bL3re-s
3” miniature low voltage “noise-free” shallow non-IC remodel HOUSING
description
b a f f l e tr i m
Small aperture, low voltage, thermally protected remodel housing. For fast and
easy installation in existing plaster or mechanical ceilings from 1/2” to 1-3/8”
thick. Non-insulated ceilings or where insulation can be kept 3” from the housing.
Three remodel clips are easily retractable for fixture removal if necessary.
Accommodates up to 35W MR16 lamps.
Lamp Wattage: (1) Maximum 12V 35W MR16
Specifications
B. TRANSFORMER - Class II dimming
electronic transformer enhanced in heat
dissipating cover attached to junction
box.
dimming Controls - If fixture is
specified with an magnetic transformer
then use only dimmers specifically
designed for use with magnetic
transformers. If fixture is specified with
an electronic transformer then use only
dimmers specifically designed for use
with electronic transformers.
C. JUNCTION BOX - Listed for throughbranch circuit wiring and has four 1/2” KOs, one 3/4” KO and four Romex
knockouts with true pry-out slots and
strain clamps.
Listed
for Damp location
for Feed-through wiring
A. HOUSING - High temperature painted
22 gauge deep drawn single piece
housing. Accommodates lamps up to
35W depending on trim used.
D. INSTALLATION - Three preinstalled
spring clips which secure the housing
firmly into ceiling to accommodate
different ceiling thickness from 1/2” to 1-3/8”.
3”
Gasket to prevent air
flow from heated or air
conditioned spaces.
l ow vo l ta g e
ordering information, please specify:
TYPE
WATTage
ballast
VOLTAGE
TRIM TYPE
BL3RE-S
oE
o 20W
o 35W
oB1301 - Stepped Baffle (35 Tilt)
ow
o B1314 - Pinhole Baffle
op
oB1304 - Eyeball w/ Baffle (47 Tilt)
osn
o B1368 - Fully Adjustable w/ Baffle (35 Tilt)ocp
o B1313 - Pull Down Adjustable (90 Tilt) oBZ
E=Electronic
o120
o277
Air Shut
oAT
baffle
trim ring
0
0
0
0
Specified by:
Specified:
e
BL3re-s _______-______-______-_______-_______-_______
Type Watt ballast Voltage Trim type baffle trim ring
type:
(Sample of Catalog Number: BL3re-s-35W-E-120-b1301-w-wh)
Tel: 323-888-1973 • 877-375-5555 / Fax: 323-888-1977 • 877-375-3333
www.iuseelite.com • E-mail: sales@iuseelite.com
job name:
oWH
o bk
o sn
o cp
o ch
o pb
o BZ
3” low voltage baffle trims
B1301
B1314
pinhole baffle
MAX. LAMP WATTAGE:
12V 35W MR16
MAX. LAMP WATTAGE:
12V 35W MR16
available color combination:
CP-CP, SN-SN, W-Wh,
P-Wh, P-BK, bz-bz
available color combination:
CP-CP, SN-SN, W-Wh,
P-Wh, P-BK, bz-bz
B1304
eyeball w/ baffle (47 0 Tilt)
B1368
fully adj. w/ baffle (350 Tilt)
MAX. LAMP WATTAGE:
12V 35W MR16
MAX. LAMP WATTAGE:
12V 35W MR16
available color combination:
CP-CP, SN-SN, W-Wh,
P-Wh, P-BK
available color combination:
CP-CP, SN-SN, W-Wh,
P-Wh, P-BK
pull down adjustable (90 0 Tilt)
MAX. LAMP WATTAGE:
12V 35W MR16
available color combination:
CP-CP, SN-SN, W-Wh,
P-Wh, P-BK, p-sn
Descriptions:
• Built w/ deep baffle technology for glare
free illumination.
• Lamp holder rotates 3590 and adjusts 350.
• Can take up to 2 optical accessories.
• Unitized optics guarantee proper alignment
of lamp.
• All die cast construction is for functional and
aesthetic use.
• Both trim and trim ring are U.V. coated to
prevent rust and discoloration caused by
heat and sun light.
• Internal gasket prevents 100% of all light
leakage.
Eyeball - Adjusts up to 470 and rotates 3590.
ring/TRIM FINISHES: WH=White BK=Black SN=Satin Nickel CP=Copper CH=Chrome PB=Polished Brass BAFFLE FINISHES: W=White P=Black SN=Satin Nickel CP=Copper
REFLECTOR FINISHES: CL=Chrome RG=Gold W=White MB=Black CP=Copper SN=Satin Nickel
3”
l ow vo l ta g e
B1313
b a f f l e tr i m
stepped baffle (35 0 Tilt)
bl3re-s