ASEP BET Sample Submission
ASAP 2010/2020 Data Sheet
Completed by Applicant
Please Print Clearly
Surface Area only
Surface Area & Pore Information
Name:-___________________
Supervisor:-_____________________
Department: - _____________________
Extension: - ________________
Room No. ____________
Date Submitted:-________________
Sample Code: - ________________
Maximum Temperature Stable at ____________o C.
Expected Surface Area
___________
Must be given
An estimate must be given
Expected Porosity
____________
Chemical Formula
_________________________________
Further Information e.g. (Toxicity, Explosive, Hydroscopic)

Enough sample must be provided (2/ square route of expected surface area)grams

Sample code should be a maximum of 8 characters (letters or numbers)

Surface area of less than 20 and Greater than 250 M2/gram may be inaccurate with
present instrument setup (Nitrogen). These take longer to do and from above more
sample is required.

Samples will be heated to 50o C less than maximum temperature to a maximum of 350o C
in Vacuum.
BET001/06
Student
12/02/2016