3/1/2015
Mobile and
Handheld Devices
in Classroom
Project Scope
Version 2.0
Team 11
Gangwal, Onil
Ravindran, Prajesh
Samuel, Roshni
Yu, Yuanyuan
Mobile and Handheld Devices in Classroom
Project Scope
Project Objectives
The project aims to provide integrated educational solution in educational classrooms using mobile and
handheld devices. It will leverage the advancements in technology and omnipresence of mobile devices to
use them as an additional educational tool. The project will enable the creation of a secure and private
network for the classroom. All the handheld devices can connect to this network and it will act as a virtual
classroom.
Product Requirements
A virtual classroom can be created by a class tutor and will act as owner of the classroom. Mobile devices
can be added to class room in two ways. First, the owner can manually add any device on basis of email
address. Second, anyone can request access to the class which has to be approved by the owner. The owner
would also have the ability to disable or remove any user from the classroom.
The virtual classroom will facilitate the sharing of documents and assignments by owner to students. The
system would also support submission and grading of in class assignments using mobile devices. The
classroom will also facilitate interaction and discussion between the class participants.
Deliverables
1. Requirement Definition Document
2. High Level Architecture Document
3. Initial working prototype
4. Revised Requirements Definition Document based on client feedback
5. Revised High Level Architecture Document based on client feedback
6. Detailed Test Plans
7. Tested Final Product
ISYS 630-603 Group #11
Gangwal, Ravindran, Samuel, Yu
03/1/2015
Page i
Mobile and Handheld devices in
Classroom
Project Summary.docx
Version 2.0
Mobile and Handheld Devices in Classroom
8. User Manual
9. Test Execution Results
10. Security Audit Reports
Product Acceptance Criteria
1. Completely functional product covering all requirements specified in the Requirement
Specification.
2. The final open defect count should not exceed High Severity : 0 , Medium Severity: 1, Low
Severity: 4.
3. The application should have successfully passed the performance testing criterion specified.
4. The application should have passed the Security Audit requirements.
Project assumptions
1. The students and faculty are equipped with handheld and mobile devices and have the basic
understanding of using them.
2. The classrooms are equipped with internet services i.e. Wi-Fi connectivity
Project Risks
1. The application is currently being developed only for Android and iOS platforms and hence will
not be able to scale to all types of devices which may lead to a loss in market share.
2. The faculty or students may be reluctant to the shift from the traditional forms of learning.
ISYS 630-603 Group #11
Gangwal, Ravindran, Samuel, Yu
03/1/2015
Page ii
Mobile and Handheld devices in
Classroom
Project Summary.docx
Version 2.0