SECTION 09930
STAINS AND TRANSPARENT FINISHES
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2011 - 2015 ARCAT, Inc. - All rights reserved
PART 1 GENERAL
1.1
1.2
1.3
SECTION INCLUDES
A.
Deck Coatings:
1.
Translucent finish deck coatings.
2.
Semi-transparent finish deck coatings.
3.
Solid hide finish deck coatings.
B.
Exterior Coatings:
1.
Clear finish exterior coatings.
2.
Translucent finish exterior coatings.
3.
Semi-transparent finish exterior coatings.
4.
Solid hide finish exterior coatings.
C.
Coatings for Interior Wood Surfaces:
1.
Clear finish coatings for interior wood surfaces.
2.
Translucent finish coatings for interior wood surfaces.
D.
Coatings Designed for Log Homes:
1.
Clear finish coatings designed for log homes.
2.
Translucent finish coatings designed for log homes.
3.
Semi-transparent coatings designed for log homes.
RELATED SECTIONS
A.
Section 06200 - Finish Carpentry.
B.
Section 07460 - Wood Siding.
C.
Section 09640 - Wood Flooring.
SUBMITTALS
A.
Submit under provisions of Section 01300.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage and handling requirements and recommendations.
3.
Installation methods.
4.
Cleaning and maintenance instructions.
C.
Selection Samples: Submit two sets of samples showing available colors, textures, and
09930-1
finishes.
D.
1.4
QUALITY ASSURANCE
A.
1.5
1.6
Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and
application workmanship.
1.
Finish areas designated by Architect.
2.
Do not proceed with remaining work until workmanship, color, and sheen are
approved by Architect.
3.
Refinish mock-up area as required to produce acceptable work.
DELIVERY, STORAGE AND HANDLING
A.
Deliver, store and handle materials and products in strict compliance with manufacturer's
instructions and recommendations and industry standards. Store materials within absolute
limits for temperature and humidity recommended by the manufacturer. Protect from
damage.
B.
Store products in manufacturer's labeled packaging until ready for installation.
PROJECT CONDITIONS
A.
1.7
Verification Samples: For each product specified, two samples, representing colors, textures,
and finishes to be installed.
Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under
environmental conditions outside manufacturer's absolute limits.
WARRANTY
A.
Warranty: Provide manufacturer's standard limited warranty for materials and workmanship.
PART 2 PRODUCTS
2.1
2.2
MANUFACTURERS
A.
Acceptable Manufacturer: Sikkens; Wood Finishes , which is located at: 15885 W. Sprague
Rd.; Strongsville, OH 44136; Toll Free Tel: 866-745-5367; Fax: 800-784-5460; Email:request
info (sikkens.nam@akzonobel.com); Web:www.perfectwoodstains.com
B.
Substitutions: Not permitted.
C.
Requests for substitutions will be considered in accordance with provisions of Section
01600.
COATING TYPES
A.
Coating Type: Sikkens Cetol UV Interior as manufactured by Sikkens Wood Finishes.
1.
Description: Transparent, clear waterborne stain designed for interior applications.
2.
Composition: Contains manufacturer's UV absorbent additives.
3.
Product Code: SIK09003.
4.
Color: 003 Colorless.
5.
Finish: Matte.
6.
VOC Content: 330.14 g/L.
B.
Coating Type: Sikkens Cetol SRD 250 as manufactured by Sikkens Wood Finishes.
1.
Description: Translucent, water-repellent, exterior wood finish.
09930-2
2.
3.
4.
5.
6.
7.
8.
9.
10.
C.
Composition: Alkyd resin.
Finish: Matte (1 coat).
Finish: Satin (3 coats).
Product Code: SIK14005.
a.
Color: 005 Natural Oak.
b.
VOC Content: 247.87 g/L.
Product Code: SIK14054.
a.
Color: 054 California Redwood.
b.
VOC Content: 248.21 g/L.
Product Code: SIK14078.
a.
Color: 078 Natural.
b.
VOC Content: 249.28 g/L.
Product Code: SIK14085.
a.
Color: 085 Teak.
b.
VOC Content: 249.67 g/L.
Product Code: SIK14089.
a.
Color: 089 Redwood.
b.
VOC Content: 248.77 g/L.
Product Code: SIK14996.
a.
Color: 996 Natural Light.
b.
VOC Content: 245.80 g/L.
Coating Type: Sikkens Cetol Interior WB Stain as manufactured by Sikkens Wood Finishes.
1.
Description: Waterborne interior wiping stain.
2.
Pigmentation: Synthetic pigments.
3.
Finish: Matte.
4.
Product Code: SIK15004.
a.
Color: 004 Natural Oak.
b.
VOC Content: 252.40 g/L.
5.
Product Code: SIK15010.
a.
Color: 010 Walnut.
b.
VOC Content: 250.27 g/L.
6.
Product Code: SIK15023.
a.
Color: 023 Burgundy.
b.
VOC Content: 245.50 g/L.
7.
Product Code: SIK15030.
a.
Color: 030 Opal White.
b.
VOC Content: 243.96 g/L.
8.
Product Code: SIK15044.
a.
Color: 044 Cherry.
b.
VOC Content: 257.41 g/L.
9.
Product Code: SIK15045.
a.
Color: 045 Mahogany.
b.
VOC Content: 259.27 g/L.
10.
Product Code: SIK15061.
a.
Color: 061 Hunter Green.
b.
VOC Content: 247.85 g/L.
11.
Product Code: SIK15072.
a.
Color: 072 Butternut.
b.
VOC Content: 252.42 g/L.
12.
Product Code: SIK15074.
a.
Color: 074 Ipswich Pine.
b.
VOC Content: 246.34 g/L.
13.
Product Code: SIK15078.
a.
Color: 078 Natural.
b.
VOC Content: 250.03 g/L.
09930-3
14.
15.
Product Code: SIK15083.
a.
Color: 083 Fruitwood.
b.
VOC Content: 265.00 g/L.
Product Code: SIK15085.
a.
Color: 085 Teak.
b.
VOC Content: 271.55 g/L.
D.
Coating Type: Log Pretreatment as manufactured by Sikkens Wood Finishes.
1.
Product Code: SIK16003.
2.
Description: Clear, waterborne exterior treatment.
3.
Finish: Flat
4.
VOC Content: Less than 120 g/L.
5.
VOC Content: 412.43 g/L.
E.
Coating Type: Sikkens Cetol SRD as manufactured by Sikkens Wood Finishes.
1.
Description: One-coat, exterior wood stain
2.
Finish: Matte.
3.
Pigmentation: Translucent iron oxide pigments.
4.
Product Code: SIK17005.
a.
VOC Content: 517.48 g/L.
b.
Color: 005 Natural Oak.
5.
Product Code: SIK17009.
a.
VOC Content: 514.68 g/L.
b.
Color: 009 Dark Oak.
6.
Product Code: SIK17045.
a.
VOC Content: 514.20 g/L.
b.
Color: 045 Mahogany.
7.
Product Code: SIK17072.
a.
VOC Content: 511.98 g/L.
b.
Color: 072 Butternut.
8.
Product Code: SIK17077.
a.
VOC Content: 516.33 g/L.
b.
Color: 077 Cedar.
9.
Product Code: SIK17078.
a.
VOC Content: 502.34 g/L.
b.
Color: 078 Natural.
10.
Product Code: SIK17085.
a.
VOC Content: 504.04 g/L.
b.
Color: 085 Teak.
11.
Product Code: SIK17089.
a.
VOC Content: 511.29 g/L.
b.
Color: 089 Redwood.
12.
Product Code: SIK17113.
a.
VOC Content: 503.14 g/L.
b.
Color: 113 Cape Cod Grey.
13.
Product Code: SIK17996.
a.
VOC Content: 514.84 g/L.
b.
Color: 996 Natural Light.
F.
Coating Type: Sikkens Cetol 1 as manufactured by Sikkens Wood Finishes.
1.
Description: Translucent, microporous exterior wood basecoat.
2.
Pigmentation: Translucent iron oxide pigments.
3.
Composition: Alkyd/oil blend.
4.
Finish: Satin sheen.
5.
Product Code: SIK21005.
a.
Color: 005 Natural Oak.
09930-4
6.
7.
8.
9.
10.
11.
12.
13.
G.
b.
VOC Content: 536.74 g/L.
Product Code: SIK21009.
a.
Color: 009 Dark Oak.
b.
VOC Content: 538.89 g/L.
Product Code: SIK21020.
a.
Color: 020 Ebony.
b.
VOC Content: 547.04 g/L.
Product Code: SIK21045.
a.
Color: 045 Mahogany.
b.
VOC Content: 546.01 g/L.
Product Code: SIK21072.
a.
Color: 072 Butternut.
b.
VOC Content: 549.89 g/L.
Product Code: SIK21077.
a.
Color: 077 Cedar.
b.
VOC Content: 541.94 g/L.
Product Code: SIK21078.
a.
Color: 078 Natural.
b.
VOC Content: 538.72 g/L.
Product Code: SIK21085.
a.
Color: 085 Teak.
b.
VOC Content: 542.91 g/L.
Product Code: SIK21996.
a.
Color: 996 Natural Light.
b.
VOC Content: 538.79 g/L.
Coating Type: Sikkens Cetol 23 Plus as manufactured by Sikkens Wood Finishes.
1.
Description: Translucent, microporous exterior wood topcoat.
2.
Pigmentation: Translucent iron oxide pigments.
3.
Composition: Alkyd resin; contains manufacturer's UV absorbent additives.
4.
Finish: Satin sheen.
5.
Product Code: SIK22005.
a.
Color: 005 Natural Oak.
b.
VOC Content: 501.23 g/L.
6.
Product Code: SIK22009.
a.
Color: 009 Dark Oak.
b.
VOC Content: 500.11 g/L.
7.
Product Code: SIK22045.
a.
Color: 045 Mahogany.
b.
VOC Content: 502.54 g/L.
8.
Product Code: SIK22072.
a.
Color: 072 Butternut.
b.
VOC Content: 502.55 g/L.
9.
Product Code: SIK22077.
a.
Color: 077 Cedar.
b.
VOC Content: 501.81 g/L.
10.
Product Code: SIK22078.
a.
Color: 078 Natural.
b.
VOC Content: 501.29 g/L.
11.
Product Code: SIK22085.
a.
Color: 085 Teak.
b.
VOC Content: 497.77 g/L.
12.
Product Code: SIK22996.
a.
Color: 996 Natural Light.
b.
VOC Content: 489.91 g/L.
09930-5
H.
Coating Type: Sikkens Cetol Interior Clear as manufactured by Sikkens Wood Finishes.
1.
Description: Transparent, clear stain designed for interior applications.
2.
Product Code: SIK23003.
3.
Composition: Alkyd resin, oil based.
4.
Color: 003 Colorless.
5.
Finish: Satin sheen.
6.
VOC Content: 540.30 g/L.
I.
Coating Type: Sikkens Cetol Log Decor as manufactured by Sikkens Wood Finishes.
1.
Description: Translucent, waterborne stain for most interior wood surfaces.
2.
Composition: Urethane enhanced.
3.
Pigmentation: Synthetic pigments.
4.
Finish: Satin.
5.
Product Code: SIK31006.
a.
Color: 006 Light Oak.
b.
VOC Content: 383.56 g/L.
6.
Product Code: SIK31030.
a.
Color: 030 Opal White.
b.
VOC Content: 378.94 g/L.
7.
Product Code: SIK31043.
a.
Color: 043 Caramel.
b.
VOC Content: 380.95 g/L.
8.
Product Code: SIK31078.
a.
Color: 078 Natural.
b.
VOC Content: 387.31 g/L.
9.
Product Code: SIK31996.
a.
Color: 996 Natural Light.
b.
VOC Content: 381.29 g/L.
J.
Coating Type: Sikkens Cetol 1RE as manufactured by Sikkens Wood Finishes.
1.
Description: Translucent, microporous exterior wood basecoat.
2.
Pigmentation: Translucent iron oxide pigments.
3.
Composition: Alkyd/oil blend.
4.
Finish: Satin sheen.
5.
Product Code: SIK41005.
a.
Color: 005 Natural Oak.
b.
VOC Content: 340.81 g/L.
6.
Product Code: SIK41009.
a.
Color: 009 Dark Oak.
b.
VOC Content: 343.90 g/L.
7.
Product Code: SIK41045.
a.
Color: 045 Mahogany.
b.
VOC Content: 336.85 g/L.
8.
Product Code: SIK41072.
a.
Color: 072 Butternut.
b.
VOC Content: 339.52 g/L.
9.
Product Code: SIK41077.
a.
Color: 077 Cedar.
b.
VOC Content: 341.98 g/L.
10.
Product Code: SIK41078.
a.
Color: 078 Natural.
b.
VOC Content: 342.72 g/L.
11.
Product Code: SIK41085.
a.
Color: 085 Teak.
b.
VOC Content: 343.24 g/L.
12.
Product Code: SIK41996.
09930-6
a.
b.
Color: 996 Natural Light.
VOC Content: 343.00 g/L.
K.
Coating Type: Sikkens Cetol Log and Siding as manufactured by Sikkens Wood Finishes.
1.
Description: Translucent, microporous finish for exterior surfaces.
2.
Composition: High solids alkyd formulation; contains manufacturer's UV absorbent
additives.
3.
Pigmentation: Translucent iron oxide pigments.
4.
Finish: Satin.
5.
Product Code: SIK42005.
a.
Color: 005 Natural Oak.
b.
VOC Content: 335.63 g/L.
6.
Product Code: SIK42009.
a.
Color: 009 Dark Oak.
b.
VOC Content: 337.82 g/L.
7.
Product Code: SIK42072.
a.
Color: 072 Butternut.
b.
VOC Content: 336.92 g/L.
8.
Product Code: SIK42077.
a.
Color: 077 Cedar.
b.
VOC Content: 338.80 g/L.
9.
Product Code: SIK42078.
a.
Color: 078 Natural.
b.
VOC Content: 330.44 g/L.
10.
Product Code: SIK42085.
a.
Color: 085 Teak.
b.
VOC Content: 337.74 g/L.
11.
Product Code: SIK42111.
a.
Color: 111 Western Grey.
b.
VOC Content: 333.51 g/L.
12.
Product Code: SIK42996.
a.
Color: 996 Natural Light.
b.
VOC Content: 331.93 g/L.
L.
Coating Type: Sikkens Cetol 23 PlusRE as manufactured by Sikkens Wood Finishes.
1.
Description: Translucent, microporous exterior wood topcoat.
2.
Composition: Alkyd resin; contains manufacturer's UV absorbent additives.
3.
Pigmentation: Translucent iron oxide pigments.
4.
Finish: Satin sheen.
5.
Product Code: SIK43005.
a.
Color: 005 Natural Oak.
b.
VOC Content: 346.17 g/L.
6.
Product Code: SIK43009.
a.
Color: 009 Dark Oak.
b.
VOC Content: 348.22 g/L.
7.
Product Code: SIK43045.
a.
Color: 045 Mahogany.
b.
VOC Content: 345.93 g/L.
8.
Product Code: SIK43072.
a.
Color: 072 Butternut.
b.
VOC Content: 346.45 g/L.
9.
Product Code: SIK43077.
a.
Color: 077 Cedar.
b.
VOC Content: 346.51 g/L.
10.
Product Code: SIK43078.
a.
Color: 078 Natural.
09930-7
11.
12.
b.
VOC Content: 350.38 g/L.
Product Code: SIK43085.
a.
Color: 085 Teak.
b.
VOC Content: 346.74 g/L.
Product Code: SIK43996.
a.
Color: 996 Natural Light.
b.
VOC Content: 345.30 g/L.
M.
Coating Type: Sikkens Cetol DEK Finish as manufactured by Sikkens Wood Finishes.
1.
Description: Translucent, microporous finish for exterior decks.
2.
Composition: Alkyd high solids formulation with added silica; contains manufacturer's
UV absorbent additives.
3.
Pigmentation: Translucent iron oxide pigments.
4.
Finish: Satin.
5.
VOC Content: Less than 350 g/L.
6.
Product Code: SIK44005.
a.
Color: 005 Natural Oak.
7.
Product Code: SIK44045.
a.
Color: 045 Mahogany.
8.
Product Code: SIK44077.
a.
Color: 077 Cedar.
9.
Product Code: SIK44078.
a.
Color: 078 Natural.
N.
Coating Type: Sikkens Cetol SRDRE as manufactured by Sikkens Wood Finishes.
1.
Description: One-coat, exterior wood stain
2.
Finish: Matte.
3.
Pigmentation: Translucent iron oxide pigments.
4.
Product Code: SIK47005.
a.
Color: 005 Natural Oak.
b.
VOC Content: 343.33 g/L.
5.
Product Code: SIK47009.
a.
Color: 009 Dark Oak.
b.
VOC Content: 346.58 g/L.
6.
Product Code: SIK47045.
a.
Color: 045 Mahogany.
b.
VOC Content: 334.55 g/L.
7.
Product Code: SIK47072.
a.
Color: 072 Butternut.
b.
VOC Content: 343.72 g/L.
8.
Product Code: SIK47077.
a.
Color: 077 Cedar.
b.
VOC Content: 337.68 g/L.
9.
Product Code: SIK47078.
a.
Color: 078 Natural.
b.
VOC Content: 339.85 g/L.
10.
Product Code: SIK47085.
a.
Color: 085 Teak
b.
VOC Content: 343.60 g/L.
11.
Product Code: SIK47089.
a.
Color: 089 Redwood.
b.
VOC Content: 339.74 g/L.
12.
Product Code: SIK47113.
a.
Color: 113 Cape Cod Grey.
b.
VOC Content: 338.32 g/L.
13.
Product Code: SIK47996.
09930-8
a.
b.
Color: 996 Natural Light.
VOC Content: 343.06 g/L.
O.
Coating Type: Sikkens Cetol Door and Window as manufactured by Sikkens Wood Finishes.
1.
Description: Microporous exterior finish for windows and doors.
2.
Composition: Alkyd high solids formulation.
3.
Product Code: SIK48003.
a.
Color: 003 Colorless.
b.
VOC Content: 336.93 g/L.
c.
Finish: Satin.
4.
Product Code: SIK48006.
a.
Color: 006 Light Oak.
b.
VOC Content: 348.15 g/L.
c.
Finish: Satin.
5.
Product Code: SIK48009.
a.
Color: 009 Dark Oak.
b.
VOC Content: 347.59 g/L.
c.
Finish: Satin.
6.
Product Code: SIK48045.
a.
Color: 045 Mahogany.
b.
VOC Content: 345.73 g/L.
c.
Finish: Satin.
7.
Product Code: SIK48078.
a.
Color: 078 Natural.
b.
VOC Content: 346.79 g/L.
c.
Finish: Satin.
8.
Product Code: SIK49003.
a.
Color: 003 Colorless.
b.
VOC Content: 343.31 g/L.
c.
Finish: Gloss.
9.
Product Code: SIK49006.
a.
Color: 006 Light Oak.
b.
VOC Content: Less than 350 g/L.
c.
Finish: Gloss.
10.
Product Code: SIK49009.
a.
Color: 009 Dark Oak.
b.
VOC Content: Less than 350 g/L.
c.
Finish: Gloss.
11.
Product Code: SIK49045.
a.
Color: 045 Mahogany.
b.
VOC Content: Less than 350 g/L.
c.
Finish: Gloss.
12.
Product Code: SIK49078.
a.
Color: 078 Natural.
b.
VOC Content: Less than 350 g/L.
c.
Finish: Gloss.
P.
Coating Type: Sikkens Cetol BL Interior Clear as manufactured by Sikkens Wood Finishes.
1.
Description: Transparent, clear waterborne stain designed for interior applications.
2.
Composition: Urethane-fortified acrylic formulation.
3.
Product Code: SIK19003.
a.
Finish: Low luster.
b.
VOC Content: 308.42 g/L.
4.
Product Code: SIK29003.
a.
Finish: Satin sheen.
b.
VOC Content: 295.29 g/L.
09930-9
5.
Product Code: SIK39003.
a.
Finish: Gloss.
b.
VOC Content: 281.93 g/L.
Q.
Coating Type: Sikkens Rubbol Solid DEK as manufactured by Sikkens Wood Finishes.
1.
Description: Solid hide exterior wood coating for decks.
2.
Composition: Acrylic/oil formula.
3.
Finish: Low luster.
4.
VOC Content: Less than 250 g/L.
5.
Tint Base:
a.
Product Code: SIK55100.
1)
Type: 100 White.
b.
Product Code: SIK55110.
1)
Type: 110 Light Tint Base.
c.
Product Code: SIK55120.
1)
Type: 120 Medium Tint Base.
d.
Product Code: SIK55140.
1)
Type: 140 Ultra Deep Tint Base.
6.
Product Code: SIK55___.
a.
Color: __________.
7.
Product Code: SIK55052.
a.
Color: 052 Navajo Red.
8.
Product Code: SIK55058.
a.
Color: 058 Oxford Brown.
9.
Product Code: SIK55201.
a.
Color: 201 Chocolate Brown.
10.
Product Code: SIK55414.
a.
Color: 414 Forest Green.
R.
Coating Type: Sikkens Rubbol Siding as manufactured by Sikkens Wood Finishes.
1.
Description: Protective coating.
2.
Composition: Hybrid alkyd/acrylic formula.
3.
Finish: Gloss.
4.
VOC Content: Less than 200 g/L.
5.
Tint Base:
a.
Product Code: SIK56100.
1)
Color: 100 White.
b.
Product Code: SIK56110.
1)
Color: 110 Light Tint Base.
c.
Product Code: SIK56120.
1)
Color: 120 Medium Tint Base.
d.
Product Code: SIK56140.
1)
Type: 140 Ultra Deep Tint Base.
6.
Product Code: SIK56___.
a.
Color: __________.
7.
Product Code: SIK56052.
a.
Color: 052 Navajo Red.
8.
Product Code: SIK56058.
a.
Color: 058 Oxford Brown.
9.
Product Code: SIK56201.
a.
Color: 201 Chocolate Brown.
10.
Product Code: SIK56414.
a.
Color: 414 Forest Green.
S.
Coating Type: Sikkens Rubbol DEK as manufactured by Sikkens Wood Finishes.
1.
Description: Solid hide exterior wood coating for decks.
09930-10
2.
3.
4.
5.
6.
7.
8.
9.
Composition: Acrylic/oil formula.
Finish: Low luster.
Tint Base:
a.
Product Code: SIK58100.
1)
Color: 100 White.
2)
VOC Content: 426.03 g/L.
b.
Product Code: SIK58110.
1)
Color: 110 Rubdek Light Base.
2)
VOC Content: 219.05 g/L.
c.
Product Code: SIK58120.
1)
Color: 120 Rubdek Medium Base.
2)
VOC Content: 232.88 g/L.
d.
Product Code: SIK58130.
1)
Color: 130 Rubdek Deep Base.
2)
VOC Content: 229.89 g/L.
Product Code: SIK56___.
a.
Color: __________.
Product Code: SIK58052.
a.
Color: 052 Navajo Red.
b.
VOC Content: 338.88 g/L.
Product Code: SIK58058.
a.
Color: 058 Oxford Brown.
b.
VOC Content: 339.53 g/L.
Product Code: SIK58201.
a.
Color: 201 Chocolate Brown.
b.
VOC Content: 339.40 g/L.
Product Code: SIK58414.
a.
Color: 414 Forest Green.
b.
VOC Content: 339.88 g/L.
T.
Coating Type: Sikkens Cetol MaintenanceRE as manufactured by Sikkens Wood Finishes.
1.
Description: One coat, non-pigmented exterior finish.
2.
Product Code: SIK61003.
3.
Composition: High solids alkyd formulation.
4.
Finish: Satin.
5.
VOC Content: 329.79 g/L.
U.
Coating Type: Sikkens Cetol Maintenance as manufactured by Sikkens Wood Finishes.
1.
Description: One coat, non-pigmented exterior finish.
2.
Product Code: SIK62003.
3.
Composition: High solids alkyd formulation.
4.
Finish: Satin.
5.
VOC Content: 449.75 g/L.
V.
Coating Type: Sikkens Cetol SRD Semi-Transparent Stain as manufactured by Sikkens
Wood Finishes.
1.
Tint Base Product Code: SIK67190.
2.
Description: One-coat, exterior wood stain.
3.
Composition: Alkyd/oil formulation; contains manufacturer's UV absorbent additives.
4.
Pigmentation: Translucent iron oxide pigments.
5.
VOC Content: Less than 250 g/L.
6.
Product Code: SIK67005.
a.
Color: 005 Natural Oak.
7.
Product Code: SIK67009.
a.
Color: 009 Dark Oak.
8.
Product Code: SIK67045.
09930-11
9.
10.
11.
12.
13.
W.
2.3
a.
Color: 045 Mahogany.
Product Code: SIK67072.
a.
Color: 072 Butternut.
Product Code: SIK67077.
a.
Color: 077 Cedar.
Product Code: SIK67078.
a.
Color: 078 Natural.
Product Code: SIK67085.
a.
Color: 085 Teak.
Product Code: SIK67089.
a.
Color: 089 Redwood.
Coating Type: Sikkens Cetol Waterborne SRD Translucent Base with Sikkens Cetol
Waterborne SRD Pigments as manufactured by Sikkens Wood Finishes.
1.
Description: One-coat, exterior wood stain.
2.
Composition: Alkyd/Oil formula; contains manufacturer's UV absorbent additives.
3.
Pigmentation: Translucent iron oxide pigments.
4.
Tint Base Product Code: SIK77000.
a.
VOC Content: Less than 120.76 g/L.
5.
Product Code: SIK77005.
a.
Color: 005 Natural Oak.
b.
VOC Content: 391.60 g/L.
6.
Product Code: SIK77009.
a.
Color: 009 Dark Oak.
b.
VOC Content: 381.24 g/L.
7.
Product Code: SIK77045.
a.
Color: 045 Mahogany.
b.
VOC Content: 361.34 g/L.
8.
Product Code: SIK77072.
a.
Color: 072 Butternut.
b.
VOC Content: 381.39 g/L.
9.
Product Code: SIK77077.
a.
Color: 077 Cedar.
b.
VOC Content: 401.12 g/L.
10.
Product Code: SIK77078.
a.
Color: 078 Natural.
b.
VOC Content: 385.37 g/L.
11.
Product Code: SIK77085.
a.
Color: 085 Teak.
b.
VOC Content: 390.41 g/L.
12.
Product Code: SIK77089.
a.
Color: 089 Redwood.
b.
VOC Content: 396.82 g/L.
COATING APPLICATION AND SCHEDULE
A.
Application: Deck coating systems.
1.
Level of Transparency: Translucent coatings.
a.
System: Sikkens Cetol SRD 250.
1)
Number of Coats: _____.
b.
System: Single coating of Sikkens Cetol SRD.
c.
System: Single coating of Sikkens Cetol SRDRE.
d.
System: Single coating of Sikkens Cetol Waterborne SRD Translucent Base
with Sikkens Cetol Waterborne SRD Pigments.
e.
System: Sikkens Cetol DEK Finish.
1)
Number of Coats: _____.
09930-12
2.
3.
Level of Transparency: Semi-transparent coatings.
a.
System: Single coating of Sikkens Cetol SRD Semi-Transparent Stain
Level of Transparency: Solid hide coatings.
a.
System: Sikkens Rubbol Solid DEK.
1)
Number of Coats: _____.
b.
System: Sikkens Rubbol DEK.
1)
Number of Coats: _____.
B.
Application: Exterior coating systems.
1.
Level of Transparency: Translucent coatings.
a.
System: Sikkens Cetol SRD 250.
1)
Number of Coats: _____.
b.
System: Single coating of Sikkens Cetol SRD.
c.
System: Single coating of Sikkens Cetol SRDRE.
d.
System: Single coating of Sikkens Cetol Waterborne SRD Translucent Base
with Sikkens Cetol Waterborne SRD Pigments.
e.
System: Sikkens Cetol Log and Siding.
1)
Number of Coats: _____.
f.
System: Sikkens Cetol 1/Cetol 23.
1)
Basecoat: Sikkens Cetol 1.
2)
Intermediate Coating: Sikkens Cetol 1.
3)
Intermediate Coating: Sikkens Cetol 23.
4)
Topcoat: Sikkens Cetol 23.
g.
System: Sikkens Cetol 1RE/Cetol 23RE
1)
Basecoat: Sikkens Cetol 1RE.
2)
Intermediate Coating: Sikkens Cetol 1RE.
3)
Intermediate Coating: Sikkens Cetol 23RE.
4)
Topcoat: Sikkens Cetol 23RE.
h.
System: Sikkens Cetol Door and Window.
1)
Number of Coats: _____.
2.
Level of Transparency: Semi-transparent coatings.
a.
System: Single coating of Sikkens Cetol SRD Semi-Transparent Stain
3.
Solid Hide Finish Exterior Coatings:
a.
System: Sikkens Rubbol Siding.
1)
Number of Coats: _____.
C.
Application: Coating systems for interior wood surfaces.
1.
Level of Transparency: Clear coatings.
a.
System: Sikkens Cetol Interior Clear
1)
Number of Coats: _____.
b.
System: Sikkens Cetol BL Interior Clear.
1)
Number of Coats: _____.
c.
System: Sikkens Cetol UV Interior.
1)
Number of Coats: _____.
2.
Level of Transparency: Translucent coatings.
a.
System: Sikkens Cetol Interior WB Stain
1)
Number of Coats: _____.
b.
System: Sikkens Cetol Log Decor
1)
Number of Coats: _____.
D.
Application: Coating systems designed for log homes.
1.
Primer: Log Pretreatment.
2.
Level of Transparency: Clear coatings.
a.
System: Sikkens Cetol Interior Clear.
1)
Number of Coats: _____.
3.
Level of Transparency: Translucent coatings.
09930-13
a.
4.
E.
System: Sikkens Cetol SRD 250.
1)
Number of Coats: _____.
b.
System: Single coating of Sikkens Cetol SRD.
c.
System: Single coating of Sikkens Cetol SRDRE.
d.
System: Single coating of Sikkens Cetol Waterborne SRD Translucent Base
with Sikkens Cetol Waterborne SRD Pigments.
e.
System: Sikkens Cetol Log and Siding.
1)
Number of Coats: _____.
f.
System: Sikkens Cetol 1/Cetol 23.
1)
Basecoat: Sikkens Cetol 1.
2)
Intermediate Coating: Sikkens Cetol 1.
3)
Intermediate Coating: Sikkens Cetol 23.
4)
Topcoat: Sikkens Cetol 23.
g.
System: Sikkens Cetol 1RE/Cetol 23RE.
1)
Basecoat: Sikkens Cetol 1RE.
2)
Intermediate Coating: Sikkens Cetol 1RE.
3)
Intermediate Coating: Sikkens Cetol 23RE.
4)
Topcoat: Sikkens Cetol 23RE.
h.
System: Sikkens Cetol Door and Window.
1)
Number of Coats: _____.
i.
System: Sikkens Cetol Log Decor.
1)
Number of Coats: _____.
Level of Transparency: Semi-transparent coatings.
a.
System: Single coating of Sikkens Cetol SRD Semi-Transparent Stain.
Application: Coating systems for interior wood surfaces.
1.
System: Single Coat of Sikkens Cetol Maintenance.
2.
System: Single Coat of Sikkens Cetol MaintenanceRE.
PART 3 EXECUTION
3.1
3.2
PREPARATION
A.
Prepare surfaces using the methods recommended by the manufacturer for achieving the
best result for the substrate under the project conditions. If preparation is the responsibility of
another installer, notify Architect in writing of deviations from manufacturer's recommended
installation tolerances and conditions.
B.
Do not proceed with installation until substrates have been properly prepared and deviations
from manufacturer's recommended tolerances are corrected. Commencement of installation
constitutes acceptance of conditions.
INSTALLATION
A.
3.3
Install in accordance with manufacturer's written instructions and recommendations,
including the following:
1.
Test moisture content of wood substrates to confirm it is within manufacturer's
recommended limits for the coating type required.
2.
Remove hardware and similar items to allow continuous coverage to the greatest
extent practical.
3.
Clean substrate of dirt, dust and other debris. Remove temporary markings and
labels.
4.
Countersink nails if raised above the surface to be coated, fill holes.
5.
Apply to achieve uniform appearance, free of lap marks, bush marks, and other
imperfections.
PROTECTION
09930-14
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION
09930-15