Stranded Loose Tube Cable with Aluminum Tape (GYTA) Description In the GYTA cable, single-mode/multimode fibres are positioned in the loose tubes, which are made of high modulus plastic materials, while the loose tubes strand together around metallic central strength member into a compact and circular cable core. For certain high fibre count cables, the strength member would be covered with polyethylene (PE). The water-blocking materials are distributed into interstices of the cable core,and the Aluminum Polyethylene Laminate (APL) is longitudinally applied around the cable core before a PE sheath is extruded over it. Characteristics Excellent mechanical and temperature performance guaranteed by the accurate excess fibre length Critical protection to fibres, based on the excellent hydrolysis resistance and strength performance of tube material and special filling compound filled in the tube Excellent ultraviolet prevention with PE sheath The following measures are taken to ensure the water blocking performance of the cable: - Single steel wire used as the central strength member - Special water-blocking filling compound in the loose tube - 100% cable core filling - APL moisture barrier Storing temperature:-40℃ to +70℃ Operating temperature:-40℃ to +70℃ Bending radius: Static 10×D Dynamic 20×D Application: Duct/Aerial YANGT E OPTICAL FIBRE AND CABLE JOINT STOCK LIMITED COMPANY No.9 Optics Valley Avenue, Wuhan, Hubei, China(P.C.: 430073) Phone: +86 400-991-6698 Email: marketing@yofc.com www.khomax.com /www.yofc.com Stranded Loose Tube Cable with Aluminum Tape (GYTA) Cable Type Fibre Count Tubes Max. No. of Cable Cable Tensile Strength Crush Resistance + Fibres in Diameter Weight Long/Short Term Long/Short Term Fillers Tube mm kg/km N N/100 mm (increased by 2 fibres) GYTA-2~30Xn 2~30 5 6 9.2 85 600/1500 300/1000 GYTA-32~36Xn 32~36 6 6 10.2 107 600/1500 300/1000 GYTA-38~60Xn 38~60 5 12 10.4 110 600/1500 300/1000 GYTA-62~72Xn 62~72 6 12 11.4 130 600/1500 300/1000 GYTA-74~96Xn 74~96 8 12 13.6 165 600/1500 300/1000 GYTA-98~120Xn 98~120 10 12 14.8 195 600/2000 300/1000 GYTA-122~144Xn 122~144 12 12 16.4 236 600/2500 300/1000 GYTA-146~216Xn 146~216 18 12 16.4 232 600/2500 300/1000 GYTA-218~288Xn 218~288 24 12 20.0 300 1000/3000 300/1000 Note: 1.Suffix Xn denotes fibre type and see details in YOFC cable coding illustration. 2.The colour arrangement of fibre and tube is specified in colour identification table. 3.The normal PE sheath thickness is 1.8mm. Fibre Fibre PE Sheath PE Sheath Cable Filling Compound Cable Filling Compound APL APL Loose Tube Loose Tube Tube Filling Compound Tube Filling Compound Strength Member Strength Member Figure 1 GYTA-30Xn Figure 2 GYTA-36Xn Fibre Fibre PE Sheath PE Sheath Tube Filling Compound Cable Filling Compound PE Sheath PE Sheath Cable Filling Compound Tube Filling Compound APL APL Loose Tube Strength Member Loose Tube Strength Member Figure 3 GYTA-96Xn Figure 4 GYTA-216Xn YANGT E OPTICAL FIBRE AND CABLE JOINT STOCK LIMITED COMPANY No.9 Optics Valley Avenue, Wuhan, Hubei, China(P.C.: 430073) Phone: +86 400-991-6698 Email: marketing@yofc.com www.khomax.com /www.yofc.com 50/125µm Multimode Fibre Characteristics Conditions Specified Values Units 50± 2.5 [µm] [%] Geometry Characteristics Core Diameter Core Non-Circularity :,;;;5.0 Cladding Diameter 125.0± 1.0 [µm] [%] Coating Diameter 245± 7 Coating/Cladding Concentricity Error :,;;;10.0 [µm] [µm] Cladding Non-Circularity [%] Coating Non-Circularity Core/Cladding Concentricity Error :,;;;1.5 Delivery Length Up to 17.6 [µm] [km/reel] Optical Characteristics Attenuation Overfilled Modal Bandwidth 850nm :,;;;2 3 [dB/km] 1300nm :,;;;0.6 [dB/km] 850nm ;a:500 [MHz· km] 1300nm ;a:500 [MHz· km] 0.200± 0.015 Numerical Aperture Group Refractive lndex 850nm 1.482 1300nm 1.477 1295-1340 [nm] 1295nm,;; A o,;; 1310nm .;;0.105 [ps/(nm2 • km)] 1310nm,;; A o,;; 1340nm ,;;O 000375 (1590-M) [ps/(nm2 • km)] 850nm :,;;;0.50 [dB] 1300nm :,;;;0.50 [dB] 850nm ,;; 1.0 [dB] 1300nm ,;; 1.0 [dB] Step (Mean of Bidirectional Measurement) ,;;o 10 [dB] lrregularities Over Fibre Length and Point Discontinuity :,;;;0.10 [dB] Attenuation Uniformity ,s,;0 08 [dB/km] :,;;;0.10 [dB/km] Zero Dispersion Wavelength, "A o Zero Dispersion Slope, So Macrobending Loss 100Turns@ 37.5 mm Radius 2Turns@ 15 mm Radius Backscatter Characteristics Environmental Characteristics Temperature Cycling 1300nm 850nm & 1300nm -60"C to +85"C Temperature-Humidity Cycling -10°C to +85"C, 4% to 98% RH :,;;;0.10 [dB/km] Water lmmersion 23°C, 30 days ,s;;0.10 [dB/km] Dry Heat 85°C , 30 days :,;;;0.10 [dB/km] Damp Heat 85°C , 85% RH , 30 days :,;;;0.10 [dB/km] Mechanical Specification ProofTest [N] [%] [kpsi] Coating Strip Force typical average force [N] peak force Dynamic Stress Corrosion Susceptibility Parameter (nd , typical) [N] 27 YANGT E OPTICAL FIBRE AND CABLE JOINT STOCK LIMITED COMPANY No.9 Optics Valley Avenue, Wuhan, Hubei, China(P.C.: 430073) Phone: +86 400-991-6698 Email: marketing@yofc.com www.khomax.com /www.yofc.com