Sliding gate type EcoGate Perimeter Protection Group Product Description Pos. Amount Text ___ EUR/Unit EUR/Total ______ piece of cantilevered sliding gate system PPG type “EcoGate” supply, to be installed properly aligned Only type-tested products that are approved according to DIN EN 132421-1:2011-06 are permitted. Clear opening from 6.000 mm to 10.000 mm: 6.000 mm 7.000 mm 8.000 mm 9.000 mm 10.000 mm Height incl. 100 mm ground clearance: Height: 1850mm Height: 2050 mm Opening directions; viewed from the outside: to the left to the right Drive: hand operated electric drive 24Vdc (max. 6m LD) electric drive We-Tronic II (AC 400V, 3P + N) electric Drive We-Tronic II FU (230V AC, 1P + N) Corrosion protection/ coating: The patented Tri-protect® corrosion protection system fulfills the requirements of the ISO EN 7253/ ISO 9227, salt spray test. RAL 7016 RAL 7035 RAL 6005 RAL 7030 RAL 9010 Optionally, the gate filling can be colored in a different color as the gate frame. Colors of filling: RAL 7016 RAL 6005 RAL 9010 RAL 7035 RAL 7030 Construction: Lower spar: PPG special bearing profile 190/155 mm Upper spar: RR 120/120 mm Frieze rod: RR 100/100 mm Filling: Welded mesh Palisade sheets Perforated sheets Document: 1105427 Version: b Original version created: 17.09.2013 revised: 01.03.2014 Subject to change Page 1 of 6 Sliding gate type EcoGate Perimeter Protection Group Product Description Pos. Amount Text EUR/Unit EUR/Total Consisting of: The structure corresponds to the static requirements and calculations. The design loads in accordance with DIN 1055 are included in the gate construction. The gate body is carried out horizontally cantilevered through two successively-mounted roller blocks. Said rollers are mounted on ball bearings and have high capacity. TÜV type tests are mandatory. A unified performance declaration of the European Community Machinery Directive EN 2006/42 EC must be enclosed. The special design of the lower spar is statically sized with a minimum tensile strength of 500 N / mm ² and prepared for the concealed accommodation of the support structure. The gate body has an oblique load end with an adjusting unit for a durable, dimensionally stable bias voltage. The entire roller-mechanism is mounted on ball bearings and consists of two supporting roles as well as a supporting role to accommodate the shear forces. The supporting structures are axial and radial loads and low maintenance. The guide post consists of a QR 140 mm with a guide unit. This is equipped with 2 polyurethane wheels with a 65 ° Shore A hardness. This design eliminated the aluminium wearing strips on the gate leaf. Contamination by aluminium abrasion is therefore excluded. Inlet post for fixing in closed state is also made of a QR 140 mm with an adjustable inlet leading shoe and fork. Outlet post for fixing in open state consists of a 100 mm QR with an adjustable ramp shoe. Length of the gate body and back-up space Clear opening mm Length mm Back-up space mm 6.000 8.520 8.700 7.000 10.790 10.970 8.000 10.790 10.970 9.000 13.270 13.450 10.000 13.270 13.450 Locking: Optional for manual execution: Compact safety lever mortise lock with galvanized, stainless steel lock, profile cylinder with 3 keys and profile cylinder rosettes of light metal. Electric drive: 24V/DC: The Type We-Tronic "Eco" matches highest industry standard. The safety device is mandatory for the control type We-Tronic “Eco” (automatic mode latching), according to UVV guidelines. The two safety bars on guide posts, incl. associated evaluation secure shearing and crushing. The pinch points at the main closing edges are secured by an electronic power limit of the drive and the light beams. The system is self-monitoring and operates according to the guidelines for powerDocument: 1105427 Version: b Original version created: 17.09.2013 revised: 01.03.2014 Subject to change Page 2 of 6 Sliding gate type EcoGate Perimeter Protection Group Product Description Pos. Amount Text EUR/Unit EUR/Total operated doors and gates. The gate system complies with the latest European standards including EN 12453 and EN 13241-1 and the requirements of the trade association. The drive is located inside of the sliding gate, fixed to the boom of the front roller block; parallel to the sliding gate. The complete drive and control are positioned below a lockable stainless steel cover. We-Tronic II: The safety device is mandatory for the control (automatic mode), according to UVV guidelines. Up to 5 safety bars and light barriers, incl. associated evaluation secure all shearing and crushing. The system is selfmonitoring and operates according to the guidelines for power-operated doors and gates. The transit area is additionally secured by the prescribed light beams. Optional LED (*) on the guide rails or running post allow to display the different states of the gate. Following modes can be generated e.g.: Green: open gate, flashing yellow: gate in motion and red: closed gate. In addition, the We-Tronic II allows controlling of optional traffic lights and rotating beacons. The drive of the door is effected both at the 24V/DC motor as well as at the We-Tronic II in conjunction with a 0.18 kW drive motor via a maintenance-free and damped plastic rack (Modul5) which is fixed to the sliding gate. This compensates all load-change reactions. The plastic gear rack does not require grease lubrication and thus cannot be contaminated. Installation: The gate is mounted in the correct height, plumb and properly aligned on concrete foundations according to the manufacturer's instructions. Electrical supply lines on site. Foundation details in mm: Clear opening: 6.000 7.000 8.000 9.000 Gate leafs 8520 10790 10790 13270 Foundation spacing 5620 6620 7620 8620 Foundation Length x Width x 3.250 x 900 x 800 Depth: (L x B x T) Foundation details for posts: 600 x 600 x 800 (L x B x T) Document: 1105427 Version: b Original version created: 17.09.2013 revised: 01.03.2014 Subject to change 10.000 13270 9620 Page 3 of 6 Sliding gate type EcoGate Perimeter Protection Group Product Description Pos. Amount Text EUR/Unit EUR/Total Note: Note: The suggested foundation sizes are manufacturer recommendations, in order to provide a technically stable sliding gate situation. The subsoil for foundations must be established frost-free and allow a soil pressure of 200 kN / m². Concrete quality: C 25/30 Ground class: 2–4 Material and assembly per piece ___ ______ piece extra charge for additional fence connection guiding post welded mesh fence connection with clip bolts Fence connection with stainless steel vario brackets Chain link fence connection Chain link fence connection with connecting flange (elkosta) Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for additional fence connection entry post welded mesh fence connection with clip bolts Fence connection with stainless steel vario brackets Chain link fence connection Chain link fence connection with connecting flange (elkosta) Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for rotating beacon on the guiding post (control side) on the guidingt post with warning time, adjustable Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for traffic light (only for We-Tronic II, view from outside) on the entry post red light green light red and green light Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for table probe (only for We-Tronic II) as open / stop / close as open / stop / close with optical display as open / stop / close with optical display, automatic on / off prepared for on-site table probe Extra charge per piece ___ ___________ EUR___________ EUR ___________ EUR___________ EUR ______ piece extra charge for high quality wireless remote control (only We-Tronic II) in 4-channel design 868 MHz Fully mounted ready for operation with antenna. Extra charge per piece Document: 1105427 Version: b Original version ___________ EUR___________ EUR created: 17.09.2013 revised: 01.03.2014 Subject to change Page 4 of 6 Sliding gate type EcoGate Perimeter Protection Group Product Description Pos. Amount Text ___ EUR/Unit ______ piece extra charge for high quality wireless transmitter (only We-Tronic II) in 2-channel design 868 MHz Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for high quality wireless remote control (24V DC) in 1 –channel design 433 MHz Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for high quality wireless transmitter (24V DC) in 1 –channel design 433 MHz Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for anti-climbing device (only for gates above 1850mm height) Serrated strip 40mm heigh Extra charge per piece ___ ___________ EUR___________ EUR ______ pair extra charge for additional light beam barrier (consisting of 1 x transmitter and 1 x receiver) Extra charge per pair ___ ___________ EUR___________ EUR ______ piece extra charge for gate intercom system with 1 bell button and 1 house telephone make Comelit with 2 bell buttons and 2 house telephones make Comelit with 1 bell button and 1 house telephone make Siedle with 2 bell buttons and 2 house telephones make Siedle Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for loop detector as single detector as double detector Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for induction loops to be laid under pavement with function „opening“ to be laid under pavement with function „safety“ to be laid in tarmac with function „opening“ to be laid in tarmac with function „safety Extra charge per piece ___ EUR/Total ___________ EUR___________ EUR ______ piece extra charge for timer as 7 day timer as one year timer, to be programmed by others Extra charge per piece Document: 1105427 Version: b Original version ___________ EUR___________ EUR created: 17.09.2013 revised: 01.03.2014 Subject to change Page 5 of 6 Sliding gate type EcoGate Perimeter Protection Group Product Description Pos. Amount Text ___ EUR/Unit ______piece extra charge for partly open / pedestrian access (additional stop position) not active active Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for automatic closing not active active Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for activation via firm alarm system supplied by others on site Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for loop detector as single detector as double detector Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for induction loops to be laid under pavement with function „opening“ to be laid under pavement with function „safety“ to be laid in tarmac with function „opening“ to be laid in tarmac with function „safety Extra charge per piece ___ ___________ EUR___________ EUR ______ piece extra charge for installation of induction loops Extra charge per piece ___ EUR/Total ___________ EUR___________ EUR ______ piece extra charge for activation via firm alarm system supplied by others on site Extra charge per piece Manufacturer: Document: 1105427 Version: b Original version ___________ EUR___________ EUR Perimeter Protection Germany GmbH Johann-Reineke-Str. 6 – 10 D-33154 Salzkotten Tel.: (+49) (0) 5258/500-70 www.perimeterprotection.net info@perimeterprotection.de created: 17.09.2013 revised: 01.03.2014 Subject to change Page 6 of 6