Hellenic Accreditation System
Annex F1/Β14 to the Certificate No. 64-5
SCOPE of ACCREDITATION
of the
Testing Laboratories
of the
Materials Industrial Research and Technology Center S.A.
(MIRTEC S.A.)
(Thiva Laboratory)
Materials / Products
to be tested
Types of test / Properties to be measured
Harmonized Standard/ Applied
methods/ Techniques to be used
Physical tests
1. Aggregates
Tests for geometrical properties – Part 1: Determination
of particle size distribution – Sieving method
ELOT EN 933-1: 2012
Test for geometrical properties – Part 3: Determination of
particle shape – Flakiness index
ELOT ΕΝ 933-3: 2012
Test for geometrical properties – Part 8: Assessment of
fines. Sand equivalent test.
Tests for mechanical and physical properties – Part 2:
Methods for the determination of resistance to
fragmentation (Los Angeles test)
Page 1 of 3
ELOT ΕΝ 933-8: 2012
ELOT ΕΝ 1097-2: 2011
Test for mechanical and physical properties – Part 6:
Determination of particle density and water absorption.
ELOT ΕΝ 1097-6: 2013
Tests for thermal and weathering properties – Part 2:
Magnesium sulfate test (test of rock health).
ELOT ΕΝ 1367-2: 2010
Annex F1/B14 to the Certificate ESYD No.64-5
27.05.2014
Materials / Products
to be tested
1. Aggregates (cont.)
2. Adhesives for tiles
(cementitious
adhesives)
Types of test / Properties to be measured
Harmonized Standard/ Applied
methods/ Techniques to be used
Tests for thermal and weathering properties of aggregates
- Part 4: Determination of drying shrinkage
ELOT EN 1367-4: 2008
Tests for thermal and weathering properties of aggregates
- Part 1: Determination of resistance to freezing and
thawing
ELOT EN 1367-1: 2008
Tests for thermal and weathering properties of aggregates
- Part 3: Boiling test for ''Sonnenbrand basalt''
ELOT EN 1367-3: 2001
Requirements, evaluation of conformity, classification and designation
European Regulation 305/2011/Eε
ΕLΟΤ EN 12004+Α1: 2012 for cementitious adhesives
3. Clay materials
Determination of open time
ΕLΟΤ EN 1346 Ε2: 2008
Determination of wetting capability
ΕLΟΤ EN 1347 Ε2: 2008
CO2 determination with differential thermal gravimetric
analysis (TG-DTA)
In house method (Method code
LABENV-403)
Mechanical tests
1. Concrete
2. Cement
3. Aggregates
4. Adhesives for tiles
(cementitious
adhesives)
5. Concrete paving
flags
Page 2 of 3
Testing hardened Concrete. Compressive Strength of test
Specimens.
ELOT EN 12390-3: 2010
Methods of testing cement – Part 1: Determination of
strength
ELOT EN 196-1 E3: 2005
Methods of testing cement – Part 3: Determination of
setting times and soundness
ELOT ΕΝ 196-3+Α1:2009
Methods of testing cement – Part 6: Determination of
fineness (Blaine method)
ELOT EN 196-6: 2010 §4
Tests for mechanical and physical properties of
aggregates - Part 8: Determination of the polished stone
value
ELOT EN 1097-8: 2010
Tests for mechanical and physical properties of
aggregates - Part 1: Determination of the resistance to
wear (micro-Deval)
ELΟΤ EN 1097-1: 2011
Requirements, evaluation of conformity, classification and designation
European Regulation 305/2011/EE
ΕLΟΤ EN 12004+Α1: 2012 for cementitious adhesives
Determination of tensile adhesion strength for
cementitious adhesives
ΕLΟΤ EN 1348 Ε2: 2008
Determination of slip
ΕLΟΤ EN 1308 Ε2: 2008
Requirements and test methods – Measurement of
bending strength and breaking load
ELΟΤ ΕΝ 1339 + AC: 2003 / Annex
F
Annex F1/B14 to the Certificate ESYD No.64-5
27.05.2014
Materials / Products
to be tested
Types of test / Properties to be measured
Harmonized Standard/ Applied
methods/ Techniques to be used
Chemical tests
1. Cement
Methods of testing cement – Part 2: Chemical analysis of
cement – Determination of loss on ignition
Methods of testing cement – Part 2: Chemical analysis of
cement – Gravimetric determination of sulfates.
Methods of testing cement – Part 2: Chemical analysis of
cement – Determination of residue insoluble in
hydrochloric acid and sodium carbonate.
Methods of testing cement – Part 2: Chemical analysis of
cement – Determination of the chloride.
Methods of testing cement – Part 5: Pozzolanicity test for
pozzolanic cement
Determination of SiO2, Al2O3, Fe2O3, CaO, MgO
ELOT ΕΝ 196-2: 2013 § 4.4.1
ELOT ΕΝ 196-2: 2013 § 4.4.2
ELOT ΕΝ 196-2: 2013 § 4.4.3
ELOT ΕΝ 196-2: 2013 § 4.5.16
ELOT ΕΝ 196-5 Ε4: 2011
In house method based on
Presidential Decree 244-80
ELOT ΕΝ 1388-1:1995
ΑSΤΜ C738:2011
ASTM C927:2011
ELOT EN 27888: 1993
2. Materials and articles
in contact with
foodstuffs
3. Water (potable,
underground,
surface)
Silicate surfaces – Part 1: Determination of the release of
lead and cadmium from ceramic ware
Determination of chromium (VI) – Photometric method
for weakly contaminated water
ELOT EN ISO 18412: 2006
4. Aggregates
Test for geometrical properties of aggregates - Part 9:
Assessment of fines - Methylene blue test
ELOT ΕΝ 933-9: 2013
Determination of electrical conductivity
Tests for chemical properties of aggregates - Part 1:
Chemical analysis
A. Determination of water soluble chlorides by Volhard
method (referece method)
B. Determination of total sulfur (referece method)
C. Dermination of acid soluble sulphates
D. Determination of humus content
Determination of carbon dioxide (CO2)
5. Admixtures for
concrete, mortar and
grout
Determination of pH of aqueous solutions
(Potentiometric method)
Determination of the Alkali content of admixtures (Na2O
equivalent)
Determination of chlorine content
Determination of water soluble chloride content (Cl-)
EN 1744-1:2009 + A1:2012
ELOT ΕΝ 196-2: 2013 § 4.5.17
ISO 4316:1977
ELOT EN 480-12 E2: 2006
ELΟΤ ΕΝ ISO 1158: 1998 (with the
modifications included in ELOT EN
934-2: 2009 +A1:2012)
ELOT EN 480-10 E2: 2010
Site of assessment: Permanent laboratory premises, 72nd km Athens-Lamia National Road, Ritsona, Greece.
Approved signatories: Andreas Kalantzis, Evaggelos Mpakeas, Andreas Papandreou.
This Scope of Accreditation replaces the previous one dated 27.02.2014.
The Accreditation Certificate No. 64-5, to ELOT EN ISO/IEC 17025:2005, is valid until 28.02.2018
Athens, May 27th, 2014
I Sitaras
Laboratories Accreditation Division Manager
Page 3 of 3
Annex F1/B14 to the Certificate ESYD No.64-5
27.05.2014