Meditech Fetal Monitors
Features
12.1” large TFT color LCD displays the FHR (fetal heart rate), TOCO (uterine constriction) curve
and the monitoring states, meanwhile, it has data storage and playback functions.
The internal line thermal recorder can records FHR, TOCO
Advanced DSP technology, accurate and reliable.
Multi-crystal, wide beam form, ultrasound transducer with high sensitivity, 1MHz pulsed wave,
low ultrasound power, safer to the fetal.
Alarm functions include: tachycardia alarm, bradycardia alarm, monitoring time over alarm, no
paper alarm and so on.
A standard patient event marker.
3 in 1 transducers, no cable intertwisting. Three separate probes (optional)
Operate with an encoder for easy and convenient use.
Upgrade to maternal fetal monitor
FHR . FM . TOCO
FHR . FM . TOCO . ECG . HR . NIBP . SpO2 . Temp . Resp
Meditech Equipment Co., Ltd (Meditech Group)
Address: Nanjing Road No.100, Qingdao, Shandong
Province, P. R. China
China Tel: 86-532-85832673
81705331
Fax: 86-532-85832155
Email: [email protected]
www.meditech.com.cn
Technical Parameters
Fetal Heart Rate:
Transducer: Multi-crystal, pulse doppler, high sensitivity
Ultrasound Intensity: <5mW/cm2
Working Frequency: 1.0MHz
Signal Processing: special DSP system and modern
recognization.
Measurement Range: 50~210 bpm
Alarm Range:
High limit: 160,170,180,190 bpm
Low limit: 90,100,110,120 bpm
Maximum Audio Output Power : 1.5 Watt
TOCO:
Measurement range: 0~100 units
Display:
The LCD displays FHR, TOCO, FM , maternal parameters ,
time, date, volume and
so on, It can store and play back the data.
Power:
AC100-240v, 50/60Hz or 16.8v Li-ION battery
Power Consumption: < 20W
Dimension: 350W×320D×85H(mm)
Net Weight:3.5kg
Gross Weight: 6kg
Working environment:
Temperature: 5℃~40℃
Humidity: < 85%
Atmospheric pressure: 86kPa~106kPa
Transport and Storage Environment:
Temperature: -10℃~55℃
Humidity: < 93%
Atmospheric pressure: 86kPa~106kPa
Transducer Acoustic Output:
Under the requirements laid down in IEC 1157,
1992, the peak negative acoustic pressure does not
exceed 1Mpa. The output beam intensity does not
exceed 20mW/cm2 and the spatial-peak
temporal-average intensity does not exceed
100mW/cm2
Download

MD901F cataloge

catalogemd901f