1
Session 1- Indirect Restorative Materials (Thursday 9th, October, 11 am).
1. Effect of ferrule location on fracture resistance of crowned premolars. A.
Samran 1,2*, M. AL-Afandi 2,3, J. Kadour3,4 and M. Kern1 (1ChristianAlbrechts University, Kiel, Germany; 2Ibb University, Yemen; 3Alfarabi
Dental College, Saudi Arabia; 4Aleppo University, Syria).
2. Evaluation of surface topography of zirconia after Er:YAG laser etching. V.
Turp, D. Sen*, G. Akgungor, B. Tuncelli (Istanbul University Faculty of
Dentistry, Department of Prosthodontics. Istanbul, Turkey).
3. Synthesis and characterization of Y-TZP/TiO2 composites with different
TiO2 contents. R. Miranda 1, V. Ussui 2, D. Lazar 2, J. Marchi 3, W. Miranda
1, P. Cesar* 1 (1 University of São Paulo, Brazil, 2 Institute for Nuclear
and Energetic Research, Brazil, 3 Federal University of the ABC, Brazil).
4. Fracture of fibre-reinforced composite crowns versus CAD/CAM
alternatives. A.Al-Haddad*, N.Silikas, J.Satterthwaite (University of
Manchester,UK).
5. Energy Requirements for Curing Light Activated Cements Through
CAD/CAM Materials. N.E. Goetz, C. Shen, J.-F. Roulet* (University of
Florida, Department of Restorative Dental Sciences, Gainesville Florida,
USA).
6. Bond strength of Y-TZP zirconia ceramic to different core materials. C.R.G.
Torres* 1, F.C. Frattes 1, J.B.S. Oliveira 1, C.R. Pucci 1, A.B. Borges 1 (1 Sao
Paulo State University – UNESP, Institute of Science and Technology,
Department of Restorative Dentistry, Sao Jose Dos Campos, Brazil).
7. Thermal mismatch influence on residual stress in veneer on zirconia. AK.
Mainjot 1,2*, Achref Najjar 2, Boris D. Jakubowicz-Kohen2, Michaël J.
Sadoun 2 (1 Department of Fixed Prosthodontics, Institute of Dentistry,
University of Liège Hospital, Belgium. 2 Unité De Recherches
Biomatériaux Innovants Et Interfaces (URB2I-EA4462), Université Paris
Descartes, Paris, France).
8. Property of experimental temporary resin-cements made from different
resin monomers. Y. Nagasawa*, Y. Hibino, H. Shigeta, H. Nakajima (Meikai
University, Japan)
9. Dentin Bond Strength of Two Recent CAD/CAM-Materials after Storage. S.
Flury*, S. Z. Schmidt, A. Peutzfeldt, A. Lussi (Department of Preventive,
Restorative and Pediatric Dentistry, School of Dental Medicine, University
of Bern, Switzerland).
10. BFS of zirconia-based ceramic with veneering porcelain from various
manufacturers. N. Chantranikul, P. Salimee * (Chulalongkorn University,
Department of Prosthodontics, Bangkok, Thailand)
2
11. Fracture resistance of teeth restored with built up composite ferrule. U.
Puengpaiboon * (Srinakharinwirot University, Department of General
Dentistry, Bangkok, Thailand).
12. Vertical misfit of CAD/CAM zirconia and titanium frameworks for
prosthesis. E.A. Gomes* 1, R.F. Ribeiro 2, R. Tiossi 3, R.C.S. Rodrigues 2,
Y.T. Silva-Sousa 1 (1 University of Ribeirão Preto, School of Dentistry,
Ribeirão Preto, Brazil, 2 University of São Paulo, Department of Dental
Materials and Prosthodontics, Ribeirão Preto, Brazil, 3 Fluminense
Federal University, Department of Prosthodontics, Niterói, Brazil).
13. Bonding ability of experimental light-curing resin-cements to
water/ethanol-wet root-dentin. A. Zavattini* 1, V. P. Feitosa 2, F.
Mannocci 3, F. Foschi 3, A. Babbar 3, Ottria L 1, F. Mangani 4, S. Sauro 5 (1
Department of Clinical Sciences and Translational Medicine, University of
Roma Torvergata, Rome, Italy, 2 Federal University of Ceará,Fortaleza,
Brazil, 3 King’S College London Dental Institute at Guy’S Hospital, London,
UK, 4 Department of Restorative Dentistry, University of Roma
Torvergata, Rome, Italy, 5 Universidad CEU-Cardenal Herrera, Valencia,
Spain).
14. Effect of Water Immersion on Monomer and Strength of FRC. W.
Siswomihardjo * 1,S. Sunarintyas 1, A.F. Omar Khatab Khan 1, N.S.I.
Sahidu 1, J.P. Matinlinna 2 (1 Universitas Gadjah Mada, Indonesia, 2
University of Hong Kong, Hong Kong)
15. Subcritical crack growth in porcelain-zirconia bilayer: an unbonded
model. R. Belli 1*, M. Wendler 1, 2, J. I. Zorzin 1, A. Petschelt 1, U.
Lohbauer 1 (1 Laboratory for Biomaterials Research, University of
Erlangen-Nuremberg, Erlangen, Germany. 2 Department of Restorative
Dentistry, Faculty of Dentistry, University of Concepcion, Concepcion,
Chile).
16. Fracture analysis of veneered zirconia abutments of screw-retained single
crowns. J. Gavric*, O. Moraguez, I. Sailer, H.W.A. Wiskott, S.S. Scherrer
(Department of Fixed Posthodontics - Biomaterials, School of Dental
Medicine, University of Geneva, Switzerland)
17. Y-TZP Reinforced with Carbon Nanotubes: Synthesis, Microstructure and
Flexural Strength. L.H. Silva* 1, R. Belli 2, D.R.R. Lazar 3, R.N. Tango 4, U.
Lohbauer 2, P.F. Cesar 1. (1 University of São Paulo - USP, Brazil; 2
University of Erlangen-Nuremberg, Germany; 3 Institute of Energy and
Nuclear Research - IPEN, Brazil; 4 São Paulo State University - UNESP,
Brazil).
18. Tensile bond strength of cement systems to lithium disilicate ceramic. B.
Spaggiari* 1, G. Chiodo2, D. Bernaroli1, P. Bertani3, P. Generali4, M.
Mattarozzi5, A. Pirondi6, C. Galli1, M.Bonanini1 (1 Dep. Biomedical,
Biotechnological and Translational Sciences, University of Parma, Parma,
Italy; 2 Centrositeia.Parma, University of Parma; 3Private Practice, Parma,
3
Italy; 4 Private Practice, Piacenza, Italy; 5Dep. of Chemistry, University of
Parma, Parma, Italy; 3Dep. Industrial Engineering, University of Parma,
Parma, Italy).
19. Influence of preparation design on fracture strength of ceramic veneers.
C. Gutiérrez , C.M. Velho*, L.A. Linhares, L.F. Pottmaier, D.P. Lise, V.C.
Ruschel, C.G. Savi, L.N. Baratieri, L.C. Vieira (Federal University of Santa
Catarina, Brazil).
20. Z-Prime Plus Improves Bond Strength of RM-GIC on Zirconia. L. Chen, J.
Zuffa, H. Shen*, B.I. Suh (Bisco Inc, USA).
21. Critical role of firing temperature on stress deflection of ceramics. MJ
Tholey* 1, BA Just 1, V Mercurio 2, M Swain 3, J Fischer 1 4 (1 VITA
Zahnfabrik, Bad Säckingen, Germany 2 Expert Systems Solutions, Modena,
Italy 3 University of Sydney, Australia 4 Institute for Material Sciences
and Engineering, University Hospital of Dental Medicine, University of
Basel, Switzerland).
22. Comparison of conventional veneering and CAD/CAM veneering solution
method. MJ Tholey 1, BA Just* 1, M Swain 2, J Fischer 1 3 (1 VITA
Zahnfabrik, Bad Säckingen, Germany 2 University of Sydney, Australia 3
Institute for Material Sciences and Engineering, University Hospital of
Dental Medicine, University of Basel, Switzerland).
23. Effect of endodontic irrigants on long-term intraradicular adhesion of
resin-cements. F.Lacerda, F.B. Amaral, R.T.Basting, C.P. Turssi, F.M.G.
França*, (São Leopoldo Mandic Institute and Dental Research Center).
24. Analysis of Failure During Shear Testing by Scaling and Fractography.
Sultan H, Kazemi R, Kelly JR* (University of Connecticut Health Center,
Farmington, CT, USA).
25. Roughness and Microstructural Changes in Y-TZP Laser Treated Before
Sintering. A. Verna* 1, P. F. Cesar 1, L. F. Valandro 2, C. Monaco 3, P.
Baldissara 3, R. Scotti 3, M. Oda 1. (1 University of São Paulo, BRA, 2
University of Santa Maria, BRA, 3 University of Bologna, IT).
26. Alternative Surface Treatments for Improved Bonding to Ceramic. Lanza
MDS1, Lanza FJSR1, Manso AP1, Matinlinna JP2, Carvalho RM1*.
(1Department of Oral Biological and Medical Sciences, Faculty of
Dentistry, the University of British Columbia, Vancouver, BC, Canada;
2Department of Dental Materials Science, Faculty of Dentistry, the
University of Hong Kong, Hong Kong, China).
27. Fracture origins in alumina crowns fractured during clinical function. M.
Øilo*1, G.D. Quinn 2 (1 University of Bergen, Faculty of Medicine and
Dentistry, Department of Clinical Dentistry, Bergen, Norway, 2 National
Institute of Standards and Technology,NIST, USA).
28. Transmission of light through individually formed fiber-reinforced
composite post. J.L. Jaatinen*, L.V.J. Lassila, T. Närhi, P.K. Vallittu, A-M. Le
Bell-Rönnlöf. (University of Turku, Department of Prosthetic Dentistry,
4
Department of Biomaterials Science and Turku Clinical Biomaterials
Centre - TCBC, Turku, Finland).
29. Cervical margin-relocation of CAD/CAM lithium disilicate ceramic crown
using resin-composite. G. Marchesi*1,R. Spreafico 2 , A. Frassetto 1, G.
Turco 1, R. Di Lenarda 1, M. Cadenaro 1, L. Breschi 3. (1 University of
Trieste, Department of Medical Sciences Italy, 2Private Practice, Busto
Arsizio Varese, Italy, 3 University of Bologna, Italy.)
30. Adhesion promotion of resin to zirconia by silicon nitride hydrolysis. CYK
Lung, DL, JKH Tsoi, JP Matinlinna* (Dental Materials Science, Faculty of
Dentistry, the University of Hong Kong, Hong Kong SAR, PR China).
31. The effect of clinical finish on the zirconia roughness surface. J.R.C
Queiroz* 1, M.B. Bandeira 1, I.M.S Queiroz 1, B. Henriques 2, A.E.
Martinelli 2, S.A. Souza 1, A.F. Neto 1, B.M.F. Pereira 1, A.H.M. Dias 1, A.C.
Freitas Junior 1 ( UNP - Laureate University, Brazil, 2 Universidade
Federal Do Rio Grande Do Norte, Brazil).
32. Development and evaluation of new extra high translucent Zirconia. M.
Yoshinaga*, D. Ohta, T. Sato, F. Fusejima, T. Kumagai (GC Corporation,
Tokyo, Japan).
33. Self-Adhesive Resin Cements: In-Vitro Free Expansion Stress, pHNeutralization and Hydrophilicity. J. Zorzin*, L. Rödel, V. Bednarzig, R.
Belli, A. Petchelt, U. Lohbauer (Dental Clinic 1 - Operative Dentistry and
Periodontology, University of Erlangen, Germany).
34. Effect of high-power-laser and graphite surface treatements on ceramics
bond-strength. C.R. Pucci*1, F.A. Feitosa 1, A.L.F. Loriggio 1, S.A. Feitosa 1,
R.M. Araújo 1, F.R. Tay2 (1 Institute of Science and Technology, São Paulo
State University, São José Dos Campos, SP, Brazil, 2 College of Dental
Medicine, Georgia Health Sciences University, Augusta, GA, USA).
35. Fracture Strength of Artificially Aged Zirconia-Based Crowns. DP Lameira
1, WAB Silva 1, GD De Souza* 2 (1 Faculty of Dentistry, UNICAMP, Brazil;
2 Faculty of Dentistry, University of Toronto, Canada).
36. Different framework materials for implant-supported prostheses: 3D
finite element analysis. M. Menini, M. Bevilacqua, F. Pera, S. Bini*, T.
Tealdo, P. Pera (Department of Prosthodontics, University of Genoa,
Italy).
37. Push-out bond strength of customized fiberglass posts to dentin. T.Y.U.
Suzuki* 1, A.G.L. Godas 1, A.P.A. Guedes 2, D.P. Lise 3, J.E. Gomes-Filho 1,
A.L.F. Briso 1, W.G. Assunção 1, P.H. Dos Santos 1. (1 Sao Paulo State
University, Brazil, 3 Federal University of Espirito Santo, Brazil, 2 Federal
University of Santa Catarina, Brazil).
38. Fatigue resistance of Y-TZP/porcelain crowns. S. Pereira*, L.C. Anami 1,
J.M.C. Lima 1, L.F. Valandro 2, C.J. Kleverlaan 3, A.J. Feilzer 3, M.A. Bottino
1 (1 Univ Estatual Paulista - UNESP, Brazil; 2 Federal University of Santa
5
Maria, Brazil; 3 Academisch Centrum Tandheelkunde Amsterdam,
Netherlads).
39. Bond durability between ceramic-resin cement: silane heat treatment
effect. F.P.P Leite* 1, M.G.A.M Chaves 1, A.P.P Leite 1, M.R. Duarte 1, R.F.
Carvalho 1, R.L.A. Carvalho 2, E.T. Kimpara 2 (1 University Federal of Juiz
De Fora, Brazil, 2 Institute of Science and Technology of São José Dos
Campos, UNESP, Brazil).
40. Optimization of Silane Application for CAD/CAM Ceramic Resin Bonding.
P. Magne 1, G. Bruzi* 2, A.O. Carvalho 3, R. Enciso 1, M. Giannini 4, H.P.
Maia 2 (1 University of Southern California, Restorative Sciences, Los
Angeles, USA; 2 Federal University of Santa Catarina, Operative Dentistry,
Florianópolis, Brazil; 3 Feira De Santana State University, Integrated
Clinical, Feira De Santana, Brazil; 4 Piracicaba Dental School, State
University of Campinas, Restorative Dentistry, Piracicaba, Brazil).
41. Curing-mode effects on flexural strength and modulus of resin cements. B.
Fronza*, R.R. Pacheco 1, D. Mettenburg 2, F.A. Rueggeberg 2, M. Giannini
1 (1 Department of Restorative Dentistry, Piracicaba Dental School, State
University of Campinas, Piracicaba, SP, Brazil 2 Department of Oral
Rehabilitation, College of Dental Medicine, Georgia Regents University,
Augusta, GA, USA).
42. Mechanical evaluation and Fem/Sem analysis of stress in FPDs. C.Arcuri ,
P. Pierluigi , V.Vertucci* , F.Balestra . (University of Rome Tor Vergata,
IT,).
43. The Influence of Bleaching Agent on Dental Ceramics Surface. L.
Vavrickova* 1, A. Krejcova 2(1 Charles University, Faculty of Medicine In
Hradec Kralove, Department of Dentistry, Hradec Kralove, Czech
Republic, 2 University of Pardubice, Faculty of Chemical Technology,
Institut of Environmental and Chemical Engeneering, Pardubice, Czech
Republic).
44. Bond Strength of Co-Cr/Ceramic Produced With Three Different
Technologies. C. Monaco*, C. Langenohl#, M. Pasquinelli, A. Llukacej, N.
Ragazzini, E. Evangelisti, R. Scotti. (University of Bologna, Division of
Prosthodontics and Maxillo-Facial Rehabilitation, Department of
Biomedical and Neuromotor Sciences, Bologna, Italy. #. Research and
Development, Nobil Metal, Villafranca D’Asti , Italy).
45. Bonding to Zirconia and Lithium-Disilicate: Analysis of Different Chemical
Treatments. C. Giuliano*, D. Selaj, E. Manzon, D. Pasqualini, E. Berutti, N.
Scotti (Dental School Lingotto, Department of Surgical Sciences, Torino,
Italy).
46. Residual stress of veneered porcelain by ion beam ring-core method. F.
Massimi* 1, M. Sebastiani 1, I. Tredici 2, T. Lucco Castello 2, P. Menghini
2, G. Merlati 2 (1 University of Roma Tre, 2 University of Pavia, Italy).
6
47. Effect of onium salt and amines on experimental resin cements. A.F.
Lima* 1; Andrade K.M. 2; Pallialol A.R. 3; Lancelloti A.C. 3; Goncalves L.S.
4; Consani S. 3; Marchi G.M. 3 (1 Nove De Julho University, Sao Paulo,
Brazil; 2 State University of Amazonas, Manaus, Brazil; 3 Piracicaba
Dental School, State University of Campinas, Piracicaba, Brazil; 4 School of
Dentistry, University of Uberaba, Brazil).
48. Design and heat on flexural strength in 3Y-TZP FDPs. Falk A*1, Vult Von
Steyern P 1, Fransson H 1, Molin Thorén M 2 (1 Malmö University,
Department of Dental Material Science, Malmö, Sweden and 2 Umeå
University, Faculty of Medicine, Department of Prosthetic Dentistry,
Umeå, Sweden).
49. Effects of hydrofluoric acid etching on lithium disilicate. G.M. Iorizzo*, F.
Prete, B. Mazzanti, G. Timellini, R. Scotti, P. Baldissara (Alma Mater
Studiorum University of Bologna, Bologna, Italy).
50. Effect of atmospheric plasma on the bond strength to zirconia. W.M.
Negreiros*, V.T.F.S. De Souza, B.B. Lopes, M. Giannini (State University of
Campinas, Department of Restorative Dentistry, Piracicaba, Brazil).
51. Micrometric precision of prosthetic dental crowns obtained by CAD/CAM
system. K. Zancope *,F.D. Neves 1, T.A.P.N. Carneiro 1, C.J. Prado 1, M.S.
Prudente 1, L.R. Davi 1, G. Mendonça 2, C.J. Soares 1 (1 Federal University
of Uberlândia, Brazil, 2 University of North Caroline at Chapel Hill, USA)
52. Dimensional Changes Approach of Alginate Impressions. C Sinescu1, M-L
Negrutiu1, C Timofte1, A-T Stan*2, A-C Cojocariu2, C Eremia2, M Milos 3
(1-Propaedeutics and Dental Materials Department, Faculty of Dental
Medicine, UMF “Victor Babes” Timisoara 2- Dr. Med. Dent., Country
Manager – Heraeus Kulzer Romania 3- Dental Technician ).
53. Dentin interaction of multi-mode adhesives to chemical/dual-cured resin
cements. M.F. De Goes*1, I.R.Guimarães 1, M.S. Shinohara 2 (1 Piracicaba
Dental School, UNICAMP, SP, Brazil, 2 Araçatuba Dental School, UNESP, SP
Brazil).
54. Experimental tribo-chemical and silica-rich air-abrasion to enhance
bonding to zirconia. A. Darvizeh* 1, A. Abedi-Amin 1, A. Oliveira-Ogliari 2,
F. Ogliari 2, R. Moraes 2, V. Feitosa 3. A. Luzi 1, S. Sauro 1 (1 Universidad
CEU Cardenal Herrera, Valencia, Spain; 2 Federal University of Pelotas,
Pelotas, Brazil; 3 Federal University of Ceará, Fortaleza, Brazil).
55. Cooling rate effect of layered and pressed porcelains for zirconia. G.L.
Adabo*, D. Longhini, R.G. Fonseca (Dental School of Araraquara, Sao
Paulo State University, Brazil).
56. Filler particles analysis and degree of conversion of resin cements. A.C.
Lancellotti* 1, R.R. Pacheco 1, L.S. Gonçalves 2, M. Giannini 1 (1
Piracicaba Dental School, State University of Campinas, Piracicaba, Brazil;
2 School of Dentistry, University of Uberaba, Uberaba, Brazil).
7
57. A new jig for i-shaped specimens: FEA and microtensile test. L.T.
Yamamoto*, C. Cotes, A.L.S. Borges, R.N. Tango (Department of Dental
Materials and Prosthodontics, School of Dentistry, Institute of Science and
Technology, Unesp, São José Dos Campos, Brazil).
58. Inlays Made of a Hybrid Material: Adaptation and Bond Strengths. MA
Bottino* 1, F Campos 1, NC Ramos 1, MP Rippe 2, LF Valandro 2, RM Melo
1 (1 Univ Estadual Paulista, Brazil, 2 Federal University of Santa Maria,
Brazil).
59. Microscopical Evaluation of An Experimental Luting Material After
Thermocycling. N. Barabanti*, F.Bassi, P.A. Acquaviva, A. Preti, A. Cerutti
(University of Brescia, Italy).
60. Effect of Fluorination Treatment on Hydrolytic Degradation Resistance of
Y-TZP. G.V. Joshi 1, J. Piascik 2, J.A. Griggs* 1 (1 University of Mississippi
Medical Center, Department of Biomedical Materials Science, Jackson, MS,
USA; 2 RTI International, Center for Materials and Electronic
Technologies, RTP, NC, USA).
61. Fracture toughness of minimum invasive ceramic veneers. L.A.
Linhares*, E. Araujo, G.C. Lopes (Universidade Federal De Santa Catarina,
Florianópolis, Brazil).
62. Effects of Grinding procedures on Post-Sintered Zirconia’s fatigue
resistance. F Fontana*1, R Garcia Fonseca2,G Gambi1, MRA Gatto1, P
Baldissara1 (1University of Bologna Alma Mater Studiorum, Bologna,
Italy 2Araraquara Dental School, São Paulo State University – UNESP,
Brazil).
63. Effect of pre-treatments on color and translucency of Translucent
Zirconia. M. Carrabba*, A. Vichi, M. Ferrari (Department of Medical
Biotechnologies, University of Siena, Italy).
64. Characterization of thermal residual stresses in zirconia veneered
bilayers. M. Wendler 1,2 *, R. Belli 1, A. Petschelt 1, U. Lohbauer 1 (1
Laboratory for Biomaterials Research, Dental Clinic 1 - Operative
Dentistry and Periodontology, University of Erlangen-Nuernberg,
Erlangen, Germany; 2 Department of Restorative Dentistry, Faculty of
Dentistry, University of Concepción, Concepción, Chile.).
65. Roughness of lithium-silicate and lithium-disilicate ceramics after HF
etching. R. Fabian Fonzar*, M. Tricarico, M. Sedda, M. Carrabba, A. Vichi,
M. Ferrari (University of Siena, Department of Medical Biotechnologies,
Siena, Italy).
66. Effects of gas plasma treatment on zirconia- veneering ceramics bonding.
Y.C. Liu* 12 C.S. Hwang 1 and S.F. Chuang 2,3 (1 Department of Materials
Science and Engineering, National Cheng Kung University, Tainan, Taiwan
2 Institute of Oral Medicine, National Cheng Kung University, Tainan,
Taiwan 3 Department of Stomatology, National Cheng Kung University
Hospital, Taiwan).
8
67. Intra-oral aging and storage influence on ceramic/cement bond strength.
C. Cotes* 1, V.C. Macedo 1, R.F. Carvalho 1, R.N. Tango 1, F.P.P. Leite 2, E.T.
Kimpara 1. (1 UNESP - Univ Estadual Paulista, BRA, 2 UFJF, BRA).
68. Production of Y-TZP nanostructured sintered samples as core materials.
M. Sebastiani* 1, I.G. Tredici 2, F. Massimi 1, T. Lucco Castello 2, P.
Menghini 2, G. Merlati 2, U. Anselmi Tamburini 2 (1 University of Roma
Tre, 2 University of Pavia, Italy).
69. Translucency of ceramics used as infrastructure for fixed partial dentures.
Q.N. Sonza*1, A. Girotto 1, M. Borba 1 (1 University of Passo Fundo, PosGraduation Program In Dentistry, Passo Fundo, Brazil).
70. Why thick zirconia-veneers are more prone to chipping? A.N. Jikihara 1,
C.B. Tanaka 1, J.B.C. Meira *1 (University of Sao Paulo, Department of
Biomaterials and Oral Biology, Sao Paulo, Brazil).
71. Translucent properties of monolithic zirconia as a function of thickness. T.
Sulaiman 1,2,3, A.A. Abdulmajeed* 1,3, T.E. Donovan 2, P.K. Vallittu 1,3,
T.O. Närhi 1,3, L.V. Lassila 1,3 (1 University of Turku, Department of
Prosthetic Dentistry and Biomaterials Science, Turku, Finland 2
University of North Carolina, Department of Operative Dentistry, Chapel
Hill, USA 3 University of Turku, Turku Clinical Biomaterials Centre –
TCBC, Turku, Finland).
72. Elastic modulus of resin-based cements and strengthening of feldspathic
ceramic. A.O. Spazzin 1, R. Alexandretti 2, A. Bacchi 1, M.B. Dos Santos 3,
R.R. Moraes* 3 (1 School of Dentistry, Meridional Faculty-IMED, Brazil; 2
School of Dentistry, University of Passo Fundo, Brazil; 3 School of
Dentistry, Federal University of Pelotas, Brazil).
73. Effect of silica-coating with different particle sizes on Y-TZP strength. SM
Salazar Marocho*, DS Manarão, Y Correia, WG Miranda Jr, PF Cesar
(Department of Biomaterials and Oral Biology, School of Dentistry.
University of São Paulo, São Paulo, Brazil).
74. Zirconia/ceramic veneer interface: a X-ray spectrometer analysis. C.
Monaco, A. Arena*, D. Lodi Giuliani, R. Scotti (University of Bologna,
Division of Prosthodontics and Maxillofacial Rehabilitation, Department
of Biomedical and Neuromotor Sciences, Bologna, Italy).
75. Low-Temperature Degradation Effect on the Mechanical Behavior of
Ground Y-TZP. M.P. Rippe* 1, G.K.R. Pereira 1, M. Amaral 2, M.C. Bottino
3, P.F. Cesar 4, L.F. Valandro 1 (1 Federal University of Santa Maria, BR, 2
São Paulo State University 2, BR, 3 Indiana University School of
Dentistry,USA, 4 University of São Paulo, BR).
76. Slow crack growth behavior of two porcelain-zirconia systems. M.
Amaral* 1, G.F. Ramos 1, J.N. Luz 1, M.A. Bottino 1, R.M. Melo, L.F.
Valandro 2. (1 Sao Paulo State University, Sao Jose Dos Campos, BR, 2
Federal University of Santa Maria, Santa Maria, BR).
9
77. Hydrofluoric Acid Concentration Effect on Resin Adhesion to Feldspathic
Ceramic. A.B. Venturini 1, C. Prochnow 1, D. Rambo 1, A. Gundel 2, L.F.
Valandro* 1 (1 Federal University of Santa Maria, BR, 2 Federal
University of the Pampa, BR).
78. Fatigue resistance of minimal invasive ceramic cantilever restorations. M.
M. Mutluay 1, S. Türkaslan 2, B. Bagis 3 and A. Tezvergil-Mutluay* 1
(University of Turku, Finland).
79. Influence of etching procedure on pressable and CAD-CAM lithiumdisilicate surface. M. Sedda*, R. Fabian Fonzar, M. Carrabba, M. Tricarico,
A. Vichi, M. Ferrari. (University of Siena, Department of Medial
Biotechnologies, Siena, Italy).
80. Mechanical reliability of ceramic FPDs prepared using the CAD-on
technology. GR Basso* 1, Moraes RR 1, Griggs J 2, Borba M 3, Della Bona A
3. (1 Federal University of Pelotas, BR, 2 University of Mississippi Medical
Center, USA, 3 University of Passo Fundo, BR).
81. Shear bond strength between acrylic resin teeth and composite resin.
M.A. Basílio* 1, K.V. Cardoso 1, G.M.R.M. De Souza 1, E.M. Mariscal 1, J.N.
Arioli-Filho (UNESP - Univ Estadual Paulista, Department of Dental
Materials and Prosthodontics, Araraquara, Brazil).
82. Microtensile Bond Strength to Ceramic of Experimental Resin Cements.
A.R.M. Palialol* 2, A.F. Lima 1, A.C.R.A. Lancellotti 2, F.H.B. Aguiar 2, L.S.
Gonçalves 3, S. Consani 2, G.M. Marchi 2 (1 Nove De Julho University, Sao
Paulo, Brazil; 2 Piracicaba Dental School, State University of Campinas,
Piracicaba, Brazil; 3 School of Dentistry, University of Uberaba, Brazil).
83. Fatigue resistance of monolithic and layered zirconia and LiSi2 crowns. P.
Baldissara* 1, E. Gobbetti 1, L.F. Valandro 2, R.G. Fonseca 3, C. Monaco 1.
(1 University of Bologna, Italy, 2 University of Santa Maria, Brazil, 3,
University of Araraquara, Brazil).
84. Fractographic analysis of monolithic lithium disilicate crowns. B.
Borelli*1, R. Sorrentino 2, S. Scherrer 3, M. Ferrari 4, F. Zarone 1 (1
University of Naples Federico II, Napoli, Italy, 2 Second University of
Naples, Napoli, Italy, 3 School of Dental Medicine, University of Geneva,
Geneva, Switzerland, 4 University of Siena, Tuscan School of Dental
Medicine, Siena, Italy).
85. Methacrylate Bonding to Zirconia by Situ Silica Nanoparticle Surface
Deposition. G.S. Lima*, A.O. Ogliari, V.P. Feitosa, F.M. Collares, S. Sauro,
F.A. Ogliari, R.R. Moraes (Federal University of Pelotas, Brazil).
86. SCG Parameters of a Y-TZP determined using step-stress method. K.A.
Fukushima*1, S.G. Riman1, G.V. Joshi2, J.A. Griggs2, P.F. Cesar1. (1
University of São Paulo, Department of Biomaterials and Oral Biology,
School of Dentistry, São Paulo, Brazil; 2 University of Mississippi Medical
Center, Department of Biomedical Materials Science, School of Dentistry,
Jackson, USA).
10
87. Light source influences degree of conversion of dual-curing luting
composites. F. Bassi*, S. Brazzoli, G. Ciampalini, P. Acquaviva, A. Cerutti
(University of Brescia, Brescia, Italy).
88. Effect of AGNPS/F.Oxysporum on the mechanical/antimicrobial
properties of acrylic resin. A.L.S. Borges* 1, T.P. Sato 1, C. Conjo 1, R.D.
Rossoni 2, J.C. Junqueira 1, P.D. Marcato 2, N.E.D. Caballero 3, S.M. Rode 1,
R.M. Melo 1 (1 UNESP, Brazil, 2 USP, Brazil, 3 UNICAMP, Brazil).
89. Effects of marginal preparation and fatigue-cyclic loading on zirconia
phase-transformation. C.O. Navarra* (University of Trieste, Italy).
11
Session 2-Direct Restorative Materials (Thursday 9th, October, 11 am).
90. Effect of short glass fibers on composite K1c and shrinkage T.A. Xavier 1, D. Mita
1, A.C.E. Bocalon 1, B.A. Pinheiro 1, Paul Shouha 2, R.R. Braga* 1 (1 University of
São Paulo, Department of Biomaterials and Oral Biology, São Paulo, Brazil; 2
Biomaterials Science Research Unit, University of Sydney, Australia).
91. Performance of laminate and non-laminate resin composite restorations: a metaanalysis K.V. Nguyen* 1, C. Sathorn 1, R. Wong 1, M.F. Burrow 2 (1 University of
Melbourne, AUS, 2 University of Hong Kong, HK).
92. Bulk Fill Resin Composites Cured with Single-peak versus Dual-peak LCUs. A
Santini*, M Aldossary (University of Edinburgh, Edinburgh Dental Institute, UK).
93. Effect of Curing Time on Vickers Microhardness of Bulk-Fill Materials M.
Aldossary*, A. Santini (University of Edinburgh, Edinburgh Dental Institute, UK).
94. Leaching of monomers from bulk-fill composites H.M. Kopperud*, I.S. Kleven, T.
Knarvang, H. Wellendorf (NIOM – Nordic Institute of Dental Materials, Oslo,
Norway).
95. Effect of curing devices to curing depth of four composites P. Thanyakoop*, S,
Angwarawung, L. Pataratanasombut, P.Chinpakdee (Khon Kaen University,
Thailand).
96. Energy density limits for adequate curing in low-viscosity bulk-fill composites N.
Ilie* and K. Stark (Ludwig-Maximilians-University of Munich, Germany).
97. Effects of composition and temperature on rheology of model resin-composites
K. Al-Ahdal*1,2, N. Silikas 1, D. C. Watts 1 (1 Biomaterials Science Research
Group, School of Dentistry, University of Manchester. 2 College of Dentistry, King
Saud University, Riyadh, Saudi Arabia).
98. Polymerization Shrinkage of Recent Low-shrinkage and Bulk-fill Resin
Composites T. Maseki*, M. Maeno, S. Ogawa, Y. Nara (Department of Adhesive
Dentistry, School of Life Dentistry at Tokyo, the Nippon Dental University, Tokyo,
Japan).
99. Microleakage evaluation between higher viscosity and flowable bulk composite
resins K. Tolidis*, C. Boutsiouki, P. Gerasimou, E. Panagiotidou (Operative
Dentistry Dept, Aristotle University of Thessaloniki, Greece).
100.
Polymerization efficiency of bulk fill composite resins K Tolidis, D.
Dionysopoulos, C. Harisi, P. Gerasimou, S. Vlachou* (University of Thessaloniki,
Greece).
101.
Influence of bulkfil vs. conventional composite on etch-and-rinse
adhesives. M. Taschner*1, S. Wild1, A. Petschelt1, J. Zorzin1 (University Clinic of
Erlangen, Operative Dentistry, Erlangen, Germany).
102.
Physical Properties of a New Bulk Fill Flowable Composite. K. Esquibel, A.
Gonzalez and C. Bracho-Troconis* (Septodont, Colorado Research Center,
Louisville, Colorado, USA).
103.
Polymerization shrinkage stress and tooth-restoration interfacial
debonding of bulk-fill composites. R. Kim*, I. Lee (Seoul National University,
12
Conservative Dentistry, Seoul, South Korea).
104.
Polymer Nanocarriers as New Fillers for Dental Adhesives. R Osorio*1, E
Osorio 1, Al Medina-Castillo 2, M Toledano 1. (1 University of Granada, Spain. 2
Nanomyp, Spin-Off Enterprise University of Granada, Spain).
105.
µCT evaluation of volume changes of regular versus low-shrinkage
composites R. Hirata1*, E Clozza1, M Giannini2, M Janal1, N Tovar1, E Bonfante3,
PG. Coelho1 (1 New York University US, 2 University of Campinas, Brazil, 3
University of Sao Paulo, Brazil).
106.
Polymerization Kinetics of Hydrophilic-rich Phase in Phase-separated
Dentin Adhesives F Abedin1, SE De Paiva Goncalves*2, Q Ye1, J Laurence1, P
Spencer1 (1University of Kansas, Lawrence, Kansas, USA, 2Univ Estadual Paulista
- UNESP, Sao Jose Dos Campos, School of Dentistry, Brazil).
107.
Wear resistance of newly developed experimental synthetic hard resins. T.
Shoji*, D. Machida, T. Kumagai (Research and Development Department GC
Corporation, Tokyo, Japan).
108.
Examinations with PEEK-Polymer as a Telescopic-Crown Material. N.
Holzer *, H. C. Roggendorf, F.-J. Faber (University of Cologne, School of Dental
and Oral Medicine, Cologne, Germany)
109.
Fiber-reinforced composite fixed dental prostheses with shell-shapedteeth used as pontics. L. Perea* 1, J.P. Matinlinna 2, M. Tolvanen 3, L.V. Lassila 1,
P.K. Vallittu 1 (1 Institute of Dentistry, Department of Biomaterials Science and
Turku Clinical Biomaterials Centre - TCBC, University of Turku, Turku, Finland, 2
Faculty of Dentistry, Dental Materials Science, the University of Hong Kong, Hong
Kong SAR, PR China, 3 Department of Community Dentistry, University of Turku,
Turku, Finland).
110.
New method for in-vitro evaluation of pit-and-fissure sealant
performance. B. Gebhardt*, A. Cavalleri, M. Müller, T. Bock (Ivoclar Vivadent AG,
Schaan, Liechtenstein).
111.
Effect of nanoseal on bond strength to various treated dentin. N Okada*, H
Shiga, H Sakurai, T Hasebe, M Noda (Iwate Medical University, Japan).
112.
Effect of Saliva Contamination on Bond Strengths of Universal Adhesives.
J. Zuffa*, H. Shen, L. Chen, B.I. Suh* (Bisco Inc, USA).
113.
Dentin Bond Strength of Universal Adhesives with Dual-cure Cements L.
Chen*, B.I. Suh (Bisco Inc, USA).
114.
Bond strength and contact angle of experimental infiltrating materials H.
Quiles*, A.B. Correr, T.G. Araujo,M.A.C. Sinhoreti,L.C. Sobrinho (Piracicaba Dental
School - State University of Campinas, Piracicaba, Brazil).
115.
Bonding effectiveness of universal self-etching adhesive systems to
chlorhexidine-treated dentin L. A. Salvio* 1, Andrade CO 1, Resende FO 1, De
Goes MF 2 (1 Federal University of Juiz De Fora, BRA, 2 Piracicaba Dental School,
13
BRA).
116.
Challenging the efficacy of different dental bleaching protocols. A.
Koniaris* 1, V. Margaritis 2, M. Antoniadou 1, A. Kakaboura 1 (1 University of
Athens, Dental School of Athens, Greece, 2 College of Health Sciences, Walden
University, USA).
117.
Heat treatment during setting on properties of resin-based provisionalrestorative materials. C.H.Chu*, M.L.Mei (Faculty of Dentistry, University of Hong
Kong, Hong Kong, China).
118.
Polymerization Shrinkage-Stress Kinetics of Resin-Composites. H. AlSunbul1,2*, N. Silikas1, D.C. Watts1(1 School of Dentistry, University of
Manchester, UK ,2 College of Dentistry, King Saud University, Riyadh, Saudi
Arabia).
119.
Efect Of Fiberglass Post-Customization on the Properties of Adhesive
Interface. P.H. Dos Santos* 1, A.G.L. Godas 1, T.Y.U. Suzuki 1, J. Gallego 1, J.E.
Gomes-Filho 1, W.G. Assunção 1, S. Pavan 2, A.L.F. Briso 1 (1 - São Paulo State
University - UNESP, Brazil, 2 - FAI University, Brazil).
120.
Structural and mechanical properties of IPN FRC posts. T. Peltola* 1, E.
Säilynoja 1, PK Vallittu 2, LV. Lassila 2 (1 Stick Tech Ltd., Finland, 2 Institute of
Dentistry and Turku Clinical Biomaterials Centre – TCBC, University of Turku,
Finland).
121.
Push-out test modification for bond strength evaluation of root-end
sealers. Y.T.C. Silva-Sousa1*, J.H.S. Marques1; F.J.A. Rached-Júnior1, J.F.B.
Bruniera1, C.E.S. Miranda1, M.D.Sousa-Neto2 (1. University of Ribeirão Preto UNAERP, Ribeirão Preto, SP, Brazil, 2. University of São Paulo - USP, Ribeirão
Preto, SP, Brazil).
122.
Fiber orientation in FRC restorations filled in bulk or layers. A. Van Ende*
1, B.C. Barreto 1, D.P. Lise 1, G. Pyka 1, G. Kerckhofs 1, M. Wevers 1, B. Van
Meerbeek 1 (1 KU Leuven BIOMAT, Department of Oral Health Sciences, KU
Leuven (University of Leuven) & Dentistry, University Hospitals Leuven, Leuven,
Belgium).
123.
Bond strength of epoxy resin and methacrylate-based sealers to dentin.
M.D. Sousa-Neto* 1, M. Brito-Júnior 1, G.B. Leoni 1, R.D. Pereira 1, J.F.M. Chaves
1, Y.T.C. Silva-Sousa 2 (1 University of Sao Paulo, Brazil, 2 University of Ribeirao
Preto, Brazil).
124.
Solubility and desintegration of root canal sealers. V.L.C. Araújo*1, J.F.M.
Chaves1, F.J.A. Rached-Junior2, Y.T.C. Silva-Sousa2, J.R. Carvalho-Junior3, M.D.
Sousa-Neto1 (1 University of São Paulo, Brazil, 2 University of Ribeirão Preto,
Brazil, 3 University of Brasília, Brazil).
125.
Influence of fluorescent agents on physicochemical properties of resin
sealer. F.J.A. Rached-Júnior*, M.A.L. Ferraz, L.M. Macedo, C.S. Miranda, Y.T.C.
Silva-Sousa (University of Ribeirão Preto, School of Dentistry, Ribeirão Preto, SP,
Brazil).
126.
Physicochemical properties of epoxy resin-based root canal sealers. G.B.
14
Leoni*1, J.F.M. Chaves1, B.M. Crozeta1, V.L.C. Araújo1, R.P.F. Rosa1, F.J.A. RachedJunior2, Y.T.C. Silva-Sousa2, M.D. Sousa-Neto1 (1 University of Sao Paulo, Brazil, 2
University of Ribeirao Preto, Brazil).
127.
Flexural strength of bis-acrylic resin reinforced with experimental nylon
fiber. T. J. A. Paes-Junior*, Yamada H., Almeida C.S., Tango R.N., Gonçalves F.C.P.
(UNESP - Univ Estadual Paulista, Brazil).
128.
Preparation and characterization of radio-opaque E-glass fiber reinforced
composite. J He*1,2,3, LV. Lassila1,2, PK. Vallittu1,2 (1 Department of
Biomaterials Science, Institute of Dentistry and Biocity Turku Biomaterials
Research Program, University of Turku, Turku, Finland, 2 Turku Clinical
Biomaterials Centre - TCBC, University of Turku, Turku, Finland, 3 College of
Materials Science and Engineering, South China University of Technology,
Guangzhou, China).
129.
Plasma effects on bond strenght and micromorphology of resin-dentin
interface. A.P.A. Ayres * 1, F.D. Nascimento 2, B.B. Lopes 3, G.M.B. Ambrosano 1,
M. Giannini 1 (1 Piracicaba Dental School, State University of Campinas, Brazil, 2
Biomaterials Research Group, Anhanguera University, Brazil, 3 Surface Engineering and Plasma Solution, Brazil).
130.
Microtensile bond strength of Diode LASER irradiated self-etch adhesives.
R.M. Maenosono* 1, L.F.F. Brianezzi 1, A.R.C.G. Góes 1, F.A.P. Rizzante 1, L. Wang
1, H.M. Honório 1, R.G. Palma-Dibb 2, L. Bachmann 2, R.F.L. Mondelli 1, S.K.
Ishikiriama 1 (1 University of São Paulo, Department of Operative Dentistry,
Endodontics and Dental Materials, Bauru, Brazil, 2 University of São Paulo,
Department of Operative Dentistry, Ribeirão Preto, Brazil).
131.
Influence of matrix composition in ultra-fast light curing dental
composites. L.D. Randolph* , J.Y. Beauquis , G. Leloup , J.G. Leprince (Université
Catholique De Louvain, Belgium).
132.
Effect of EDC on the interface of a self-etch adhesive. V. Angeloni* 1, A.
Mazzoni 1, M. Cadenaro 1, S. Santi 2, M. Falconi 3, R. Di Lenarda 1, F.R. Tay 4, D.H.
Pashley 4, L. Breschi 3 (1 University of Trieste, Trieste, Italy; 2 National Research
Council (CNR), Institute of Molecular Genetics (IGM)-Bologna and Laboratory of
Muscoloskeletal Cell Biology, IOR, Bologna, Italy; 3 DIBINEM University of
Bologna, Bologna, Italy, 4 Medical College of Georgia, Augusta, USA.)
133.
Roughness and microhardness of a composite after surface sealants
application. RC De Ré Silveira*, V.C Ruschel, H.P Maia, L.N Baratieri, G.M Arcari
(Federal University of Santa Catarina, Department of Dentistry, Florianópolis,
Brazil).
134.
Carbon fiber reinforced polymers veneered by composites: a microleakage
test. G. Merlati*, M. Bossi, T. Lucco Castello, P. Menghini (University of Pavia,
Italy).
135.
Light source influences degree of conversion of dual-curing luting
composites. F. Bassi*, S. Brazzoli , G. Ciampalini, P. Acquaviva, A. Cerutti
(University of Brescia, Brescia, Italy).
15
136.
Conversion Degree and Push-out Bond Strength of Two Dual-Composite
Cements. E. Nembrini*, P. Acquaviva, A. Preti, F. Bassi, A. Cerutti (University of
Brescia, Italy).
137.
Influence of thermal mechanical cycling on properties of modified resin.
F.C.P. Goncalves* 1, V.C.Macedo 1, H.L.De Castro 1, T.J.A.Paes Junior (UNESP Univ Estadual Paulista, Brazil).
138.
Surface Roughness of Indirect Resin Composites after Chewing Simulation.
L.L. Arashiro*, L.H. Silva, , E. Lima, M.C.H.C.A. Villaça, W.G. Miranda, P.F. Cesar
(University of São Paulo, Department of Oral Biology and Biomaterials, São Paulo,
Brazil).
139.
Color stability of restorative materials after immersion in different
solutions. MC Villaca*, L.L Arashiro, E Lima, L Hian, F.A Pereira, W.G Miranda Jr,
P.F Cesar (University of São Paulo, São Paulo, Brazil).
140.
Thermocycling Effects on Bond Strength of Two Dual-Curing Composites.
Bozzoli C.*, Nembrini E., Madini L., Barabanti N., Cerutti A. (Università Di Brescia,
Italia).
141.
Effect of different surface treatments on resin-bonding to hybrid material.
F Campos* 1, CS Almeida 1, Rippe MP 2, RM Melo 1, LF Valandro 2, MA Bottino 1
(1 Univ Estadual Paulista, Institute of Science and Technology, Brasil, 2 Federal
University of Santa Maria, Brazil).
142.
Macrostructural Evaluation of a New Self-Etching Composite-Dentine
Interface. Madini L.*, Preti A., Mondina P., Barabanti N., Cerutti A. (University of
Brescia, Italy).
143.
Influence of thermo-curing on the flexural strength of GIC. K. Gorseta* 1,
T. Skrinjaric 1, L. Gavic 2, D. Glavina 1 (1 University of Zagreb, Croatia, 2
University of Split, Croatia).
144.
Irradiance~distance, beam uniformity, & heat generation of seven LED
lights. H. Lu* 1, F. Pfefferkorn 2, C. Felix 3, and C. Deacon 3, (1 DENTSPLY/Caulk,
Milford, DE, USA; 2 DENTSPLY/Detrey, Konstanz, Germany; 3 Bluelight Analytics
Inc., Halifax, NS, Canada).
145.
Degree of Conversion and Knoop Microhardness of a Silorane composite.
A. Nishida *, MB Araújo, LC Yamasaki, TG Carnaval, CE Francci (University of São
Paulo, Brazil).
146.
Esthetic Assessment on Nanoparticles Modified Adhesive used for OCT
Investigation. C. Krems* 1, A.C. Cojocariu 1, C. Sinescu 1, S.I. Stratul 1, M.L.
Negrutiu 1, C.A. Podariu 1, A. Gh Podoleanu 2 (1 University of Medicine and
Pharmacy “Victor Babes” Timisoara,Romania, 2 School of Physical Sciences,
Ingram Building, University of Kent, UK).
147.
DC and MH of a dual-cement under Disilicate and Composite. A. Comba
*1,M. Cadenaro 2, L. Breschi 2, E. Berutti 1, C. Monaco 2, R. Scotti 2, N. Scotti 1 (1
University of Turin, Department of Surgical Sciences, Dental School; 2 University
of Trieste, Department of Medical Science; 3 Alma Mater Studiorum, University of
Bologna, DIBINEM).
16
148.
Preparation of Metal Organic Frameworks for reinforcement of glassionomer restoratives. K.D. Byrne*1, 2, W.S. Schmitt2, G.J.P. Fleming1. (1Dublin
Dental University Hospital, School of Dental Science, 2School of Chemistry,
Trinity College Dublin, Ireland).
149.
Evaluation of bond strength to enamel bovine teeth whitened. C.
Deucher*, E. Araújo, H.P. Maia, C.P. Gré, V.C. Ruschel, C.G. Savi. (Universidade
Federal De Santa Catarina, Department of Dentistry, Florianópolis, Brazil).
150.
Chemical-physical Properties of Pure Dicalcium Silicate, Tricalcium
Silicate and MM-MTA. M.G. Gandolfi, F. Siboni*, C. Prati (Department of
Biomedical and Neuromotor Sciences, University of Bologna, Italy).
151.
MTA cement exposed to acidic environment: surface and internal
microhardness. D. Angerame, M. De Biasi, A. Franzò* (University of Trieste,
Italy).
152.
Surface roughness/gloss of a resin composite using different polishing
procedures. A. Catellani*, G. Orsini, G. Mengoni, S. Corda, S. Sparabombe, M.
Procaccini, A. Putignano (University of Ancona, Italy).
153.
Innovative self-etching dental adhesives formulated using reactive
nanogel additives. S. Sauro* 1, J.W. Stansbury 2, L. Cumia 3, T.F. Watson 4 (1
Universidad CEU-Cardenal Herrera, Valencia, Spain, 2 King’S College London
Dental Institute, London, UK, 3 University of Varese, Varese, Italy, 4 University of
Colorado, Denver, USA).
154.
Marginal adaptation of bulk filled dual cured composites. P Sedlakova*, T
Bortolotto, I Krejci (University of Geneva, Division of Cariology and
Endodontology, Geneva, Switzerland).
155.
Thio-Urethane Oligomers Reduce Polymerization Stress in Highly Filled
Dental Composites. A. Dobson 1, A. Bacchi 2, C. S. Pfeifer* 1 (1 School of
Dentistry, Oregon Health & Science University, Portland, OR, USA; 2 School of
Dentistry, UNICAMP, Piracicaba, SP, Brazil).
156.
Different shades and curing modes of dual-cure resin cements.
V.Bosquiroli*1, D C R S. De Oliveira2, R M. Puppin-Rontani2, E J C. De Souza
Junior2, W C. Brandt2 E M a C. Sinhoreti2 (1Unioeste Cascavel, PR Brazil, 2FOP
Unicamp, Piracicaba SP Brazil).
157.
Long-term tensile bond strength of fiber post to root dentin. A.S.
Iwamoto* 1, R.M. Puppin-Rontani 1, F.M. Pascon 1 (1 University of Campinas,
Piracicaba Dental School, Pediatric Dentistry Department, Piracicaba, Brazil).
158.
Experimental resin materials pre-heating in enamel caries infiltration:
properties evaluation. L.A. Gaglianone*1, C.S. Pfeifer2, R.M. Puppin-Rontani3,
G.M. Marchi1 (1 State University of Campinas, Department of Restorative
Dentistry, Piracicaba/BR, 2 Oregon Health and Science University, Biomaterials
and Biomechanics, Portland/USA, 3State University of Campinas, Department of
Pediatric Dentistry, Piracicaba/BR).
159.
Roughness of packable and flowable nanofilled composites polished with
pastes. D. Angerame, M. De Biasi*, A. Franzò (University of Trieste, Italy).
17
160.
Wear of polyetherketoneketone (PEKK) caused by different antagonists. T.
Kewekordes 1, S. Wille* 1, M. Kern 1 (1 CAU Kiel, Department of Prosthodontics,
Propaedeutics and Dental Materials, Kiel, Germany).
161.
Properties of One Modified Composite Resin by TiO2 Nanoparticles. AN
De Souza Rastelli* 1, HB Dias 1, MIB Bernardi 2, JRC Saad 1, CW De Souza 3, ÂCC
Zuanon 1, AC Hernandes 2 (1 University of Sao Paulo State-UNESP, 2 University
of Sao Paulo-USP, 3 Federal University of Sao Carlos - Ufscar, Brazil).
162.
A discriminatory mechanical testing performance indicator for handmixed glass-ionomer restoratives. M.S. Baig*, A.H. Dowling, G.J.P. Fleming.
(Dublin Dental University Hospital, School of Dental Science, Trinity College
Dublin, Ireland).
163.
Effect preparation on the hybrid layer with resin cement. B. Vascvoncellos,
M. Pereira Rodrigues, L. A. Cyrillo Cerqueira De Oliveira, G. A. Borges* (Uberaba
University,Brazil), E. Miyashita (Paulista University, Brazil), A. R. Costa Correr, L.
Correr-Sobrinho (University of Campinas, Brazil).
164.
Luting protocol affects the bond strength of glass fiber posts. M. Borba* 1,
F.S. Grecca 2, B. Mazzoneto 1 (1University of Passo Fundo, Brazil, 2 Federal
University From Rio Grande Do Sul, Brazil).
165.
Mechanical properties of an experimental adhesive containing inhibitors
of metalloproteinases. C.U.F.S. Rodrigues, M.P.O. Matos, T.R. De Carvalho, A.
Penelas*, E.M. Silva, C.M. Amaral (Federal Fluminense University, School of
Dentistry, Niterói, Brazil).
166.
Mechanical properties of Fiber-reinforced composites and stainless steel
retainers. A. Lucchese 1,2, V. Butera* 1,2, G. Gastaldi 3, E. Gherlone 1 (1 Unit of
Dentistry, IRCCS San Raffaele Scientific Institute, Milano Italy, 2 Department of
Orthodontics, Vita E Salute San Raffaele University, Milano Italy, 3 School of
Dentistry, University Of Brescia, Italy).
167.
Effect of tetracalcium phosphate on bond strength of self-etch adhesives.
M. Cuppari *, Chiapello M, Alovisi M, Pasqualini D, Berutti E, Scotti N (University
of Bologna, Italy).
168.
Management of NCCLs with different restorative techniques - Stress-Strain
Analysis. P.V. Soares* 1, A.C. Machado 1, L.H.A. Raposo 1, A.B. Aredes 1, B.R. Reis
1, A.K. Bedran-Russo 2, C.J. Soares 1 (1 Federal University of Uberlandia, 2
University of Illinois Chicago, USA).
169.
Effect of Synthetic Hydroxyapatite in Improving Fiber Posts Bond
Strength. E. Bergantin 1*, G. Turco 2, M. Cadenaro 2, L. Breschi 3, E. Berutti 1, N.
Scotti 1 (1 University of Turin, Department of Surgical Sciences, Dental School. 2
University of Trieste, Department of Medical Sciences. 3 Alma Mater Studiorum,
University of Bologna, DIBINEM.)
170.
Physical Reinforcement of Polymeric Networks Associated with Urethane
Dimethacrylates. K. Sarao, S.H. Lewis, M.D. Barros, J.W. Stansbury* (University of
Colorado School of Dental Medicine, Aurora, Colorado, USA).
171.
Effect of Moist/Dry/Desiccated Dentin on Shear-Bond Strength of
18
Universal Adhesives. S. Singhal, S.A. Antonson and D.E. Antonson*, P. Bush.
(University at Buffalo, Department of Restorative Dentistry, Buffalo, NY, USA).
172.
Resin infiltration into dental enamel nanopores via electrokinetic flow.
H.L. Carlo* 1, P.P. Maciel 1, F.G. Carvalho, F.B. Sousa (1 Federal University of
Paraiba, School of Dentistry, Joao Pessoa, Brazil).
173.
Alternative-Photoinitiators: Effect on shrinkage-stress and degree of
conversion. R. Alonso 1 *, F. B. Piveta-Flores 1, M. S. Silva 1, D. Silva 1, R. E. M.
Novaes 1, P. M. C. Scaffa 1, P.H.P. D’Alpino 1, V. Hipólito 1, C. Anauate-Netto 1 (1
Anhanguera University of São Paulo - UNIAN.
174.
Alternative acid-functional monomer and its pH influence on the enamel.
A.F. Da Silva*, E.A. Münchow, M. Barbosa, G.S. Lima, F.A. Ogliari, E. Piv (Federal
University of Pelotas, BR).
175.
Polymerization of Self-etching Resin-Cements: Effect of Storage Time and
Light-Curing-Technique. B. Dimarco 1; C. Solomon 2; R. França*1. (1- Dental
Biomaterials Research Laboratory, Department of Restorative Dentistry, Faculty
of Dentistry, University of Manitoba – Winnipeg, Canada 2- Prosthodontics
Division, Department of Restorative Dentistry, Faculty of Dentistry, University of
Manitoba – Winnipeg, Canada).
176.
µTBS of pre-treated demineralized dentin and a self-etching adhesive
system. R.M. Puppin-Rontani*, L.F. Martins, J Puppin-Rontani (University of
Campinas, BR).
177.
µTBS of a etch&rinse adhesive system to pre-treated demineralized
dentin. J. Puppin-Rontani*, L.F. Martins, R.M. Puppin-Rontani (University of
Campinas, BR).
178.
Effect of shelf-life on bond strength of self-etching adhesives systems. E.
Piva* 1, A.S. Cardoso 2, H.L. Oliveira 1, N.L.V. Carreño 1, A. Gonini Jr. 2 (1 Federal
University of Pelotas, BR, 2 University of North Paraná, BR).
179.
Micro-tensile bond strength of ‘universal’ adhesives to dentin. T. Washino,
B.C.F. Barreto*, A. Van Ende, J. De Munck, B. Van Meerbeek. (KU Leuven BIOMAT,
Department of Oral Health Sciences, University of Leuven & Dentistry, University
Hospitals Leuven, Leuven, Belgium).
19
Session 3 Clinical Properties/Clinical relevance (Friday 10th, October, 11 am).
180.
Two-year prospective clinical study of posterior CAD-CAM cobaltchromium single crowns. R. Leone*, F. Zarone, P. Piombino, R. Sorrentino.
(University "Federico II" of Naples, Naples, Italy).
181.
Inlay-retained zirconia-based fixed partial dentures: a 5-years
review. C. Monaco 1, D. Lodi Giuliani 1*, A. Arena 1, R. Scotti 1 (1 Alma
Mater Studiorum, University of Bologna, Bologna, Italy).
182.
Biocompatibility of glass ionomer cements applied in deep cavities.
D.G. Soares* 1; F. G. Basso 1; N.T. Sacono 2; A.P.D. Ribeiro 3; J. Hebling 1;
C. A. De Souza Costa 1 (1 Araraquara School of Dentistry, Univ. Estadual
Paulista, Brazil; Federal University of Goiás, Brazil; University of Brazilia,
Brazil)
183.
Antimicrobial-peptide coating that ruptures the wall of Gram
positive bacteria. Xi Chen, Helmut Hirt,Yuping Li,Sven-Ulrik Gorr,
Conrado Aparicio* (Minnesota Dental Research Center for Biomaterials
and Biomechanics, University of Minnesota School of Dentistry,
Minneapolis, USA,).
184.
MIH Supplementation Strategies. C Baroni* 1, MG Bazzocchi1, S
Marchionni1, R Bedini2, R Pecci2, DJ Manton3 (1 University of Bologna,
Italy, 2 Instituto Superiore Di Sanità,Roma, Italy , 3 University of
Melbourne, Australia).
185.
Usage of nanotechnology for the super lubrication of orthodontic
wires C.C Lombardi *1, A. Gracco 2, L. Siviero 3, F. Deflorian 4, C. Zanella
5, G. Siciliani 6, G. Bonetti 7 (1 University of Ferrara, Italy, 2 University of
Padova, Italy, 3 University of Ferrara, Italy, 4 University of Trento, Italy, 5
University of Trento, Italy, 6 University of Ferrara, Italy, 7 University of
Bologna, Italy)
186.
Mechanical Behaviors of Class II Composite Restorations under
Cyclic Loading S.F. Chuang*, X.F. Hong, T.Y.F. Chen (National Cheng Kung
University, Tainan, Taiwan).
187.
Two-year prospective clinical study of posterior CAD-CAM cobaltchromium single crowns R. Leone*, F. Zarone, P. Piombino, R. Sorrentino.
(University "Federico II" of Naples, Naples, Italy).
188.
Efficacy of Clinical Trial Management F. Fazzi*, R.Lorenzi , G.Dondi
Dall'orologio (University of Bologna, Italy).
189.
Connexin 43 is required for topography-mediated osteoblastic
differentiation on titanium E. Manfredi, A. Toffoli*, C. Galli, S. Lumetti, G.
Ghiacci, G.M. Macaluso, A. Di Blasio, M. Bonanini (Dep. Biomedical,
Biotechnological and Translational Sciences, University of Parma, Parma,
Italy)
190.
Piezosurgery in the Preservation of Post-extractive sites. B.
Musante*, P.Pera, M. Menini, D. Baldi (University of Genoa)
20
191.
Osteoinductive properties Study of collagenated Dual-blocks by
synchrotron radiation phase-contrast. A. Giuliani 1*, S. Mazzoni 1, A.
Manescu 1, S. Mohammadi 2, G. Tromba 2, F. Diomede 3, A. Piattelli 3, O.
Trubiani 3 (1 Università Politecnica Delle Marche, Ancona, Italy, 2
Sincrotrone Trieste S.C.P.A, Trieste, Italy, 3 Laboratory of Stem Cells and
Regenerative Medicine, University of Chieti-Pescara, Department of
Medical, Oral and Biotecnological Sciences, Chieti, Italy).
192.
Blocks of autogenous bone versus xenografts: a randomised
controlled trial. C. Barausse* 1, L. Checchi 1, M. Esposito 2, R. Pistilli 3, M.
Baffone 1, V. Checchi 4, P. Felice 1 (1 University of Bologna, Department of
Periodontology and Implantology, Bologna, Italy; 2 University of
Göteborg, Department of Biomaterials, Goteborg, Sweden; 3 San Filippo
Neri Hospital, Oral and Maxillo-Facial Unit, Rome, Italy; 4 University of
Trieste, Department of Medical Sciences, Trieste, Italy)
193.
Guided Inlay Technique: novel surgical approach in a posterior
mandible. M. Baffone* 1, R. Pistilli 2, C. Barausse 1, V. Checchi 3, P. Felice
1 (1 University of Bologna, Department of Periodontology and
Implantology, Bologna, Italy; 2 San Filippo Neri Hospital, Oral and
Maxillo-Facial Unit, Rome, Italy; 3 University of Trieste, Department of
Medical Sciences, Trieste, Italy).
194.
Susceptible genotypes to periodontitis and clinical outcomes: a
systematic review. G.S. Chatzopoulos* 1, A.E. Doufexi 2 (1: Aristotle
University of Thessaloniki, Greece, 2: Private Practice Limited to
Periodontology and Implant Dentistry).
195.
Invasive cervical resorption: a case series with three-year followup. F. Lipari*, G. Lo Giudice, G. Iannello, A. Lizio, R. Lo Giudice. (University
of Messina, Department of Med. Chir. Spec. Odont. Exper. Sc., Messina,
Italy).
196.
Formulation and characterization of triple antibiotic hydrogels for
endodontic disinfection S. Pérez-Padilla 1, D. Chavarría-Bolaños* 2-3,
B.I. Cerda-Cristerna 3, J. Vega-Baudrit4, A. Pozos-Guillén 3 (1 Pediatric
Dentistry Postgraduate Program. Faculty of Dentistry, San Luis Potosí
University. México. 2 Surgical and Diagnostic Sciences Department,
Faculty of Dentistry, University of Costa Rica, Costa Rica.3 Basic Sciences
Laboratory, Faculty of Dentistry, San Luis Potosí University, México.4
National Laboratory of Nanotechnology. San José, Costa Rica).
197.
Anti-bacterial/fungal efficacy and genotoxicity of two tripleantibiotics hydrogels for endodontics. M.F. Romo-Contreras 1, R.M.
Martínez-Compeán 1, D. Chavarría-Bolaños 2, L.O. Sánchez-Vargas 2, D.M.
Escobar-García 2, A. Pozos-Guillén 2, B.I. Cerda-Cristerna* 2. (1 Pediatric
Dentistry Postgraduate Program. Faculty of Dentistry, Autonomous
University of San Luis Potosí, SLP, Mexico. 2 Laboratory of Basic Sciences,
21
Faculty of Dentistry, Autonomous University of San Luis Potosí,
SLP,Mexico).
198.
Repeatability of dental impressions: direct vs. indirect
digitalization. E. Evangelisti*, C. Monaco, N. Ragazzini, A. Llukacej, P.
Baldissara, R. Scotti (University of Bologna, Division of Prosthodontics
and Maxillo-Facial Rehabilitation - DIBINEM, Bologna, Italy).
199.
Post-operative sensitivity of a universal adhesive system in
posterior restorations. K.C.S. Modena 1,2, L. Wang 1, M.A.S. Agulhari 1, T.L.
Bueno 1, S.K. Ishikiriama 1, M.T. Atta*,1 (1 University of São Paulo, Bauru
School of Dentistry, 2 University of Sacred Heart).
200.
RetroMTA, OrthoMTA, and ProRootMTA for pulpotomy in primary
molars. SH. Kim 1, CM. Kang 1, YS. Shin 2, JH. Lee 1, JS. Song*1 (1 Yonsei
University, Department of Pediatric Dentistry, Seoul, South Korea, 2
Yonsei University, Department of Conservative Dentistry, Seoul, South
Korea).
201.
Evaluation of Reline II System. Y.Kaminosono*, H.Nakaseko,
Y.Shinozaki, H.Kamohara, T.Kumagai (GC Corporation,R&D Center,Japan).
202.
Hybrid scaffolds to improve implant stability: micro-CT and
histological analysis. R. Sorrentino*1,2, R. Aversa1, S. Russo3, E.F.
Gherlone3, F. Zarone2, A. Apicella1 (1: Second University of Naples, Italy,
2: University “Federico II” of Naples, Italy 3: University “Vita Salute San
Raffaele” of Milan, Italy).
203.
Influence of the tooth-polishing pastes on whitening to effects.
S.Hoshikawa, I. Nakanishi*, D.Kita, I.Okada, A.Ishikawa (The Nippon
Dental University Hospital, Japan).
204.
Permanent mucosal discoloration correlated to magnesiumenriched hydroxyapatite: a case report. M. Montevecchi*, G. Marucci, A.
Dorigo, L. Checchi (Dibinem, University of Bologna - Alma Mater
Studiorum, IT).
205.
One-year follow-up clinical effectiveness of non-vital tooth
bleaching techniques. D.P. Lise* 1, G. Siedschlag 1, J.K. Bernardon 1, L.N.
Baratieri 1, M.A.C. Andrada 1, C.P. Gré 1, C. Gutierrez 1, C.M. Velho 1, T.Y.U.
Suzuki 2, A. Van Ende 3 (1 Federal University of Santa Catarina, Brazil, 2
Sao Paulo State University, Brazil, 3 KU Leuven, Belgium).
206.
The Effect of Investment Materials on the Fitting Accuracy. T. Krell
*,F.-J. Faber, H. C. Roggendorf (University of Cologne, School of Dental and
Oral Medicine, Cologne, Germany).
207.
Accuracy of different dental implant impression techniques
comparing different materials. F. Pera, M. Bevilacqua, M. Menini,
L.Giuliano, M. Calosso*, P. Pesce, P. Pera (University of Genoa,
Department of Prosthodontics (DISC), Genoa, Italy).
208.
Root filling bond strength using single-cone technique with
different sealers. B.M. Crozeta*, J.F.M. Chaves, C.C. Camilo, M. Brito-
22
Júnior, R.D. Pereira, A.M. Cruz-Filho, M.D. Sousa-Neto (University of Sao
Paulo, Brazil).
209.
Orthodontic loading influence on root resorption susceptibility:
finite element analysis. M.G. Roscoe* 1, J.B.C. Meira 1, M. Dalstra 2, P.M.
Cattaneo 2 (1 University of Sao Paulo, Biomaterials and Oral Biology
Department, Sao Paulo, Brazil, 2 Aarhus University, Department of
Orthodontics, Aarhus, Denmark).
210.
Wear behaviour of monolithic zirconia crowns – clinical results. T.
Stober* 1, J.L. Bermejo 2, S. Rues 1, P. Rammelsberg 1, M. Schmitter 1 (1
Department of Prosthodontics, University Hospital Heidelberg, Germany,
2 Institute of Medical Biometry and Informatics, University Hospital
Heidelberg, Germany).
211.
12-months clinical evaluation of composite restorations in
smoking patients. L.D Carvalho*, G.C Lopes1, R.G. Machado1, (*Phd
Student, MS, DDS, Department of Operative Dentistry, Federal University
of Santa Catarina, Florianópolis, Brazil. ,1Professor, Department of
Operative Dentistry, Federal University of Santa Catarina, Florianópolis,
Brazil).
212.
Development of a radiopaque infiltration resin for early carious
lesion. M.Moeinian*. R Hill, F. Wong. (Dental Physical Science, Queen
Mary University of London, London, UK).
213.
Randomized controlled trial of sealed in-office bleaching
effectiveness. F.P.S Nahsan* 1, M.A.P Santana 1, A. D. Loguercio 2, A.L.
Faria-E-Silva 1. (1 Federal University of Sergipe, Brazil, 2 Bauru School of
Dentistry, University of Sao Paulo, Brazil).
214.
Cervical margin finishing in class II cavities: four different
methods. G. Ciampalini*, C. Bozzoli, G. Mabellini, D. Don, P. Mondina, A.
Cerutti (Dept. of Restorative Dentistry, University of Brescia, Brescia,
Italy).
215.
Efficacy of a chlorhexidine gauze for oral hygiene: randomized
trial. G. Orsini*, S. Sparabombe, A. Catellani, M. Grossi, M. Roncati, M.
Procaccini, A. Putignano (Polytechnic University of Marche, Ancona, Italy).
216.
Assessing appearance in human dental color space . Brazzoli*, G.
Ciampalini, D. Don, E. Nembrini, A. Cerutti (University of Brescia, Dept.
Restorative Dentistry).
217.
Postoperative sensitivity: 1-year randomized clinical trial.
M.H.S.Souza* 1, K.G.K.Carneiro 2, J.F.Araujo 2, M.F.Lobato 1, T.A.F.Barros
1, M.F.Braga 1, S.C.Loretto 1, P.A.R.S.Souza1 (1 Federal University of Pará,
Brazil, 2 Federal University of Maranhão, Brazil).
218.
Innovative Light-Curable Calcium Phosphate Cements as
Retrograde Filling Material. A. Abedi-Amin* 1, A. Darvizeh 1, A. Luzi 1, R.
Mongiorgi 2, S. Sauro 1 (1 Universidad CEU-Cardenal Herrera, Valencia,
Spain, 2 Alma Mater Studiorum, University of Bologna, Bologna, Italy).
23
219.
Air-polishing with glycine and bicarbonate powders on restorative
materials. C. G. Sartori *, F. Murillo-Gómez, A. B. Soares, M. F. De Goes
(University of Campinas, Brazil).
220.
PLLA with Metronidazole or Amoxicillin - Alternative to Systemic
Antibiotics. T.G. Carnaval*, C.A. Adde, M.M Romano, F. Gonçalves, G.C.
Santos, L.H. Catalani, V.E.Arana-Chavez, I.P. Tortamano, M.S. Soares
(University of São Paulo, Brazil).
221.
Inlay and allograft block in atrophied posterior mandible: case
series. V Checchi 1*, A. Mazzoni 1, M. Falconi 2, L. Manzoli 2, L. Breschi 2,
P. Felice 2 (1 University of Trieste, Department of Medical Sciences,
Trieste, Italy; 2 University of Bologna, Department of Biomedical and
Neuromotor Sciences, Bologna, Italy).
222.
Overdenture-bars casted in different metals: Adaptation and stress
distribution. MBF Dos Santos * 1 L. Correr-Sobrinho 2 A. Bacchi 3 R. A.
Caldas 3 B. M. Zen 3 (1 - Restorative Dentistry Department, School of
Dentistry, Federal University of Pelotas, Pelotas, RS, Brazil 2 - Dental
Materials, Piracicaba Dental School, University of Campinas, Piracicaba,
SP, Brazil 3 - Prosthesis and Periodontics, Piracicaba Dental School,
University of Campinas, Piracicaba, SP, Brazil).
223.
Luting protocols influence of lithium disilicate ceramic fracture
strength. R.F. Carvalho 1, C. Cotes 1, F.P.P Leite 2; T.J.A. Paes-Junior 1, E.
Kimpara* 1 (1 UNESP - Univ Estadual Paulista, BR, 2 Universidade
Federal De Juiz De Fora, BR).
224.
Clinical evaluation of composite color change in Class IV
restorations. V.C. Ruschel*, M.V. Martins, J.K. Bernardon, H.P. Maia, S.
Monteiro-Júnior (Federal University of Santa Catarina, Brazil).
225.
Color stability analysis of polycrystalline and monocrystalline
ceramic bracket. C.B. Oliveira 1, P.P. Schneider* 1, L.H.K. Shintcovsk 1,
A.S. Pinto 1, D.B. Ravelli 1, L.P. Martins 1, L.P. Sampaio 1, L.G. Gandini-Jr 1
(1 UNESP- Univ Estadual Paulista, Orthodontic Department, Araraquara,
Brazil).
226.
Protection of enamel-glass ionomer restorative margins by resincoatings. Y.Hokii*, R.Yoshimitsu, K.Yamamoto, S.Fukushima, F.Fusejima,
T.Kumagai(R&D Dept., GC Corporation, Japan).
227.
Ice-templated Calcium Silicate Scaffolds for Dental and
Maxillofacial Surgery. M.G. Gandolfi *1,2, A. Tomsia 2, C. Prati 1 (1
Department of Biomedical and Neuromotor Sciences, University of
Bologna, Bologna, Italy; 2 Materials Sciences Division, Lawrence Berkeley
National Laboratory, Berkeley, CA, USA).
228.
Survival and Success rate after 2 years of Primaconnex Implant. C.
Prati 1, F. Zamparini* 1, A. Buonavoglia 1, A. Ciulla 1, M.G. Gandolfi 1 (1
Department of DIBINEM, Endodontic Dental Section, ALMA MATER
Studiorum, University of Bologna, ITALY).
24
229.
Zirconia based vs metal-ceramic single posterior crowns: a 5-year
RCT. A. Llukacej *, C. Monaco, N. Ragazzini, E. Evangelisti, R. Scotti
(University of Bologna, Department of Biomedical and Motor
Neuroscience. Bologna, Italy).
230.
Cell viability of starch-based hydrogels for maxillofacial bone
regeneration. J.C Flores-Arriaga* 1, BI. Cerda-Cristerna 1, D.M EscobarGarcía 1, V. Escobar-Barrios 2, A.J. Pozos-Guillen 1 (1 Laboratory of Basic
Science, Faculty of Dentistry, Autonomous University of San Luis Potosi,
Mexico, 2 Laboratory of Advanced Polymers, (IPICYT), San Luis Potosí,
Mexico).
231.
Microbiological characterization of class V restorations. D. Don*, P.
Mondina, F. Bassi, L. Madini, A. Cerutti. (Università Degli Studi Di Brescia,
Italy).
232.
Biomechanical behavior of anterior teeth restored with ceramic
veneers. C. Bergoli*1, M.A. Bottino2, J.B.C. Meira3, L.F. Valandro4 (1
Federal University of Pelotas, BRA, 2 Science and Technology Institute,
BRA,3 São Paulo State University, BRA,4 Federal University of Santa
Maria, BR).
233.
Preparation design effects and ceramic type on biomechanical of
CAD-CAM. A.A. Bicalho*, A.L.S.V. Vianna, R.A.S Pereira, F.D. Neves, C.J.
Soares, C.J. Prado (University of Uberlandia, Brazil).
234.
Effect of materials on cuspal strain and stress in endodonticallytreated-molars. C.J. Soares* 1, R.A.S Pereira 1, A.A. Bicalho 1, S.D. Franco
1, D. Tantbirojn 2, A. Versluis 2 (1 University of Uberlandia, Brazil, 2
University of Tennessee Health Science Center, USA).
235.
Clinical evaluation of multiple-surface ART restorations: 9-year
follow-up. M.C.C.A. Freitas* 1, L. Chiok 1, T.C. Fagundes 2, D.F.G. Cefaly 3,
M.F.L. Navarro 1 (Bauru School of Dentistry, University of São Paulo,
Department of Operative Dentistry, Endodontics and Dental Materials,
Bauru, Brazil, 2 Araçatuba School of Dentistry, São Paulo State University,
Department of Restorative Dentistry, Araçatuba, Brazil 3 University of
North of Paraná, Department of Dentistry, Londrina, Brazil).
236.
Effect of different acids on dentin protease activity. Anas Aaqel S.
Alani *1, Mustafa M. Mutluay 1, Leo Tjäderhane 2, Arzu TezvergilMutluay 1.(1 University of Turku,Institute of Dentistry, 2 University of
Oulu,Institute of Dentistry).
237.
Curing pattern of polywave multiLED lamps: an in vitro study.
Ventura G1*, Zante M1, Comba A1, Coero B1, Francesco A1, Cadenaro
M2, Breschi L3, Berutti E1, Scotti N1 (1University of Turin, Department of
Surgical Sciences, Dental School. 2 University of Trieste, Department of
Medical Sciences. 3 University of Bologna, DIBINEM).
238.
Cementation Protocol for a Glass Ceramic. R.L.A. Carvalho* 2,
F.P.P Leite 1, S.M.B. Pereira 2, M.R. Duarte 1, R.F. Carvalho 1, E.T. Kimpara
25
2 (1 University Federal of Juiz De Fora, Brazil, 2 Institute of Science and
Technology of São José Dos Campos, UNESP, Brazil).
239.
Microtensile Bond Strength to NaF-pretreated Dentin Surface. P.
Altinci* 1, M. Mutluay 1, L. Tjaderhane 2, D. Pashley 3, A. TezvergilMutluay 1 (1 University of Turku, Institute of Dentistry, Turku, Finland, 2
University of Oulu, Institute of Dentistry, Oulu, Finland, 3 Georgia Regents
University, College of Dental Medicine, Augusta, USA).
240.
New digital approach to replicate soft tissue in implant
impressions. N. Ragazzini* 1, E. Evangelisti 1, C. Monaco 1, A. Llukacej 1,
R. Scotti 1 (Division of Prosthodontics, Department of Biomedical and
Neuromotor Sciences - DIBINEM, Alma Mater Studiorum – University of
Bologna, Via San Vitale 59, 40125 Bologna – Italy).
241.
Modification on Gutta-percha Surface by Non-thermal Argon
Plasma. M.S.O. Menezes* 1, M. Prado 1, R.A. Simão 1 (1 Federal
University of Rio De Janeiro, Departament of Metallurgical and Materials
Engineering, Rio De Janeiro, Brazil).
242.
Experimental one-step self-etch adhesives and bonding to carriesaffected dentin. C. P Isolan*1,T.T Maske 1, J.K Schwantz 1 , M.S Cenci 1,
R.R Moraes 1 ( 1 School of Dentistry, Federal - University of Pelotas, RS Brasil).
243.
Tensions generated between experimental model and finite
element analysis. M. Chase-Diaz* 1, A.F.S. Borges 1, E.A. Capello Sousa 2,
G.G. Paschoeto 2, J.H. Rubo 3, M.L. Albarracín 3. (1 Bauru School of
Dentistry - University of Sao Paulo, Department of Operative Dentistry,
Endodontics and Dental Materials, , Bauru, SP, Brazil; 2 Sao Paulo State
University “Júlio De Mesquita Filho”, Department of Mechanical
Engineering, Bauru School of Engineering, Bauru, SP, Brazil; 3 Bauru
School of Dentistry - University of Sao Paulo, Department of Prosthesis,
Bauru, SP, BRAZIL).
244.
Fracture resistance of premolars with extensive and medium
cavity preparations. L.F. Pottmaier*, L.A. Linhares, L.N. Baratieri, L.C.C.
Vieira (Universidade Federal De Santa Catarina, Florianópolis, Brasil).
245.
Influence of surface treatments on fracture strength of implantsupported provisional-crowns. K.V. Cardoso*, M.A. Basílio, E.M. Mariscal,
J.N. Arioli-Filho (Univ Estadual Paulista, Department of Dental Materials
and Prosthodontics, Araraquara, Brazil).
246.
Breakdown potential and repassivation ability of Ni-Ti and SS
archwires. F. Zotti , F. Savoldi, L. Laffranchi, I. Tonni, C. Stretti, A.
Canobbio, F. Paiocchi , S. Bonetti, L. Visconti, C. Paganelli* (University of
Brescia, Italy).
247.
Aesthetic retainer: an evaluation of different glass fiber-reinforced.
A. Lucchese 1,2, M. Manuelli 1,2, I. Mazzolari* 1,2, G. Matarese 3, E.
Gherlone 4 (1 Unit of Dentistry, IRCCS San Raffaele Scientific Institute,
26
Milano Italy, 2 Department of Orthodontics, Vita E Salute San Raffaele
University, Milano Italy, 3 Department of Specialist Medical-Surgical
Experimental Sciences and Odontostomatology, University of Messina,
AOU Policlinico "G. Martino", 4 Unit of Dentistry, Dean Prof. E. Gherlone,
IRCCS San Raffaele Scientific Institute, Milano Italy).
248.
Survival and fracture of intracanal posts: weakened vs
nonweakened roots. V.F. Wandscher*1, C.D. Bergoli 2, I.F. Limberger
3,T.M. Ardenghi 1, L.F. Valandro 1. (Federal University of Santa Maria,
Brazil).
249.
Dimensional accuracy and FE-analysis of conventional and
modified Ticp implants. A. M Silva* 1, CSM Martinelli .1, FP Rodrigues. 1
2, L Nogueira Jr, RM Marinho 1, LS Borges 1, Bottino MA1 (1 Department
of Dental Materials and Prosthodontics, School of Dentistry, Institute of
Science and Technology, UNESP – Univ Estadual Paulista, São Paulo,
Brazil; 2 Visiting Research Fellow, University of Birmingham, School of
Dentistry, Biomaterials Unit, Birmingham, UK).
250.
Nanomechanical properties of TiF4 varnish protective layer after
erosive challenge. F.G. Carvalho* 1, M.I.D. Medeiros 1, H.L. Carlo 1, R.L.
Santos 2, B.A.S.G. Lima 1 (1 Federal University of Paraíba, School of
Dentistry, João Pessoa, Brazil, 2 Federal University of Campina Grande,
School of Dentistry, Patos, Brazil).
251.
Effect of a Synthetic nanocrystalline-Fluorohydroxyapatite on the
eroded enamel lesions MBO Bakhsh *1 , F.Shafiei1, T.Hooshmand1,
F.Moztarzadeh2, M.Tahriri 2,H.Bagheri Gorgani 1 (1Department of Dental
Biomaterials, School of Dentistry/Research Center for Science and
Technology In Medicine, Tehran University of Medical Sciences, Tehran,
Iran 2Biomaterials Group, Faculty of Biomedical Engineering, Amirkabir
University of Technology, Tehran, Iran).
252.
Varnish containing biomaterial in subsurface carious lesions of
primary teeth T. Varanda, F. Naufel*, L.F. Pacheco, K.R. Kantovitz, R.M.
Puppin-Rontani, F.M. Pascon (University of Campinas, Piracicaba Dental
School, Pediatric Dentistry Department, Piracicaba, Brazil).
253.
Effect of QMix with Ultrasonic Irrigation in Smear Layer Removal
M.C. Prado* 1, F. Leal 2, R. A. Simão 3, H. Gusman 1, M. Prado 1,3 (1
Federal University of Rio De Janeiro, Department of Dental Clinic, RJ,
Brazil, 2 State University of Rio De Janeiro, Department of Dental Clinic,
RJ, Brazil, 3 Federal University of Rio De Janeiro, Metallurgical and
Materials Engineering, RJ, Brazil).
254.
Analysis of laboratorial testing: a scenario to reproduce clinical
findings. P. Benetti* 1, J.R. Kelly 2, A. Della Bona 1, P.D. Meirelles 1 (1
University of Passo Fundo, BR, 2 University of Connecticut, USA).
27
255.
Intensification of bleaching effect by Fenton and photo-Fenton
reactions. M.D. Santos*, B.A. Lopes, P.E.C. Cardoso (Universidade De São
Paulo, São Paulo -Brasil).
256.
Analyze the presence of occlusal interference and non-carious
cervical lesions. F.A. Pereira* 1, J.B.C. Meira 1, A.R.G.F. Costa 2, T.A.Q.
Barbosa 2, P.F. Silva 2, R.R. Gomes 2, P.V. Soares 2, (1 University of Sao
Paulo, Biomaterials and Oral Biology Department, Sao Paulo, Brazil, 2
Federal University of Uberlandia, Operative Dentistry and Dental
Materials Department, Uberlandia, Brazil).
257.
Characterization of rubber dam by mechanical thermal and optical
analysis. A.E.C. Santos*1, V. Macedo 1, M. Prado 2, G.D.S. Pereira 2, R.C.R.
Nunes1 (1Universidade Federal Do Rio De Janeiro, Instituto De
Macromoléculas Professora Eloisa Mano, Rio De Janeiro, RJ, Brazil. 2
Universidade Federal Do Rio De Janeiro, Faculdade De Odontologia, Rio
De Janeiro, RJ, Brazil.
258.
Fenton and photo-Fenton reactions on degradation of food dye.
Silva GL*, Lopes BA, Cardoso PEC – (University of São Paulo –
Department of Biomaterials and Oral Biology – São Paulo – Brazil).
259.
Action time of different concentrations of hydrogen peroxide. A.
Rodrigues*, B.A. Lopes, P.E.C. Cardoso (University of São Paulo –
Department of Biomaterials and Oral Biology – São Paulo - Brazil).
260.
Ceramic Repair- Effect of Primer, Universal Adhesives and Aging. S.
Singhal, S.A. Antonson* and D.E. Antonson. University at Buffalo,
Department of Restorative Dentistry, Buffalo, NY, USA.
261.
Effect of Cement Removal Technique on Morphology At ToothCeramic Margin. S.M.B. Pereira*1, L.C. Anami1, J.M.C. Lima1, R.L.A.
Carvalho1, R.O.A. Souza2, M.A. Bottino1, L.F. Valandro3 (1 Univ Estadual
Paulista - UNESP, Institute of Science and Technology, BRAZIL; 2 Federal
University of Rio Grande Do Norte, BRAZIL; 3 Federal University of Santa
Maria).
262.
7-year retrospective study of root-canal treatments: Thermafil vs
warm-vertical techniques. C. Prati, C. Pirani*, V. Tinarelli, M.R. Gatto and
M.G. Gandolfi (Endodontic Clinical Section, Department of Biomedical and
Neuromotor Sciences (DIBINEM), Alma Mater Studiorum University of
Bologna, Bologna, Italy).
263.
Wear analysis of different Nickel Titanium instruments after
clinical uses. C. Pirani, F. Iacono*, V. Tinarelli, F. Bonaccorsi, M.G. Gandolfi
and C. Prati. (Endodontic Clinical Section, Department of Biomedical and
Neuromotor Sciences, Alma Mater Studiorum University of Bologna,
Bologna, Italy).
264.
Effects of sandblasting on early bond strength. D. Battaglia*, F.
Cerutti, G. Augusti, F. Tranchida, D. Augusti, D. Re (Department of Oral
Rehabilitation, University of Milan, Italy).
28
265.
Zirconia dental implants: success assessment in a 4-year follow-up.
A. E. Borgonovo, V. Vavassori, L. Monticelli*, D. Battaglia, F. Rigaldo, D. Re
(Department of Oral Rehabilitation, University of Milan, Italy).
266.
Marginal Adaptation of New Bulk Fill Composites: Microscopical
Evaluation. Acquaviva PA*, Madini L, Nembrini E, Brazzoli S, Papacchini
F, Fabianelli A Cerutti (Univesity of Brescia,Italy).
267.
In-vitro micromechanical characterization of porcine periodontal
ligament. F. Savoldi* (University of Brescia, Italy).
29
Session 4 Biological Properties-Bioactive Materials (Friday 10th, October, 11 am).
268.
New Five Minerals Oxides Pulp Capping Material Compared with
Dycal M.N. Ala Rachi, T.F. Al-Nahlawi*, M.T. Kouki (Syrian Private
University, Operative Dentistry Department, Damascus, Syria).
269.
Two-year clinical evaluation of primers containing chlorhexidine
digluconate V.P.A. Saboia1 M.S.R.G. Araújo1, L.C. Souza1, F.M. Apolônio1,
L.O. Barros1, A. Reis2 A.D2, Loguércio*2 (1Federal University of Ceará,
Department of Restorative Dentistry, Fortaleza, Ceará, Brazil, 2State
University of Ponta Grossa, Department of Restorative Dentistry, Ponta
Grossa, Paraná, Brazil).
270.
Masticatory Function Induced Subnanostructural Changes at the
Resin-Dentin Interface. M Toledano*, FS Aguilera, I Cabello, R Osorio.
(University of Granada, Spain.)
271.
Bonding of adhesive luting agents to caries-affected dentin A.C.
Peixoto 1, A.A. Bicalho 2, C.P. Isolan 3, T.T Maske 3, C.J. Soares 2, R.R.
Moraes 3, M.S. Cenci 3, A.L. Faria-E-Silva* 1 (1 Federal University of
Sergipe, Brazil, 2 Federal University of Uberlândia, Brazil, 3 Federal
University of Pelotas, Brazil)
272.
Tissue engineering: xeno-free culture of human periodontal
ligament stem cells. F. Diomede*, O. Trubiani (Department of Medical,
Oral and Biotechnological Sciences, University “G. D’Annunzio”, ChietiPescara, Italy).
273.
Effect of bioactive niobium-phosphate-glass incorporated to guttapercha on biofilm formation C. N. Carvalho*1,3, Z. J. Wang2, Y. Shen2, G.
Gavini3, J. R. Martinelli4, A. Manso2, M. Haapasalo2 (1 School of Dentistry,
University Center of Maranhão-Uniceuma, São Luís, MA, Brazil 2
Department of Oral Biological and Medical Sciences, Faculty of Dentistry,
the University of British Columbia, Vancouver, British Columbia, Canada.
3 Department of Restorative Dentistry, School of Dentistry, University of
São Paulo, São Paulo, Brazil. 4 Center of Materials Science and
Technology, Energy and Nuclear Research Institute, São Paulo, Brazil).
274.
Ability of multi-mineral-ion release from novel Apatite-IonomerCement. Y. Shinonaga*, T. Nishimura, S. Chiu, H. Chiu, Y. Abe, K. Arita
(Department of Pediatric Dentistry, Osaka Dental University, Osaka,
Japan)
275.
Effect of rewetting suspensions of bioactive-glass on resin-dentin
bond strength. J. Bauer 1*, M.D.S Lanza 2, H. Vidotti 3, C.N. Carvalho 4, J.R.
Martinelli 5, A.P. Manso 2, R.M. Carvalho 2 (1 University Federal of
Maranhão, Dentistry I, São Luís, Brazil (UFMA), 2 University of British
Columbia, Vancouver, Canada (UBC), 3 University of São Paulo, Bauru,
Brazil, 4 University Ceuma (Uniceuma), São Luís, Brazil, 5 Energy and
Nuclear Research Institute (IPEN), São Paulo, Brazil)
30
276.
An evaluation of degradation in adhesive resins using QLF. T.Y.
Park* , S.J. Kim, J.B. Min (Chosun University, Department of Conservative
Dentistry, Gwangju, Rebulic of Korea).
277.
Influence of Fiber Types on Cytotoxicity Properties of FiberReinforced Composites. S. Sunarintyas* 1, W. Siswomihardjo 1, B.
Primario 1, I.D. Suryana 1, J.P. Matinlinna 2, (1 Universitas Gadjah Mada,
Indonesia, 2 University of Hong Kong, Hong Kong)
278.
Novel biomimetic surfaces through protein selective adsorption by
anti-Fibronectin aptamers. C. Galli* 1, M. Piergianni 1, G. Graiani 1, S.
Lumetti 1, A. Smerieri 1, E. Manfredi 1, G. Passeri 2, G. Ghiacci 1, M.
Bonanini 1, GM. Macaluso 1. (1 Dep. Biomedical, Biotechnological and
Translational Sciences, University of Parma, Parma, Italy; 2 Dep. Clinical
and Experimental Medicine, University of Parma, Parma, Italy)
279.
Antibacterial and mechanical properties of silver zeolite blended
dental composite. P. Ekworapoj*, P. Promajaree, K. Boonyarit, and T.
Sritulanon. (Srinakarinwirot University, Thailand).
280.
Surfactant as potential modifier of acquired pellicle: a pilot study
R.F. Zanatta* 1, K.M. Miyamoto 1, C.R.G. Torres 1, C.J. Soares 2, A.B.
Borges 1 (1 - Institute of Science and Technology, São Paulo State
University, Brazil, 2 - Federal University of Uberlandia, Brazil)
281.
The effect of composite materials on gingival cells. O. Polydorou*
1, C. Rueppell 1, S.D. Schulz 2, P. Tomakidi 2, E. Hellwig 1 (1 Department
of Operative Dentistry and Peridontology, Center of Dental Medicine,
University of Freiburg, GER, 2 Department of Oral Biotechnology, Center
of Dental Medicine, University of Freiburg, GER)
282.
Dentin erosion prevention by matrix metalloproteinase and
cysteine cathepsin inhibition. A.R. Hannas*1, B.L. Zarella 1, S. Charone 1,
V. Taioki 1, M.T. Kato1, L. Tjäderhane 2, M.A.R. Buzalaf 1 (1 Bauru School
of Dentistry, University of São Paulo, Department of Oral Biology, Bauru,
SP, Brazil; 2 Institute of Dentistry, University of Oulu, Medical Research
Center Oulu, Oulu University Hospital and University of Oulu, Oulu,
Finland).
283.
Bioactive glass coating of titanium implants using grit-blasting
technique. F. Al-Khayyat*, R. Hill (Unit of Dental Physical Sciences, Queen
Mary University of London, London, UK).
284.
Implant surfaces affect gene expression of fibroblasts and
epithelial cells. Stoecklin-Wasmer 1,2; G. Ghiacci* 1,2,3; C.; A. Sculean 1;
R. Gruber 1,2 (1 Department of Periodontology, School of Dental
Medicine, University of Bern, Bern, Switzerland; 2 Laboratory of Oral Cell
Biology, School of Dental Medicine, University of Bern, Bern, Switzerland;
3 Department of Biomedical, Biotechnological and Translational Sciences,
University of Parma, Parma, Italy)
31
285.
Interactions of strontium with the dentine-pulp complex.
M.Huang*, S.C.F.Rawlinson, R.G.Hill (Institute of Dentistry, Queen Mary,
University of London, London, UK)
286.
Beneficial Effects of Adiponectin and its Combination with EMD. J.
Deschner* 1, S. Keser 1, A.V.B. Nogueira 2, J.A. Cirelli 2, S. Jepsen 1, A.
Jaeger 1, S. Eick 3, M. Nokhbehsaim 1 (1 University of Bonn, Bonn,
Germany, 2 Univ Estadual Paulista – UNESP, Araraquara, Brazil, 3
University of Bern, Bern, Switzerland).
287.
Cell Viability and Differentiation of new cements in vitro. Y Shin*
1, JS Song 2, H Lee 2, J-E Jung 2, D-G Seo 3 (1 Yonsei University,
Department of Conservative Dentistry, Seoul, Korea, 2 Yonsei University,
Department of Pediatric Dentistry, Seoul, Korea, 3 Seoul National
University, Department of Conservative Dentistry, Seoul, Korea).
288.
Custom made innovative composite scaffold for bone regenerative
medicine. Ciocca L.*1, Lesci I.G.2, Donati D.3, Scotti R. 1. (1 Dept. of
Biomedical and Neuromotor Sciences, University of Bologna, Italy; 2
Department of Chemistry “G. Ciamician”, University of Bologna, Italy; 3
Bone Regeneration Laboratory, Rizzoli Orthopaedic Institute, University
of Bologna, Italy).
289.
Morphological evaluation of dentin and Y-TZP after short-pulse
laser application. A.B. Matos* 1,P.F. Cesar 2, L.T. Trevelin 1, B.T.F. Silva 1,
C.S. Azevedo 1, E.Lima 2 (1 Department of Operative Dentistry, School of
Dentistry University of Sao Paulo, Brazil; 2 Department of Biomaterials
and Oral Biology, School of Dentistry University of Sao Paulo, Brazil).
290.
Cytotoxicity of experimental chitosan methacrylate polymer for
dental adhesive purposes. M. Diolosà1*, E. Marsich1, I. Donati1,
G.Turco1, S. Paoletti1, R. Di Lenarda1, L. Breschi2, M. Cadenaro1
(1University of Trieste, Trieste, Italy; 2University of Bologna, Bologna,
Italy).
291.
Dentinal hypersensitivity: the role of salivary calcium in diagnosis.
A. G. Manso, J. Carmo*, A. P. Nascimento, M. A. Bernardo, J. Brito, M. F.
Mesquita (1 Interdisciplinar Research Centre, Lisbon, Portugal).
292.
Effect of Light Activation on Antimicrobial Properties of Adhesive
Systems. C.B. Andre 1, B.P.F.A. Gomes 1, T.M. Duque 1, G.M.B. Ambrosano
2, D.C.N. Chan 3, M. Giannini* 1 (1 Piracicaba Dental School, State
University of Campinas, Department of Restorative Dentistry, Piracicaba,
Brazil, 2 Piracicaba Dental School, State University of Campinas,
Department of Social Dentistry, Piracicaba, Brazil, 3 University of
Washington, School of Dentistry, Department of Restorative Dentistry,
Seattle, USA).
293.
Mechanical properties and ion release of bioactive experimental
composites. M. D. S. Chiari*, R. R. Braga, M.C Rodrigues (University of São
Paulo, Department of Biomaterials and Oral Biology, São Paulo, Brazil).
32
294.
In vitro biofilm formation on experimental composites containing
calcium-phosphate nanoparticles. A. Ionescu 1, E. Brambilla 1, G.
Cazzaniga* 1, R. Braga 2, M. Rodrigues 2, S. Hahnel 3 (1 University of
Milan, Department of Biomedical, Surgical and Dental Sciences, Milan,
Italy, 2 University of São Paulo, Department of Biomaterials and Oral
Biology, School of Dentistry, São Paulo, Brazil, 3 Regensburg University
Medical Center, Department of Prosthetic Dentistry, Regensburg,
Germany).
295.
Effect of 0.2% chitosan solution on root canal fillings. J.F.M.
Chaves*1, C.V. Martins1, Y.T.C. Silva-Sousa2, A.M. Cruz-Filho1, M. BritoJúnior1, A.E. Sousa-Gabriel1, M.D. Sousa-Neto1 (1 University of Sao Paulo,
Brazil, 2 University of Ribeirao Preto, Brazil).
296.
Solubility and repair of glass ionomer cements after acid
challenges. L. Mestrener* 1, T.C. Fagundes 1, R.H. Sundfeld 1, S. Rahal 1,
A.L.F. Briso 1, P.H. Dos Santos 2 (1, Department of Restorative Dentistry,
Araçatuba Dental School, UNESP, Araçatuba, São Paulo, Brazil; 2,
Department of Dental Materials and Prosthodontics, Araçatuba Dental
School, UNESP, Araçatuba, São Paulo, Brazil).
297.
Inflammatory response of fibroblasts stimulated by dental
materials. K.C.S. Modena * 1, 3; M.P. Calabria 1; C.N. Pegoraro 1; M.C.
Veronezi 1; C.R. Sipert 2; C.F. Santos 3; M.T. Atta 3; M.F.L. Navarro 3 (1
University of Sacred Heart, Bauru, Brazil, 2 School of Dentistry, University
of São Paulo, São Paulo, Brazil, 3 Bauru School of Dentistry, University of
São Paulo, Bauru, Brazil).
298.
Microleakage of Glass-Ionomer, Flowable Composite, Biodentine
and Fiber-Reinforced Base Materials. C. Boutsiouki, K. Tolidis, P.
Gerasimou, E. Panagiotidou* (University of Thessaloniki, Greece).
299.
The effect of dimethyl sulfoxide (DMSO) concentration on bonding
to dentin. Akipek S1*, Seseogullari-Dirihan R2, Bala O1, Tjäderhane L3
Tezvergil-Mutluay 2A. (1 University of Gazi, Turkey, 2 University of
Turku, Finland, 3 University of Oulu, Finland).
300.
Use of riboflavin/blue light in improving dentin bonding. P.I.
Chen* 1, 2 (1 National Cheng Kung University, 2 Changhua Christian
Hospital) S.F. Chuang 1,3 (1 National Cheng Kung University, 3 National
Cheng Kung University Hospital).
301.
Temperature evaluation during photoactivation with different
lights and restorative steps. L.M.L. Andreatta*, J.F.S Bombonatti, A.Y.
Furuse, M.A. Zens, R.F.L. Mondelli (University of São Paulo, Department of
Endodotics, Operative Dentistry and Dental Materials, Bauru, BR).
302.
Microtensile Bond Strength of Universal Adhesive System to Deep
Dentin. C.P. Gré*, M.A.C. Andrada, S. Monteiro Júnior, D.P. Lise, C.
Deucher, V.C.Ruschel (Federal University of Santa Catarina, Brazil).
33
303.
HPLC analysis of bisphenol-A elution from resin composites after
aging. P. Mourouzis* 1, E.A. Koulaouzidou 1, V. Samanidou 2, G. Palaghias
1 (1 Aristotle University of Thessaloniki, School of Dentistry, Thessaloniki,
Greece, 2 Aristotle University of Thessaloniki, School of Chemistry,
Thessaloniki, Greece).
304.
Osseointegration of anodized implant:effect of fibrin adhesive/TEA
on primary stability. M.C.R.Alves-Rezende* 1, B.C.Capalbo 1, M.T.S.Cury
1, J.L.Rosa 2, S.G.Schneider 2, R.Z.Nakazato 3, P.H.Dos Santos 1,
P.N.Lisboa-Filho 4, M.J.Q.Louzada 5. A.P.R.Alves-Claro 3 (1 São Paulo State
University(UNESP), Araçatuba Dental School, 2 São Paulo University
(USP), Lorena Engineer School, 3 São Paulo State University (UNESP),
Guaratinguetá Engineer School, 4 São Paulo State University (UNESP),
Bauru Science School, 5 São Paulo State University (UNESP), Araçatuba
Veterinary School).
305.
CPP-ACP treatment associated or not Nd:YAG/diode lasers on
eroded/abrased dentin. R.G. Palma-Dibb*, C.V. Toro, J.J. Faraoni-Romano
(University of São Paulo, Ribeirão Preto Dental School, Brazil).
306.
Different BGMs associated to MSC: can tissue engineering help
GBR? E.Patrone* 1, M.Menini 1, P.Pera 1, M.Mastrogiacomo 2, R.Cancedda
2 (1 University of Genoa, Department of Fixed and Implant
Prosthodontics, 2 University of Genoa, Department of Regenrative
Medicine).
307.
Bond strength evaluation of adhesive systems containing natural
antimicrobial components. C.B. André*, G.M.B. Ambrosano, P.L. Rosalen,
M. Giannini (Piracicaba Dental School, State University of Campinas,
Piracicaba, Brazil).
308.
Mechanical properties of model composite resin containing
nanosilver filler. L.S. Gonçalves* 1, C. Gouveia 2, R.F. Bonan 2, F.G.
Carvalho 2, H.L. Carlo 2, P.R.F. Bonan 2, J.E. Oliveira 2, A.C. Lancellotti 3. (1
Uberaba University, Restorative Dentistry, Uberba, Brazil, 2 Federal
University of Paraiba, João Pessoa, Brazil, 3 State University of Campinas,
Restorative Dentistry, Piracicaba, Brazil).
309.
Effects of the exposition to dental alloys in human fibroblasts. G.
Matarese 1, G. Isola* 1, R. Ientile 2, A. Lucchese 3, 4, E. Gherlone 3, L.
Perillo 5, F. Fabiano 1 6, G. Cordasco 1 (1 Department of Specialist
Medical-Surgical Experimental Sciences and Odontostomatology,
University of Messina, Messina, Italy; 2 Department of Biomedical
Sciences and Morphological and Functional Imaging, University of
Messina, Messina, Italy; 3 Unit of Dentistry, IRCCS San Raffaele Scientific
Institute, Milano Italy; 4 Department of Orthodontics, Vita E Salute San
Raffaele University, Milano Italy; 5 Department of Orthodontics, Second
University of Naples, Naples, Italy; 6 Department of Electronic
34
Engineering, Industrial Chemistry and Engineering, University of Messina,
Italy).
310.
Cytokine secretion screening of odontoblasts treated with
Chlorhexidine and Epigallocatechin-gallate. A. Stavroullakis* 1, C. Brito
1, K. Li 1, M.R. Carrilho 2, D.H. Pashley 3, A. Prakki 1 (1 University of
Toronto, Canada; 2 Anhanguera University of Sao Paulo, Brazil; 3 Georgia
Regents University, USA).
311.
Transdentinal citotoxicity of glutaraldehyde-containing
solutions/materials. J. Hebling*¹, D.L.S. Scheffel¹, D.G. Soares¹, F.G.
Basso¹, D.H. Pashley², C.A. De Souza Costa¹ (¹UNESP - Univ Estadual
Paulista, Araraquara, Brazil; ²Georgia Regents University – GRU, Augusta,
USA).
312.
Relationship between non-destructive leakage evaluation and
bond strength of adhesives. P. Makishi*1,2, S. Thitthaweerat 3, A. Sadr 2,
Y. Shimada 2, M. Giannini 1, J. Tagami 2, Y. Sumi 4 (1 State University of
Campinas, BR, 2 Tokyo Medical and Dental University, JP, 3 Mahidol
University, TH, 4 National Center for Geriatrics and Gerontology, JP).
313.
Effect of bioactive glass on implants osseointegration: study in
dogs. P.B.F. Soares*1, C.C.G. Moura 2, C.R. Chinaglia 3, E.D. Zanotto 3, A.
Stavropoulos 4, D. Zanetta-Barbosa 1 (1Department of Oral and
Maxillofacial Surgery and Implantology, School of Dentistry, Federal
University of Uberlândia, Uberlândia, Brazil; 2Department of Biological
and Natural Sciences, Federal University of Triângulo Mineiro, Uberaba,
Brazil; 3Department of Materials Engineering, Vitreous Materials
Laboratory, Federal University of São Carlos, São Carlos, Brazil;
4Department of Periodontology, Faculty of Odontology, Malmö
University, Malmö, Sweden).
314.
Long term microbiological characterization of class V restorations.
Mabellini G.*, Don D., Bozzoli C., Barabanti N., Cerutti A. (University of
Brescia, IT).
315.
Joint-design and welding effect on flexural strength of Ti-6Al-4V
bars. A. J. Fernandes-Neto*1, P.C. Simamoto Júnior1, V.R. Novais1, A.R.
Machado1, L.H.A. Raposo1, C.J. Soares2 1Department of Occlusion and
Fixed Prosthodontics, School of Dentistry, Federal University of
Uberlândia, Uberlândia, Brazil; 2Department of Operative Dentistry and
Dental Materials, School of Dentistry, Federal University of Uberlândia,
Uberlândia, Brazil).
316.
Effects of light-cured MTA like material on direct pulp capping. F
Petrolo*, A Comba, M Scansetti, M Alovisi, D Pasqualini, E Berutti, N Scotti
(University of Turin, Department of Surgical Sciences, Turin, Italy).
317.
Biocompatibility of EDC cross-linked demineralized dentin
collagen matrix. G. Turco* 1, E. Marsich 1, A. Mazzoni 1, R. Di Lenarda 1,
M. Cadenaro 1, Tay FR 2, D. Pashley 2, L. Breschi 3 (1 University of Trieste,
35
Trieste, Italy; 2 Georgia Regents University, College of Dental Medicine,
Augusta, GA, USA; 3 University of Bologna, Bologna, Italy).
318.
Effects of silver nanoparticles on the bonding three adhesive
systems. I. Torres-Gallegos1, G. A. Martinez-Castañon1*, N. V. ZavalaAlonso1, J. P. Loyola-Rodriguez1, N. Patiño-Marin1, J. F. Reyes-Macías1, N.
Niño-Martínez2, and Facundo Ruiz2. (1Autonomous University of San
Luis Potosí, San Luis Potosí, México, 2 Faculty of Science, Autonomous
University of San Luis Potosí, San Luis Potosí, México.).
319.
Influence of thermo-curing on the flexural strength of GIC. G.
Pereira* 1, M. Prado 1, D.C.R.S. Oliveira 2, L.R. Menezes 1, L.T. Prieto 2,
L.A.M.S. Paulillo 2 (1 Restorative Dentistry Department, Dental School,
Federal University of Rio De Janeiro, RJ, Brazil, 2 Restorative Dentistry
Department, Piracicaba Dental School, State University of Campinas, SP,
Brazil.).
320.
Bond Strength and Permeability of HEMA-free Adhesives to
Biomodified Dentin. Bachelar-SÁ, R.*1,2 Leme, AA.2; Giannini M.1;
Bedran-Russo, AK.2 (1 Department of Dental Materials, Piracicaba School
of Dentistry, Campinas State University, Piracicaba, BR; 2 Department of
Restorative Dentistry, College of Dentistry University of Illinois, Chicago,
USA).
321.
Influence of bisacylphosphine-oxide and chitosan in the physicalproperties of resins. W.C. Brandt 1*, I.D. Silva 1, D.C. Oliveira 2, W.R.
Sendyk 1, M.A.C. Sinhoreti 2, L.C. Boaro 1 (1- University of Santo Amaro,
BR, 2- University of Campinas, BR).
322.
Effect of Non-thermal Plasma Therapy on Root Canal Surface. M.
Prado*, R.N. Rozemblit, L.V. Pacheco, M.S.O. Menezes, C.A. Barbosa, R.A.
Simão (Federal University of Rio De Janeiro, Rio De Janeiro, Brazil).
323.
Dual-cured resin cement improved by a thio-urethane oligomer. A.
Bacchi* 1,2, A. Dobson 3, J.L. Ferracane 3, R.L. Consani 2, C.S. Pfeifer 3, (1
Piracicaba Dental School - Campinas State University, Department of
Prosthodontics and Periodontics, Piracicaba, Brazil. 2 Meridional Faculty IMED, Department of Prosthodontics and Dental Materials, Passo Fundo,
Brazil. 3 Oregon Health and Science University, Department of Restorative
Dentistry, Portland, USA).
324.
The Inhibitory effects of Quaternary Ammonium Methacrylates on
Cysteine Cathepsins. PMC. Scaffa* 1, L. Breschi 2, A. Mazzoni 3, N. Barros
4, C. Vidal 5, D. Pashley 6, L. Tjaderhane 7, F. Nascimento 1, and M.
Carrilho 1 (1 Anhanguera University of Sao Paulo, Sao Paulo, Brazil 2
Department of Biomedical and Neuromotor Sciences, University of
Bologna, Bologna, Italy 3 Department of Medical Sciences, University of
Trieste, Trieste, Italy 4 Federal University of Sao Paulo UNIFESP/EPM,
Sao Paulo, Brazi 5 Dept. of Restorative Dentistry, University of Illinois at
36
Chicago, Chicago, IL, US 6 Dept. Oral Biology, Medical College of Georgia,
Augusta, GA 7 University of Oulu, Oulu, Finland).
325.
Anti Erosive Potential of Bioactive Glasses on Enamel. E. Khan1, P.
Sukumaran*2, H.P. Chew2 (1 Faculty of Dentistry, University of Malaya 2
Department of Restorative Dentistry, University of Malaya).
326.
Development of experimental endodontic sealers based on MTA
and salicylate. R.P. Vitti* 1, C. Prati 2, M.A.C. Sinhoreti 1, C.H. Zanchi 3,
F.A. Ogliari 4, E. Piva 3, M.G. Gandolfi 2 (1 University of Campinas,
Department of Restorative Dentistry, Piracicaba, Brazil, 2 University of
Bologna, Department of Biomedical and Neuromotor Sciences, Bologna,
Italy, 3 Federal University of Pelotas, Department of Operative Dentistry,
Pelotas, Brazil, 4 Federal University of Pelotas, Technology Development
Center, Pelotas, Brazil).
327.
Graphene based nanomaterials for bone regeneration: preparation
and characterization. V. Perrotti*,V. Ettorre, S. Zara, P.G. Coelho, V.
Zizzari, A. Di Crescenzo, P. De Marco, A. Cataldi, A. Piattelli, A. Fontana
(University G. d'Annunzio, Chieti-Pescara, Italy).
328.
Thermal denaturation of EDC-cross-linked dentinal collagen, static
or dynamic storage. L Fontanive*1, G Turco1, A Mazzoni1, R DI Lenarda1,
FR Tay2, DH Pashley2, L Breschi3, M Cadenaro1. (1University of Trieste,
Italy; 2Georgia Regents University, Augusta, USA; 3University of Bologna,
Italy).
329.
Drug Loaded Nanodroplets penetration in dentinal tubules.
Tempesta R*, Cuppari M, Ventura G, Gai M, Guiot C, Cavalli R, Berutti E,
Scotti N (University of Bologna, Italy).
330.
Osteoblast-cell behaviour on titanium-surfaces: an in-vitro
analysis of protein-adsorption impact. C.Parisi*1,2, R.Wazen 2, A.Nanci
2,3, G.Piana 1 (1 Faculty of Dentistry, Alma Mater Studiorum, University
of Bologna, Italy, 2 Faculty of Dentistry, Université De Montréal, Canada, 3
Department of Biochemistry and Molecular Medicine, Université De
Montréal, Canada).
331.
Collagen Degradation and MMP Activity in Dentin Biomodified by
Cross-linkers. D.L.S. Scheffel*1, J. Hebling 1, K.A. Agee 2, C.A. De Souza
Costa 1, D.H. Pashley 2 (1 Sao Paulo State University - UNESP, Araraquara,
Brazil; 2 Georgia Regents University – GRU, Augusta, USA).
332.
3-D measurements of volumetric tissue alterations: a fully digital
approach. A. Frassetto* 1, G. Turco 1, A. Mazzoni 1, M. Cadenaro 1, F.R.
Tay 2, D.H. Pashley 2, L. Breschi 3 (1 University of Trieste, Department of
Medical Sciences, Dental Division, Italy. 2 Georgia Regents University,
School of Dentistry, Department of Oral Biology, USA; 3 University of
Bologna, DIBINEM, Italy).
333.
Modification of titanium dioxide particles to reinforce glassionomer restoratives. A.H. Dowling*1, W.S. Schmitt2, G.J.P. Fleming1.
37
(1Dublin Dental University Hospital, School of Dental Science, 2School of
Chemistry, Trinity College Dublin, Ireland).
334.
Remineralizing light-curable resin-based desensitizers doped with
bioactive micro-fillers. A. Babbar* 1, G. Abuna 2, V.P. Feitosa 3, T.F.
Watson 1, R.B.C. Sá 2, D. Gillam 4, M.A.C Sinhoreti 2, M. Giannini 2, S. Sauro
5 (1 King’S College London Dental Institute, London, UK, 2 Piracicaba
Dental School, State University of Campinas, Brazil, 3 Federal University
of Ceará, Fortaleza, Brazil, 4 Queen Mary University of London, London,
UK, 5 Universidad CEU-Cardenal Herrera, Valencia, Spain).
335.
Effect of UV on wettability and bacterial adhesion of TiO2nanotubes. M. Kobayashi* 1,2, A.A. Abdulmajeed 1, J. Moon 3, R.
Punkkinen 3, J. Shimada 2, P.K. Vallittu 1, L.V. Lassila 1 (1 University of
Turku, Department of Biomaterials Science - Turku Clinical Biomaterials
Centre, Turku, Finland 2 Meikai University, Department of Oral and
Maxillofacial Surgery, Sakado, Japan 3 University of Turku, Department of
Information Technology, Turku, Finland).
336.
Phytochemical profile and dentin bioactivity of non-galloylated
proanthocyanidins. A.A. Leme, C.M.P. Vidal, T.R. Aguiar, A.B.S. Sousa, R.
Phansalkar, J.W. Nam, J. Bisson, S.N. Chen, G.F. Pauli, A.B. Bedran-Russo*
(UIC College of Dentistry, USA).
337.
Addtion of Ag to gypsum: effects on microorganisms and
properties. L.E. Rodrigues Filho*, M. Mori, W.A. Saito, S. Cai (University
of São Paulo, Brazil).
338.
Effect of AgNPs/F.oxysporum on the mechanical/antimicrobial
properties of acrylic resin. A.L.S. Borges* 1, T.P. Sato 1, C. Conjo 1, R.D.
Rossoni 2, J.C. Junqueira 1, P.D. Marcato 2, N.E.D. Caballero 3, S.M. Rode 1,
R.M. Melo 1 (1 UNESP, Brazil, 2 USP, Brazil, 3 UNICAMP, Brazil).
339.
Designing a bifunctionalized extracellular matrix for bone
regeneration. E.L. Silva-Benítez*1, J.E. Soto-Sainz 1, A. Gordillo-Moscoso
2, H.I. Medellín-Castillo 2, J.G. Romero-Quintana 3, A.J. Pozos-Guillen 2, R.
Ramos-Payán 3, H. Flores 2. (1 Institutional Doctorate In Materials
Science and Engineering, UASLP, México, 2 Laboratory of Basic Science,
Faculty of Stomatology, UASLP, Mexico, 3 Immunogenetics and Molecular
Microbiology Laboratory of Chemistry and Biology Science Faculty UAS,
Mexico).
340.
Extracellular matrix gel as a new approach for bone regeneration.
J.E. Soto-Sainz *1, E.L. Silva-Benítez 1, A. Gordillo-Moscoso 2, H.I.
Medellín-Castillo 2, J.G. Romero-Quintana 3, A.J. Pozos-Guillen 2, R.
Ramos-Payán 3, H. Flores 2. (1 Institutional Doctorate In Materials
Science and Engineering, UASLP, México, 2 Laboratory of Basic Science,
Faculty of Stomatology, UASLP, Mexico, 3 Immunogenetics and Molecular
Microbiology Laboratory of Chemistry and Biology Science Faculty UAS,
Mexico).
38
341.
Radiopacity, tooth discoloration and calcium release of Portlandbased cements. M.A. Marciano 1, D.F. Oda* 1, R.M. Maenosono 1, B.C.
Cavenago 1, R.Z. Midena 1, P.G. Minotti 1, J. Camilleri 2, R.F.L. Mondelli 1,
F.B. Andrade 1, M.A.H. Duarte 1 (1 University of São Paulo, Department of
Operative Dentistry, Endodontics and Dental Materials, Bauru, Brazil, 2
University of Malta, Department of Restorative Dentistry, Malta).
342.
Human gingival fibroplasts after exposure to 2-Hydroxy-ethylmethacrylate: Morphological evaluation. G.Teti 1*, L.Manzoli 1, S.Pelotti
2, G.A. Mariani 1, S. Durante 1, M Mattioli Belmonte 3, M. Falconi 1. (1
Department of Biomedical and Neuromotor Sciences, University of
Bologna, Italy, 2 Department of Medical and Surgical Sciences, University
of Bologna, Italy, 3 Department of Clinical and Molecular
Sciences,Polythecnic University of Marche, Italy).
343.
Effects of MMP inhibitors blended within dental adhesives. V.
Salvatore* 1,V. Angeloni 2, A. Putignano 3, A. Mazzoni 3, M. Falconi 1, G.
Orsini 3, L. Breschi 1 (1 Dibinem – University of Bologna, Italy; 2 Dep.
Med. Sci. University of Trieste, Italy; 3 Department of Clinical Sciences and
Stomatology, Polytechnic University of Marche, Ancona, Italy).
344.
HPLC analysis of adhesive eluates. R. Gotti 1, S. Focaroli 2*,
G.Orsini 3, A.Mazzoni 4, S., V.Checchi 4, L.Breschi 2 , M.Falconi 2 (1
Department of Pharmacy and Biotechnologies, University of Bologna,
Italy; 2 Department of Biomedical and Neuromotor Sciences, University of
Bologna, Italy; 3 Department of Clinical and Molecular Sciences,
Polythecnic University of Marche, Italy; 4 Department of Medical Sciences,
University of Trieste, Italy, 4).
345.
Anti Erosive Potential of Bioactive Glasses on Dentine. E. Khan 1, P.
Sukumaran 2, H.P. Chew*2 (1 Faculty of Dentistry, University of Malaya,
Malaysia, 2 Department of Restorative Dentistry, University of Malaya,
Malaysia).
346.
In vitro testing of manganese-doped bioglasses to stimulate
osteoblast behaviour. G. Ciapetti 1*, L. Savarino 1, M. Miola 2, E. Verné 2,
C. Vitale-Brovarone 2, N. Baldini 1 (1 Istituto Ortopedico Rizzoli, SSD
Orthopaedic Pathophysiology and Regenerative Medicine, Bologna, Italy,
2 Politecnico Di Torino,Applied Science and Technology Department,
Torino, Italy).
347.
Development of a Novel Doxycycline-Encapsulated Nanotube
Modified Dentin Adhesive. S.A. Feitosa 1,2, J. Palasuk 1, K. Kamocki 1, S.
Geraldeli 3, R.L. Gregory 4, L.J. Windsor 4, J.A. Platt 1, M.C. Bottino*1 (1
Indiana University School of Dentistry/Dental Biomaterials, Indianapolis,
USA, 2 Universidade Estadual Paulista Julio Mesquita, Sao Jose Dos
Campos, Brazil, 3 University of Florida College of Dentistry/Operative
Division, Gainesville, USA, 4 Indiana University School of Dentistry/Oral
Biology, Indianapolis, USA).
39
348.
Morphological and chemical characterization of cross-linked
dentin collagen matrix. P. Gobbi* 1, G. Turco 2, A. Frassetto 2, L.
Fontanive 2, A. Mazzoni 2, G. Teti 3, M. Falconi 3, M. Cadenaro 1, L. Breschi
3 (1 University of Urbino, 2 University of Trieste, 3 University of Bologna,
Italy).
349.
Effect of Curcuminoid Pre-treatment on Dentin Endogenous
Enzymes. R. Seseogullari-Dirihan*1, M. Tekbas Atay 2, D.H. Pashley 3, A.
Tezvergil-Mutluay 4 (1 University of Turku, Finland, 2 Trakya University,
Turkey, 3 Georgia Regents University, USA, 4 University of Turku, Finland.
350.
Low-Sodium Bioactive Glass Coatings for Titanium Implants by
Grit Blasting. M.D. Al-Ani 1, X. Chen* 1,2, R.G. Hill 1 (1 Queen Mary
University of London, UK, 2 University of Manchester, UK).
351.
Influence of PVM/MA Copolymer on Bacterial Adherence to Resin
Surfaces. F. Ozer*, N. Izutani, F. Mante, J. Dirienzo, M. B. Blatz (University
of Pennsylvania School of Dental Medicine, USA).
352.
Bactericidal effect of near-ultraviolet activated anodized Titanium.
RS Williamson1*, M Marquart2, JA Griggs1, MD Roach1, (1Department of
Biomedical Materials Science, University of Mississippi Medical Center,
USA, 2Department of Microbiology, Jackson, MS, USA).
353.
Anodizing specific Anatase/Rutile oxide phases onto Titanium
substrates. MD Roach*, RS Williamson, JA Griggs, JA Thomas,
(Department of Biomedical Materials Science, University of Mississippi
Medical Center, Jackson, MS, USA
354.
Effective MMP inhibition using proantocianidin for short periods
of treatment. C.C. Delgado*1, D.L.S. Scheffel1, J. Hebling1, C.A. De Souza
Costa1, D.H. Pashley2(1 UNESP – Univ Estadual Paulista, Araraquara,
Brazil; 2 Georgia Regents University – GRU, Augusta, USA).
355.
Peptoids promote recovery of ultrastructure in caries
remineralization. Y.-C. Chien1,2, K. Saeki1, A. Fernandez-Martinez 2,3, J.L.
Lau2, J. Tao2,4, C.-L. Chen2,4, R.N. Zuckermann2, J.J. De Yoreo2,4, S.J.
Marshall1, G.W. Marshall1* (1Department of Preventive and Restorative
Dental Sciences, University of California, San Francisco, CA, U.S.A.
2Molecular Foundry, Lawrence Berkeley National Laboratory, Berkeley,
CA, U.S.A. 3Isterre, CNRS & University of Grenoble I, Grenoble, France
4Materials Synthesis and Simulation Across Scales, Pacific Northwest
National Laboratory, Richland, WA, U.S.A).
356.
Macrogeometric Effects on Osseointegration of Dental Implants. N.
Tovar*, P.G. Coelho (New York University College of
Dentistry,Department of Biomaterials and Biomimetics, New York, NY,
USA).
357.
Leucine Rich Amelogenin Peptide Improves the Remineralization
of Enamel Lesions. HG Bagheri*1,2 , A Sadr 1, J Espigares 1, S
Nakashima1 , H Hamba 1, F Shafiei 2, J Tagami 1 (1 Cariology and
40
Operative Dentistry Department, Tokyo Medical and Dental University,
Tokyo, Japan 2 Dental Biomaterials Department, School of Dentistry /
Research Center for Science and Technology In Medicine, Tehran
University of Medical Sciences, Tehran, Iran).
358.
New Nanostructured odontoiatric resins: Surface Roughness and
Endocrine disruptors release. P. Loria* 1, G. Matarazzo 1, R. Spera 1, P.
Ghisellini 1, C. Rando 1, E. Grasselli 2, R. Fabbri 2, L. Canesi 2 and R.
Eggenhoffner 1 (1 Department of Surgical Sciences and Integrated
Diagnostics (DISC), University of Genova, Italy 2 Department of Earth,
Environmental and Life Sciences (DISTAV),University of Genova, Italy)