Lock Replacement
Step 1:
Cut insulation behind lock mechanism.
Step 2:
After insulation is cut, the nut behind the lock will be revealed. Next you want to remove the nut be
screwing in a counter-clockwise direction
Step 3:
Damaged lock is now removed. Insert new lock through Front.
Step 4:
Begin tightening nut behind the new lock, its easier to start with your fingers, then completely tighten with plyers or
wrench.
Step 5:
Now that new lock is secure, place Chrome tape over the hole that you cut to remove lock. If there
are any issues with new lock, Please contact: Tech support @ 866-599-0214