What’s New
Femap 11.1.1 / 11.1.2
Unrestricted © Siemens AG 2014 All rights reserved.
Smarter decisions, better products.
Femap 11.1.1
Maintenance Release
• Error fixes
• Some minor new functionality
Unrestricted © Siemens AG 2014 All rights reserved.
Page 2
Siemens PLM Software
Femap 11.1.1
Performance Graphics Support
• Display of material and element directions on planar elements now supported
when performance graphics operations are enabled
Unrestricted © Siemens AG 2014 All rights reserved.
Page 3
Siemens PLM Software
Femap 11.1.1
Rigid Body Rotation – Coordinate System
Rotation of coordinate systems will now rotate all sub-entities as a rigid body
• Loads
• Boundary conditions
• Degrees of freedom
• Sub-coordinate systems
New Modify / Align / Coordinate System command
• Move mesh from one coordinate system to another
Unrestricted © Siemens AG 2014 All rights reserved.
Page 4
Siemens PLM Software
Femap 11.1.1
Rigid Body Rotation – Coordinate System
Modify / Rotate By / Coordinate System
Unrestricted © Siemens AG 2014 All rights reserved.
Page 5
Siemens PLM Software
Femap 11.1.1
Nastran Load Set Improvements
Dedicated temperature set definition now added to the Nastran analysis set
boundary conditions
• Load set IDs now maintained when bulk data files are cycled in and out
• Currently supported in SOLs 101, 103, 105, 106 – others to follow
• Previously you needed to manually add the temperature loads to the Femap
Load Combination or one of its referenced sets. Femap would then create a
synthetic temperature set making it possible to maintain set IDs.
Unrestricted © Siemens AG 2014 All rights reserved.
Page 6
Siemens PLM Software
Femap 11.1.1
Nastran Load Set Improvements
Improved SPCD load import with LOAD input entities
• SPCD loads are read into a synthetic Femap load set and labeled as such
• Structural loads are read into their respective sets and combined via the
Femap LOAD combination
• The synthetic SPCD set is also added as a referenced set in the Femap LOAD
combination
• LOAD entity ID is in addition to referenced structural load set IDs are
maintained
Unrestricted © Siemens AG 2014 All rights reserved.
Page 7
Siemens PLM Software
Femap 11.1.1
Geometry
• Geometry / Copy, Scale, Rotate, and Reflect commands enhanced to properly
copy and transform geometric loads with the new geometry
• Model / Copy, Scale, Rotate, and Reflect commands similarly enhanced to
properly work with non-rectangular load coordinate systems
• Geometry / Copy, Scale, Rotate, and Reflect enhanced to properly copy
geometric constraints that either reference DOFs in a specific coordinate
system, or that allow sliding along a specified direction
Unrestricted © Siemens AG 2014 All rights reserved.
Page 8
Siemens PLM Software
Femap 11.1.1
Geometry
Geometry / Solid / Fill Hole command updates
• Allows you to create a solid from the hole within another solid
File / Merge command updates
• Geometric entities can now be included in merging operations in addition to
FEM entities
Unrestricted © Siemens AG 2014 All rights reserved.
Page 9
Siemens PLM Software
Femap 11.1.1
Modify Node – Project Along Vector
• Modify / Project / Point-Node along a vector onto surfaces command modified
to better handle large numbers of entities projected onto a large number of
surfaces
• Resulting command execution speedup reduces from hours to minutes
Unrestricted © Siemens AG 2014 All rights reserved.
Page 10
Siemens PLM Software
Femap 11.1.1
Preprocessing: Model / Load/ From Free Body
Free body loads from one model can now be transferred and included in another
model and installed using RBE3 elements
Free body loads copied from global model:
Unrestricted © Siemens AG 2014 All rights reserved.
Page 11
Siemens PLM Software
Femap 11.1.1
Preprocessing: Model / Load/ From Free Body
Free body loads copied into local model with RBE3 elements:
Unrestricted © Siemens AG 2014 All rights reserved.
Page 12
Siemens PLM Software
Femap 11.1.1
Beam Postprocessing
Publish beam cross section calculator API
• Expose beam postprocessing engine
• Recover mesh locations
• Recover stress values calculated at
cross section nodes
• Allow users to postprocess well
beyond standard FEA beam results
Unrestricted © Siemens AG 2014 All rights reserved.
Page 13
Siemens PLM Software
Femap 11.1.1
Application Programming Interface Updates
Stop API Tool command on the Custom Tools toolbar
• Stops the currently running API program even when the interface is locked in
current API calls
Various new and updated API calls
• Refer to What’s New in version 11.1.1 in the online help for full details
Unrestricted © Siemens AG 2014 All rights reserved.
Page 14
Siemens PLM Software
Femap 11.1.2
Maintenance Release
• Principally error fixes
• Some minor new functionality
• NX Nastran 9.1 included
Unrestricted © Siemens AG 2014 All rights reserved.
Page 15
Siemens PLM Software
Femap 11.1.2
Composite Layups
Layup representation display includes:
• Layup title
• Number of plies
• Total thickness
Unrestricted © Siemens AG 2014 All rights reserved.
Page 16
Siemens PLM Software
Femap 11.1.2
Performance Graphics Support
• Trace Deformation Style now supported when performance graphics
operations are enabled
Unrestricted © Siemens AG 2014 All rights reserved.
Page 17
Siemens PLM Software
Femap 11.1.2
Element Quality Checks - Pyramids
Jacobian element quality check updated for pyramid elements:
• 0.0 (ideal) to 1.0 (poor)
• 2.0 indicates the element has failed the Jacobian check
Unrestricted © Siemens AG 2014 All rights reserved.
Page 18
Siemens PLM Software
Femap 11.1.2
Geometry Measure and Load Expansion
• Measure Between Geometry command expanded to support basic Femap
curves – previously just Solid curves were supported
• Sheet solid determination methodology updated
• Load expansion times for large models with many non-manifold surfaces and
equation based pressure loads reduced from hours to seconds
Unrestricted © Siemens AG 2014 All rights reserved.
Page 19
Siemens PLM Software