Platform
Equipment ID
Equipment Description
Equipment Make/Model
Type of Lubricant Oil
Equipment Information
SAMUR
SAMUR GT-48-01A
GAS TURBINE GENERATOR
-/ISO VG 32
Sample Information
Sample No
Bottle No
Report Date (dd/mm/yy)
Date Received (dd/mm/yy)
Sampling Date (ddmm/yy)
Equipment Life (Hours)
Oil Life (Hours)
Oil Top Up (Litres)
Lubricant Condition Rating
Trend Graph
250.00
200.00
OC1909873
213041
01-10-2019
12-09-2019
12-09-2019
-
150.00
100.00
50.00
0.00
CAUTION
Appearance
ITS Comments
High particle counts. Check and service filter. Improve filter efficiency to remove the dirt particles in oil. Improve breather
efficiency if possible.
Test Name
Appearance
Viscosity, cSt@40 C, cSt
Flashpoint, PMCC, °C
Total Acid Number, mgKOH/g
Water Content (Coulumetric), wt%
Pentane Insolubles, wt%
Contaminant Additives
Wear Metals
Particle Count (counts / 100mL)
5 - 15 microns
15 - 25 microns
25 - 50 microns
50 - 100 microns
100+ microns
NAS 1638 code
Particle Count (counts / mL)
> 4 microns
> 6 microns
> 14 microns
> 21 microns
> 38 microns
> 70 microns
ISO 4406:99 code
Iron
Copper
Lead
Tin
Aluminium
Chromium
Nickel
Silver
Vanadium
Magnesium
Phosphorus
Zinc
Calcium
Silicon
Sodium
Molybdenum
Barium
Boron
Results
Test Method
Oil Physical Properties
Visual
ASTM D7279
ASTM D93
ASTM D664
Contamination
ASTM D6304C
ASTM D893
Particle Count
Viscosity, cSt@40 C, cSt
Flashpoint, PMCC, °C
BASELINE
Dark Brown Opaque
34.64
226.0
0.17
BASELINE
<0.01
0.07
BASELINE
ALARM LIMIT
ACTION
CAUTION
UC
LC
UA
<180
>1.80
>2.00
ACTION
CAUTION
>0.05
>0.50
>2.00
>3.00
TARGET CLEANILESS
LA
-
Light Obscuration
Light Obscuration
Light Obscuration
Light Obscuration
Light Obscuration
Light Obscuration
547440
28880
9107
1973
453
12
>8
>12
Light Obscuration
Light Obscuration
Light Obscuration
Light Obscuration
Light Obscuration
Light Obscuration
Light Obscuration
Elemental Analysis (in ppm)
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
ASTM D5185
27849
7231
360
138
14
1
22/20/16
ISO more than xx/18/14
CAUTION
50
50
40
20
20
30
20
100
20
30
-
ISO more than xx/23/17
ACTION
100
100
50
50
30
50
30
150
100
50
-
BASELINE
<1
<1
<1
<1
<1
<1
<1
<1
<1
6
21
4
5
1
<1
<1
<1
<1
Intertek Testing Services Singapore, OCM
This report (including any enclosures and attachments) is prepared for the exclusive use of the Customer named in the report and solely for the purpose for which it is provided in the agreement. The reported result(s) relate only to the sample(s) tested in accordance with the instruction of Customer and provide no warranty or verification on the sample(s)
representing any specific goods, material and/or shipment and are not intended to be a recommendation for any particular course of action. Customer is responsible for acting as it sees fit on the basis of such result(s). This report does not discharge or release the Customer (being as factory/sellers/suppliers) from their commercial, legal or contractual
obligations with buyers or end-users in respect of products provided by the Customer. Unless Intertek provide or express prior written consent, no part of this report should be reproduced, distributed or communicated to any third party. Intertek do not accept any liability if this report is used for an alternative purpose from which it is intended, nor do Intertek
owe any duty of care to any third party in respect of this report. Except where explicitly agreed in writing, all work and services performed is governed by Intertek General Terms and Conditions of Services (Global) which is available on request or can be obtained at http://www.intertek.com/terms.
Viscosity Range for: