Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference
MSEC2016
June 27 – July 1, 2016, Blacksburg, Virginia, USA
MSEC2016-Paper No.
PUT PAPER TITLE HERE
Author Name
Affiliation
City, State, Country
Author Name
Affiliation
City, State, Country
Author Name
Affiliation
City, State, Country
Author Name
Affiliation
City, State, Country
KEYWORDS
Put at least three keywords here
ABSTRACT
Put abstract text here.
An abstract should including the following five elements:
(1) objective, (2) motivation, (3) method, (4) result, and (5)
conclusion. At least one sentence should be devoted to each
element.
INTRODUCTION
Early prior research demonstrated the superiority of
ceramics for bearings (1, 2) and the existence of elastohydrodynamic (ehd) lubricant films at ball and roller contacts
(3), the calculation of which is now an accepted part of bearing
engineering. These new concepts are now used in the design of
lubrication systems with solid lubricants that operate in much
more severe environments than oils and greases (4, 5).
Proprietary computer codes and unique patented bearing
configurations for optimizing the performance of bearing/solidlubricant systems have been developed (6, 7 and 8). In this
way, patented self-contained solid-lubricated all-steel and
hybrid-ceramic ball and roller bearings are now available for
environments that do not contribute to their lubrication, such as
in air or vacuum.
LaTex and Framemaker templates can be found at the following
website:
https://www.asme.org/shop/proceedings/conferencepublications/author-templates
Author name
Affiliation
City, State, Country
ASME describes the elements of a paper at the following
website:
https://www.asme.org/shop/proceedings/conferencepublications/elements-of-a-paper
METHOD
Describe your methods here. Feel free to rename this
section as appropriate as well as add additional sections and
sub-sections.
RESULTS
Describe your results here. Feel free to rename this section
as appropriate as well as add additional sections and subsections.
CONCLSUIONS
Include your conclusions here. Re-stating results in a
concise manner by itself does not constitute a conclusion. The
conclusions section should also include text that explains the
significance of the results to the reader. Why should the reader
care about the results?
NOMENCLATURE
Put nomenclature here.
ACKNOWLEDGMENTS
Put acknowledgments here.
REFERENCES
Put references here.
The ASME citation format can be found at the following
website:
https://www.asme.org/shop/proceedings/conferencepublications/references
1
Copyright © 2016 by ASME
2
Copyright © 2016 by ASME
ANNEX A
PUT ANNEX TITLE HERE
Put text of Annex here
3
Copyright © 2016 by ASME