JOB SAFETY ANALYSIS TRAINING GUIDE
JSA # FLC PPS 010
JOB: Operating a Pipe Threader (Electric)
Department: PPS
DATE: October 30, 2013
ANALYSIS BY: Bill Donelan
REQUIRED Personal Protective Equipment (PPE): Goggles/Safety glasses with side shields, safety
shoes/boots, Gloves, Hearing protection (when needed).
REVIEWED BY:
APPROVED BY:
Step
Hazards
Cause
Controls
1
Foot injury
Drop object on foot
Wear safety shoes
2
Electrical shock
Improper operation and maintenance, improper
grounding
Manufacturer’s instructions strictly followed, proper grounding
3
Hand injury
Point of operation, rotating parts
Gloves, situational awareness
4
Eye injury
Flying particles
Safety glasses with side shields
5
Noise
Running equipment
Hearing protection for noise in excess of 85db
EQUIPMENT PROCEDURES/REQUIREMENTS:
1.
2.
3.
4.
Operate equipment in strict accordance with manufacturer’s instructions.
Report any observed defect or safety hazard to you supervisor immediately and Tagout the equipment.
Where any object handled would possibly cause injury to feet if dropped, safety shoes will be worn.
Where any object handled could possibly cause cuts, punctures or abrasions to hands, appropriate gloves will be worn. (Exception: where rotating
machinery presents a greater hazard of entangling gloves, they are optional at the supervisor’s discretion). This approval must be in writing.
5. Keep hands, hair and loose clothing clear of all moving parts.