Curve Rehearsal Room 2 Technical Specification 2015 PDF

advertisement
Technical Specifications –
Rehearsal Room 2
Curve and LTT cannot be held responsible for any costs incurred resulting in information, assumptions or omissions from this
document. It is the responsibility of the visiting company to check critical dimensions before commissioning scenery. Please
check the availability of equipment before planning productions around it.
REHEARSAL ROOM 2
CURVE TECHNICAL SPECIFICATIONS & EQUIPMENT LISTS
CONTACT DETAILS
Reception
Technical Co-Ordinator
0116 242 3560
Sarah Spott
0116 242 3586
s.spott@curvetheatre.co.uk
ACCESS
PARKING
There is no private car parking on site, but Rutland Centre NCP car park is next door and costs £3.90
to park all day (please get your ticket validated at Curve Café Bar). Sat Nav users should use LE1 1TQ
for Rutland Centre NCP
GET IN
Curve is accessed via Vestry Street for the purpose of unloading and get outs
Rehearsal Room two is on the first floor and accessed by a standard passenger lift measuring 900mm
wide x 2100mm high x 2000mm deep
Larger items can be taken to the room via the stairs, of which the smallest opening is 1040mm wide
x 2200mm high
DRESSING ROOMS
A dressing room can be provided with a bathroom, shower and lit mirrors, please request if needed.
If a room adjacent to the performance space is desired there is a modest changing room leading off
the lobby, please note there is no running water in this room.
STAGE
Please see attached plan.
The setting line is at 6m from the back wall along the nominal centre line.
The floor is a semi sprung dance floor, screwing down is not permitted. The stage is level with the
audience and is covered with a black Harlequin dance floor.
The space has black drapes on three sides
One wall has full length ballet mirrors and a fixed ballet bar
A fire route must be maintained at no less than 1.2 metres width from the audience to the upstage
right Fire Exit.
LIGHTING EQUIPMENT
Rehearsal room 2 has a fixed and pre focused lighting rig all changes made to this rig must be
reinstated before departure by the visiting company. House lights may not be moved.
See attached Lighting Plan Appendix B.
If a Pre Rig is desired please contact the technical managers with your plans 4 weeks before the
date of your first performance.
POWER
1 x 63 Amp 3 phase supply in Lobby
6 x 13 Amp outlets in grid, non-switched.
2 x 13 Amp technical power outlets at floor level on stage
DIMMING
2 x ETC Smartpack Mobile dimmer rack 24 channels total.
Dimming is distributed to the Rehearsal room via a number of integrated Soca lines
6 x soca patches to the grid
3 x soca patches to the floor level
1 Channel of Dimming is reserved for House Lights
CONTROL
1 x Programmable Lighting Control Desk ETC Element
2 x LCD Monitor 15”
PROFILE LANTERNS
12 x Cantata 25/50
FRESNELS
10 x Cantata Fresnels (2 without barn doors)
PARCANS
14 x Parcan CP64
8 Chroma Q scrollers see Appendix B for Scroll colours
SOUND EQUIPMENT Rehearsal Room 2
POWER
13amp clean power supply available inside RR2
DESK
Yamaha MG166C
OUTBOARD
Yamaha Q2031A Graphic Equaliser
Yamaha SPX1000 Effect processor
PLAYBACK
Denon DN-C550R (twin CD)
SPEAKERS
2 x RCF ART 310A (on K&M speaker stands)
APPENDIX A
Scroller Colours:
Frame 1 Open White
Frame 2 L103 Straw Tint
Frame 3 L022 Dark Amber
Frame 4 L025 Sunset Red
Frame 5 L201 Full C.T. Blue#
Frame 6 L075 Evening Blue
Frame 7 L195 Zenith Blue
Frame 8 L120 Deep Blue
Frame 9 L023 Scarlet
Frame 10 L128 Bright pink
Frame 11 L798 Chrysalis Pink
Frame 12 L137 Special Lavender
Frame 13 L180 Dark Lavender
Download