Verify LAC / RAC / CELULA / ServiceArea Check the LAC Check the RAC Print the LAC of UtranCell Print the LAC of a cell Print the Service Area Print the Service Area from cell Synchronism Check the sinc data Check the sinc data Sync Status Ping through RNC to Server Check the O&M NODE IP Print the signaling node IP´s Print the control IP´s and User Plane IP Print all MO´s with IP´s Print the ET-MFG Slots Print the DefaultRouter IP´s Print the destination IP´s Print AAL2 address of node Print AAL2 address status Print AAL2 address destination PointCode/ Link Set /SSN Check the node PointCode Check all destPointCode Check all destPointCode get . pointcode Check the SSN SS7 Signalling Link Set (ATM) Check all Mtp3b connections Check all SccpAp connections Print all MO related to Ranap (RNC–SERVER & RNC-SGSN) Print all MO related to Rnsap (RNC – RNC) Alarms alarms with time alarm list alarmes with details E1 Optical Fibers Print E1s status Print the created PPs Print the protected boards ATM Connections Check the AAL5 Check the AAL2 Check the AAL0 Check the VPs Check the VCs print features Status of Features Status and keyed Emergency state and Finger Print Print Sequence Number and Finger Print Get traffic descriptors for all VclTp(s) Get VcpTp(s) used by all cross-connections Get piutype for all MO's under "Equipment" Get attenuation values for all cables (in RBS) View which cells are connected to which iub's (in RNC) get all attributes from nodebfunction MO, except those matching "overloa View all core network interface stacks View all MO's linked to Ranap=cs To check Board Status :the temperature same as cab but without same as cab plus led and hw info for the XP boards (eg: TMA, MCPA, Fans, etc.) same as cab but plus MP/BP processor load same as cab plus list of programs running in all MP/BP prints all MP/BP restarts.Abnormal restarts are shown in red prints only abnormal MP/BP restarts print disk usage. Disks that are getting over a certain limit will appear in color. The limit can be defined in cabview file. print MP/BP HW error print MP/BP usageof devices . Display stateRAM and memory configuration Common Channels Dedicated Channels Packet Data Router Common Channels for Soft Handover show all crossconnections Show all VP BASIC Commands Monitor VSWR RRU temperature test Check the RNC/NODEB software version Check CPU load Get signallingPointCode and destPointCode To get the time and date To get the alarms in RNC with Time and date To get the status of Site and detail of site like GPB Module number,Link Status,status of Cell,ETM Port. T Get the type of board,software allocation and magzine number To get the nodeSystemClock and it should be in lock mode To Verify that both RANAP to MSC and SGSN are enabled. To Verify that all Iub Links are enabled. To ge the RNC Module detail To get the GPB & SPB Pool To get Transport network redundancy To Get the call detail Block/Deblock any Board To get the proxy of all boards To Block the board To Deblock the board Get the OPC and DPC and VP VC Details To get the OPC To get the DPC To print the detail of the link To print the detail of the link To get the NNISAALTP detail To get the AAL devices The f option ("fast") is for printing without fetching the data of particular nodeB (Hardware info from all boards) (List of active Ue's in node) Set of Printouts from Central MPs (Snapshot of spas HW information) (FTC status) (Lists current configuration version) (Lists all configuration versions on the node) Set of Printouts from All Boards bs –g –c "te log read" bs –g -c "sma –all" bs –g –c "llog –l" bs –g –c vii lhsh lhsh lhsh lhsh <ModuleMP> <ModuleMP> <ModuleMP> <ModuleMP> ue_poolinfo drh_dcrh_topdata all drh_ccrh_topdata all drh_pdrrh all or bs -g -c "drh_pdrrh all" Run the following DRH command on the RANAP MP: > lhsh <board> drhcendh > lhsh <board> drhcendh cc > lhsh <board> drhcendh dc > lhsh <board> drhcendh pdr Note: <board> in the printout refers to the active RANAP board. Collect Status of Cells or Channels > > > > str ced st all dis lkra RANAP issues > > > > > > lhsh lhsh lhsh lhsh lhsh lhsh <board> <board> <board> <board> <board> <board> ranap dumpRoTable rncss_ranap ranap dumpRoTable survey ranap status ranap conn te e trace3 trace7 rnhRanapRouterC Note: <board> in the printout refers to the active RANAP board. lhsh 001700 arealist cell all for RANAP over SIGTRAN issues collect the output from the following commands: > > > > > lhsh lhsh lhsh lhsh lhsh <board> <board> <Active <board> <board> rof_config rof_assoc_info Core MP board> sccadm_info sctphost_info –config sctphost_stat –ovl RNSAP issues > > > > lhsh lhsh lhsh lhsh <board> <board> <board> <board> rnsap rnsap rnsap rnsap dumpRoTable status conn dumpRoTable survey lgn -m 3 lgn -m 3 -n lgd -m 30 lgd lga –m 1 lgae -m 3h lgo -m 5m lgs -m 5 –p 3 lgs –s 20080220.0700 –e 20080221.1400 alt | grep –i xxxx lga | grep -i xxxx pmr pmr -m 5 pmr -s 20101220.1900 -e 20101220.2000 lget <Site Name> primarys get <utrancell= > lget all pointc lk rnsap st rnsap lk ranap st ranap get <ucell> primaryscramblingcode|uarfcndl get iublink=<iublink> lst iublink=<iublink> lk <iublink> st utrancell=<utrancell> lst utrancell=<utrancell> get . primaryscramblingcode get 0 get . noofradiolinks lkr cab Print in different way cab lst InternalLinkGroup lk InternalLinkGroup get InternalLinkGroup l+ l? ls+ s? s1) 2) 3) 4) 5) 6) 7) 8) 9) 10) lst plugin lst plugin disable lst sctp disable lst gigabitethernet disable lbl [ldn] ldeb [ldn] lst plugin lst plugin disable lst sctp disable lst gigabitethernet disable - View all card status - View all disabled card - View all disabled sctp associations - View all disabled giga links - Link lock the card( along with child MO) - Link unlock the card ( along with child MO) - View all card status - View all disabled card - View all disabled sctp associations - View all disabled giga links Lget locationArea lac lget routingarea rac Lget . location lget CELLNAME location Lget . servicearea lget CELLNAME servicearea KGET SYNCHRO LKO SYNCHRO LST SYN ipac_ping -d 10.129.21.24 -z 10.128.239.12 -s 64 ifconfig get IpAccessHostGpb get ipa ip lget ipsystem lpr ipinterface get ipinterface get M3uAssociation lget Aal2Sp a2ea Lst aal2sp get Aal2RoutingCase lget Mtp3bSpItu=1 PointCode get mtp code lget Mtp3bSrs PointCode own point code lget SccpApRemote ssn get Mtp3bSls lst mtp lst sccp lst ranap lst Rnsap ALT AL ALA For ATM For ATM For ATM lst os155 lst pp Lst mspg lst aal5 lst aal2 lst aal0 lst vp lst vc hget feature featureState|licenseState get feature license server license lkf get vc trafficdes get cross vc lget equip piutype get cable atten get cell iub get nodebfunc !overload lk mtp3bsls lk ranap=cs cabt cabx cabl cabs cabr caba cabd cabg Cabm Std CC DC PDR IurCC stc STV lh ru fui get vswr lh ru fui get devstat Pr pack capi tot lget all pointc readclock alt strt bor get synchronization=1 st Ranap lst Iublink bp mod lh mod drh_dcrh_topdata lpr mspg uer st plug bl <proxy id> deb <proxy id> get mtp3bspitu get mtp3bsrs pr mtp3bspitu pr mtp3bsrs get <proxy of MSC/SGSN> get nnisaaltp=cs strt strtf | grep <nodeB> bs –g –c "pboot show parameters" lhsh 000700 ueregprint all spashwinfo all mirror stat cv cu cv ls (Trace and error log) (RPU status) (Restart log on each board) (Board optical indicator status) (Ueh procedure pool information) (DcDevice usage) (CcDevice usage (PacketDataRouter information) (Cell availability information) (Print celldata) (List all disabled MOs in RNC) (Print RNC Iub resources allocation) (Ranap configuration information) (Stack usage information) (Survey of RoTable for RANAP) (Ranap status information) (number of active connections) (Configuration information) (Associations) (Associations) (RNSAP configuration information) (Check RNSAP status) (Check RNSAP connections) (Print the survey of RoTable for RNSAP) Shows all moshell commands executed on a particular node by all users(last 3 days) Shows all moshell commands executed on any node by all users Node downtime and partial outages chek last down logs of 'last day ---> last 3 hrs ---> last 5 minutes ---> starting from 5 days ago and 3 days forward --> between these two timestamps << to check current alarms related to our site << to check alarms history on of the site : will show statistics : will show statistics last 5 hrs : To find sector scrambling codes for site. Complete data of cell Get signallingPointCode and destPointCode get all Iur data get all Iu data Status of all linked MOs of a iub status of RBS status of RBS get the scrambling code of all RBS To get RNC/RBS type run it in RBS and get no of calls in all sector display the repartition of IubLinks and UtranCells across rncModules and Subracks - h: prints MP/BP HW info and led status, MP temperature, and coreMgr status. If no options are given then this is the default o - t: same as above but without the temperature - x: same as cab/cabh plus led and hw info for the XP boards (eg: TMA, MCPA, Fans, etc.) - s: same as cab/cabh plus list of programs running in all MP/BP - l: MP/BP/SP processor load - r: prints all MP/BP restarts grouped by board. To see this info in chronological order, use the command "lgg". - a: prints only abnormal MP/BP restarts. - d: print disk usage. Disks that are getting over a certain limit will appear in color. - f: print disk and flash usage. - g: print MP/BP HW errors (e.g. faulty disk, faulty RAM, etc). - m: print MP/BP RAM memory usage. - e: print MP/BP added T&E trace conditions. Superceded by "fte s" command. Type "h fte" for info. To check ISL start logfile in moshell check weather logfile creating or nt End logfile sorting the MO check weather sorting activate or nt End the sorting of MO - View all card status - View all disabled card - View all disabled sctp associations View all disabled giga links - Link lock the card( along with child MO) - Link unlock the card ( along with child MO) - View all card status - View all disabled card - View all disabled sctp associations View all disabled giga links given then this is the default option. mmand "lgg". IpAccessHostEt lst get ETIPG exchange terminal status detail To ping any core IP from RNC use GPB C2 IP >lst ipaccesshostgpb >get 4403 find IP > ipac_ping -z 10.128.4.234 -d 10.59.21.1 -c 5 DATE DEL _2G BCCH Missing KOL 2G BCCH Missing MUM 2G BCCH Missing PNB 2G BCCH Missing 1st 2nd 3rd 4th 5th JAN DEC 215 224 305 296 557 239 413 197 JAN DEC 71 662 98 945 2317 990 2332 551 JAN DEC 174 117 5688 0 4461 249 4314 232 JAN DEC 285 0 285 298 512 254 598 0 6th 7th 8th 9th 396 223 497 163 421 240 545 195 2414 537 2360 589 2325 837 2361 1041 3231 236 4311 244 401 228 468 247 453 266 372 143
