Precision CNC Bed Mill Safety Procedures
1.
You shouldn’t use this machine unless you have been trained in its
safe use and operation.
2.
Ensure that your task is clearly understood.
3.
Ensure the operator wears appropriate personal protective
equipment. (Apron and full face shield)
4.
Never wear long sleeved clothing, gloves or anything that can
potentially be grabbed by the machine.
5.
If you have long hair, ensure that it is tied up and away from the
machine.
6.
Ensure all guards and chip shields are in place.
7.
Check that the work piece is securely clamped.
8.
Remove all tools from the bed of the machine.
9.
Ensure correct cnc program is selected.
10. Identify on/off switch and emergency stop button.
11. Never leave the machine running while unattended.
12. Before making adjustments switch off and bring the machine to a
complete standstill.
13. Never attempt to slow/stop the chuck or revolving work by hand.
14. Avoid letting swarf build up on the tool or job. Stop the machine
and remove it.
15. Switch CNC machine before removing waste material from the
machine.
16. Never pass the yellow lines without eye protection
Precision CNC Bed Mill Safety Procedures
17.
A) Chip shields
B) Chuck
C) 4th Axis Chuck
D) Safety
E) Cooler
F) Power Switch/ Emergency Stop Button
G) POWER SUPPLY UNIT (DO NOT TOUCH)