MAP
Ch 3, 5, and 8 quiz
__________ 1. Solid materials are often called engineering materials because they?
A. conform to the shape of their container
B. can be used over a wide range of temperatures
C. will hold their shapes without outside support
D. are usually inexpensive to process
__________ 2. Which of the following is a natural polymer?
A. Vinyl chloride.
B. Propylene.
C. Acrylic.
D. Latex.
__________ 3. A thin layer of wood used to manufacture plywood is?
A. Vinyl chloride.
B. Veneer
C. Onorganic Materials
D. Organic Materials
__________ 4. Materials that can be traced back to once-living things are?
A. Vinyl chloride.
B. Veneer
C. Inorganic Materials
D. Organic Materials
__________ 5. Nonliving ores and earth elements are classified as?
A. Vinyl chloride.
B. Veneer
C. Inorganic Materials
D. Organic Materials
___________6. The traits or qualities that are specific to a certain material are called?
A. Properties
B. Density
C. Physical Properties
D. Tensile Strength
E. Porosity
___________7. The characteristics that describe the size, density, or surface texture of a product are?
A. Properties
B. Density
C. Physical Properties
D. Tensile Strength
E. Porosity
__________ 8. The ability of a material to absorb air or water.
A. Properties
B. Density
C. Physical Properties
D. Tensile Strength
E. Porosity
__________9. What is a measure of how well a material will\resist forces from pulling the material apart?
A. Properties
B. Density
C. Physical Properties
D. Tensile Strength
E. Porosity
__________10. A measure of the mass of a material is called?
A. Properties
B. Density
C. Physical Properties
D. Tensile Strength
E. Porosity
__________11. The first step in in transforming raw materials into products is defined as?
A. Secondary Processing
B. Primary Processing
C. Standard Stock
D. Forest Products
__________12. All products made from wood are termed?
A. Wood
B. Lumber
C. Forest Products
D. Composites
__________13. Pieces of wood that have been made to a certain size for construction or other uses is?
A. Wood
B. Lumber
C. Forest Products
D. Composites
__________14. A synthetic wood composite made from sheets of veneer is referred to as?
A. Particleboard
B. Plywood
C. Fiberboard
D. Veneer
__________15. A synthetic wood composite made from chips, shavings, or flakes held together with synthetic glue is?
A. Particleboard
B. Plywood
C. Fiberboard
D. Veneer
__________16. A synthetic wood composite made from wood fibers held together with natural glue is?
A. Particleboard
B. Plywood
C. Fiberboard
D. Veneer
__________17. A thin sheet of wood that is cut from a log is called?
A. Particleboard
B. Plywood
C. Fiberboard
D. Veneer
__________18. A material that is made from mill waste and chips that is broken down into fibers, formed into mats, and
is pressurized under a heated press without glue using the materials natural lignin is called?
A. Hardboard
B. Lumber
C. Forest Products
D. Composites
__________19. Most plywood is made from what 2 lumber species?
A. Fir and Maple
B. Oak and Pine
C. Pine and Maple
D. Pine and Fir
__________20. Lumber that is cut and milled into a standard width and length is referred to as?
A. Cabinet Grade
B. Dimensional Grade
C. Grade A
D. Grade B