Hero Me Gen7 Printhead Platform July 14th, 2023 Hero Me Gen7.4 Printhead Platform The Hero Me is an advanced printhead platform for 3D printers. The design concepts behind the Hero Me were to greatly improve print quality and part cooling performance, lower overall printhead weight, AND make a very modular system. The Hero Me is to support as many different brands and models of 3D printers as possible, along with dozens of hot-ends and extruders, ABLs, fans, and other add-ons. After five years and seven generations, the Hero Me has been downloaded over a half million times. With tens of thousands of installs and satisfied makers, Hero Me has delivered. Hero Me’s standardized modularity has enabled the creation of over 700 different add-ons and remixes by individual makers to customize the Hero Me to their specific needs. Hero Me Gen7 Release 4 continues with these design principles and brings many design improvements, supporting many new printers and printhead components while maintaining broad backward compatibility with previous generations. The flexibility of the Hero Me Gen7 also makes it future proof, enabling easy printhead upgrades with matching STLs for each new component. The Hero Me also supports advanced tool swap systems including the Wham Bam MUTANT, PrinterMods Xchange, and the BigTreeTech HermitCrab. The Hero Me Gen7 is the top aftermarket printhead assembly and part cooling system available and just happens to be open source. Version 4.1 © 2020-2023 Andrew Soderberg – merlinmedia.com All Rights Reserved Hero Me Gen7 Printhead Platform July 14th, 2023 Hero Me Gen7.4 now supports over 115 3D Printer models (plus clones), 47 Hotends, 37 Extruders (over 50 mount options), 20 ABL Sensors, 35 Part Cooling Duct options, 22 Cable Management options, 14 ADXL345 mounts, and 8 LED bar mounts. With all these options the Hero Me Gen7.4 most likely has the parts you need for your specific printer setup. If you would like documentation to help you select and assemble the Hero Me Gen7.4 for your specific 3D printer, you can get a membership plan on Thangs.com or Patreon.com. With the All-Access Plan, you will get a detailed 56-page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here: https://thangs.com/designer/MediaMan3D?plans=true or here: https://www.patreon.com/MediaMan3D Happy Printing! Andy – MediaMan3D Email: Web: Patreon: Printables: Thangs: Thingiverse: YouTube: Hero Me Swag: MediaMan3D@gmail.com https://merlinmedia.com https://patreon.com/MediaMan3D https://printables.com/model/39322 https://thangs.com/designer/MediaMan3D https://www.thingiverse.com/mediaman/designs https://youtube.com/@MediaMan3D https://hero-me-shop.creator-spring.com Version 4.1 © 2020-2023 Andrew Soderberg – merlinmedia.com All Rights Reserved