Price/Proposal No. 64 – Disk Dated 1-5-09
Prices and specifications subject to change without notice.
Marvel Manufacturing Company, Inc.
3501 Marvel Drive, Oshkosh, WI 54902
Phone (800) 472-9464 (920) 236-7200
Fax (920) 236-4156
Web Site: www.marvelsaws.com
PM220/20 & PM220/30 SPARTAN
SINGLE END PUNCH
STANDARD SPARTAN PM220//20 & PM220/30 HEAVY-DUTY, SINGLE END PUNCH
WITH 220 TON CAPACITY, 20 H.P., 20” THROAT AND 30” THROAT
Capacities & Specifications Rated on 65,000 PSI Tensile
PUNCHING
Punch Pressure: 220 tons.
Quick Change Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper: For fast and easy
setup.
Die Holder: Adjustable in machined T-slots for quick punch
and die alignment.
Standard Tooling: 1-1/2” in 1-3/16” material.
Cleveland Punch and Die: Series 26 punch, 62 die.
Large Tooling: 2” in 1-1/8” material.
Cleveland Punch and Die: Series SP51P, SP80D die.
Optional Oversize Tooling: 8” in 1/4” material.
Maximum Channel Flange: 7”.
Throat Depth: 20” and 30”.
Stroke Length: 3-15/16”.
Cycles per Minute in 3/4”: 28.
20” Throat Table Size: 27-1/2” x 27-1/2”.
30” Throat Table Size: 27-1/2” x 37-1/2”.
Punching Station Work Height: 41-1/4”.
OPTIONAL TOOLING
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Flat Bar Shearing Capacity: 6” in 5/8” material.
Angle Shearing Capacity: 3-1/2” x 3-1/2” x 1/2”.
Shearing with no material loss and minimum deformity
Round Bar Shearing Capacity: 1 -1/4”.
Square Bar Shearing Capacity: 1-1/4” x 1-1/4”.
Channel Shear Maximum Capacity: 4”.
Rectangular Notcher capacity: 2-1/2” x 3-1/2” in 1/2”.
V-Notcher Capacity: 5-3/4” x 5-3/4” in 1/2”.
Pipe Notcher Capacity: 4-1/2” maximum.
Angle Iron Bending Capacity: 4” in 1/2” material.
Multi V-Press Brake: 27-1/2” in 3/16” material.
Single V-Press Brake 2” V: 1/4” material.
Single V-Press Brake 3” V: 3/8” material.
Single V-Press Brake 4” V: 1/2” material.
OTHER STANDARD EQUIPMENT
Five (5) Sets of Punches and Dies:
Punches: 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
Dies: 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
Cleveland Punch and Die: Series 26 punch, 62 die.
24 Volt DC Control Voltage
Scrap Box
Adjustable Stroke Depth
One (1) Full-Control Foot Pedal
Two (2) Hole Die Holder
Two (2) Piece Gauging Table
1/4” Square Keyed Punch Holder, for Shaped Tooling
Magnetic Base Work Light
Standard Voltage 230/460 Volt, 3 Phase, 60Hz
Machine Net Weight PM220/20: 9790 lbs.
Machine Dimensions: 77” L x 42” W x 82-1/2” H
Machine Net Weight PM220/30: 12,348 lbs.
Machine Dimensions: 96-1/2” L x 42” W x 85-1/2” H
Base Price PM220/20 Complete machine ready to
operate………………………………………….$48,825
Base Price PM220/30 Complete machine ready to
operate………………………………………….$68,775
- Page 2 -
PM22020/22030
Description
Part #
V-Notcher, (5-3/4” x 5-3/4” in 1/2”)
Press Brake Single V (2” wide V x 10” long)
Press Brake Single V (3” wide V x 10” long) (Special Order)
Press Brake Single V (4” wide V x 10” long) (Special Order)
Press Brake Multi V (3/8”, 7/16”, 5/8”, 15/16” wide V’s x 27-1/2” long)
Angle Bending (4” x 1/2”)
Hydraulic Punch Stripper (Special Order)
Copy Table (PM220/20) Max. Area 30” x 18-1/2”
Copy Table (PM220/30) Max. Area 30” x 28-1/2”
Copy Table with Hydraulic Punch Stripper (IW 135D)
Copy Table with Hydraulic Punch Stripper (IW 135DX)
Hydraulic Clamp for Copy Table
Channel Web Die Holder (Series 413 Dies)
Channel Web Die Holder (Series 419 Dies)
Oversize Punching Kit 2-1/64” to 4” Diameter Holes
Oversize Punching Kit 4-1/64” to 6” Diameter Holes
Oversize Punching Kit 6-1/64” to 8” Diameter Holes
Angle Iron Shear 3-1/2” x 3-1/2” in 1/2” material
Round and Square Bar Shear 1-1/4” Max.
Channel Shear Max. 2”
Channel Shear Max. 3”
Channel Shear Max. 4”
Rectangular Notcher 2-1/2” x 3-1/2” in 1/2”
Flat Bar Shear 6” in 5/8” material
IWA/9021300W
IWA/9023491
IWA/PB0310L
IWA/PBO410L
IWA/9023690
IWA/ABL
IWA/STBH
IWA/CT34000
IWA/CT35000
IWA/HSCT34000
IWA/HSCT35000
IWA/CT90900
IWA/A1DW
IWA/A2DW
IWA/110DDXS
IWA/110DDXM
IWA/110DDX
IWA/9007400
IWA/9009000W
IWA/CSPM20A
IWA/CSPM30A
IWA/CSPM40A
IWA/9006500W
IWA/9008000W
Pipe Notcher
3/4”
1”
1-1/4”
1-1/2”
2”
2-1/2”
3” to 4-1/2” available upon request
IWA/PN.75+100Q
IWA/PN1.00+100Q
IWA/PN1.25+100Q
IWA/PN1.50+100Q
IWA/PN2.00+100Q
IWA/PN2.50+100Q
$2,135
$1,250
$1,455
$1,660
$2,090
$1,300
$2,550
$6,785
$7,750
$10,810
$11,775
$3,215
$ 485
$ 550
$2,450
$2,090
$2,705
$1,530
$1,530
$2,090
$2,090
$2,090
$1,915
$1,530
$ 640
$ 640
$ 640
$ 640
$1,160
$1,160
Call for pricing.
Note: All notchers are for schedule 40 pipe unless otherwise indicated.
____________________________________________________________________________________________________
WARRANTY: Marvel Manufacturing Company, Inc. warrants to the original user for a period of (2) years on replacement parts and (1) year
labor from the date of factory shipment, that every new Spartan Ironworker is free from defect in material and workmanship. During that
period, we will, at our option, repair or replace any part which, upon examination, we find defective. This warranty will not apply to alterations
or modifications made upon Spartan Ironworkers without our written consent, or to machines which have been subject to willful abuse.
Prices: NET F.O.B. Factory. All prices contained herein are subject to change without notice and are further subject to an increase in price
equal to the amount of any Federal, State, or Local Tax that may be imposed. A 10% down payment is due with purchase order. A 35%
restocking charge will be assessed for all cancelled orders.
Marvel Manufacturing Company, Inc. also reserves the right to make design changes and/or modifications on machines without prior notice.
No officer, employee, representative, or agent is authorized to bind the company to acceptance of any order in the field. All orders are subject
to acceptance by the company at its home office in Oshkosh, Wisconsin. Delivery dates given are estimates only, based on prevailing
conditions and available information, and any special requirements that may affect the order are subject to conditions and contingencies
beyond our control.
_________________________________________________________________________________________________________________
Marvel Manufacturing Company, Inc. • 3501 Marvel Drive • Oshkosh, WI 54902 • U.S.A.
Phone: (920) 236-7200 (800) 472-9464 Fax: (920) 236-4156
www.marvelsaws.com
Sales & Service Centers/Warehouses
OSHKOSH, WI • 1 800 472-9464 • FAX: 1 920 236-4156
FT. WORTH, TX • 1 817 535-2183 • FAX: 1 817 531-1163
LONGVIEW, WA • 1 360 575-9917 • FAX: 1 360 575-9706
BIRMINGHAM, AL • 1 205 916-2828 • FAX: 1 205 916-2827
District Sales Managers and Technical Specialists in Major Cities