Uploaded by emailbenedetto

750FT Borehole SAMPLE 2023

advertisement
L OF QUANTITIES FOR DEEP 750FT BOREHOLE DRILLING WITH THICK HDPE CASING
ITEM
DESCRIPTION
PRELIMINARIES
1
Mobilize to site all necessary equipment, materials and personnel and demobilize on completion.
(a)
Prepare site for drilling including
(b)
Setting up of rig, construction of mud pit etc. and dismantling and cleaning up of site on completion
(c)
Make provision of stabilizing the soft ground at the rig position with concrete to prevent sinking
SUB-TOTAL-PRELIMINARIES
(Carried to summary)
QTY
UNIT
L.S
L.S
L.S
RATE(N)
AMOUNT(N)
150,000
450,000
150,000
150,000
450,000
150,000
750,000
www.edlinetech.com
2.
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
3.
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(l)
BOREHOLE CONSTRUCTION
Drill 350mm hole to accommodate 250mm diameter conductor casing
Supply and install 300mm conductor casing
Drill 250mm diameter borehole in
sedimentary formation to accommodate installation of 140mm diameter casing pipe
Carrying out test and submit borehole report
Supply and install 140mm diameter HDPE casing pipe to API standard
Supply and install 140mm diameter HDPE screens (16 bar)
Supply and install casing aligning tool
Supply and install gravel pack materials around the screen area and 5m above the top screen
SUB-TOTAL-BOREHOLE CONSTRUCTION (carried summary)
BOREHOLE COMPLETION
Complete backfilling, sealing and cement grouting of upper part of borehole down to 8m from ground level
Carryout borehole alignment test
Carryout verticality test
Develop borehole by back washing and jetting
Develop borehole by airlifting with a compressor
Develop borehole by over pumping until water is clear and sand free
Supply and install of stainless steel
submersible pump capable of delivering 10m3/hr at 60m Head complete with control panel and drop cable
Supply and install 50mm diameter threaded riser pipes
Construct and paint well head complete with fittings and 0.5m × 0.5m × 0.5m concrete pad
Carryout a constant rate pumping to determine the yield of the borehole after development
Collect and analyse water sample
( chemical and bacteriological)
Disinfect pump, risers and borehole with chlorine
30
30
220
L,S
200
12
1
DESCRIPTION
Preliminaries
Borehole construction
Borehole completion
TOTAL
Add 7.5 vat
Total cost
30,000
15,000
40,000
300,000
15,000
40,000
45,500
65,000
900,000
300,000
8,800,000
300,000
3,000,000
480,000
45,500
65,000
13,890,500
Hr
L.S
L.S
L.S
6
Hr
1
60
2
6
L.S
No
M
L.S
Hr
L.S
L.S
B0REHOLE COMPLETION
(carried to summary)
SUMMARY
ITEM
1
2
3
M
M
M
L.S
M
M
No
L.S
80,000
90,000
20,000
80,000
90,000
120,000
30,000
80,000
500
24,000
50,000
40,000
00,000
180,000
80,000
000
30,000
24,000
50,000
40,000
00,000
1,384,000
AMOUNT
600,000
12,030,000
1,384,000
14,014,000
14,014,000
Download