Organized by
Laboratoire de Recherche en Technologie de
Fabrication Mécanique, LaRTFM, ENP Oran. Algeria.
NT2F15
Laboratory of Applied Biomechanics & Biomaterials
LABAB, ENP Oran. Algeria
Fifteenth International Conference
New Trend on Fracture and Fatigue
"Fracture and Environment"
Laboratory for Theoretical Physics and Materials
Physics.University Hassiba Benboauli of Chlef, Algeria
University of Lille 1-Sciences et Technologies, France
Oran. October 20-23, 2015
University of Salamunca, Spain
Call for Papers
Laboratoire de Fiabilité Mécanique de l’Ecole
Nationale d’Ingénieurs de Metz, France
First Announcement
Faculty of Technology and Metallurgy, University
of Belgrade
Society for Structural Integrity and Life
Supported by
Ecole Nationale Polytechnique
d'Oran, Algeria
University Hassiba Benbouali
Chlef, Algeria
The objective of the Fifteenth "New trend on Fracture and Fatigue" (NT2F15)
co-organized by the National Polytechnic School of Oran, Laboratory of
Applied Biomechanics & Biomaterials (LABAB-ENP Oran), Research Laboratory
on Technology and Mechanical Manufacturing (LaRTFM-ENP Oran), and the
Laboratory for Theoretical Physics and Materials Physics, the University of
Hassiba Benbouali of Chlef, is to discuss the present status of mechanics
based constitutive simulation and modelling of materials and associated
experimental observations methods. Such approaches allow a better
understanding of how the material microstructure, environment and loadings
affect degradation and failure mechanisms. Physics-based models are also
necessary for extrapolation of data beyond operational experience and for
correctly predicting the transferability between specimen tests and real
components. The structural integrity and functioning of Physical components is
affected by initial defects as well as by time dependent degradation
mechanisms such as creep, fatigue, stress-corrosion, irradiation embrittlement
and thermal ageing. The modeling and understanding of degradation
mechanisms and the predictability of failure loads is constantly evolving.
Recently, we have seen a trend towards physics-based models that simulate
New Trends in Fatigue and Fracture NT2F15 Oran, Algeria „Fracture Mechanics and Environment“ 20-23 October 2015.
the degradation and failure processes and mechanisms that operate at
different length and time scales. Such approaches allow us to make better
prediction of long-term performance and safety margins, transferability
between specimens and components. This event will give an overview of the
different physics-based models, simulations and the experimental studies for
theoretical phenomena and materials. The emphasis will be on the meso-scale,
corresponding to grains, which is the relevant length-scale for many basic
material properties and degradation mechanisms. Associated experimental
studies and the multi-scale models from dislocation to phenomenological
macro-scale studies are in the scope of the Conference. The Conference is also
an opportunity for scientists and engineers from Algerians Master, Phd
Students, Maghreb countries Communities and EU Member States to discuss
research activities that could be a basis for future collaborations. Structural
Integrity and Life (ISSN 1451-3749) will be the supporting journal of the
conference where all reviewed and accepted conference papers will be
published. Authors of selected papers will be invited to submit extended
versions for publication.
Venue
Oran, also called Wahrān, French Ouahran, city, north western Algeria. It lies
along an open bay on the Mediterranean Sea coast, about midway
between Tangier, Morocco, and Algiers, at the point where Algeria is closest
to Spain. With the adjacent city of Mers el-Kebir, a fishing centre at the
western end of the bay, Oran is the country’s second largest port,
after Algiers. Pop. (2005) 724,000; (2010 est.) 770,000. Oran was founded at
the beginning of the 10th century by Andalusian merchants as a base for
trade with the North African hinterland, and it developed commercially owing
to its sea connections with Europe. It became the port for the North African
kingdom of Tlemcen in 1437 and also was an entrepôt for trade with the
Sudan. In 1492 and 1502 Oran received colonies of Spanish Muslims (Moors)
1
fleeing from forcible conversion to Christianity. Thereafter, its prosperity began
to decline, and, with Mers el-Kebir, it became a centre for pirates. It was
occupied by the Spanish in 1509. For the next two centuries, Oran was
contested by the various Mediterranean powers until it fell to the Turks in
1708.
Organizing Committee
Chairman's
Tamine Taoufik
Members
Guy Pluvinage
Benzaama Habib
Khelil Foudil
Gasmi Bachir
Omsalem Abdellah
Khadraoui Abdelkader
Fares Chahinez
Aour Benaoumeur
Mohammed hadjmeliani Ljubica Milovic
Laoufi Fatiha
Madani Yessad Habib
Belkahla Noureddine
Oudrane Abdellatif
Benmoussa Fatima
Khelil Ali
Ouagued Malika
Slimani Ahmed
Beloudroua Omar
Ouel Mbeireik Mohamed
Scientific Committee
The constant raids of pirates based at Mers el-Kebir prompted Spain to retake
Oran in 1732. Devastated by an earthquake in 1790, the town was evacuated
and returned (in 1792) to the Turks, who settled a Jewish community there.
Oran was occupied in 1831 by the French, who developed it as a modern
port and turned Mers el-Kebir into a major naval base. In the Turkish part
of the old town is the Great Mosque, built in 1796 with money obtained by
ransoming Spanish captives. To the east lies the Château Neuf, former
residence of the beys of Oran and later a French army headquarters.
History of NT2F Congress
The Congress NT2F was founded in 2000 by the "Laboratoire de Fiabilité
Mécanique-LFM-" (Metz) as a annual meeting of the “Without Walls European
Institute on Fatigue and Fracture” (WWIFF). The congress held successively:
NT2F1 Metz (France) – April
NT2F2 Hammamet (Tunisia) –
2001
May 2003
NT2F3 Ningbo (China) –
NT2F4 Aleppo (Syria) – May
November 2003
2004
NT2F5 Bari (Italy) – May
NT2F6 Kranj (Slovenia) – May
2005
2006
NT2F7 Miskolc (Hungary) –
NT2F8 Ankaran (Slovenia) –
May 2007
October 2008
NT2F9 Belgrade (Serbia) –
NT2F10 Metz (France) –
October 2009
August 2010
NT2F11 Polignano a Mare, Bari
NT2F12 Brasov (Romania) –
(Italy) – July 2011
May 2012
NT2F13 Moscow (Russia) –
NT2F14 Belgrade (Serbia) –
May 2013
September 2014
Chairman's :
Moussa Naїt-Abdelaziz France
Benamar Ali, Algeria
Members
Guy Pluvinage, France
Donka Angelova, Bulgaria
Lajos Borbas, Hungary
Katia Casavola, Italy
Zanoun Abdelouahab, Algeria
Ghabriout Boudjemaa, Algeria
Marenglen Gjonaj, Albania
Dražan Kozak, Croatia
Mersida Manjgo, Bosnia and Herzegovina
Yury Matvienko, Russia
Guy Pluvinage, France
Marko Rakin, Serbia
László Tóth, Hungary
Vlad Ulmanu, Romania
Tomaž Vuherer, Slovenia
Larbi Loukarfi, Algeria
Taoufik Boukharouba, Algeria
Mourad Lounis, Algeria
Madjid Merieme Benziane, Algeria,
Taoufik Tamine, Algeria
Aid Abdelkrim, Algeria
Hamou Zahloul, Algeria
Belouchrani Mohamed el Amine, Algeria
Khaled ElMiloudi, Algeria
Mohammed Hadj Meliani, Algeria
Aour Benaoumeur, Algeria
Ljubica Milovic, Serbia
Zitouni Azari, France
Zijah Burzić, Serbia
Sveto Cvektovski, Macedonia
Srier Zouaoui, Algeria
Naser Merah, KSA
Nenad Gubeljak, Slovenia
Paolo Lazzarin, Italy
Liviu Marșavina, Romania
Carmine Pappalettere, Italy
Zoran Radaković, Serbia
Ivan Samardžić, Croatia
Cetin Sonsino, Germany
Sorin Vlase, Romania
Milorad Zrilić, Serbia
Jesus Toribio , Spain
Chaoui Kamel, Algeria
Julien Capelle, France
Ali Khelil, Algeria
Ahmed Bettahar, Algeria
Abdelmoumen Guedri, Algeria
Fares Chahinez, Algeria
Fodil Hammadi, Algeria
Abdelkader Oulhadj, Algeria
New Trends in Fatigue and Fracture NT2F15 Oran, Algeria „Fracture Mechanics and Environment“ 20-23 October 2015.
Abdelakader Hocine, Algeria
Abderezek Elhoud, Lybia
Mustpaha Allouti, Algeria
Abdelah Ouagued, Algeria
Hadj Taieb Tunisia
Adda Bedia El Abbes, Algeria
Mohamed Benarous, Algeria
Mahmoudi Hacène, Algeria
Hamza Samir , Tunisia
Ahmed Abbadi, Morocco
Topics
•
•
•
•
•
•
•
•
Fatigue
• Failure Analysis
Criteria of Fracture and Failure
• Damage and Micromechanics
Microstructurally Short Cracks
• Length Scales
Residual Stresses
• Fracture and environment
Corrosion, Environmentally Assisted Cracking and Corrosion Fatigue
Extended Finite Elements Methods and their Application
Reliability and Integrity of Engineering Structures
Fracture and Fatigue in Applied Biomechanics
Registration fee
Registration Fees are payable in advance of the conference, includes: Access to
the Conference sessions, Poster area and Workshops, all conference documents
and certificate of attendance, lunch and mid-session refreshments as scheduled
in the Conference program.
Algerian Participants
12000 DA
Students
6000 DA
Exhibition 50000 DA or 500 Euros
Other Participants
450 Euros
Key dates
Deadline for abstract submission,
July 25, 2015
Notification of abstract acceptance,
July 30, 2015
Full paper submission
August 10, 2015
The Official language of the International NT2F15 meeting is English. All the
invited talks, oral and poster contributions must be done in English.
Contact
E-Mail: nt2f15@yahoo.com
https://www.facebook.com/uhbc.dz
Mobile: (+213) 7 70709563
https://www.Univ-chlef.dz/lptpm
Tél: (+213) 27 72 17 94
Fax: +213 27 72 17 94
Abstract Submission
Participants, who would like to make an oral or poster presentation at
the NT2F15 must submit an abstract for the consideration and approval of the
Program Committee. All abstracts must be written, according to the Abstract
Template, in English and submitted by e-mail, in format WORD at email: nt2f15@yahoo.com
2