This Electrical Product
MUST be recycled.
Replace any cracked
protective shield
66
IK
07
Isolate from the mains supply before
installation and any maintenance
1)
2) Installation by Qualified Person Only
3) Maintenance by authorized person only
Product Dimensions (mm)
Fixture Housing
Frame
Mounting Bracket
Glass
L- Line
N- Neutral
E- Earth
Cable Gland
GENERAL VIEW
E
Mounting Options
N
L
Mounting Positions
STEP-1
STEP-2
Fasten M6
Hex Bolt
Bolt Size
M10X30
Mounting Screws
with Bracket
After tightening make sure luminaire will not fall off.
CAUTION :STEP-3
1. Warranty void if IP66 or higher rating Junction Box is not used for
electrical connection.
IP66 Junction
Box
2. Make sure that voltage is within the permissible range.
3. Switch off the power supply before installation.
4. The Luminaire should be installed by a certified electrician.
INSTALLATION INSTRUCTIONS :-
Wire
1. Available in ground- mounting, wall- mounting installation.
L-LINE
E-EARTH
N-NEUTRAL
2. The Rotation angle of the Bracket is up 0° to 360° degrees.
3. Install the floodlight onto the ground, wall fix it with M10 mounting bolt.
Mains Supply
4. Then connect it with power, Installation is finished.
5. Fixture classified Class I, External earthing required while connection.
*DISCLAIMER: Images shown above are for reference purpose only and may change without notice .
This Electrical Product
MUST be recycled.
Pictures and diagrams in this IM are for illustrative purpose only.