Part 1:
The right technology partner for you and your customers!
www.inevtech.com
With over 200,000 Antennas sold and/or deployed
it should be obvious that we know what we are doing!
We are proud of our working relationships with our customers.
We supply some of the Largest companies in North America
but are happy to work with those in the start up phase as well.
We want to work with you and your customers to make sure
that they choose the right antenna for their project. Its what makes
or breaks their Orbcomm experience!
Our customers have units deployed GLOBALLY!!
A few InevTech FIRSTS:
1) FIRST to bring “Ruggedized” antennas to the Orbcomm
world.
2) FIRST to bring tri and quad-functional antennas (ie:
VHF+GPS+GSM+2.4GHz)
<circa: 2005> to the Orbcomm World.
3) FIRST to bring low profile antennas to
commercially acceptable price and performance levels.
4) FIRST to offer all-in-one products
(i.e.: solar cell + batteries + antenna + radio)
MPR “Bar” Antennas
Best All Round Antenna in the Marketplace:
Suited For:
Side or Front mount on trailers, containers.
Surface mount on trucks, buildings.
Pros:
- Low profile and Rugged! (Works and survives where
whip antennas and others may not.)
- Ground independent! <ie: Fibreglass roof on Truck ref:
LoJack Argnetina (use of a ground plane yields better performance.)
Performance: (on a ground plane) 87% of Reference ½
Wave Whip (Best Low Profile Antenna commercially
available!)
MPR Description
Product Description: VHF / GPS Low-profile antenna for
use with the Orbcomm satellite system.
Part No: MPR-2
GPS component contains an integrated LNA.
Antenna designed for operating in very rugged conditions
such as mobile transportation equipment. It is internally
filled with closed cell foam that seals the internal elements
from moisture and protects them from vibration and impact
trauma. (Can be used instead of ½ Wave Whip in fixed site
locations.) Bottom and End Feed versions.
Note: Either or both GSM and 2.4 GHz (WiLAN) antennas
can be added within the radome. (becomes MPR-3 or MPR-4)
Inevitable MPR Specifications
Receive band:
Transmit band:
VS WR (on
metal):
Impedance:
Power g ain:
Radiation
pattern:
Polarization:
Rated power:
C onnector:
137 – 138 MHz
148 – 150.05 MHz
< 1.5:1 within each band,
not to exceed 2.5:1
anywhere in-band
50 ohms
-1 dBi
Non-directional
Vertical
20 W continuous
BNC female bulkhead
(alternatives available by
factory order)
Inevitable's FLAT PANEL (FPA) Antenna
Suited For
Side, Front or Top mount on trailers, containers, etc.
Surface mount on trucks, buildings.
Pros
Lower profile than MPR antennas and whips. Its also
Ruggedized.
- Ground independent! (use of a ground plane yields better
performance.)
Performance (on a ground plane) ~71% of reference ½ Wave Whip
(Better than ¼ Wave Whip Antennas, yet lower profile.)
Inevitable’s FPA Antenna
Size: 8” X 10” X 2.5” (203mm X 254mm X 64mm)
Options: VHF Only, VHF+GPS, VHF+GPS+GSM
Continue to: Part 2
The right technology partner for you and your customers!
www.inevtech.com
Part 2
The right technology partner for you and your customers!
www.inevtech.com
InevTech also offers Whip Antennas...
...and Cell Band+ GPS “combo” antennas
As well as custom Plastic forming and integrated products.....
Customized Plastics Projects – Large and Small
The right technology partner for you and your customers!
www.inevtech.com