Part 6

advertisement

Part 6

MORE INFORMATION ABOUT

WHMIS

The Workplace Hazardous Materials

Information System regulations apply to all workplaces that use, store, or handle controlled products. There are a few circumstances involving potentially hazardous products where the WHMIS regulations do NOT apply. They are as follows:

· "WHMIS Exemptions"

· Restricted Applications

· Hazardous Wastes

We will now take a closer look at each of these categories.

WHMIS EXEMPTIONS

WHMIS legislation, both federally and provincially, does not apply to:

* WOOD OR PRODUCTS MADE OF WOOD - this includes products such as lumber, plywood, particle board, and wood products coated with additives such as paint or preservatives. Additives may however be subject to WHMIS legislation before they are included in the finished product.

Some chemical products made from wood, but lacking the physical properties of wood, are not considered wood products and therefore are subject to WHMIS requirements (e.g.

Turpentine).

* TOBACCO OR ANY PRODUCT MADE OF TOBACCO - these materials are governed by their own federal legislation.

WHMIS EXEMPTIONS (cont)

MANUFACTURED ARTICLES - A "manufactured article" refers to any item that is formed to a specific shape or design during its manufacture, whose intended use depends on its shape or design, and under normal conditions of use will not expose people to a controlled product.

* PRODUCTS WHICH ARE BEING TRANSPORTED or

HANDLED UNDER the REQUIREMENTS of the

TRANSPORTATION of DANGEROUS GOODS ACT

(T.D.G.) - These materials are covered by the T.D.G. act and regulations while in transit, but become subject to the WHMIS regulations at the point of loading and unloading.

RESTRICTED APPLICATIONS - PARTIALLY EXEMPT

PRODUCTS

Partially exempt products are materials which are exempted from the WHMIS legislation because they are subject to labelling and information requirements under other federal legislation.

As a result of this federal exemption, the employer is not required to obtain supplier labels or MSDSs to use these materials. An employer must still deliver training on the safe handling of these materials. Workplace labels must also be used when these materials are present or used in the workplace, or when they are transferred to different containers. If an MSDS sheet is available for any product it should always be made available.

The guidelines for the use, storage, handling and disposal of these products are covered under their respective acts.

PARTIALLY EXEMPT PRODUCTS

PARTIALLY EXEMPT PRODUCTS FALL INTO THE

FOLLOWING CATEGORIES:

* PRODUCTS WITHIN THE MEANING OF THE

EXPLOSIVES ACT (EXPLOSIVES) - Explosives and blasting agents are excluded from WHMIS because they are regulated by the Explosives Act and Regulations.

* A COSMETIC, DEVICE, DRUG OR FOOD WITHIN THE MEANING OF THE

FOOD AND DRUG ACT (COSMETICS AND PRESCRIPTIONS) - In order for a

"cosmetic" material to qualify for an exemption under WHMIS it must be sold and

presented for use as a cosmetic. If intended for use other than this purpose the WHMIS requirements apply. For example, Acetone is found in consumer nail polish remover products and in this form is exempt from WHMIS requirements. When used as an industrial cleaning agent, this same material becomes subject to the WHMIS requirements. The Food and Drug Act is administered by Health Canada.

PARTIALLY EXEMPT PRODUCTS (cont)

A CONTROLLED PRODUCT WITHIN THE

MEANING OF THE PEST CONTROL

PRODUCTS ACT (PESTICIDES) - The Pest

Control Products Act is administered by

Agriculture Canada.

* A CONTROLLED PRODUCT WITHIN

THE MEANING OF THE ATOMIC

ENERGY CONTROL ACT (RADIOACTIVE SUBSTANCES) - These substances are strictly controlled and are used primarily in medicine and dentistry or in testing and laboratory environments. The transportation and usage of these hazardous materials is administered by the Atomic Energy Control Board

(Canadian Nuclear Safety Commission).

PARTIALLY EXEMPT PRODUCTS (cont)

A RESTRICTED MATERIAL THAT IS

PACKAGED AS A CONSUMER

PRODUCT - The partial exemption for consumer goods applies to products that are packaged for sale to consumers through the retail system. WHMIS requirements may still apply to these products. For example, bleach, when sold as a consumer product is partially exempt, however, becomes subject to WHMIS requirements when used in the workplace.

WHMIS EXCEPTIONS

Under the WHMIS regulations, a controlled product cannot be used, stored or handled in the workplace unless the employer has complied with the WHMIS requirements regarding labels,

Material Safety Data Sheets and worker training.

What would you do if a hazardous material arrived at your workplace and you do not fulfill these requirements?

WHMIS EXCEPTIONS (cont)

Under the WHMIS system the employer is allowed to store a controlled product in the workplace while trying to obtain a label or MSDS from a supplier or while trying to obtain the information needed to produce a workplace label or MSDS.

This is considered acceptable if the employer affixes either a workplace label or a label stating that the product is hazardous and cannot be used or handled at the workplace until further information is obtained.

If a supplier informs you that labels or an MSDS are not available for a controlled product you should immediately notify the government department responsible for

OH&S in your jurisdiction.

WHMIS EXCEPTIONS (cont)

You may also receive a controlled product that has been imported into

Canada and shipped directly to your workplace that does not have the proper WHMIS labelling. In this circumstance the employer is required to label the controlled product with a label that meets the requirements of a supplier label as outlined in the Controlled Products Regulations.

HAZARDOUS WASTE

The WHMIS regulations have limited applications with respect to hazardous waste.

Where any hazardous waste is generated or stored in the workplace, the employer is expected to:

* Identify all containers containing hazardous waste

* Develop a method of hazardous waste container identification that is understood by all workers. This may include a number of methods (e.g. colour coding, or warning signs)

* Train any worker who may be exposed to hazardous waste regarding the materials safe handling and storage

While the employer is required to comply with the above, they are not required to provide workplace labels or material safety data sheets for containers of hazardous waste.

Download