Tender specification for programmable Power Supply
Programmable Power Supply, SSP-KONSTANTER Series 32N.
Housing:
Desktop, suitable for rack-mounting
1/2 19" (221,5mm) x 2HU (88mm+14mm) x 380,5mm (+17mm) (W x H x D)
Suitable for combining 2 or more units next to each other or on top
AC mains input:
230 V ~ +10 / –15 %, 47 ... 63 Hz
10-A-IEC-Power plug
AC mains output:
Loop through AC mains output for jumper power cord
for power supply of additional units.
Electrical safety:
Protection class I
Overvoltage category II for AC mains
Overvoltage category I for output and interfaces
Pollution level 2, EN 61010-1 / 1993
EMC:
EN 61326-1:1997 +A1: 1998, Industrial usage
Output:
front: 2 x 4 mm security sockets
back: 6-pin terminal block pluggable
incl. Sense-interface with autosensing and reverse polarity protection
Output data: see table below
Output-Isolation:
Floating output with safe electrical separation
towards AC mains and interfaces;
max. allowed potential output-earth 120V
Modes:
adjustable constant voltage or constant current source
with automatic sharp changeover
Einstellzeiten:
0V --> Urated
Urated --> 0V
Analogue Interface:
11-pin interface with screw terminals
Auxiliary power, Trigger, nominal voltage & actual voltage,
nominal current and actual current, Master-/Slave function
2 programmable signal outputs with Open-Collector,
whose signal function can be assigned to certain device functionalities
Digital Interface:
Standard: RS-232C-Interface
Optional: IEEE-488 / IEC 625 Interface
Codes and Formats according to IEEE 488.2
1ms; 1ms
1ms; 1ms
Leerlauf; Nennlast
Leerlauf; Nennlast
Adjustable functions and parameters:
Voltage (nominal & limit), Current (nominal & limit)
Output on/off, over voltage protection level
over current protection level (with/without switch-off, delay time)
Mains power on options: reset, recall, standby
Lockable front elements (per hand, Trigger, digital)
Trigger function:
Calibration
Optocoupler input
Selectable trigger action
Trigger action:
output on/off, sequence start/stop
recall of saved settings
on/off of extremal values memorising
Locking of front elements
Memory:
253 device parameters can be saved
Accessable information:
Measuring of output voltage, current and power
Extremal value memory
Sequence function:
Generation of voltage and current curves with up to 243 setting points
Type:
SSP-KONSTANTER Series 32N
Table:
Name
Pa (W) Ua (V)
SSP 120-20
120
0-20
SSP 120-40
120
0-40
SSP 120-80
120
0-80
SSP 240-20
240
0-20
SSP 240-40
240
0-40
SSP 240-80
240
0-80
SSP 320-32
320
0-32
IEEE Interface, optional
Ia (A)
0-10
0-6
0-3
0-20
0-12
0-6
0-18
Type
32 N 20 RU 10 P
32 N 40 RU 6 P K321A
32 N 80 RU 3 P K322A
32 N 20 RU 20 P
32 N 40 RU 12 P
32 N 80 RU 6 P K332A
32 N 32 RU 18 P
Brand:
Gossen Metrawatt
Country of Origin:
Made in Germany
Manufacturer:
GMC-I Messtechnik GmbH
Südwestpark 15
D-90449 Nürnberg
Tel.:0911-8602-111; FAX 0911-8602-777
E-Mail: info@gossenmetrawatt.com
www.gossenmetrawatt.com
Order No.
K320A
K330A
K331A
K334A
K380A