PROCEEDINGS OF THE ________ NATIONAL HEAT AND MASS TRANSFER CONFERENCE,
DECEMBER, 1997
S.N.
Paper No.
Title
INVITED LECTURES
Author
Page No.
1.
HMT-97-001
Impact of energy separation on heat transfer
W.S. Seol and
R.J.Goldstein
1
2.
HMT-97-002
Heat pipes and closed two-phase thermosyphons
for rational use of energy and efficient cooling and
heating technologies
Manfred Groll
13
3.
HMT-97-003
Augmentation of heat transfer using vortex
generators
Kahoru Torii and
JurandirI. Yanagihara
29
4.
HMT-97-004
Some problems of transport phenomena in the
combustion of fuel sprays
R. Natarajan
45
5.
HMT-97-005
Heat transfer in thermal plasmas
N. Venkatramani
57
6.
HMT-97-006
Heat and mass transfer in metal hydride reactors:
influence on design and performance of heating
and cooling systems
S. Srinivasa Murthy and
M. Ram Gopal
73
7.
HMT-97-007
Thermal conditioning and stratification in
cryogenic propellant rocket system
K. Ramamurthi
85
8.
HMT-97-008
Application of computerized tomography for
measurements in heat and mass transfer
P. Munshi
97
9.
HMT-97-009
Thermal hydraulic problems of sodium cooled fast
reactors
G. Vaidyanathan
107
10.
HMT-97-010
Enhanced boiling heat transfer using passive
augmentation techniques
A.R. Balakrishnan and
S. Madhusudana Rao
121
11.
HMT-97-011
Role and characterisation of double-diffusive
convection during solidification of binary alloys
B. Basu and A.K. Singh
129
12.
HMT-97-012
Results of some recent studies on pool nucleate
and film boiling
V.K. Dhir
143
13.
HMT-97-013
Advances in solution methods for effectivenessNTU relationships for heat exchanger complex flow
arrangements
D.P. Sekulic and R.K.Shah
159
14.
HMT-97-014
Heat and mass transfer in czochralski crystal
growth systems
H. Zhang and V. Prasad
175
15.
HMT-97-015
Heat transfer in film cooled turbine blades
Vijay K. Garg
185
16.
HMT-97-016
Stability and rupture of thin liquid film
S.G. Bankoff and
201
1
Alexander Oran
17.
HMT-97-017
Bone-cell growth in microgravity-cell biology, fluid
mechanics and mass transfer
P.S. Ayyaswamy
211
18.
HMT-97-018
Large eddy simulation of complex flows with heat
transfer
N.K. Mitra
219
19.
HMT-97-019
On the role of finite elements in heat and mass
transfer
K.N. Seetharamu
233
20.
HMT-97-020
Industrial vaporisers and recent research
Vishwas V. Wadekar
247
Conduction, Solidification amd Melting
263-306
21.
HMT-97-021
Calculation and control of contact conductivity in
construction elements of spacecraft and power
systems
Yu. S. Mesnyankin
263
22.
HMT-97-022
Thermal boundary effects for laminated composite
solids
S S. Sadhal
269
23.
HMT-97-023
Thermal stress simulation for space reinforced
composite structures
V.V. Vorobey
275
24.
HMT-97-024
Capillary porous structures as a specific form of a
volume sublimation in solid refrigerants
Andrey V. Rozhentsev
279
25.
HMT-97-025
A peculiarity of effective thermal conduction in
solid capillary porous refrigerants
Andrey V. Rozhentsev
and Michael V. Rybnikov
285
26.
HMT-97-026
Analysis of microwave thawing with the effective
heat capacity method
Tanmay Basak and
K.G.Ayappa
289
27.
HMT-97-027
Interface positions and heat flux distributions in
steady, two-dimensional, pure water-ice systems
Elanine Bohr, Nabil
Elkouh and B. Rabi Baliga
295
28.
HMT-97-028
Modeling and simulation of human thermal activity
S.C. Boregowda,
S.N.Tiwari and
S.K.Chaturvedi
301
Forced Convection Heat and Mass Transfer
307-462
29.
HMT-97-029
Analysis of some theoretical methods developed
for comparison of thermohydraulic effectiveness
of heat transfer surfaces
G.A. Dreitser, B.V.
Dzyubenko and R.I.
Yankimenko
307
30.
HMT-97-030
Heat transfer and pressure drop characteristics of
laminar flow through a circular tube fitted with
regularly spaced twisted tape elements with
multiple twists
S.K. Saha and D.
Chakraborty
313
31.
HMT-97-031
Performance evaluation of full length and half
length twisted tape inserts on laminar flow heat
transfer in tubes
M.S. Lokanath
319
2
32.
HMT-97-032
Experimental investigation heat transfer
characteristics of a round jet impinging on a flat
plate at constant heat flux condition
S.K. Biswas, P. Manna
and R.K. Brahma
325
33.
HMT-97-033
Heat transfer and fluid flow characteristics of
rectangular ducts with inclined chamfered ribroughness on one broad heated wall
Rajendra Karwa,
S.C.Solanki and J.S. Saini
331
34.
HMT-97-034
Physical model of streamline and heat transfer in
transversely finned tubes
Ye. N. Pismenny
337
35.
HMT-97-035
Gas-phase controlled absorption for
countercurrently flowing gas and liquid between
two rotating disks
P. Sandilya, G. Biswas
and A. Sharma
341
36.
HMT-97-036
Local heat transfer distribution in a rotating
square channel with a sharp 180 DEG bend
S.V. Prabhu and R.P.
Vedula
347
37.
HMT-97-037
Effect of drop diameter on mass transfer in liquidliquid systems
M.M. Anwar, S. Anwar
and D.W. Pritchard
353
38.
HMT-97-038
Hydrothermal growth due to double diffusive
convection in composite materials
M. Venkatachalappa,
Prasad, I.S. Shivakumara
and R. Sumithra
357
39.
HMT-97-039
Two-dimensional numerical study of developing
flow and heat transfer in wavy passages
K.M. Stone and S.P.
Vanka
363
40.
HMT-97-040
On the benard-poiseuille problem for Newtonian
and slightly non-newtonian fluids-a numerical
study
John T. Albers and V.
Dakshina Murty
369
41.
HMT-97-041
Liquid-liquid two phase layered thermocapillary
flow of non-newtonian fluids
Dennis A. Siginer, Li
Yunling and
ThomasE.Jacks
375
42.
HMT-97-042
An experimental study for estimating heat transfer
coefficient from coiled tube surfaces in cross-flow
of air
Rahul Salhotra,
S.K.Gupta and
P.M.V.Subbarao
381
43.
HMT-97-043
Mathematical model for predicting the horizontal
dispersion of thermal discharge in a water body
L.D. Papney and S.K.
Gupta
387
44.
HMT-97-044
Experimental study on enhancement of heat
transfer due to the longitudinal vortices in a
channel
K. Torii, P.M.V. Subbarao
and G. Biswas
395
45.
HMT-97-045
Heat transfer in the flow of a viscoelastic fluid over
a stretching surface
S. Bhattacharyya, A. Pal
and A.S. Gupta
401
46.
HMT-97-046
Unsteady convective heat transfer during
displacement of liquid from a vessel by hot gas
G.A. Dreitser, V.V.Volkov,
A.S. Myakochin and
A.S.Neverov
407
3
47.
HMT-97-047
Turbulent heat transfer processes in idealized
czochralski crystal growth configurations
C. Wagner and
R.Friedrich
415
48.
HMT-97-048
Turbulent fluid flow modeling to predict the heat
transfer in the plasma furnace
M.R.R.I. Shamsi
421
49.
HMT-97-049
Turbulent heat transfer and fluid flow in
orthogonally rotating channels
Sandip Dutta
427
50.
HMT-97-050
Effect of an external flow on heat transfer in
turbulent rayleigh-benard convection
S. Ananda Theerthan and
J.H. Arakeri
433
51.
HMT-97-051
Numerical analysis of temperature fluctuations
damping in a two-dimensional cavity
Arlindo de Matos and
Aristeu Silveira-Neto
439
52.
HMT-97-052
A numerical study of turbulent fluid flow and heat
transfer in a channel with discrete heated modules
P. Deb, B. Basu and
P.Majumdar
445
53.
HMT-97-053
Numerical study of flow and heat transfer over an
array of heated blocks
A.K. Saha and P.K. Maji
451
54.
HMT-97-054
Transient heat transfer from protruding electronic
modules on a vertical board during orthogonal
mixed convection
Muhammad M. Rahman
and Jagannath Raghavan
457
Natural Convection
463-512
55.
HMT-97-055
Influence of variable density on natural convection
in gas-filled rectangular porous enclosure
V.V. Satyamurty and
R.V.Sharma
463
56.
HMT-97-056
Combined free and forced convection heat
transfer to water in the entrance region of a
horizontal annulus
Nazurl Islam, U.N.
Gaitonde and
G.K.Sharma
469
57.
HMT-97-057
Experimental study of Rayleigh-benard convection
in square cavity at intermediate Rayleigh numbers
Debasish Mishra,
K.Muralidhar and
P.Munshi
475
58.
HMT-97-058
Free convection in a vertical parallel-plate channel
for nouniform inlet velocity
T.K. Bhattacharyya
481
59.
HMT-97-059
Theoretical study of hydromagnetic free
convection flow from a vertical surface to an
isothermal porous medium with viscous heating,
Brinkman friction and inertial drag
O.A. Beg, H.S. Takhar and
M.A. Hossain
487
60.
HMT-97-060
Buoyancy-driven convection in vertical concentric
cylindrical annulus
M. Venkatachalappa
493
61.
HMT-97-061
Laminar free convection in a horizontal cavity
containing air and a condensable vapour
P.K. De J. Srinivasan and
J.H. Arakeri
499
62.
HMT-97-062
Free convective mass transfer from vertical short
cylinders to non-newtonian fluids
R.P. Chhabra
507
4
Radiative Heat Transfer
513-540
63.
HMT-97-063
Monte carlo prediction of radiative heat transfer in
absorbing-emitting-scattering isothermal media in
one-and two-dimensional Cartesian enclosures
Subash Chandra Mishra
and Manohar Prasad
64.
HMT-97-064
Thermal design and analysis of payload deck of
iIRS-P3 jets
K.V. Shantharam and
S.G. Barve
517
65.
HMT-97-065
Radiation, heat and mass transfer in chemically
reactive jets
K.B. Galitseisky
523
66.
HMT-97-066
A numerical study of radiative heat transfer in a
rapid thermal processing chamber
Pradip Dutta and John C.
Chai
529
67.
HMT-97-067
Three dimensional thermal radiation heat transfer
analysis of a vaccum chamber for material
processing
K.K. Mishra, V. Bhasin,
L.M. Gantayet, and H.S.
Kushwaha
535
Boiling, Condensation and Multi-Phase Flows
513
541-654
68.
HMT-97-068
Experimental study of boiling incipience in a closed
loop thermosiphon
Mohd. Kamil and S.S.
Alam
541
69.
HMT-97-069
Pool boiling heat transfer over interference plates
S. Pal, S. Madhusudana
Rao and A.R.
Balakrishnan
549
70.
HMT-97-070
Analytical model of critical boiling heat flux from a
vertical heating tube inserted in porous media
Hailong Mo, Tongze Ma
and Zhengfang Zhang
555
71.
HMT-97-071
Prediction of heat transfer coefficient for nucleate
pool boiling of mixtures on finned tubes
Abdul-Ameer S. Kadhum,
M.A. Aboukheshem and
B.S. Varshney
561
72.
HMT-97-072
Experimental study of the heat transfer
enhancement during vapour condensation from
vapour-air mixtures on vertical tubes
G.A. Dreitser and S.G.
Zakirov
567
73.
HMT-97-073
Experimental augumentation of nucleate pool
boiling heat transfer coefficient
Sattar Husain
573
74.
HMT-97-074
Study of underside condensation of liquid metal on
a partially wettable substrate
J. Mukherjee, K.K.
mishra, P. Anupama, N.
Maiti, L.M. Gantayet and
S.V.G. Menon
579
75.
HMT-97-075
A general correlation for heat transfer during film
boiling in vertical tubes
M. Mohammed Shah and
M. Altamush Siddiqui
585
76.
HMT-97-076
Experimental hydrodynamics research of singlephase flow and mathematical model of boiling of
cryogenic liquid in a channel with twisted-tape
insert
Mikhail K. Antipin, Olga
B. Karpova, Stanislav E.
Tarasevich and Anatoly
B. Yakovlev
591
5
77.
HMT-97-077
Experimental studies of hydrodynamics and heat
exchange in channels with high-porous cellular
materials in forced convection of single-phase and
boiling working fluids
Yu. F. Gortyshov, I.A.
Popov and K.E. Gulitsky
597
78.
HMT-97-078
Heat transfer specific nature at nitrogen film
boiling in vertical tube in conditions of large liquid
subcool
G.A. Dreitser, I.V.
Antukhov and V.P. Firsov
603
79.
HMT-97-079
Electrohydrodynamic enhancement of heat
transport capacity of a micro heat pipe
W.W. Bhagat, W.P. King
and K.P. Hallinam
609
80.
HMT-97-080
Bubble distributions in two-phase flows
S. Neti,O.E.E.
Mohammed and E. Graf
615
81.
HMT-97-081
Modeling of geysering instabilities during startup
in two heated parallel channels
J.C. Paniagua, U.S.
Rohatgi and V. Prasad
623
82.
HMT-97-082
Thermodynamic modeling of non-equilibrium
processes in porous materials
Eugeniusz Kalinowski and
Andrzej Bucewicz
631
83.
HMT-97-083
A new approach for bubbly flow to slug flow
transition for vertical upward two-phase flow in
pipes
P.K. Vijayan, D.S.
Pilkhwal, D. Saha, R.K.
Sinha and V. Venkat Raj
637
84.
HMT-97-084
Computation of multiphase flows
S. Banerjee, F. Beux, V.
De Angelis and Y. Pan
643
Numerical Modeling Heat and Mass Transfer
655-746
85.
HMT-97-085
Thermo-mechanical modeling of high pressure
liquid-encapsulated Czochralski Crystal Growth
system
H. Zhang and V. Prasad
655
86.
HMT-97-086
Natural convective heat and mass transfer in fluid
saturated anisotropic porous medium
P. Nithiarasu, K.N.
Seetharamu and T.
Sundararajan
661
87.
HMT-97-087
Heat transfer characteristics of a heated laminar
offset slot jet
R.C. Arora and K.A.
Hossain
667
88.
HMT-97-088
Numerical prediction of laminar and turbulent flow
through 90° bend ducts of square and circular
cross sections using non-staggered non-orthogonal
grid
S. Ray and A.W. Date
673
89.
HMT-97-089
Thermostructural analysis of a solid rocket motor
nozzle throat insert using finite element method
R.C. Mehta, K. Suresh
and R. Narayana Iyer
679
90.
HMT-97-090
Numerical estimation of three-dimensional
temperature distribution for laser heat treatment
of finite size work pieces
B.V.S.S.S. Prasad, Jaydev
rana and P.K. Mishra
685
6
91.
HMT-97-091
Numerical investigation of heat transfer and
control of vortex shedding in the wake of a circular
cylinder
K. Veerabathra Swamy,
G. Biswas and K.
Venkatraman
691
92.
HMT-97-092
A numerical study of natural convection in a
porous square cavity with sinusoidal surface
undulations
B.V. rathish Kumar,
P.V.S.N. murthy and P.
Singh
697
93.
HMT-97-093
A numerical simulation of buoyancy driven melt
flow in a czochralski crystal puller subject to
constant wall heat flux
A.Roy, S. Roy and R.C.
Arora
703
94.
HMT-97-094
The ocv method for incompressible fluid flow
calculation on non-staggered grids
Atul Kumar Verma and V.
Eswaran
711
95.
HMT-97-095
Numerical simulation of turbulent flow and
impingement heat transfer for an inclined jet in a
duct with crossflow
P.W. Li, K. Inaoka, K.
Muralidhar and K. Suzuki
715
96.
HMT-97-096
Finite element thermal analysis of steel ingots
M.Prasad and S.K.
Mazumdar
721
97.
HMT-97-097
A time-dependent calculation procedure for flow
and heat transfer in a periodic array of louvered
fins
D.K. tafi and L.W. Zhang
729
98.
HMT-97-098
Numerical investigation of flow and heat transfer
in a finned oval tube
Y. Chen, M. Fiebig and
N.K. Mitra
735
99.
HMT-97-099
A comparison between a numerical scheme using
asymptotic developments and the “fluent code”
for different results on unsteady heat transfer in
pipes
R. Creff, J. Batina, J.
Tourreuil and Y. Lecointe
741
Instrumentation and Measurement Techniques
747-764
100.
HMT-97-100
Reconstruction of the temperature field in
Rayleigh-benard convection in a cylindrical cavity
using interferometry
S.K. Bhadra, G. Biswas
and K. Muralidhar
747
101.
HMT-97-101
Filtering of measurements of non-ststionary
yemperatures of media
L.N. Alexandrovskaya,
E.N. Nikiporets and V.V.
Smirnov
753
102.
HMT-97-102
Heat transfer at the trip of a cylindrical fiber-optic
probe for measuring temperature oscillations in
gas flows
Nirajan K. Talukder
757
103.
HMT-97-103
An experimental method to determine the
interfacial velocity in the core-annular flow in a
tube
Sayavur I. Bakhtiyarov
and Dennis A. Siginer
761
7
Heat and Mass Transfer Equipment
765-872
104.
HMT-97-104
Evolutionary synthesis of heat exchanger networks
Rakesh K.C. Mehta and
Shankar Narasimhan
765
105.
HMT-97-105
Performance evaluation of a plate heat exchanger
and an augmented shell and tube heat exchanger
J.P.R. Moses, R.D. Misal
and M.S. Lokanath
771
106.
HMT-97-106
Performance of heat exchangers with
multicomponent zeotropic mixtures undergoing
phase change
G. Venkatarathnam and
S. Srinivasa Murthy
777
107.
HMT-97-107
An experimental investigation of fouling of heat
exchangers on a crude oil preheat train
P.R. Wheeldon and G.S.
Virdee
787
108.
HMT-97-108
Numerical study of heat transfer and pressure loss
in cross-corrugated plate heat exchangers
Mir-Akbar Hessami
795
109.
HMT-97-109
Steady state performance analysis of once-through
type steam generators
Joe Mohan, R.B. Grover
and V.H. Arakeri
803
110.
HMT-97-110
Simulation of tube annealing furnace
A.K. Singh, B. Basu, N.
Ramachandran, M.K.
Farook and A. Bharani
Kumar
809
111.
HMT-97-111
Navier-stokes analysis with different turbulence
models for film-cooled turbine cascades
S. Sarkar
815
112.
HMT-97-112
A choice algorithm of an optimal cooling system of
gas turbine blades
B.M. Galitseisky, A.V.
Loburev and M.S. Cherny
821
113.
HMT-97113
Heat transfer near the trailing edge of a cooled
turbine blade with special emphasis given to
pressure side cut-back length
Ganesh R. Iyer, Savash
Yavuzkurt and Cengiz
Camci
829
114.
HMT-97-114
Determination of optimal row spacing for a
staggered pin fin array in a turbine blade cooling
passage
E.E. Donahoo, A.K.
Kulkarni, A.D. Belegundu
and C. Camci
837
115.
HMT-97-115
The mathematical modeling of absorptiondiffusion refrigerators
V.N. Buz, H.F. Smirnov
and V.M. Podgoretsky
845
116.
HMT-97-116
Investigations on the vapor ejector autonomous
refrigerator characteristics
K.A. Goncharov, Yu. S.
Botuk, M.A. Bukraba,
V.N. Buz, A.I. Conoplev
and H.F. Smirnov
851
117.
HMT-97-117
Heat pipes state of the art for heat pumps
Boris V. Kosoi
857
118.
HMT-97-118
Effect of statistical and geometric parameters of
water distribution on cooling tower performance
T. Shivaraman, T.
Sundararajan and V.R.
Raghavan
861
8
119.
HMT-97-119
A study of heat and mass transfer in a vertical
evaporative cooler
S.S. Kachwaha, P.L. Dhar
and S.R. Kale
Combustion Processes
867
873-918
120.
HMT-97-120
On Dynamics of coal char combustion: ignition and
extinction behaviour
P. Gupta and R.K. Saha
873
121.
HMT-97-121
A heat transfer model of 1-D transient
temperature field in high speed jet of hot
propellant gases
Yu. Yonggang and Wang
Qinyong
879
122.
HMT-97-122
The thermochemical interaction of bodies with
high-temperature high-velocity gas flows
Yu. V. Polezhaev
123.
HMT-97-123
Entropy balance and exergy analysis in the process
of droplet combustion
S.D. Hiwase, A. Datta and
S.K. Som
124.
HMT-97-124
Effects of spray parameters on flame structure and
emission characteristics of gas turbine combustor
125.
HMT-97-125
Numerical investigation of stabilization region of
turbulent non-premixed flames
S.K. Chaturvedi, A.S.
Kheireddine and T.O.
Mohieldin
905
126.
HMT-97-126
Heat exchange and evaporation of non-stationary
fuel spray in heated medium
Valentin Nikolayevich
Lukanin and Georgi
Matveevitch Kamfer
911
127.
HMT-97-127
Heat and mass exchange of vapor and gas mixture
in generators
S.A. Doubenets, A.F.
Myandin and A.A.
Zintchouk
915
A. Datta and S.K.
Som
Manufacturing and Material Processing
883
889
897
919-998
128.
HMT-97-128
Effect of operating parameters on evaporative
material removal using high-energy laser beam
N.R. Pedanekar, B. Basu
and Pradip Majumdar
919
129.
HMT-97-129
Mathematical modeling of macrosegregation of
iron-carbon alloy: effect of key process and
physical parameters
A.K. Singh and B. Basu
925
130.
HMT-97-130
Surface displacements over a thermoelastic
halfspace without energy dissipation
Elizabeth Mathai
931
131.
HMT-97-131
A two-dimensional conduction model for laser
cladding
Subhransu Roy, Shouvik
Basu and A. Pandey
937
132.
HMT-97-132
Thermal analysis of slab caster mould
A.Paul, J.M. Korath, N.
Pradhan, A.K. ray, S.
Mazumdar, S.V.
Chandramouli,
Balasubramanium and
Somedev Das
943
9
133.
HMT-97-133
Comparative assessment of different models for
the two-dimensional laser melting problem
A.G. Marathe and M.R.
Ravi
949
134.
HMT-97-134
The metallic glasses formation in particle-laden
flows
Dmitry S. Mikhatulin,
Yuri V. Polezhaev, Dmitry
L. Revinznikov and Vitaly
V. Rusakov
955
135.
HMT-97-135
The properties of multifunction coatings
synthesized by cold gas dynamics method
P.V. Nikitine, N.A.
Andreeve, S.M. Prorokov
and A.G. Smolin
961
136.
HMT-97-136
Study of heat transfer under periodic concentrated
energy beam(CEB)
S. Sethi, R.K. Singh, L.M.
Ganayet and U.K.
Chatterjee
967
137.
HMT-97-137
Numerical simulation of free-jet expansion of
metal vapour
J. Mukherjee, L.M.
Gantayet and V. Kumar
973
138.
HMT-97-138
Laser glazing of porous coatings: effect of laset
piwer and traverse speed
T.A. Mahank, J. Singh
and A.K. Kulkarni
979
139.
HMT-97-139
Transport processes during synthesis of catalyst
particles in a VGCF reactor
AKM A. Hoque, M.K.
Alam and K.K. Wong
985
140.
HMT-97-140
A network approach for drying capillary porous
medium
X.F. yang, A. T. Prata and
P.C. Phillippi
993
Nuclear Reactor Heat Transfer
999-1126
141.
HMT-97-141
Thermal analysis of spent subassembly stuck-up
during handling
R. Gajapathy, K.
Velusamy, G.
Vaidyanathan and S.C.
Chetal
999
142.
HMT-97-142
Thermalevolution of PFBR IHX due to secondary
pump trip
Rama Swaminathan, G.
Vaidyanathan and S.C.
Chetal
1005
143.
HMT-97-143
Mixed convection of sodium in main vessel cooling
circuit of PFBR
K. Velusamy, T.
Sundararajan, G.
Vaidyanathan, S.C.
Chetal and S.B. Bhoje
1011
144.
HMT-97-145
Turbulent natural convection in the enclosure
formed by roof slab and main vessel of PFBR
R. Senthil Velavan, K.
Velusamy, T.
Sundararajan, G.
Padmanabham and G.
Vaidyanathan
1017
145.
HMT-97-145
Decay heat exchanger performance studies in
scaled models
M.V. Sridhara Rao, G.
Padmakumar, G.
Vaidyanathan and R.D.
Kale
1023
10
146.
HMT-97-146
Flow mixing experiments in a 37 rod bundle
B.V.S.S.S. Prasad, S.C.
Haldar, P.N. Prasad and
A.K. Mohanty(Late)
1029
147.
HMT-97-147
Design of safety grade decay heat removal system
of pfbr using fem
S. Athmaligam, A.
Selvaraj and S.C. Chetal
1035
148.
HMT-97-148
Preheating of pfbr reactor assembly components
V. Balasubramaniyam,
A.S.D. Mani, A. Selvaraj
and S.C. Chetal
1041
149.
HMT-97-149
Mixing pattern of a vertical cold jet in a hot pool
K. Velusamy, M.
Asokkumar, G.
Vaidyanathan and S.C.
Chetal
1047
150.
HMT-97-150
Study of temperature fluctuations due to mixing of
hot and cold jets in a fast reactor
K. Rajesh, G.
Ravichandran, G.
Vaidyanathan and R.D.
Kale
1053
151.
HMT-97-151
Two phase steam and high density liquid metal
vertical flow studies inlmmhd power conversion
system
P. Satyamurthy, N.
Venkatramani, A.M.
Quraishi and A. Mushtaq
1059
152.
HMT-97-152
Two phase natural circulation residual heat
removal
J.S. Jayakumar and R.B.
Grover
1065
153.
HMT-97-153
Unsteady heat and mass transfer in oval twisted
fuel rod bundle of space nuclear reactor
B.V. Dzyubenko and R.I.
Yakimenko
1071
154.
HMT-97-154
Upgraded rbmks emergency core cooling system
Oleg Yu. Novoselsky,
Vladimir N. Smolin,
Vladimir N. Filinov
1079
155.
HMT-97-155
Analysis of the moderator flow and temperature
distribution inside the calandria of Indian phwrs
K.S. Gupta, H.S.Bhambra,
D.S. Chawla and H.S.
Kushwaha
1083
156.
HMT-97-156
Transient temperatures in the seal disc of nuclear
reactors
K.S. Gupta, H.S.Bhambra,
D.S. Chawla and H.S.
Kushwaha
1089
157.
HMT-97-157
Hchf: a computer code to determine critical heat
flux in horizontal channel with and without
internals
H.G. Lele and S.K. Gupta
1095
158.
HMT-97-158
Small break loca analysis for Indian phwr(220
mwe)
B.Chatterjee,
D.Mukhopadhyay and
S.K. Gupta
1101
159.
HMT-97-159
Transient analysis of an indian 220 mwe phwr
power plant following tripping of one primary
circulating pump
Rajesh Kumar, Avinash
Gaikwad, G. Chakraborty
and V. Venkat Raj
1107
11
160.
HMT-97-160
Effect of space discretisation on the loca analyses
predictions using computer code RELAP4/MOD6
D. Mukhopadhyay, B.
Ghosh, S.K. Gupta and V.
Venkat Raj
1113
161.
HMT-97-161
Heat and mass transfer during evaporation and
calcinations of concentrated Radioactive liquid
waste
D.P. Pande, Neeraj Jain
and P.B.S. Sengar
1119
Energy Conversion and Utilization
1127-1190
162.
HMT-97-162
Heat transfer characteristics in a pressurized
circulating fluidized bed
P.K. Nag, A.V.S.S.K.S.
Gupta and Deepak
kumar
1127
163.
HMT-97-163
Effect of fins on heat transfer in the cyclone
separator of a cfb
P.K. Nag, A.V.S.S.K.S.
Gupta and A. Prem
Kumar
1131
164.
HMT-97-164
Studies in industrial cyclone heat exchanger
P. Ramanan, T.
Rajeswara Rao and B.
Pitchumani
1137
165.
HMT-97-165
Waste heat recovery boiler: second law analysis
B.V. Reddy and N.K.
Mitra
1143
166.
HMT-97-166
Power optimization of reciprocating stirling –like
engines with ideal regeneration, mixed-mode heat
transfer and finite reservoirs
David A. Blank
1149
167.
HMT-97-167
Temperature response of a packed bed thermal
storage system using an axial dispersion model for
fluid
Sarit Kumar Das, S.
Chakrabarti and R.V.
Kamat
1155
168.
HMT-97-168
Fluidized Bed Boiler Technology for a captive
power plant-criteria for selection
S. Krishnan,
S.Chakrabarti and
R.V.Kamat
1161
169.
HMT-97-169
Heat transfer in utilization systems of the internal
combustion engines
A.Sheipak, M. Chekalov,
V. Bogdanov and V.
Kapanjev
1169
170.
HMT-97-170
Influence of ambient conditions on the
thermodynamic performance of the kalian cycle
R.K. Sinha and R.P.
Vedula
1175
171.
HMT-97-171
Circulation rates in a single vertical tube
thermosiphon reboiler
S.S. Alam, Nihaluddin
and Mohd. Kamil
1179
172.
HMT-97-172
Energy analysis of an operating coal fired steam
power plant
A.K. Chaturvedi and S.S.
Kachhwaha
1185
Renewable Energy Systems
173.
HMT-97-173
A simple method to determine time constant of a
box type solar cooker with different food materials
12
1191-1226
M. Altamush Siddiqui
and Matiullah Khan
1191
174.
HMT-97-174
Optimum hot water temperature for the maximum
performance of the thermosyponic solar water
heater-cum-absorption systems
M. Arif and M. Altamush
Siddiqui
1197
175.
HMT-97-175
An experimental investigation on improvement of
thermal performance of solar air heaters using
inclined rib roughness an absorber oplates
Dhananjay Gupta, S.C.
Solanki and J.S. Saini
1203
176.
HMT-97-176
A method for transient testing of solar flat-plate
collectors
E.H. Amer, J.K. Nayak
and G.K. Sharma
1209
177.
HMT-97-177
Numerical simulation of a thermal siding of a
building
S. Amiroudine, N.
Miolard, M. Dupont and
P.H. Nguyen
1215
178.
HMT-97-178
Studies on performance characteristics of a solar
parabolic through concentrator with a variable
area absorber
C.M. Narayanan
1221
13