Uploaded by msm.online.lecture2

broad midterm 2010

advertisement
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
What is the minimum operating schedule for an AM station
broadcasting at day time?
What is the maximum allowable power for STL’s?
A collector-modulated transmitter has a supply voltage of
240V and a collector current of 0.5A. The modulator power for
an 80% efficient amplifier is:
___ are used to help predict or design for a space with a
desired reverberation response
If an FM transmitter has two doublers and one tripler, what is
the carrier swing when the oscillator deviates 2kHz?
Calculate the intensity of a sound at a distance of 8m from a
uniformly radiating source of 2 watt power.
90kHz tone is how many octaves higher than a 300 Hz tone?
The first symbol and the third in the ITU emission designation
refers to:
Protection ratio for 1st adjacency in FM broadcasting is:
Calculate the image frequency for standard AM broadcast
band receiver and tuned to 650kHz.
What is the frequency of the 294th channel in FM
broadcasting spectrum?
A supersonic has a Ma number of between:
When modulation is accomplished at the output of the last
radio stage in the transmitter, it’s referred to as:
A 55-year old person will have a presbycusis loss of about
____ with a k of 8.
Station identification announcement broadcast the station’s
____, ____ and ____.
What is the velocity of sound in dry air for a temperature
change of 12C?
The subjected unit of pitch is:
The formula used for actual reverberation time computation
with an average absorption greater than 0.2 is:
What are the three type of absorber?
An AM signal has the following characteristics; the carrier
frequency is 150MHz; the modulating signal frequency is
3KHz; the carrier voltage is 60V, where the modulating signal
is 30V. Find the peak voltage of the lower side frequency.
What class of FM station is allowed in Metro Manila and
Metro Cebu under KBP technical standards and regulations?
The maximum power in kW allowed in Metro Manila for AM
broadcasting station is:
1.
What is the minimum operating schedule for an AM station
broadcasting at day time?
What is the maximum allowable power for STL’s?
A collector-modulated transmitter has a supply voltage of
240V and a collector current of 0.5A. The modulator power for
an 80% efficient amplifier is:
___ are used to help predict or design for a space with a
desired reverberation response
If an FM transmitter has two doublers and one tripler, what is
the carrier swing when the oscillator deviates 2kHz?
Calculate the intensity of a sound at a distance of 8m from a
uniformly radiating source of 2 watt power.
90kHz tone is how many octaves higher than a 300 Hz tone?
The first symbol and the third in the ITU emission designation
refers to:
Protection ratio for 1st adjacency in FM broadcasting is:
Calculate the image frequency for standard AM broadcast
band receiver and tuned to 650kHz.
What is the frequency of the 269th channel in FM
broadcasting spectrum?
A supersonic has a Ma number of between:
When modulation is accomplished at the output of the last
radio stage in the transmitter, it’s referred to as:
A 55-year old person will have a presbycusis loss of about
____ with a k of 8.
Station identification announcement broadcast the station’s
____, ____ and ____.
What is the velocity of sound in dry air for a temperature
change of 12C?
The subjected unit of pitch is:
The formula used for actual reverberation time computation
with an average absorption greater than 0.2 is:
What are the three type of absorber?
An AM signal has the following characteristics; the carrier
frequency is 150MHz; the modulating signal frequency is
3KHz; the carrier voltage is 60V, where the modulating signal
is 30V. Find the peak voltage of the lower side frequency.
What class of FM station is allowed in Metro Manila and
Metro Cebu under KBP technical standards and regulations?
The maximum power in kW allowed in Metro Manila for AM
broadcasting station is:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
What is the minimum operating schedule for an AM station
broadcasting at day time?
What is the maximum allowable power for STL’s?
A collector-modulated transmitter has a supply voltage of
240V and a collector current of 0.5A. The modulator power for
an 80% efficient amplifier is:
___ are used to help predict or design for a space with a
desired reverberation response
If an FM transmitter has two doublers and one tripler, what is
the carrier swing when the oscillator deviates 2kHz?
Calculate the intensity of a sound at a distance of 8m from a
uniformly radiating source of 2 watt power.
90kHz tone is how many octaves higher than a 300 Hz tone?
The first symbol and the third in the ITU emission designation
refers to:
Protection ratio for 1st adjacency in FM broadcasting is:
Calculate the image frequency for standard AM broadcast
band receiver and tuned to 650kHz.
What is the frequency of the 269th channel in FM
broadcasting spectrum?
A supersonic has a Ma number of between:
When modulation is accomplished at the output of the last
radio stage in the transmitter, it’s referred to as:
A 55-year old person will have a presbycusis loss of about
____ with a k of 8.
Station identification announcement broadcast the station’s
____, ____ and ____.
What is the velocity of sound in dry air for a temperature
change of 12C?
The subjected unit of pitch is:
The formula used for actual reverberation time computation
with an average absorption greater than 0.2 is:
What are the three type of absorber?
An AM signal has the following characteristics; the carrier
frequency is 150MHz; the modulating signal frequency is
3KHz; the carrier voltage is 60V, where the modulating signal
is 30V. Find the peak voltage of the lower side frequency.
What class of FM station is allowed in Metro Manila and
Metro Cebu under KBP technical standards and regulations?
The maximum power in kW allowed in Metro Manila for AM
broadcasting station is:
What is the minimum operating schedule for an AM station
broadcasting at day time?
What is the maximum allowable power for STL’s?
A collector-modulated transmitter has a supply voltage of
240V and a collector current of 0.5A. The modulator power for
an 80% efficient amplifier is:
___ are used to help predict or design for a space with a
desired reverberation response
If an FM transmitter has two doublers and one tripler, what is
the carrier swing when the oscillator deviates 2kHz?
Calculate the intensity of a sound at a distance of 8m from a
uniformly radiating source of 2 watt power.
90kHz tone is how many octaves higher than a 300 Hz tone?
The first symbol and the third in the ITU emission designation
refers to:
Protection ratio for 1st adjacency in FM broadcasting is:
Calculate the image frequency for standard AM broadcast
band receiver and tuned to 650kHz.
What is the frequency of the 269th channel in FM
broadcasting spectrum?
A supersonic has a Ma number of between:
When modulation is accomplished at the output of the last
radio stage in the transmitter, it’s referred to as:
A 55-year old person will have a presbycusis loss of about
____ with a k of 8.
Station identification announcement broadcast the station’s
____, ____ and ____.
What is the velocity of sound in dry air for a temperature
change of 12C?
The subjected unit of pitch is:
The formula used for actual reverberation time computation
with an average absorption greater than 0.2 is:
What are the three type of absorber?
An AM signal has the following characteristics; the carrier
frequency is 150MHz; the modulating signal frequency is
3KHz; the carrier voltage is 60V, where the modulating signal
is 30V. Find the peak voltage of the lower side frequency.
What class of FM station is allowed in Metro Manila and
Metro Cebu under KBP technical standards and regulations?
The maximum power in kW allowed in Metro Manila for AM
broadcasting station is:
Download