Multi-band Inter/Intra Team
Radio (AN/PRC-148)
Task
Navigate yourself though the MBITR
functions.
Properly fill the 148-MBITR.
Properly hand jam frequencies.
Perform a proper radio check.
Conditions
Class room environment.
Risk is high.
In case of a rocket attack, go down stairs to
the TOC.
Standards
Given the proper equipment, You, the
individual must successfully perform your
tasks within 10 minuets.
Equipment Inspection
• Check for any visible damages, or
anything that might cause damages to
the equipment or
personnel.
Controls, Connectors
& Indicators
5. MECHANICAL
INTERLOCK
1. INTERNAL
SPEAKER-MIC
6. PROGRAMMABLE
FUNCTION KEYS
2. 80 X 32 LCD
DISPLAY
7. PUSH-TO-TALK
SWITCH
3. KEYPAD
MODE
MENU
ESC
ENT
8. SQUELCH
DISABLE
RADIO - PTT SIDE VIEW
ALT
RADIO - FRONT VIEW
4. BATTERY
CONNECTOR
System Components
MBITR Interoperability
KL43 and KY99
ANDVT
VHF/UHF AM
Clear, VINSON
& ECCM
VHF FM
Clear, VINSON
& Fascinator
Low Band VHF
FM
Clear, VINSON &
ECCM
UHF FM
Clear & BID420
UHF FM
Clear &
Fascinator
Power up your MBITR
Make sure your ON/OFF switch is on the off
position before connecting the battery to
the radio.
Description
• 30-512 MHz AM and FM Transceiver
– VHF FM/AM
– UHF AM (Air to Ground)
– UHF FM (LOS)
– UHF FM (Public Service).
• Embedded US Type 1 COMSEC
• Transmit Output Power:
– User Selectable 0.1 - 5.0 Watts
• Emergency Beacons and GPS:
– AM Swept Tone Beacon
– GPS Interface to PLGR
• 100 Memory Programmable Channels:
Once your radio has powered up. Your
display screen will display the battery
power, the group, channel and the mode
in which the radio is currently functioning
under.
• Press GR on your Key Pad.
• By pressing GR on your Key Pad this will
bring you to your GROUP MENU.
• Select any group you would like to have
your frequency under.
• There are 10 groups in each radio.
• Each group consist of 16 channels
• There’s a total of 160 channels.
Comsec Fills
1. Simultaneously press ALT and MODE on
your key pad.
2. Using your arrow up key, circle Key Fill
and press enter.
3. Circle COMSEC and press enter.
4. Press your PTT button (Push To Talk) to
initiate your fill.
Hand Jamming Settings
1.
2.
3.
4.
Press ALT and Mode at the same time.
Circle program and press enter.
Circle Radio Config and press enter.
Using your arrow keys, circle the Portion
that you would like to change on the
Radio Config menu.
5. Once you have circled your selection,
press enter.
HAND JAMMING
6. By pressing enter your selection has been
highlighted.
7. Using your arrow keys you can now select
your desired function.
8. When typing in the frequencies, you must
press ALT and one of the arrow keys to
shift from right to left.
HAND JAMMING
Note: You must enter in your RX: Freq. first
before you type in your TX: Freq.
Questions???????????????????????????