
38
20-809-0551
Tracey with Extended Outlet for TJA Ceramic Base Torch,
50ml cyclonic, Borosilicate glass
Tracey Spray Chamber is a 50ml cyclonic spray chamber which has
excellent stability with low memory and matrix effects.
Note: For your convenience includes UFT-075 UniFit Connector (1 unit)
;
Cinnabar with Extended Outlet for TJA Ceramic Base Torch,
20ml cyclonic, Borosilicate glass
20-809-0341
20-809-0341
The Cinnabar spray chamber gives good sensitivity at very low uptakes,
while reducing memory and matrix effects. Designed for use with Glass
Expansion's MicroMist nebulizers
Note: Nebulizer adaptor 21-808-0259 is suitable for use with 6mm glass
concentric nebulizers. Nebulizer adaptor P/N 21-808-0944 is required
when using this spray chamber with OpalMist and PolyCon nebulizers.
For your convenience includes UFT-075 UniFit Connector (1 unit)
70-100-0152
Helix Locking Screw
70-100-0237
Helix Seal
Chambre GLASS
EXPENSION HF
20-809-0352
HF Tracey, 50ml cyclonic, HF resistant material
20-809-0465
HF Cinnabar, 20ml cyclonic, HF resistant material

TORCH FOR TRACE, ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID
Réf
RéfTJA
Désignation
275-10
30-808-1143
126432-03
Torch base ceramic, Trace, with injector 1.5
mm
275-10W/O
30-808-1144
126440-03
Torch base ceramic Trace, without injector
Torch base ceramic, Trace, with alumina
injector 1.5 mm
275-10HF
250-40
250-41
31-808-8903
250-42
250-43
260-84
260-83
31-808-8904
275-20
275-35
125407-01
Quartz injector 1 mm
125407-00
Quartz injector 1.5 mm
136502-01
136502-02
Quartz injector 2.0 mm
Quartz injector 2.4 mm
Alumina injector 1.0 mm
136436-01
Alumina injector 1.5 mm
TJA Teflon adapter, torch
Argon fittingf for ceramic base torch
39








FULLY DEMOUNTABLE TORCH FOR AXIAL IRIS TRASCAN TRACE ADVANTAGE
Highly accurate construction
Performance equal to or better than 1-piece torches
All components removable and replaceable
Outer, Inner and Injector Tubes separately replaced in seconds
Lowest running costs and ICP downtime
Ceramic tubes available - reduces silicon background, low RSDs, long tube life
Special Outer and Inner Tubes for Laser Ablation and Research
Constructively versatile, Glass Expansion Fully Demountable Torches can be quickly and easily assembled
and disassembled for storage and cleaning. Instead of storing a variety of torches for different applications,
simply change the torch tubes to suit your application needs. Torch design consistency means that no
realignment is needed.
Interchangeable injector, inner and outer tubes means you no longer have to throw out an entire torch once a
tube has deteriorated. Simply replace the tubes. Quartz and alumina injectors in varying internal diameters
are conveniently available. Ceramic tubes are also available for HF analyses and Laser Ablation and
Research.
40
Ref
PT2000 DEMOUNTABLE TORCH - GLASS EXPENSION
30-808-0171
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0344
31-808-0172
31-808-9200
31-808-8917
70-EZG-CLOTH
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene 9.6mm Joint Adaptor, straight
Quartz Outer Tube
Quartz Inner Tube
Tapered Quartz Injector 1.8mm
EzyGlide Lubricated Cloth
PT2000 TJA Axial
Torch (all quartz
tubes)
30-808-0222
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0344
31-808-0172
31-808-9200
31-808-0012
70-EZG-CLOTH
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene 9.6mm Joint Adaptor, straight
Quartz Outer Tube
Quartz Inner Tube
Tapered Alumina Injector 1.8mm
EzyGlide Lubricated Cloth
30-808-0224
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0344
31-808-0225
31-808-0018
31-808-0012
70-EZG-CLOTH
Ref
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene 9.6mm Joint Adaptor, straight
Syalon Outer Tube
Alumina Inner Tube
Tapered Alumina Injector 1.8mm
EzyGlide Lubricated Cloth
PT2000 TJA Axial
Torch (HF
resistant alumina
injector)
PT2000 TJA Axial
Torch (all ceramic
tubes)
PT2000 Demountable Torch Product Options
31-808-0296
31-808-0310
31-808-8917
31-808-0356
31-808-0601
31-808-0602
31-808-0594
Tapered Quartz Injector 1.0mm
Tapered Quartz Injector 1.5mm
Tapered Quartz Injector 1.8mm
Tapered Quartz Injector 2.0mm
Capillary Quartz Injector 1.0mm
Capillary Quartz Injector 1.5mm
Capillary Quartz Injector 1.8mm
31-808-0172
Quartz Outer Tube
31-808-9200
Quartz Inner Tube
70-0171
O'ring Kit
31-808-0384
31-808-0012
Tapered Alumina Injector 1.5mm
Tapered Alumina Injector 1.8mm
31-808-0225
Syalon Outer Tube
31-808-0018
Alumina Inner Tube
70-0222
O'ring Kit
41
Ref
Spare parts – PT 2000 GLASS EXPANSION
31-808-0472
PT2000 TJA Torch Base
31-808-0305
PT2000 TJA Axial Torch Base with 9.6mm Adaptor
Ref
ABC DEMOUNTABLE TORCH - GLASS EXPENSION
ABC TJA Radial
Torch (all quartz
tubes)
30-808-0704
Includes :
31-808-0707
31-808-0689
31-808-0690
31-808-0627
31-808-0632
31-808-0344
31-808-0888
31-808-0643
NRW4-2M
70-EZG-CLOTH
Quartz Outer Tube
Quartz Inner Tube
New improved
Tapered Quartz Injector 1.8mm
design
Torch Case
Glass Torch Body
Polypropylene 9.6mm Joint Adaptor, straight
Rapid Fitting (x2)
TJA Bracket Screw S/S x 2
4mm Nylon Tubing x 2m each colour
EzyGlide Lubricated Cloth
30-808-0705
ABC TJA Radial
Torch (HF
resistant alumina
injector)
Includes :
31-808-0707
31-808-0689
31-808-0702
31-808-0627
31-808-0632
31-808-0344
31-808-0888
31-808-0643
NRW4-2M
70-EZG-CLOTH
Ref
Quartz Outer Tube
Quartz Inner Tube
Tapered Alumina Injector 1.8mm
Torch Case
New improved
Glass Torch Body
design
Polypropylene 9.6mm Joint Adaptor, straight
Rapid Fitting (x2)
TJA Bracket Screw S/S x 2
4mm Nylon Tubing x 2m each colour
EzyGlide Lubricated Cloth
ABC Demountable Torch Product Options
31-808-0695
31-808-0690
31-808-0924
31-808-0881
31-808-0977
31-808-1069
31-808-0870
31-808-0707
Tapered Quartz Injector 2.0mm
Tapered Quartz Injector 1.8mm
Tapered Quartz Injector 1.5mm
Tapered Quartz Injector 1.0mm
Capillary Quartz Injector 3.0mm
Capillary Quartz Injector 1.0mm
Capillary Quartz Injector 1.8mm
Quartz Outer Tube
31-808-0689
Quartz Inner Tube
31-808-0972
ABC Quartz Inner Tube, High Flow
70-0171
O'ring Kit
31-808-0702
Tapered Alumina Injector 1.8mm
42

KITS FOR ADVANTAGE AXIAL,TRACE SCAN, IRIS AP, INTREPID
Réf
Type
GLASS EXPANSION KIT
KT-8033B
TJA Axial ICP Kit
AR30-07-FSS2E
EZT-075
20-809-0365HE
30-808-0704
31-808-0690
31-808-0707
31-808-0689
SeaSpray uptake=2ml/min
EzyFit with 1.3mm OD x 0.75mm ID x 700mm long sample tube (Pkt.10)
Twister with 4mm Pumped Drain with Helix
ABC TJA Axial Torch (all quartz tubes)
Tapered Quartz Injector 1.8mm
Quartz Outer Tube
Quartz Inner Tube
KT-8034A
TJA Axial ICP Kit HF
AR30-07-CP2
STT-050
20-809-0352
30-808-0705
31-808-0702
31-808-0707
31-808-0689
PolyCon uptake=2ml/min
Standard Sample Tubing 1.3mm OD x 0.50mm ID x 10m long
HF Tracey
ABC TJA Axial Torch (HF resistant alumina injector)
Tapered Alumina Injector 1.8mm
Quartz Outer Tube
Quartz Inner Tube

T O RCH F O R DU O
Réf
RéfTJA
Désignation
275-10DV
30-808-1145
138562-00
Torch base ceramic, DV with injector 1.5 mm
275-10DV
30-808-1146
126440-06
Torch base ceramic, DV without injector
250-23
31-808-0844
138563-00
Optic sleeve for DV torch
250-40
125407-01
Quartz injector 1 mm
125407-00
Quartz injector 1.5 mm
136502-01
Quartz injector 2.0 mm
250-41
31-808-8903
250-42
31-808-1320
Capillary Quartz Injector 1.8mm (for TJA
ceramic base torch)
31-808-0349
250-43
260-84
260-83
31-808-8904
275-20
275-35
136502-02
Quartz injector 2.4 mm
Alumina injector 1.0 mm
136436-01
Alumina injector 1.5 mm
TJA Teflon adapter, torch
Argon fittingf for ceramic base torch
43

FULLY DEMOUNTABLE TORCH FOR IRIS DUO
Ref
PT2000 DEMOUNTABLE TORCH - GLASS EXPENSION
30-808-0274
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0344
31-808-0272
31-808-9200
31-808-8917
31-808-0572
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene 9.6mm Joint Adaptor, straight
Quartz Outer Tube (3mm port hole)
Quartz Inner Tube
Tapered Quartz Injector 1.8mm
TJA Duo Torch Sleeve Adaptor
30-808-0275
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0344
31-808-0272
31-808-9200
31-808-0012
31-808-0572
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene 9.6mm Joint Adaptor, straight
Quartz Outer Tube (3mm port hole)
Quartz Inner Tube
Tapered Alumina Injector 1.8mm
TJA Duo Torch Sleeve Adaptor
30-808-0276
Includes :
31-808-0261
31-808-0192
31-808-8017
NRW4-2M
31-808-0186
31-808-0344
31-808-0273
31-808-0018
31-808-0012
31-808-0572
Ref
Glass Torch Body
Rapid Fitting (x2)
Torch Case
4mm Nylon Tubing x 2m each colour
TJA Stainless Steel Bracket Screws x 2
Polypropylene 9.6mm Joint Adaptor, straight
Syalon Outer Tube (3mm port hole)
Alumina Inner Tube
Tapered Alumina Injector 1.8mm
TJA Duo Torch Sleeve Adaptor
PT2000 TJA Duo
Torch (all quartz
tubes)
PT2000 TJA Duo
Torch (HF
resistant alumina
injector)
PT2000 TJA Duo
Torch (all ceramic
tubes)
PT2000 Demountable Torch Product Options
31-808-0296
31-808-0310
31-808-8917
31-808-0356
31-808-0601
31-808-0602
31-808-0594
Tapered Quartz Injector 1.0mm
Tapered Quartz Injector 1.5mm
Tapered Quartz Injector 1.8mm
Tapered Quartz Injector 2.0mm
Capillary Quartz Injector 1.0mm
Capillary Quartz Injector 1.5mm
Capillary Quartz Injector 1.8mm
31-808-0272
Quartz Outer Tube (3mm port hole)
31-808-9200
Quartz Inner Tube
31-808-0319
Quartz Outer Tube - Duo short
70-0171
31-808-0384
O'ring Kit
Tapered Alumina Injector 1.5mm
31-808-0012
Tapered Alumina Injector 1.8mm
31-808-0273
Syalon Outer Tube
31-808-0018
Alumina Inner Tube
70-0275
O'ring Kit
44
Ref
ABC DEMOUNTABLE TORCH - GLASS EXPENSION
30-808-0692
ABC TJA Duo
Torch (all quartz
tubes)
Includes :
31-808-0688
31-808-0689
31-808-0690
31-808-0627
31-808-0632
31-808-0344
31-808-0888
31-808-0643
NRW4-2M
31-808-0572
Quartz Outer Tube
Quartz Inner Tube
Tapered Quartz Injector 1.8mm
New improved
Torch Case
design
Glass Torch Body
Polypropylene 9.6mm Joint Adaptor, straight
Rapid Fitting (x2)
TJA Bracket Screw S/S x 2
4mm Nylon Tubing x 2m each colour
TJA Duo Torch Sleeve Adaptor
ABC TJA Duo
Torch (HF
resistant alumina
injector)
30-808-0693
Includes :
31-808-0688
31-808-0689
31-808-0702
31-808-0627
31-808-0632
31-808-0344
31-808-0888
31-808-0643
NRW4-2M
31-808-0572
Ref
Quartz Outer Tube
Quartz Inner Tube
New improved
Tapered Alumina Injector 1.8mm
design
Torch Case
Glass Torch Body
Polypropylene 9.6mm Joint Adaptor, straight
Rapid Fitting (x2)
TJA Bracket Screw S/S x 2
4mm Nylon Tubing x 2m each colour
TJA Duo Torch Sleeve Adaptor
ABC Demountable Torch Product Options
31-808-0695
31-808-0690
31-808-0924
31-808-0881
31-808-0977
31-808-1069
31-808-0870
31-808-0688
Tapered Quartz Injector 2.0mm
Tapered Quartz Injector 1.8mm
Tapered Quartz Injector 1.5mm
Tapered Quartz Injector 1.0mm
Capillary Quartz Injector 3.0mm
Capillary Quartz Injector 1.0mm
Capillary Quartz Injector 1.8mm
Quartz Outer Tube
31-808-1278
Quartz Outer Tube - ABC Duo short
31-808-0689
Quartz Inner Tube
31-808-0972
70-0171
31-808-0702
31-808-1078
ABC Quartz Inner Tube, High Flow
O'ring Kit
Tapered Alumina Injector 1.8mm
Tapered Alumina Injector 1.5mm
Torche démontable ABC , en fonctionnement sur un DUO Axial
45

KITS FOR DUO
Réf
Type
GLASS EXPANSION KIT
KT-8035B
TJA Duo ICP-OES Kit
AR30-07-FSS2E
EZT-075
20-809-0365HE
30-808-0692
31-808-0688
31-808-0689
31-808-0690
SeaSpray uptake=2ml/min
EzyFit with 1.3mm OD x 0.75mm ID x 700mm long sample tube (Pkt.10)
Twister with 4mm Pumped Drain with Helix
ABC TJA Duo Torch (all quartz tubes)
Quartz Outer Tube
Quartz Inner Tube
Tapered Quartz Injector 1.8mm
KT-8036A
TJA Duo ICP-OES Kit HF
AR30-07-CP2
STT-050
20-809-0352
30-808-0693
31-808-0702
31-808-0688
31-808-0689
PolyCon uptake=2ml/min
Standard Sample Tubing 1.3mm OD x 0.50mm ID x 10m long
HF Tracey
ABC TJA Duo Torch (HF resistant alumina injector)
Tapered Alumina Injector 1.8mm
Quartz Outer Tube
Quartz Inner Tube

NÉBULIZERS FOR TJA AXIAL AND DUO
Ref CAS
500-92
520-36
520-38
Ref TJA
126989-00
133202-50
520-30
Cross Flow nebulizer
O-ring kit for 500-92
Argon inlet fitting for 500-92
Bouchon à utiliser sur les chambres à extrémité ouvertes
CONIKAL - AN INDUSTRY STANDARD
Suggested Operation: Gas Pressure (psi)
Gas Flow (L/min)
Sample Uptake (ml/min)
2
AR30-07-FC2
30
0.7
1
AR30-07-FC1
30
0.7
The Conikal concentric nebulizer gives the most reproducible results for
standard ICP analyses. It represents the choice nebulizer for high precision,
routine aqueous and organic applications. High tolerance to particulates,
typically up to 75um. TDS tolerance, typically up to 5%
Note:
- Includes EZT-075 EzyFit Connector with 0.75mm ID x 1.3mm OD x 700mm L tubing (1
unit)
Suggested Operation:
AR30-07-FC2E
AR30-07-FC1E
Gas Pressure (psi)
30
30
Gas Flow (L/min)
0.7
0.7
Sample Uptake (ml/min)
2
1
Note:
- Includes EZT-075 EzyFit Connector with 0.75mm ID x
1.3mm OD x 700mm L tubing (1 unit)
- Includes EL-1 EzyLok Connector Kit
- This nebulizer supersedes AR30-07-FC3
SEASPRAY - THE HIGH DISSOLVED SOLIDS NEBULIZER
Suggested Operation:
Gas Pressure (psi)
30
46
Gas Flow (L/min)
0.7
Sample Uptake (ml/min)
2
The SeaSpray concentric nebulizer offers outstanding nebulization efficiency
for trace level analyses. It offers freedom from clogging while nebulizing
solutions to the limit of solubility of most mineral salts (up to 20%), and
conferring significant sensitivity gains. Accept particules up to 75µm
- Includes EZT-075 EzyFit Connector with 0.75mm ID x 1.3mm OD x 700mm L tubing (1
unit)
AR30-07-FSS2
Idem
Note:
- Includes EL-1 EzyLok Connector Kit
- This nebulizer supersedes AR30-07-FC3
AR30-07-FSS2E
SLURRY - FOR SLURRIES OR SUSPENSIONS
Suggested Operation:
AR30-07-FS6
Gas Pressure (psi)
Gas Flow (L/min)
Sample Uptake (ml/min)
6
30
0.7
The Slurry glass concentric nebulizer is ideal for specialised applications
requiring the aspiration of slurries or suspensions. It's capillary bore is 50%
larger than standard concentrics which reduces the possibility of particle
blockage, while giving excellent signal stability. High tolerance to particulates,
typically up to 150um. Slurry nebulizers have a natural liquid uptake of
6ml/min but operates best between 1.5 - 2.5ml/min
- Includes EZT-075 EzyFit Connector with 0.75mm ID x 1.3mm OD x 700mm L tubing (1
unit)
AR30-07-FC2E
Note:
- Includes EZT-075 EzyFit Connector with 0.75mm ID x 1.3mm OD x 700mm L tubing (1
unit)
- Includes EL-1 EzyLok Connector Kit
- Operates best between 1.5 - 2.5ml/min. This nebulizer supersedes AR27-075-FS6
VEESPRAY - HANDLES HIGH PARTICLE AND TDS LOADS BEST
Gas Pressure (psi)
Gas Flow (L/min)
Sample Uptake (ml/min)
30
0.7
6
This VeeSpray nebulizer is made from quartz. It provides reproducible
performance when working with samples containing large particulates. It has
the same 6mm diameter as the standard concentric nebulizer. TDS tolerance,
typically up to 30%. High tolerance to particulates, typically up to 300um
AR30-07-QV6
(Quartz)
Non-aspirating.
Note:
- Includes VSS-075 VeeSpray Nebulizer Sample Tubing 0.75mm ID x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Non-aspirating. Operates best between 1.5 - 2.5ml/min
AR30-07-CV6
(Ceramic) (HF)
Non-aspirating.
Pump-rate
The Ceramic VeeSpray nebulizer is made from alumina ceramic, making it
ideal for HF analyses. It provides reproducible performance when working with
samples containing large particulates. It has the same 6mm diameter as the
standard concentric and the Alumina material makes it the most robust and
abrasion resistant ICP nebulizer. TDS tolerance, typically up to 30%.High
tolerance to particulates, typically up to 300um
Note:
- Includes VSS-075 VeeSpray Nebulizer Sample Tubing 0.75mm ID x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Non-aspirating. Operates best between 1.5 - 2.5ml/min
MICROMIST - THE LOW UPTAKE NEBULIZER FOR ALL ICPS
The MicroMist micro-uptake glass concentric nebulizer offers high
performance for limited sample volumes. It makes routine ICP-MS Hg
determinations possible and reduces matrix effects when used with Glass
Expansion's Cinnabar spray chamber
Suggested Operation:
AR30-07-FM06
AR30-07-FM02
AR30-07-FM01
Gas Pressure (psi)
Gas Flow (L/min)
30
0.7
Includes EZT-050 EzyFit Connector with 0.50mm
ID x 1.3mm OD x 700mm L tubing (1 unit)
47
Sample Uptake (ml/min)
6
2
1
AR30-07-FM005
AR30-07-FM06E
AR30-07-FM02E
AR30-07-FM01E
0,5
6
2
1
Note:
- Includes EL-1
EzyLok Connector Kit
- This nebulizer
supersedes AR30-07FM06
AR30-07-FM005E
0,5
POLYCON - FOR ROUTINE HIGH PRECISION HF ANALYSES
Suggested Operation:
AR30-07-CP2
AR30-07-CP06
AR30-07-CP02
AR30-07-CP01
AR30-07-CP005
The PolyCon concentric nebulizer represents the choice nebulizer for high
precision analyses involving samples digested in HF. The PolyCon has been
used successfully in ICP desolvators such as the MCN-6000, where high
temperatures are encountered. It has become a favourite in the semi
conductor industry, and has enabled analysts to produce accurate (r = 0.9998)
calibration curves for low-ppt levels of Na, K, Fe and Ca in 30% hydrogen
peroxide
Gas Pressure (psi)
Gas Flow (L/min)
Sample Uptake (ml/min)
30
0.7
- Includes STT-075 Standard Sample Tubing
2
0.75mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-050 Standard Sample Tubing
0,6
0.50mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-050 Standard Sample Tubing
0,2
0.50mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-025 Standard Sample Tubing
0,1
0.25mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-025 Standard Sample Tubing
0,05
0.25mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
OPALMIST - IDEAL FOR THE GEOCHEMISTRY & SEMICONDUCTOR INDUSTRY
The OpalMist PFA concentric nebulizer represents the choice nebulizer for
high precision analyses involving analyses requiring high chemical resistancy
to HF, alkalis and organics. It also provides excellent results for trace
analyses.
Suggested Operation:
AR30-07-PFA2
AR30-07-PFA06
AR30-07-PFA02
AR30-07-PFA01
AR30-07-PFA005
Gas Pressure (psi)
Gas Flow (L/min)
30
0.7
- Includes STT-075 Standard Sample Tubing
0.75mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-050 Standard Sample Tubing
0.50mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-050 Standard Sample Tubing
0.50mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-025 Standard Sample Tubing
0.25mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
- Includes STT-025 Standard Sample Tubing
0.25mm ID x 1.3mm OD x 700mm L (1 unit)
- Includes SNP-1 Nebulizer Hose Clip (1 unit)
48
Sample Uptake (ml/min)
2
0,6
0,2
0,1
0,05

RF COIL FOR AXIAL, DUO,
Read also general information talking about coils services.
70-900-4000S
TJA Iris, Silver
Liberty Series 2, Vista
& MPX
70-900-4000G
TJA Iris, Gold
Liberty Series 2,
Vista & MPX
70-900-4000T
Installation Tool - TJA
Iris Axial/Duo
NEBULIZER AND CHAMBER CONNEXION






EASY LOCK ARGON CONNECTOR
Promotes user safety
Stiffening of argon supply tube is no longer a
problem
Eliminates bonding of argon supply tube to nebulizer
side arm
Suitable for Glass Expansion's glass nebulizers
which have the EzyLok side arm
Can be used with 4mm nylon tubing or standard
6mm soft tubing
EL-2
EL-1
Constant argon supply and RF power are the two most important requirements for good ICP short term
stability. For example, a half-percent leak of argon can generate RSD's of worse than 2%. The most common
cause of argon leaks at nebulizer ports is a stiffening of the argon supply tube over time, leading to a
consequent loss of seal.
The EzyLok connection is made with our specilally formed nebulizer side arm, which allows it to be pushed
and locked securely into the popular 'One Touch Fitting' which incorporates a flexible o'ring seal. To
disconnect the nebulizer, simply push on the release button located at the top of the fitting.
The EzyLok connection also improves safety by preventing broken nebulizer side arms. When argon supply
tubes made from all or part silicon are used, they tend to bond strongly to the nebulizer glass side arm.
Usually ICP users remove the bonded tubing by cutting it away bit by bit with a sharpe blade...a very
hazardous operation! The EzyLok easily connects and disconnects the argon supply tube to the nebulizer side
arm.
Réf
EzyLock GLASS EXPANSION
EL-1
Comprenant
QSM-4
70-808-0735
SNP-1
EL-2
Comprenant
QSM-4
70-808-0735/2
SNP-1/6
6409-16
EzyLok Kit (for glass concentric nebulizers)
EZT-025
EZT-050
EZT2-050
EZT-075
EZT2-075
EzyFit with 1.3mm OD x 0.25mm ID x 700mm long sample tube (PKT. 10)
EzyFit with 1.3mm OD x 0.50mm ID x 700mm long sample tube (PKT. 10)
EzyFit 0.50 ID Sample Tube (PKT.10) 1.58mm x 0.50mm ID x 2000mm long
EzyFit with 1.3mm OD x 0.75mm ID x 700mm long sample tube (PKT. 10)
EzyFit with 1.3mm OD x 0.75mm ID x 2000mm long sample tube (PKT. 10)
EzylLok Connector for 4mm tubing
EzyLok 6 mm Hose Adaptor
Hose clip, 6 mm
EzyLok retrofit Kit, for pour all nebulzer
EzylLok Connector for 4mm tubing
2 x EzyLok 6 mm Hose Adaptor
Hose clip, 6 mm
Tygon Tubing 34mm Piece
EzyFit
49
EZT-16/50
EZT-16-25
EZT-16-07
EZT-16-75
EZTS-16-75
EZT-0703
EZTFE-050
EzyFit with 1/16 inch OD X 0.50mm ID x 700mm long sample tube (PKT. 10)
EzyFit with 1/16 inch OD X 0.25mm ID x 700mm long sample tube (PKT. 10)
EzyFit with 1/16 inch OD X 0.07mm ID x 700mm long sample tube (PKT. 10)
EzyFit with 1/16 inch OD X 0.75mm ID x 700mm long sample tube (PKT. 10)
EzyFit with 1/16 inch OD X 0.75mm ID x 1500mm long sample tube (PKT. 10)
EzyFit with 0.75mm OD x 0.3mm ID x 700mm long sample tube (PKT. 10)
EzyFit with 1.3mm OD x 0.50mm ID x 700mm long Tefzel sample tube (PKT. 10)
STT-025
STT-050
STT-075
STT-16/25
STT-0703
STT-16/50
TFE-050
Standard Sample Tubing 1.3mm OD x 0.25mm ID x 10m long
Standard Sample Tubing 1.3mm OD x 0.50mm ID x 10m long
Standard Sample Tubing 1.3mm OD x 0.75mm ID x 10m long
Standard Sample Tubing 1/16 inch OD x 0.25mm ID x 10m long
Standard Sample Tubing 0.75mm x 0.30mm ID x 10m long
Tube échantillonneur standard 1/16" OD x 0.50mm ID x 10m long
Standard Sample Tubing 1/16 inch OD x 0.50mm ID x 10m long
Standard sample tubing (ptfe)
Other tubes and clips
VeeSpray Nébuliseur Tube échantillonneur (PKT. 10)
PolyCon/VeeSpray Joint et visse Kit (10 Pcs)
PolyCon/VeeSpray joint Tube échantillonneur O'rings
Nébuliseur Pressure Hose Clips (PKT 10)
VSS-075
VKT-0118
V-001
SNP-1
808-0126
PolyCon Thread Cap
PFA sample tubing
PFT-16/07
PFT-16/13
PFT-16/18
1/4PFA-HW
PFA Sample Tubing 1/16 inch OD x 0.07mm ID x 10m long
PFA Sample Tubing 1/16 inch OD x 0.13mm ID x 10m long
PFA Sample Tubing 1/16 inch OD x 0.18mm ID x 10m long
PFA Tubing 1/4 inch X 1/8 inch x 1 Meter
TEFLON TUBES AND CONNEXION FOR
CHAMBERS



UNIFIT CONNECTOR
Easy to use
Connect to the chamber drain tube


EZYLOCK FOR THERMOSTATED
CHAMBER
Ease connexion of nylon, Teflon, Polyamides,
polyuréthane de ¼’’ tubes
Réf
VT-009
VT-9/1.5
VT-10/2
S-009
KZ-009
V-044
JC-13
KCM-14
KCM-29
Joints GLASS EXPANSION
Teflon Coated Viton O'rings Pkt. 10 (for GE cyclonic's, nebulizer seal)
Teflon Coated Viton O'rings Pkt. 5 (for 12mm small nebulizer adaptor seal)
Teflon Coated Viton O'rings Pkt. 10 (16mm large nebulizer adaptor seal)
Silicon O'rings Pkt 10
Kalrez O'ring
Viton o-ring for base of HF Tracey spray chamber (PKT 10)
GLASS EXPANSION Clip et connecteur
Metal Ball Joint Clip
Joint Clip B14-Nickel
Joint Clip KCM29-Nickel
QSM-1/4-4
EzyLok Connector for 1/4 inch Tubing, pack of 4 (suitable for jacketed spray
chambers)
UFT16-75
UFT-075
21-808-0818
21-808-0631
UniFit with 1/16 inch OD X 0.75mm ID x 700mm long sample tube (PKT. 3)
UniFit with 1.3mm OD X 0.75mm ID x 700mm long sampe tube (PKT. 3)
12mm Spray Chamber/Neb Adaptor Set - for Cinnabar
Aridus Nebulizer Adaptor Plug 6mm
50
21-808-0740
21-808-0257
21-808-0944
21-808-0259
21-808-0256
70-808-0501
Teflon Mini Neb Adaptor
HF Nebulizer Adaptor - for Traceys & Twisters
HF Mini Nebulizer Adaptor - for Cinnabars
Nebulizer Adaptor 12/6 - for Cinnabar
Nebulizer Adaptor 16/6 - for Tracey & Twister
O'ring Set for Neb Adaptor 16/6
70-100-0237
Helix Seal (Pkt. 4)
70-100-0152
Helix Locking Screw
21-808-1010
Nebulizer Teflon Adaptor Plug 6/35
O RING AND CONNEXION FOR TORCHS
Réf
GLASS EXPANSION connecteurs
GazFit connectors, pour tube lateral de 8 mm OD, Packet de 2
GazFit connectors, pour tube lateral de 6 mm OD, Packet of 4
GazFit connectors, 2 pour tube lateral de 6 mm OD, 2 pour
GAZ-0604
tube lateral de 4mm OD Packet de 4
GAZ-05
GazFit connectors, pour tube lateral de 5 mm OD, Packet of 4
GAZ-04
GazFit connectors, pour tube lateral de 4 mm OD, Packet of 4
Extractor Tool for Semi Demountable Torch, 12.2mm
31-100-0109
(Finnigan)
Extractor Tool for Semi Demountable Torch, 14.2mm
31-100-0106
(standard size)
31-100-0105
Extractor Tool for Semi Demountable Torch, 15.2mm (Varian)
Joint Viton revêtu téflon pour torche avec raccord boule Pkt.
70-VT-011
10
EzyGlide chiffon lubrifiant pour faciliter le montage et le
70-EZG-CLOTH
démontage des tubes internes des tubes
GAZ-08
GAZ-06
SAFETY CCESSOIRIES
Réf
SAFEGLOVE-sml
SAFEGLOVE-med
SAFEGLOVE-lge
SAFEGLASS-sml
SAFEGLASS-lge
GLASS EXPANSION connecteurs
Safety Gloves, Small
Safety Gloves, Medium
Safety Gloves, Large
Safety Glasses, Small
Safety Glasses, Large
51
RF COILS : GENERALITY
Glass Expansion RF Coils - represent the highest
quality in design and manufacturing










WHY TO CHANGE YOUR RF COILS
Regular replacement of corroded coils reduces the load on the RF generating system
Changing corroded coils increases enery transfer, resulting in a more robust plasma and
generally higher analytical line intensities.
ADVANT AGE OF GLASS EXPANSION RF COILS:
High quality and consistent plating of our coils promotes extended coil life
Each coil is supplied on a plastic former ensuring correct dimensions and easier installation
Each coil is supplied in a special protective container to ensure correct dimensions are
maintained, and the coil arrives corrosion free
Correct alignment of the coil with respect to the torch body reduces devitrification of the outer
tube
Reusable alignment tools ensure correct installation every time. Our CD with Do-It-Yourself
instructions saves time
THE ROLE OF THE RF COILS
The RF coil is the last component in the electrical system used to generate an Argon plasma. Being the last
component, there is great importance placed on the coil for transferring RF energy to the plasma.
There are three factors affecting the role of the RF Coil in transferring energy:



Concentricity and alignment - these are very important in producing a correctly shaped plasma, which
consistently needs to be located in the same position. The Glass Expansion RF Coil installation tools
with plastic coil supports make this possible every time.
Correct dimensions - being part of the RF system, the coil dimensions are also important in the tuning
of the circuit. Slight changes in dimensions can produce small changes in resistance or inductance
and are normally compensated for in the tuning circuitry of the system.
Base metal/plating - the most efficient conductor of RF energy is pure silver followed by annealed
copper. There is very little difference in the conductivity of these materials but there is a great deal of
difference in cost. Copper is used as the base material of all commercially available coils but different
manufactures use different plating materials. Silver has the best conductance and gold the best
corrosion resistance.
Being exposed to the environment of the torch box, the condition of the coil has a major effect on the
efficiency of transferring energy to the plasma. The greater the corrosion, the larger the electrical energy that
is required to produce a plasma of the same power. This transfers undue stress on the rest of the electrical
components used in the RF system, possibly contributing to premature failure.
There are three main areas that affect the transfer of energy from the plasma to the sample.
52



Argon gas flow rates and quality.
The torch containing the plasma. The torch needs to be concentric and of the highest quality Quartz.
If the outer tube becomes devitrified, the transfer of energy is restricted due to losses incurred by
heating on the surface of the outer tube, thereby reducing the available energy for the atoms.
The RF generating system, including the coil. All RF systems available in commercial ICP instruments
are capable of supplying the required power. The one component that is common to all instruments is
the coil. Each instrument has a different type of coil, with different dimensions and different number of
turns.
RF coils are one of a number of critical components needed to produce a plasma. With the Glass Expansion
RF coils and installation tools it is now possible to replace your coil on a more regular basis without the cost of
a service visit. This ensures this part of the RF system continues to work in peak condition.

BENEFITS OF M AINTAINING YOUR RF COILS
The main problem with an RF coil is corrosion, whether from heat or chemical oxidation. Corrosion reduces
the efficiency of energy transfer to the plasma increasing the stress applied to other components in the RF
generating system. In particular, the RF Power Tube or RF amplifying FET's
have to generate more power to deliver the same amount of energy to the
plasma.
Coils are the transmitters of this
RF energy. The efficiency of
different materials in conducting
RF energy plays an important role
in the overall plasma efficiency.
Metal oxides do not conduct RF
as well as pure metal. In particular
copper sulphate is a very poor
conductor, whereas silver oxide
has a much smaller effect on
efficiency. The most RF efficient
metals are pure silver IAC (International Annealed Copper Standard) 105,
annealed copper IAC 100, and gold IAC 74.
If heat is the biggest problem then the best way to deal with this is to use a coil that is plated in a highly
reflective material such as silver. Silver plating however does produce a tarnish appearance after a period of
use. To obtain the best life out of a coil in this situation, the coil should be cleaned frequently with a tarnish
remover. This will eventually lead to the removal of the silver plating. However, if the tarnish is not removed,
excessive heat can build up due to higher absorption and lead to the plating flaking away from the copper
tubing. This exposes bare copper areas that will deteriorate at a faster rate. Copper will oxidise much quicker,
thereby leading to possible arcing between coils, and lower energy transfer to the plasma.
Chemical corrosion is best dealt with using a gold-plated coil. The plating process is critical in the
performance of the coil. Gold plating can produce porous coatings, which allow a chemical attack on the
copper tubing, thereby rendering the plating useless. The plating process used in the production of the Glass
Expansion gold plated coils is designed to remove the porous effect yet still maintain the high purity plating. In
time, the gold plating will show signs of copper sulphate formation on the surface. This occurs due to copper
migration through the plating. For best performance these deposits should be removed using an abrasive
metal polish that is free of acid. Unfortunately once this starts to occur the migration will occur at a faster rate
and the coil should be replaced.
Periodic cleaning of your coil will extend the lifetime and produce a more consistent plasma. This in turn will
lead to better analytical results. It will also reduce stress on the RF generator.
.
53

ADVANT AGE OF GLASS EXPANSION RF COILS
Introduction
Glass Expansion Coils are produced from the highest quality raw materials and plated using prescribed
methods to obtain maximum RF (Radio Frequency) transmission efficiency. There are numerous papers
published on RF transmission with regard to conductor and coating resistance.
Plasma Generation
The generation of a plasma is the result of complex RF circuit design. Many of the environmental problems
that affect the coil have little effect on the operation of the RF generator, except that corrosion produces an
added load. In particular, corrosion of the coil has a significant effect on the performance and robustness of
the plasma. Changing to a new coil reduces the load on the RF generator, since the current required to
produce the same level of power is reduced as the resistance of the coil is reduced. Hence, having a coil with
little or no corrosion has a positive effect on the longevity of the PA (Power Amplifier) Tube or RF FET's (Field
Effect Transistor) due to the lower current required.
Conductivity
This can be explained by the conductivity of pure metals and oxides. Pure grade copper has an IACS
(International Annealed Copper Standard) of 100, silver has an IACS of 105, and Gold has an IACS of 74. In
referencing the ICAS system a higher IACS indicates higher conductivity. The following websites contain
information on the IACS for various metals.
www.amm.com/index2.htm?/ref/conduct.HTM www.eddy-current.com/condmat.htm
The formation of an oxide on the surface of the coil reduces the conductivity of the coil and hence it's
performance. Depending on the instrument and the control feedback system, this can be seen by a reduction
in the intensity for an element of the same concentration over the life of the coil.
Corrosion Resistance
From a conductivity point, the best material to make a coil from would be pure silver but, due to the high cost
this is impractical. Copper is the next best material, but the copper must be of an acceptable grade and
contain a minimum of contaminants. The copper used by Glass Expansion has a purity of 99.9% minimum.
Once the base material is fixed, the environmental conditions under which the coil is placed need to be
considered. The environmental conditions in the torch box include corrosive gases and high temperatures.
These vary with instruments and plasma orientation (Radial or Axial). This leads to the use of plating of the
copper coils to help prevent unwanted corrosion, with the two most common materials being Silver and Gold.
The plating process is vital to the conductivity of the coil. There are many different types of plating procedures
that result in varying degrees of conductivity. The procedure used by Glass Expansion does not use additive
brighteners or corrosion inhibitors in the plating bath. This produces a dull coating, which is then manually
polished to give a final bright appearance, resulting in a coil that retains the highest possible IACS rating.
Coils should be continually cleaned to remove the build up of surface oxidation. The rate of corrosion is higher
for Copper, followed by Silver, then Gold. There are however, distinct advantages to using Silver. The plating
process for Silver leaves a more even surface allowing fewer sites for chemical attack. The conductivity of
Silver is much higher than that of Gold, but Gold does offer a greater protection in more aggressive
environments.
Benefits
Glass Expansion recommends coils in Silver and Gold due to better conductivity and corrosion resistance.
 There are fewer problems with a silver-plated coil with arcing between windings, compared to the
standard copper coil. This in turn lengthens the life of the coil.
 Another advantage is our installation guide and alignment tools. These allow Do-It-Yourself
installations, saving the expense of a service engineer. These installation guides written on Compact
Discs, will show how to set up and align your torch and coil to the exact specifications. This reduces
torch wear due to misaligned coils, especially in axial systems.
 All coils produced by Glass Expansion will be shipped with a coil former. This former holds the coil in
the correct dimensions during shipping and installation. The tool can also be used to check the
dimensions from time to time, or to reset after an accidental knock.
 The packaging of Glass Expansion's coils will ensure that the coil arrives at the customer's site, in the
correct dimensions.
54

GLASS EXPANSION INSTALLATION TOOL KIT FOR COILS
Save the cost of a service call
 Correct alignment of the RF coil with respect to the torch body reduces divitrification on the outer tube
 Re-usable alignment tools are available separately, to ensure correct installation of the coil every time
 Our easy to follow Do-it-Yourself installation instructions save you time, and the cost of a service call
All Kits Contain:
 An Installation Tool
 Required Spanner/s
 Instructional CD
RF Coil Installation Kits:
 All tools are designed specifically for each instrument
 Designed to align coil to torch mounting bracket
 DIY Instructions
 Minimise ICP downtime
55