A Glimpse Into Eaton Corporation - xSpider

This is a photographic template – your
photograph should fit precisely within this rectangle.
Eaton software tools
xSpider
Software tool for semi-automatic dimensioning
and calculation of low-voltage networks
© 2012 Eaton Corporation. All rights reserved.
xSpider
Software tool for semi-automatic dimensioning and calculation of low-voltage networks
Graphically oriented design system for
dimensioning of low-voltage networks fitted with
Eaton circuit protection equipment.
• Design of TN/TT/IT networks of various voltage
systems up to 1000 V.
• Design of radial as well as meshed networks.
• Design of networks supplied from one or more
different power supplies.
• Possibility to simulate various operating states of the
network by disconnecting power sources and loads.
• Database of components with transparent tree
structure allowing user-defined additions.
• All calculations (voltage drops, load distribution,
impedance, short circuits) are based on IEC
standards.
• Export of graphics into DXF data format.
• User-friendly interface. User operation similar to
standard CAD systems (AutoCAD).
• Stand alone software based on Windows platform.
© 2012 Eaton Corporation. All rights reserved.
2
xSpider
Software tool for semi-automatic dimensioning and calculation of low-voltage networks
Voltage drops, load distribution:
• Check whether voltage drop does not exceed the
user-defined maximum value set locally for every
network component.
• Check of correct dimensioning of the circuit
protection equipment and conductors.
Component with error
(current in the line is higher than
nominal current of c.b.)
Switch off c.b.
Voltage drop in the node
Current in the node
© 2012 Eaton Corporation. All rights reserved.
3
xSpider
Software tool for semi-automatic dimensioning and calculation of low-voltage networks
Three-phase short circuit :
• Maximal short circuit.
• Check of correct dimensioning of the circuit
protection equipment and conductors (check of
breaking capacity).
• Check of whole network or fault in one node.
Ik3p – initial impulse short circuit current
© 2012 Eaton Corporation. All rights reserved.
Ikm – peak short circuit current
Component with error
(insufficient breaking capacity)
4
xSpider
Software tool for semi-automatic dimensioning and calculation of low-voltage networks
One-phase short circuit:
• Minimal short circuit.
• Calculation of disconnection time check of compliance
with the requirements of IEC standard.
• Check of whole network or fault in one node.
Ttr – disconnection time
Node with short-circuit
© 2012 Eaton Corporation. All rights reserved.
5
xSpider
Software tool for semi-automatic dimensioning and calculation of low-voltage networks
Discrimination – comparing tripping characteristics.
• Demonstrate solution of discrimination problem between FU3.1 fuse
and FA3.1.15 circuit breaker by changing of release settings.
© 2012 Eaton Corporation. All rights reserved.
6
xSpider
Software tool for semi-automatic dimensioning and calculation of low-voltage networks
Preview of applications:
© 2012 Eaton Corporation. All rights reserved.
7
xSpider
Software tool for semi-automatic dimensioning and calculation of low-voltage networks
Solved example:
• Reference manual, chapter 25.1,
page 176.
• How a new network wiring
diagram (network topology) is
created.
• How the basic tools for working
with graphics are used.
• How the designed network is
checked.
• Solved in the
DEMO-Network.SPI file.
© 2012 Eaton Corporation. All rights reserved.
8
Eaton software tools
• A set of programs to support the design of the particular product lines:
• xSpider
•
•
•
•
•
Programs are available on CD-ROM
Programs are provided for free, including installation and basic training
Licence is provided for a limited period of time (update of programs and databases)
Manuals available in electronic form as PDF files
Technical support for implementation and troubleshooting
More information available at the address:
Eaton GmbH
Scheydgasse 42, A-1215 Wien, Austria
Tel.: +43 0 28 53 7 02-0, Fax: +43 0 28 53 7 65 09
xspider@eaton.com
http://xspider.moeller.net
© 2012 Eaton Corporation. All rights reserved.
9