EXHIBIT 1 PERFORMANCE SPECIFICATIONS PRODUCT CUT SHEETS (FOR REFERENCE) PHOTOMETRIC INFORMATION 25 PAGES TOTAL RFP 1415-67 (32) Pages Total) LED LIGHTING SPECIFICATIONS-STRIP KIT: x x x x x x x Wattage: 2’ Strip <10W Wattage: 4’ Strip <20W (2-2FT Strips) Each 2’ strip shall have three holes located centrally along the long axis for positive attachment to the fixture for ease of installation and to ensure adequate compression of the thermally conductive interface material between the strips and the fixture. Efficacy rate : >125 LM/W as measured with the 28 watt single driver powering either 4 or 6 of the 2’strips installed in a 2’X4’ parabolic test fixture in an LM79 test Color Rendering Index: (CRI) >82 (+/-0.5) Color Temperature: 4100K (+/- 200K) LEDs must have an LM70 point > 220,000 hours as calculated using the LM80 test data and the TM21 algorithm provided by the DOE x In-Situ Temp Test (ISTMT) results shall not exceed 35oC when measured with a 20 watt driver powering 2 of the 2’strips installed in a 2’X4’ parabolic test fixture for an ISTMT conducted in accordance with “Energy Star Program Requirements for Luminaires – Version 1.2”. x x x Voltage:110-277VAC 50-60 Hz External Drivers: Three drivers shall be specified as follows: a. To drive 2 pcs of the 2’ strips a single 14 watt driver will be used b. To drive 4 pcs of the 2’ strips a single 28 watt driver will be used c. To drive 6 pcs of the 2’ strips a single 28 watt driver will be used d. If multi-level switching is desired to drive 4 pcs of the 2’ strips a pair of 9 watt drivers will be used to provide three levels, off, 9 watt and 18 watt e. If multi-level switching is desired to drive 6 pcs of the 2’ strips a 9 watt driver and a 18 watt driver will be used to provide four levels, off, 9 watt, 18 watt and 27 watt f. If multi-level switching is desired to drive 8 pcs of the 2’ strips a 18 watt driver and a 18 watt driver will be used to provide four levels, off, 18 watt, 36 watt. x x x Power Factor: (PF) >0.98; Measured at 120 Vac Total Harmonic Distortion (THD) <5% ; Measured at 120 Vac Printed Circuit Board that carries the LEDs must be an aluminum core PCB design to provide optimal thermal management for the LEDs Thermally Conductive Adhesive Transfer Tape or equivalent with a Thermal Conductivity of at least 0.60 W/m-K as measured per ASTM C-177 shall be used on the mounting surface of the PCB where it contacts the fixture to ensure adequate thermal transfer from the LED PCB to the fixture housing. LED count per 2’ strip: Must have a minimum of 140 LED’s to ensure proper light distribution. Driver must be cULus listed Must be DLC Qualified 10 year Warranty on Driver and LEDs (product replacement only) Must have a manufacturer rated lifetime of 100,000 hours Must provide LM79, ISTMT and LM80 by NVLAP accredited testing laboratory approved by the DOE and DLC at the time of submittal x x x x x x x LED LIGHTING SPECIFICATIONS- PARKING LOT/WALKS x x x x x x x x x x x x x x x x x Wattage not to exceed specified wattage on the photometrics provided Light levels must meet IES standards as provided in the photometric layout Efficacy rate : >90 LM/W Color Rendering Index: (CRI) >75 Color Temperature: 5600K (+/- 200K) LEDs must have an LM70 point > 220,000 hours as calculated using the LM80 test data and the TM21 algorithm provided by the DOE Voltage: 110-277VAC 50-60 Hz Power Factor: (PF) >0.90; Total Harmonic Distortion (THD) <20% All fixtures must be US made All fixtures housings must be made from aluminum with a powder coated finish; Color- Bronze All fixtures must have glass lenses to protect LEDs and optics Heat sink must be extruded aluminum and secured inside the fixture Fixture must have vent ports to allow for proper heat dissipation Full 10 year Manufactures Warranty (product replacement only) Fixtures must be UL 1598 and 8750 wet rated Operating temperature range -40°F/147°F LED LIGHTING SPECIFICATIONS- SCREW IN BULBS x x x x x x x x Medium base socket (E27) Must be Energy Star Approved Wattage: 12W A19-(+/-10%) Voltage 110V-245V Color Rendering Index: (CRI) >82 Color Temperature: 4100K (+/- 200K) Frosted lens Warranty 3 years The District has attached representative products meeting the performance specifications for reference only. 14W 130 LM/W BSL310 (polycarbonate case) BSL310C (metal case with conduit) BSL310M (metal case without conduit) BSL310C-DF (metal case with dual conduit) Emergency Driver for Linear LED Strips Class 2 Output A Division Of Philips Electronics North America Corporation Product Summary 1.18” UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant *BSL310 is field installable when used with the Philips EvoKit G2 LED Retrofit luminaire. 14.5” 2.25” BSL310 EMERGENCY DRIVER FOR LINEAR LED STRIPS 14.0” Illumination Time 90 Minutes 1.16” 15.34” Full Warranty 5 Years (NOT pro-rata) 2.25” BSL310C EMERGENCY DRIVER FOR LINEAR LED STRIPS Universal Input Voltage 120-277 VAC, 50/60 Hz 15.0” AC Input Current 60 mA Maximum 1.16” 16.87” AC Input Power Rating 4.0 W Maximum Output Current and Voltage Selectable (See Table 1) Without Selector: minimum 200 mA, 35-50 VDC, minimum 300 mA over optimized range (30-34 VDC) With Selector: minimum 400 mA, 10-29 VDC Output Power 10.0 W (Maximum) Test Switch/Charging Indicator Light Illuminated Test Switch Battery High-Temperature, Maintenance-Free Nickel-Cadmium Battery 7- to 10-Year Life Expectancy 2.25” 1.37” 15.0” Application The BSL310 universal input (120-277 V) emergency LED driver works in conjunction with an AC LED driver that has an output current not to exceed 3.0 A. The emergency driver consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one case. The BSL310 can deliver up to 10 watts to an LED load (measured at nominal battery voltage) for 90 minutes. If used in an emergency-only fixture, no AC driver is necessary. The BSL310 is suitable for indoor and damp locations. For more information about specific LED and AC driver compatibility, please call the factory. When AC power fails, the BSL310 immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode. A patented circuit delays AC LED driver operation for up to 5 seconds to prevent over current of LED's that would occur if both drivers supply the load at the same time. Recharge Time 24 Hours Installation Temperature Rating (Ambient) 0°C to +55°C (32°F to 131°F) Dimensions (BSL310) 14.5” x 2.25” x 1.18” (369 mm x 58 mm x 30 mm) Mounting Center 14.0” (356 mm) Dimensions (BSL310C/M) 15.34” x 2.25” x 1.16” (390 mm x 58 mm x 29 mm) Mounting Center 15.0” (381 mm) x 1.37" (34.8mm) The BSL310 does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched hot lead must be connected to the emergency driver. The emergency driver must be fed from the same branch circuit as the AC driver. Per UL requirements, the polycarbonate BSL310 must be enclosed if remote mounted outside of the fixture. Installation is not recommended with fixtures where the ambient temperature may fall below 0° C. The product is suitable for installation in sealed and gasketed fixtures. For LED loads rated less than 30V, connect the load select per Table 1 for proper operation and optimum performance. The BSL310C-DF is offered in two options. Both are equipped with two flexible metal conduits. For option A, the illuminated test switch is located in one conduit and product wiring in the other. *BSL310 is field installable when used with the Philips EvoKit G2 LED Retrofit luminaire. Option B contains the illuminated test switch wiring in its own conduit, with the test switch and a wall plate included in a separate parts kit. UL and Code Compliance The BSL310 has been tested by Underwriters Laboratories in accordance with the standards set forth in UL 924, “Emergency Lighting and Power Equipment,” and is UL Recognized for factory installation only. Emergency illumination time exceeds the National Electrical Code (NEC), Life Safety Code (NFPA-LSC) and UL 90-minute requirements. Weight 2.25 lbs. (1.0 kg) - polycarbonate 3.15 lbs. (1.43kg)- metal w/o conduit 3.45 lbs. (1.56kg)- metal w/conduit 3.80 lbs. (1.73kg)- metal w/dual conduit L2300211 Specifiers Reference Comments BSL310C-DF EMERGENCY DRIVER FOR LINEAR LED STRIPS Operation Battery Charging Current 180 mA Project 1.37” Type Model No. 06/26/14 © Philips Emergency Lighting P.O. Box 460 Collierville, TN USA 38027-0460 Sales 800-223-5728 FAX 901-853-5009 Tech. Support 888-263-4638 www.philips.com/bodine (polycarbonate case) BSL310 (metal case with conduit) BSL310C (metal case without conduit) BSL310M (metal case with dual conduit) BSL310C-DF Emergency Driver for Linear LED Strips Class 2 Output Emergency Illumination The BSL310 operates an LED load of up to 10.0 W at nominal battery voltage for a minimum of 90 minutes. Benefits: s Specification Emergency lighting shall be provided by using a LED fixture equipped with a Philips Bodine BSL310 universal input (120-277 V) emergency driver. A patented circuit delays AC LED driver operation for up to 5 seconds to prevent over current of LED's that would occur if both drivers supply the load at the same time. This emergency driver shall consist of a high-temperature, maintenance-free nickel-cadmium battery, charger and electronic circuitry contained in one case. An illuminated test switch (ITS) to monitor charger and battery and installation hardware shall be provided. The emergency driver shall be capable of delivering up to 10 watts to an LED load for a minimum of 90 minutes. The BSL310 is suitable for indoor and damp locations. The BSL310 shall have a maximum of 4.0 watts of input power and a 24.0 Watt-hour battery capacity and shall comply with emergency standards set forth by the current NEC. The emergency driver shall be UL Recognized for factory installation only and shall be warranted for a full five years from date of purchase. Warranty Model BSL310 is warranted for five (5) full years from date of purchase. This warranty covers only properly installed Philips Bodine emergency LED drivers used under normal conditions. For the warranty period, Philips Emergency Lighting will, at its option, repair or replace without charge a defective emergency LED driver, provided it is returned to the factory transportation prepaid and our inspection determines it to be defective under terms of the warranty. Repair or replacement, as stated above, shall constitute the purchaser’s exclusive warranty, which does not extend to transportation, installation, labor or any other charges; nor does it apply to any equipment of another manufacturer used in conjunction with the emergency driver. s s s s s s Enables LED Linear strip fixtures to meet Emergency Code requirements Emergency mode lumen output of up to 1300 lumens Universal input (120-277 VAC) 2 wire input reduces wiring errors Compatible with a variety of LED strip manufacturers Compatible with AC drivers and LED loads rated for Class 2 Selectable Output Compatible With* Philips LEDline Samsung U990048 LG Lightbox *Contact Factory for compatibility with other LED applications IMPORTANT TEXT: REFER TO TABLE 1 REGARDING LOAD SELECT Table 1 LOAD SELECT OPTIONS MAXIMUM LOAD VOLTAGE LOAD SELECT 10V - 29V CONNECTED 30V - 50V NOT CONNECTED TABLE 2a. UL CLASSIFIED LOADS Philips LEDline Table 3 REMOTE DISTANCES (AWG) Maximum Remote Mounting Distance* (ft) Maximum Wire Length** (ft) 10 500 1000 12 300 600 Wire Gauge Manufacturer Series Reference Manufacturer’s Part Number 14 200 400 Philips Fortimo LED Line 1ft 1100lm 830 3R HV1 16 125 250 Philips Fortimo LED Line 1ft 1100lm 835 3R HV1 18 75 150 50 100 Philips Fortimo LED Line 1ft 1100lm 840 3R HV1 20 Philips Fortimo LED Line 1ft 1100lm 850 3R HV1 22 30 60 Philips Fortimo LED Line 1ft 1100lm 865 3R HV1 24 20 40 Philips Fortimo LED Line L2EVO1.5 ft 1250lm 830-1 26 13 26 Philips Fortimo LED Line L2EVO1.5 ft 1250lm 835-1 Philips Fortimo LED Line L2EVO1.5 ft 1250lm 830-1 TABLE 2b. Listed Luminaires Manufacturer Model Number Philips EvoKit LED Retrofit Luminaire * Total wire length can NOT exceed that given in Maximum Wire Length column. ** Distance is round trip wire length. Distances are for Emergency Driver only. Consult AC Driver specification for remote mounting distances when using AC Driver. L2300211 06/26/14 © Philips Emergency Lighting P.O. Box 460 Collierville, TN USA 38027-0460 Sales 800-223-5728 FAX 901-853-5009 Tech. Support 888-263-4638 www.philips.com/bodine For the most current technical information and notices, please visit TechNotes on our website. BSL310 (polycarbonate case) BSL310C (metal case with conduit) BSL310M (metal case without conduit) BSL310C-DF (metal case with dual conduit) Emergency Driver for Linear LED Strips Class 2 Output A Division Of Philips Electronics North America Corporation Product Summary 1.18” UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant *BSL310 is field installable when used with the Philips EvoKit G2 LED Retrofit luminaire. 14.5” 2.25” BSL310 EMERGENCY DRIVER FOR LINEAR LED STRIPS 14.0” Illumination Time 90 Minutes 1.16” 15.34” Full Warranty 5 Years (NOT pro-rata) 2.25” BSL310C EMERGENCY DRIVER FOR LINEAR LED STRIPS Universal Input Voltage 120-277 VAC, 50/60 Hz 15.0” AC Input Current 60 mA Maximum 1.16” 16.87” AC Input Power Rating 4.0 W Maximum Output Current and Voltage Selectable (See Table 1) Without Selector: minimum 200 mA, 35-50 VDC, minimum 300 mA over optimized range (30-34 VDC) With Selector: minimum 400 mA, 10-29 VDC Output Power 10.0 W (Maximum) Test Switch/Charging Indicator Light Illuminated Test Switch Battery High-Temperature, Maintenance-Free Nickel-Cadmium Battery 7- to 10-Year Life Expectancy 2.25” 1.37” 15.0” Application The BSL310 universal input (120-277 V) emergency LED driver works in conjunction with an AC LED driver that has an output current not to exceed 3.0 A. The emergency driver consists of a high-temperature nickel-cadmium battery, charger and electronic circuitry in one case. The BSL310 can deliver up to 10 watts to an LED load (measured at nominal battery voltage) for 90 minutes. If used in an emergency-only fixture, no AC driver is necessary. The BSL310 is suitable for indoor and damp locations. For more information about specific LED and AC driver compatibility, please call the factory. When AC power fails, the BSL310 immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode. A patented circuit delays AC LED driver operation for up to 5 seconds to prevent over current of LED's that would occur if both drivers supply the load at the same time. Recharge Time 24 Hours Installation Temperature Rating (Ambient) 0°C to +55°C (32°F to 131°F) Dimensions (BSL310) 14.5” x 2.25” x 1.18” (369 mm x 58 mm x 30 mm) Mounting Center 14.0” (356 mm) Dimensions (BSL310C/M) 15.34” x 2.25” x 1.16” (390 mm x 58 mm x 29 mm) Mounting Center 15.0” (381 mm) x 1.37" (34.8mm) The BSL310 does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched hot lead must be connected to the emergency driver. The emergency driver must be fed from the same branch circuit as the AC driver. Per UL requirements, the polycarbonate BSL310 must be enclosed if remote mounted outside of the fixture. Installation is not recommended with fixtures where the ambient temperature may fall below 0° C. The product is suitable for installation in sealed and gasketed fixtures. For LED loads rated less than 30V, connect the load select per Table 1 for proper operation and optimum performance. The BSL310C-DF is offered in two options. Both are equipped with two flexible metal conduits. For option A, the illuminated test switch is located in one conduit and product wiring in the other. *BSL310 is field installable when used with the Philips EvoKit G2 LED Retrofit luminaire. Option B contains the illuminated test switch wiring in its own conduit, with the test switch and a wall plate included in a separate parts kit. UL and Code Compliance The BSL310 has been tested by Underwriters Laboratories in accordance with the standards set forth in UL 924, “Emergency Lighting and Power Equipment,” and is UL Recognized for factory installation only. Emergency illumination time exceeds the National Electrical Code (NEC), Life Safety Code (NFPA-LSC) and UL 90-minute requirements. Weight 2.25 lbs. (1.0 kg) - polycarbonate 3.15 lbs. (1.43kg)- metal w/o conduit 3.45 lbs. (1.56kg)- metal w/conduit 3.80 lbs. (1.73kg)- metal w/dual conduit L2300211 Specifiers Reference Comments BSL310C-DF EMERGENCY DRIVER FOR LINEAR LED STRIPS Operation Battery Charging Current 180 mA Project 1.37” Type Model No. 06/26/14 © Philips Emergency Lighting P.O. Box 460 Collierville, TN USA 38027-0460 Sales 800-223-5728 FAX 901-853-5009 Tech. Support 888-263-4638 www.philips.com/bodine (polycarbonate case) BSL310 (metal case with conduit) BSL310C (metal case without conduit) BSL310M (metal case with dual conduit) BSL310C-DF Emergency Driver for Linear LED Strips Class 2 Output Emergency Illumination The BSL310 operates an LED load of up to 10.0 W at nominal battery voltage for a minimum of 90 minutes. Benefits: s Specification Emergency lighting shall be provided by using a LED fixture equipped with a Philips Bodine BSL310 universal input (120-277 V) emergency driver. A patented circuit delays AC LED driver operation for up to 5 seconds to prevent over current of LED's that would occur if both drivers supply the load at the same time. This emergency driver shall consist of a high-temperature, maintenance-free nickel-cadmium battery, charger and electronic circuitry contained in one case. An illuminated test switch (ITS) to monitor charger and battery and installation hardware shall be provided. The emergency driver shall be capable of delivering up to 10 watts to an LED load for a minimum of 90 minutes. The BSL310 is suitable for indoor and damp locations. The BSL310 shall have a maximum of 4.0 watts of input power and a 24.0 Watt-hour battery capacity and shall comply with emergency standards set forth by the current NEC. The emergency driver shall be UL Recognized for factory installation only and shall be warranted for a full five years from date of purchase. Warranty Model BSL310 is warranted for five (5) full years from date of purchase. This warranty covers only properly installed Philips Bodine emergency LED drivers used under normal conditions. For the warranty period, Philips Emergency Lighting will, at its option, repair or replace without charge a defective emergency LED driver, provided it is returned to the factory transportation prepaid and our inspection determines it to be defective under terms of the warranty. Repair or replacement, as stated above, shall constitute the purchaser’s exclusive warranty, which does not extend to transportation, installation, labor or any other charges; nor does it apply to any equipment of another manufacturer used in conjunction with the emergency driver. s s s s s s Enables LED Linear strip fixtures to meet Emergency Code requirements Emergency mode lumen output of up to 1300 lumens Universal input (120-277 VAC) 2 wire input reduces wiring errors Compatible with a variety of LED strip manufacturers Compatible with AC drivers and LED loads rated for Class 2 Selectable Output Compatible With* Philips LEDline Samsung U990048 LG Lightbox *Contact Factory for compatibility with other LED applications IMPORTANT TEXT: REFER TO TABLE 1 REGARDING LOAD SELECT Table 1 LOAD SELECT OPTIONS MAXIMUM LOAD VOLTAGE LOAD SELECT 10V - 29V CONNECTED 30V - 50V NOT CONNECTED TABLE 2a. UL CLASSIFIED LOADS Philips LEDline Table 3 REMOTE DISTANCES (AWG) Maximum Remote Mounting Distance* (ft) Maximum Wire Length** (ft) 10 500 1000 12 300 600 Wire Gauge Manufacturer Series Reference Manufacturer’s Part Number 14 200 400 Philips Fortimo LED Line 1ft 1100lm 830 3R HV1 16 125 250 Philips Fortimo LED Line 1ft 1100lm 835 3R HV1 18 75 150 50 100 Philips Fortimo LED Line 1ft 1100lm 840 3R HV1 20 Philips Fortimo LED Line 1ft 1100lm 850 3R HV1 22 30 60 Philips Fortimo LED Line 1ft 1100lm 865 3R HV1 24 20 40 Philips Fortimo LED Line L2EVO1.5 ft 1250lm 830-1 26 13 26 Philips Fortimo LED Line L2EVO1.5 ft 1250lm 835-1 Philips Fortimo LED Line L2EVO1.5 ft 1250lm 830-1 TABLE 2b. Listed Luminaires Manufacturer Model Number Philips EvoKit LED Retrofit Luminaire * Total wire length can NOT exceed that given in Maximum Wire Length column. ** Distance is round trip wire length. Distances are for Emergency Driver only. Consult AC Driver specification for remote mounting distances when using AC Driver. L2300211 06/26/14 © Philips Emergency Lighting P.O. Box 460 Collierville, TN USA 38027-0460 Sales 800-223-5728 FAX 901-853-5009 Tech. Support 888-263-4638 www.philips.com/bodine For the most current technical information and notices, please visit TechNotes on our website. www.RedBirdLED.com phone (678) RED-BIRD (678-733-2473) contact info@redbirdled.com 675,3,7.,7റ PRODUCT DESCRIPTION SPECIFICATIONS AND FEATURES Dimensions Cardinal™ STRIPIT™ KITs, Using the same ultra high 21.75” X 2.5” LED strips in AL Extrusions efficacy LEDs and power supplies developed for our ‘best-in- Wattage 10, 14, 18, 22, 28, 36, 44, 72, 88 10 14 18 22 watt watt watt watt >> >> >> >> 1250 1750 2250 2750 lumens lumens lumens lumens 2’ strip 2-2’ strips 2-2’ strips 2-2’ strip class’ tube lights, RedBird LED is proud to offer a direct, field installable LED retrofit kit that provides one of the easiest to install and most affordable lighting upgrades available today. Efficacy (5000K installed in >140 Lms/Watt Employing a direct molecular fusing between the aluminum core PCB carrying the LEDs and the low profile strip extrusion ensures the lowest LED In Situ TMP readings we have ever seen in a high efficacy LED lighting system. Based on the LM80 and the ISTMT data sets the calculated Energy Star TM21 LED L70 point is greater than 240,000 hours. CRI R9 Duv Voltage Our multi-volt (110-277 VAC) proprietary LED drivers with active power factor correction and a discontinuous current mode of operation deliver efficiencies up to 94%, a PF=0.996 and THD < 6% . Built with premium components, .the MTBF rating on the RedBird LED drivers is greater than 140,000 hours. Total Lumens > 82 > 5 @ 4100K Duv<0.0019 120 ~ 277VAC 50-60 Hz 10, 14, 18, 22, 28, 36, 44, 72, 88 watts 0-10 volt dimming Battery Backed Emergency Driver LED Drivers Power Factor / THD PF>0.99, THD < 6% Pre-terminated leads with polarized plugs to connect driver to strips, PH connectors Aluminum core, molecularly fused to extrusion through a mechanical swaging process 144 SMD LEDs/2’ strip 3500K, 4100K, 5000K +/- 200’K (< 3 McAdam ellipses) Power Connections PCB construction LED Elements Color Temperature RU cULus E347929, E363806, E 357319, E362805, E341042 Native Beam Angle 120° 100,000 hr lifetime, Ten Year Replacement Warranty. With these levels of quality, efficiency and cool operating temperatures we are able to provide a complete system replacement warranty for a full ten years and a 100,000 hour stated lifetime with no pro-rating or exhaustive list of exclusions. Fast, simple installation, only one tool required. The complete system has been designed to cut installation time and complexity to the minimum. Freedom to locate the LED strips and the driver within the fixture allows optimizing the fit for each application. The installer simply positions the strips in as desired in the fixture and inserts three TEK screws with a cordless driver. This provide a positive mechanical attachment while the integral 6063 T5 extrusion ensures excellent thermal management regardless of any specific fixture peculiarities. Lambertian, Soft Bat-Wing, DLC Bat-Wing, 60o, 45o, 25o, Side-Throw, Custom Lens Options Operating Temperature -40° F to 110° F UL, cUL, RU, 1993, 1598, 1598(B), 1598(C) 8750, FCC, CE, RoHS Certifications DesignLights Consortium Yes Warranty 10 Years for External Driver and Strips Full replacement Warranty, no Pro-rating S2-3-28W-41K STRIPIT KIT™ comprising Driver, 3 Strips in Extrusions, Jumpers and Diffusers for Lambertian output. warranty@redbirdled.com Rated Lifetime 100,000 Hrs (TM21 L70 > 240,000 hrs) ORDERING INFORMATION Size - Form - Color Temp - DIM Polarized connectors simplify installation S2-4 36W 50K DIM - (power) (5000 K CCT) (2 foot-# pcs) Ordering Example: S2-4-36W-50K-DIM includes 4 pcs of the 2’ strips @5000K CCT, a single 0-10 volt dimmable 36 watt driver with two preterminated leads to connect PS to Strips and two pcs 3” jumpers to connect two strips together - PATENTS PENDING - 675,3,7.,7റ,QWHJUDO2SWLFV%HDP)RUPLQJ2SWLRQV 675,3,7.,7റ,QWHJUDO2SWLFV%HDP)RUPLQJ2SWLRQV 7KLQILOP'LIIXVHULQVWDOOHG675,3,7.,7റWRJHQHUDWHVPRRWK/DPEHUWLDQSDW %L3ODQDU'LIIXVHULQVWDOOHG675,3,7.,7റWRJHQHUDWHಫ 6 RIW ಬ %DW:LQJIRU'H/DPSLQJDSSOLFDWLRQV 0LFUR6WUXFWXUHG2SWLFDO7KLQ)LOPLQVWDOOHGLQ675,3,7.,7റWRJHQHUDWH'/&&RPSOLDQW3DUNLQJ'HFN %DW:LQJSDWWHUQ A typical application in a challenging environment: Retrofitting any parabolic style troffer, particularly the 2X2 U-tube versions, is one of the most challenging fixtures to achieve a well performing and aesthetically pleasing LED retrofit on. The RedBird STRIPIT KIT™ system offers a perfect solution to this challenge. With the ability to position the strips arbitrarily within the fixture, they can be optimally centered within the grid of the parabolic grill. Also, because they are placed on the uppermost surface of the fixture, and the lambertian diffuser option is installed, the light fill of the fixture is as good, if not better, than when the fluorescent tubes were in place. The result is a finished appearance where the parabolic grills are uniformly illuminated with a soft, indirect light, and the radiometric distribution of the fixture is actually improved over the original performance with the U-tubes installed by virtue wider output beam delivered by the thin-film directional diffusers. $675,3,7.,7റUHWURILWLQD;SDUDEROLFWURIIHUSUHYLRXVO\ SRSXODWHGZLWKIOXRUHVFHQW8WXEHV S2-3-28W-35K STRIPIT KIT™ installed in a Lithonia SP8 2X2 Prismatic Troffer. Even with only three strips installed, because of the deep location and the diffusers the ‘fill’ of the A12 lens is very uniform with none of the ‘banding’ effect complained about with most LED retrofit systems. Performance advantages beyond energy savings– Better uniformity of light fill behind a Prismatic lens or Parabolic Grill: Because the strips are placed on the inside surface of the top of the fixture, the distance between the LEDs and the lens is maximized. Also, the thin-film diffuser material provides a > 180o beam pattern giving a multi-path fill of the entire inside of the fixture similar to the fluorescent tubes. These two qualities combine to deliver a smooth overlapping coverage resulting in a very continuous and uniform light level over the entire fixture aperture. 7KHSDJHEHORZLVDQH[FHUSWIURPDQ/0WHVWUHSRUWGRQHIRU5HG%LUG/('RQDQ$/36HQWU\6HULHV)*7 9DSRU7LJKW)L[WXUHILWWHGZLWKD5HG%LUG/('675,3,7.,7റPRGHO6:.7KHFRPSOHWHUHSRUWLVDYDLODEOH IRUUHYLHZLIUHTXHVWHG6RPHQRWDEOHSRLQWVRQWKLVSDJHDUHWKHIIL[WXUH(IILFDF\VKRZQWREH!OXPHQVZDWWWKH ,Q6LWX7HPSHUDWXUH0HDVXUHPHQW7HVW ,6707 VKRZVWKH/('VUXQQLQJDWDYHU\FRROR&WKHPHDVXUHG &&7RI.LVZLWKLQR.RIWKHVSHFLILHG&&7DOOWKLVZLWKD&5,RI:KDWWKLVUHSRUWGRHVQ ಬ WVD\LVWKDWWKLV HQWLUHSDFNDJHRIIL[WXUHDQG675,3,7.,7റKDVDQ0653RIOHVVWKDQ7KLVJLYHVWKLVSURGXFWDOXPHQV GROODUYDOXHRI$QGZLWKD\HDUZDUUDQW\ www.RedBirdLED.com phone (678) RED-BIRD (678-733-2473) contact info@redbirdled.com Cardinal™ 4’ External Driver Tube SPECIFICATIONS AND FEATURES Length Wattage Four Foot External Driver Version 9, 14, 18 watts fixed, 2-20 dimmable Total Lumens 9 watt >> 14 watt >> 18 watt >> 20 watts>> (@5000K) 1300 lumens 2030 lumens 2600 lumens 2900 lumens Efficacy (@ 5000K, Clear lens) 145 Lms/Watt CRI CRI 82 Total Harmonic Distortion 3.58% (120 VAC) 7.64% (277 VAC) Duv Duv = 0.00127 Voltage 120 ~ 277VAC 50-60 Hz RB-9W-132-E, RB-14W-132-E, Power Supply Options RB-18W-132-E, RB-20W-132-DIM, RB-40W-132-DIM, RB-88W-132-DIM Power Factor 0.998 (120 VAC) 0.953 (277 VAC) Double ended, Low voltage, 32-40 VDC, Power Input to Tube constant current regulation, Polarity not important Endcaps G13 Bi-Pin, rotatable option available LED Elements 288 LEDs, Surface Mount Devices (SMDs) 3500K, 4100K, 5000K +/- 200’K Color Temperature (3 McAdam Ellipses) PRODUCT DESCRIPTION Cardinal™ Linear Lights are high quality replacements of standard fluorescent tubes (T8 and T12) and provide electrical savings of > 50%. Installation is easy with the same G13 Bi-Pin connections as fluorescent tubes and a universal voltage external driver to mount where the old fluorescent ballast had been located. Very tightly binned surface mount device LEDs are employed to provide a 100,000+ hour lifetime, a measured efficacy of >145 lms/watt and a CRI=82. Exceptional thermal management is achieved with an aluminum core LED PCB thermally bonded to the ribbed aluminum heat sink with a ‘D’ channel extrusion made from 6063-T5 alloy for optimal heat conduction. The lens over the LEDs is a tough polycarbonate design available as crystal clear or a frosted option. Solid brass, nickel-plated terminal pins are installed in end-caps that are fastened with screws to the aluminum core. If the application needs it, a no-cost, rotatable end-cap option can be specified as well. All of these features and being the first Led tube earn DesignLights Consortium’s Qualification helped the Cardinal™ LED Tube win the IES Progress Committee Selection for 2012.. E347929, E363806, E 357319, E362805, E341042 Dry or Damp Locations cULus listed Beam Angle Size Operating Temperature Certifications DesignLights Consortium Warranty Lifetime 120° (Clear Lens Installed) 48” -40 °F to 110 °F UL, cUL, RU, 1993, 1598, 1598(B), 1598(C) 8750, FCC, CE, RoHS 32 RedBird models on the DLC List Highest efficacy LED tube on the DLC list 10 Years warranty@redbirdled.com 100,000 Hours (LM-80 available) - PATENTS PENDING - CONNECTION METHOD Remove fluorescent ballast. Install the External Driver and wire as shown below. The same basic connections apply whether the power supply is a fixed version or a dimmable version. ORDERING INFORMATION Size - Form L4-4 foot - 18W - Color Temp - Model - E, DIM,F - 41K-4100 K - 132 - ROT -E-F Fixed External Driver Version 120 ~ 277 VAC RBD-EXT-##-CC + Polarity not important - Dimmable External Driver Version 12 volt Aux Power Ordering Example: L4-18W-41K-132–E-F is uses one RBD-EXT18W-CC, 18 watt, constant current driver connected to a 4’ LED Linear Replacement Lamp employing 4100K CCT LEDs and a frosted lens. Dimmable configurations are one RBD-DIM-20W-CC power supply to drive each 4’ LED tubes, one RBD-DIM-44W-CC drive two 4’ tubes or one RBD-DIM-88W-CC to drive four 4’ tubes. 0-10 volt Dimming signal 120 ~ 277 VAC RBD-DIM-##-CC + Polarity not important - NOTE: The External Driver versions of the Cardinal™ LED tubes use a double-ended power input design for the low voltage, 32-40 VDC, constant current power supplied by the external driver. CASCADE SERIES - AREA AND SITE OVERVIEW The Cireon Cascade Series is the industry's longest lasting high performance solid state luminaires. With the best in thermal management, proprietary optics, and the highest quality componentry available, Cireon products provide beautifully uniform lighting while maintaining unmatched output over the industry's longest lifetimes. Part #: CA2-048-AG-AH-AF-BZ-AF-NS Project: Notes: Date: FEATURES Thermal Management The industry's only combination of the superior thermal conductivity of an aluminum extrusion heat sink with a birdprotected ventilated housing. Dual-sided copper clad boards with thermally inductive interfaces optimize thermal conductivity. Tall, frequent fin geometry paired with largest in class LED spacing provides 15.1in2 convective surface area per LED. Optical Proprietary family of optics designed by Cireon for the specific output signature of the Luxeon LED combine class-leading efficiency and uniformity with soft, undetectable edges. Quality Componentry Philips Luxeon® LEDs, with the patented wafer-bonded design, provides the industry’s most efficient and robust designs all with half the thermal resistance of the next closest competitor. With over six decades of knowledge, the Philips Advance power supplies provide reliability, onboard thermal and electrical overload protection and the smoothest dimming available. System Watts: Luxeon LEDs: Delivered Lumens: Distribution: Color Temperature: Input Voltage: 50 48 4950 lm Type III 5700K 120-277V also available in 347-480V CRI: Mount: Integral Sensor: 75 Typ 2AF Slip Fitter No Sensor Housing Color: Architectural Bronze Mechanical available in White, Black, Bronze, and Custom Colors Dimensions: 10"W x 13"D x 5.6"H. Carton Weight: 17lbs.. EPA Rating- 1.02 Solid aluminum housing, baked powder coat finish on all exterior and interior surfaces. Stainless steel fasteners and hardware; no ferrous metals. Bayer Makrolon V-0 polycarbonate optics for superior chemical and impact resistance. Operating Temperature Range: -40oC/-40oF to 55oC/130oF. Electrical UL/cUL Wet Listed to UL 1598 and 8750. Driver reduces power if case temperature exceeds 80oC/176oF. Class A sound rating. 0-10V dimming standard, 100% to 10%, available with optional integral sensors. >0.9 power factor, <20% THD, RoHS. Standard 3kV surge suppression. Optional 20kV surge suppression. Spacing Criteria: Cireon's proprietary Type 3 free form optic delivers an avg:min uniformity of better than 1.2:1 when spaced at 2.5 x 4.0 times the mounting height. At 3.1 x 5.4 times the mounting height, uniformity is better than 2:1. Your Authorized Cireon Agent Notes: (1) Combines LM-79 in situ at 25oC/76oF ambient and LM-80 data as published by Philips Lumileds in the DOE's TM-21 Calculation. Type III Type V Proven Longevity Mounting Options The Cascade family’s unified flow-through thermal management system provides a life expectancy of 201,000 to 440,000 hours to 70% output(1). Standard dard 2 2AF Slip Fitter (2-1/2" ID) TM-21 using Cireon LM-79 in situ and Lumileds LM-80 data: 60o 80o Standard Two and Four Bolt Arm Arms Standard Yoke Mount ount 120o 80o Forward Standard tandard Wall Pack Mount M Optional Integral Sensor Choose Occupancy, Photocell, or Hybrid d (combined). Suitable for mounting heights from 7' to 45';'; specify mounting height when ordering. custom mounts available (Example: CA2-048-AG-AJ-AL-WH-AF-PC) ORDERING INFORMATION Family CA Cascade No. of 24 LED Total LED Kelvin Temperature, Modules Count CRI (Typical) Drive Current, Input Voltage Optic, Included Angle Housing Color Mounting Method Integral Sensor 1 -024 -AG 5700K, 75CRI -AH 350mA, 120-277V -AB 80o included -BK Black -AF 2AF Slip Fitter -NS No Sensor 2 -048 -AH 4000K, 75CRI -AJ 530mA, 120-277V -AC 60o included -BZ Architectural Bronze -TB Two-Bolt Arm -WS With Sensor -AJ 5000K, 75CRI -AK 700mA, 120-277V -AF Type 3, wide rectangle -WH White -FB Four-Bolt Arm -PC Integral Photocell On/Off Only -AL 700mA, 347-480V -AG Type 5, wide square -CU Custom Colors -WM -CU Custom color temperature and CRI levels Wall Pack Flush Mount -AM 530mA, 347-480V -AL 120o included -YM Yoke Mount -AN 350mA, 347-480V -AM 80o Forward Throw -CU Custom Mount 100% of Cireon's proprietary componentry is manufactured by US suppliers in US facilities. All final assembly done in the US. CASCADE SERIES - AREA AND SITE OVERVIEW The Cireon Cascade Series is the industry's longest lasting high performance solid state luminaires. With the best in thermal management, proprietary optics, and the highest quality componentry available, Cireon products provide beautifully uniform lighting while maintaining unmatched output over the industry's longest lifetimes. Part #: CA3-072-AG-AK-AG-BZ-AF-NS Project: Notes: Date: FEATURES Thermal Management The industry's only combination of the superior thermal conductivity of an aluminum extrusion heat sink with a birdprotected ventilated housing. Dual-sided copper clad boards with thermally inductive interfaces optimize thermal conductivity. Tall, frequent fin geometry paired with largest in class LED spacing provides 15.1in2 convective surface area per LED. Optical Proprietary family of optics designed by Cireon for the specific output signature of the Luxeon LED combine class-leading efficiency and uniformity with soft, undetectable edges. Quality Componentry Philips Luxeon® LEDs, with the patented wafer-bonded design, provides the industry’s most efficient and robust designs all with half the thermal resistance of the next closest competitor. With over six decades of knowledge, the Philips Advance power supplies provide reliability, onboard thermal and electrical overload protection and the smoothest dimming available. System Watts: Luxeon LEDs: Delivered ered Lumens: Distribution: erature Color Temperature: Input Voltage: lta 146 48 11680 lm 116 Type V 5700K 120-277V also available in 347-480V CRI: Mount: Integral Sensor: 75 Typ 2AF Slip Fitter No Sensor Housing Color: Architectural Bronze Mechanical also available in White, Black, and Custom Colors Dimensions: 12"W x 19"D x 5.6"H. Carton Weight: 22lbs.. EPA Rating- 1.5 Solid aluminum housing, baked powder coat finish on all exterior and interior surfaces. Stainless steel fasteners and hardware; no ferrous metals. Bayer Makrolon V-0 polycarbonate optics for superior chemical and impact resistance. Operating Temperature Range: -40oC/-40oF to 55oC/130oF. Electrical UL/cUL Wet Listed to UL 1598 and 8750. Driver reduces power if case temperature exceeds 80oC/176oF. Class A sound rating. 0-10V dimming standard, 100% to 10%, available with optional integral sensors. >0.9 power factor, <20% THD, RoHS. Standard 3kV surge suppression. Optional 20kV surge suppression. Spacing Criteria: Cireon's proprietary Type 5 free form optic delivers an avg:min uniformity of better than 1.2:1 when spaced at 3.0 x 3.0 times the mounting height. At 4.2 x 4.2 times the mounting height, uniformity is better than 2:1. Your Authorized Cireon Agent Notes: (1) Combines LM-79 in situ at 25oC/76oF ambient and LM-80 data as published by Philips Lumileds in the DOE's TM-21 Calculation. (2) additional Type III Type V Proven Longevity Mounting Options The Cascade family’s unified flow-through thermal management system provides a life expectancy of 201,000 to 440,000 hours to 70% output(1). Standard dard 2 2AF Slip Fitter (2-1/2" ID) TM-21 using Cireon LM-79 in situ and Lumileds LM-80 data: 60o 80o Standard Two and Four Bolt Arm Arms Standard Yoke Mount ount 120o 80o Forward Standard Wall Pack Mount Optional Integral Sensor Choose Occupancy, Photocell, or Hybrid d (combined). Suitable for mounting heights from 7' to 45';'; specify mounting height when ordering. custom color shown Custom Mounts available (Example: CA3-072-AJ-AK-AF-BZ-FB-WS) ORDERING INFORMATION Family CA Cascade No. of 24 LED Total LED Kelvin Temperature, Modules Count CRI (Typical) Drive Current, Input Voltage Optic, Included Angle Housing Color Mounting Method Integral Sensor 2 -048 -AG 5700K, 75CRI -AH 350mA, 120-277V -AB 80o included -BK Black -AF 2AF Slip Fitter -NS No Sensor 3 -072 -AH 4000K, 75CRI -AJ 530mA, 120-277V -AC 60o included -BZ Architectural Bronze -TB Two-Bolt Arm -WS With Sensor -AJ 5000K, 75CRI -AK 700mA, 120-277V -AF Type 3, wide rectangle -WH White -FB Four-Bolt Arm -PC Integral Photocell On/Off Only -AL 700mA, 347-480V -AG Type 5, wide square -CU Custom Colors -WM -CU Custom color temperature and CRI levels Wall Pack Flush Mount -AM 530mA, 347-480V -AL 120o included -YM Yoke Mount -AN 350mA, 347-480V -AM 80o Forward Throw -CU Custom Mount 100% of Cireon's proprietary componentry is manufactured by US suppliers in US facilities. All final assembly done in the US. CASCADE SERIES - AREA AND SITE OVERVIEW The Cireon Cascade Series is the industry's longest lasting high performance solid state luminaires. With the best in thermal management, proprietary optics, and the highest quality componentry available, Cireon products provide beautifully uniform lighting while maintaining unmatched output over the industry's longest lifetimes. Part #: CA3-072-AG-AK-AF-BZ-AF-NS Project: Notes: Date: FEATURES Thermal Management The industry's only combination of the superior thermal conductivity of an aluminum extrusion heat sink with a birdprotected ventilated housing. Dual-sided copper clad boards with thermally inductive interfaces optimize thermal conductivity. Tall, frequent fin geometry paired with largest in class LED spacing provides 15.1in2 convective surface area per LED. Optical Proprietary family of optics designed by Cireon for the specific output signature of the Luxeon LED combine class-leading efficiency and uniformity with soft, undetectable edges. Quality Componentry Philips Luxeon® LEDs, with the patented wafer-bonded design, provides the industry’s most efficient and robust designs all with half the thermal resistance of the next closest competitor. With over six decades of knowledge, the Philips Advance power supplies provide reliability, onboard thermal and electrical overload protection and the smoothest dimming available. System Watts: Luxeon LEDs: Delivered ered Lumens: Distribution: erature Color Temperature: Input Voltage: lta 146 48 11388 lm 113 Type III 5700K 120-277V also available in 347-480V CRI: Mount: Integral Sensor: 75 Typ 2AF Slip Fitter No Sensor Housing Color: Architectural Bronze Mechanical also available in White, Black, and Custom Colors Dimensions: 12"W x 19"D x 5.6"H. Carton Weight: 22lbs.. EPA Rating- 1.5 Solid aluminum housing, baked powder coat finish on all exterior and interior surfaces. Stainless steel fasteners and hardware; no ferrous metals. Bayer Makrolon V-0 polycarbonate optics for superior chemical and impact resistance. Operating Temperature Range: -40oC/-40oF to 55oC/130oF. Electrical UL/cUL Wet Listed to UL 1598 and 8750. Driver reduces power if case temperature exceeds 80oC/176oF. Class A sound rating. 0-10V dimming standard, 100% to 10%, available with optional integral sensors. >0.9 power factor, <20% THD, RoHS. Standard 3kV surge suppression. Optional 20kV surge suppression. Spacing Criteria: Cireon's proprietary Type 3 free form optic delivers an avg:min uniformity of better than 1.2:1 when spaced at 2.5 x 4.0 times the mounting height. At 3.1 x 5.4 times the mounting height, uniformity is better than 2:1. Your Authorized Cireon Agent Notes: (1) Combines LM-79 in situ at 25oC/76oF ambient and LM-80 data as published by Philips Lumileds in the DOE's TM-21 Calculation. (2) additional Type III Type V Proven Longevity Mounting Options The Cascade family’s unified flow-through thermal management system provides a life expectancy of 201,000 to 440,000 hours to 70% output(1). Standard dard 2 2AF Slip Fitter (2-1/2" ID) TM-21 using Cireon LM-79 in situ and Lumileds LM-80 data: 60o 80o Standard Two and Four Bolt Arm Arms Standard Yoke Mount ount 120o 80o Forward Standard Wall Pack Mount Optional Integral Sensor Choose Occupancy, Photocell, or Hybrid d (combined). Suitable for mounting heights from 7' to 45';'; specify mounting height when ordering. custom color shown Custom Mounts available (Example: CA3-072-AJ-AK-AF-BZ-FB-WS) ORDERING INFORMATION Family CA Cascade No. of 24 LED Total LED Kelvin Temperature, Modules Count CRI (Typical) Drive Current, Input Voltage Optic, Included Angle Housing Color Mounting Method Integral Sensor 2 -048 -AG 5700K, 75CRI -AH 350mA, 120-277V -AB 80o included -BK Black -AF 2AF Slip Fitter -NS No Sensor 3 -072 -AH 4000K, 75CRI -AJ 530mA, 120-277V -AC 60o included -BZ Architectural Bronze -TB Two-Bolt Arm -WS With Sensor -AJ 5000K, 75CRI -AK 700mA, 120-277V -AF Type 3, wide rectangle -WH White -FB Four-Bolt Arm -PC Integral Photocell On/Off Only -AL 700mA, 347-480V -AG Type 5, wide square -CU Custom Colors -WM -CU Custom color temperature and CRI levels Wall Pack Flush Mount -AM 530mA, 347-480V -AL 120o included -YM Yoke Mount -AN 350mA, 347-480V -AM 80o Forward Throw -CU Custom Mount 100% of Cireon's proprietary componentry is manufactured by US suppliers in US facilities. All final assembly done in the US. CASCADE SERIES - AREA AND SITE OVERVIEW The Cireon Cascade Series is the industry's longest lasting high performance solid state luminaires. With the best in thermal management, proprietary optics, and the highest quality componentry available, Cireon products provide beautifully uniform lighting while maintaining unmatched output over the industry's longest lifetimes. Part #: CA3-072-AG-AK-AL-BZ-AF-NS Project: Notes: Date: FEATURES Thermal Management The industry's only combination of the superior thermal conductivity of an aluminum extrusion heat sink with a birdprotected ventilated housing. Dual-sided copper clad boards with thermally inductive interfaces optimize thermal conductivity. Tall, frequent fin geometry paired with largest in class LED spacing provides 15.1in2 convective surface area per LED. Optical Proprietary family of optics designed by Cireon for the specific output signature of the Luxeon LED combine class-leading efficiency and uniformity with soft, undetectable edges. Quality Componentry Philips Luxeon® LEDs, with the patented wafer-bonded design, provides the industry’s most efficient and robust designs all with half the thermal resistance of the next closest competitor. With over six decades of knowledge, the Philips Advance power supplies provide reliability, onboard thermal and electrical overload protection and the smoothest dimming available. System Watts: Luxeon LEDs: Delivered ered Lumens: Distribution: erature Color Temperature: Input Voltage: lta 146 48 12848 lm 128 120 degree 5700K 120-277V also available in 347-480V CRI: Mount: Integral Sensor: 75 Typ 2AF Slip Fitter No Sensor Housing Color: Architectural Bronze Mechanical also available in White, Black, and Custom Colors Dimensions: 12"W x 19"D x 5.6"H. Carton Weight: 22lbs.. EPA Rating- 1.5 Solid aluminum housing, baked powder coat finish on all exterior and interior surfaces. Stainless steel fasteners and hardware; no ferrous metals. Bayer Makrolon V-0 polycarbonate optics for superior chemical and impact resistance. Operating Temperature Range: -40oC/-40oF to 55oC/130oF. Electrical UL/cUL Wet Listed to UL 1598 and 8750. Driver reduces power if case temperature exceeds 80oC/176oF. Class A sound rating. 0-10V dimming standard, 100% to 10%, available with optional integral sensors. >0.9 power factor, <20% THD, RoHS. Standard 3kV surge suppression. Optional 20kV surge suppression. Spacing Criteria: Cireon's proprietary 120 degree reflector and lens optic assembly delivers an avg:min uniformity of better than 1.2:1 when spaced at 1.33 times the mounting height. At 2.07 times the mounting height, uniformity is better than 2:1. Your Authorized Cireon Agent Notes: (1) Combines LM-79 in situ at 25oC/76oF ambient and LM-80 data as published by Philips Lumileds in the DOE's TM-21 Calculation. (2) additional Type III Type V Proven Longevity Mounting Options The Cascade family’s unified flow-through thermal management system provides a life expectancy of 201,000 to 440,000 hours to 70% output(1). Standard dard 2 2AF Slip Fitter (2-1/2" ID) TM-21 using Cireon LM-79 in situ and Lumileds LM-80 data: 60o 80o Standard Two and Four Bolt Arm Arms Standard Yoke Mount ount 120o 80o Forward Standard Wall Pack Mount Optional Integral Sensor Choose Occupancy, Photocell, or Hybrid d (combined). Suitable for mounting heights from 7' to 45';'; specify mounting height when ordering. custom color shown Custom Mounts available (Example: CA3-072-AJ-AK-AF-BZ-FB-WS) ORDERING INFORMATION Family CA Cascade No. of 24 LED Total LED Kelvin Temperature, Modules Count CRI (Typical) Drive Current, Input Voltage Optic, Included Angle Housing Color Mounting Method Integral Sensor 2 -048 -AG 5700K, 75CRI -AH 350mA, 120-277V -AB 80o included -BK Black -AF 2AF Slip Fitter -NS No Sensor 3 -072 -AH 4000K, 75CRI -AJ 530mA, 120-277V -AC 60o included -BZ Architectural Bronze -TB Two-Bolt Arm -WS With Sensor -AJ 5000K, 75CRI -AK 700mA, 120-277V -AF Type 3, wide rectangle -WH White -FB Four-Bolt Arm -PC Integral Photocell On/Off Only -AL 700mA, 347-480V -AG Type 5, wide square -CU Custom Colors -WM -CU Custom color temperature and CRI levels Wall Pack Flush Mount -AM 530mA, 347-480V -AL 120o included -YM Yoke Mount -AN 350mA, 347-480V -AM 80o Forward Throw -CU Custom Mount 100% of Cireon's proprietary componentry is manufactured by US suppliers in US facilities. All final assembly done in the US. CASCADE SERIES - AREA AND SITE OVERVIEW The Cireon Cascade Series is the industry's longest lasting high performance solid state luminaires. With the best in thermal management, proprietary optics, and the highest quality componentry available, Cireon products provide beautifully uniform lighting while maintaining unmatched output over the industry's longest lifetimes. Part #: CA2-048-AG-AJ-AL-BZ-AF-NS Project: Notes: Date: FEATURES Thermal Management The industry's only combination of the superior thermal conductivity of an aluminum extrusion heat sink with a birdprotected ventilated housing. Dual-sided copper clad boards with thermally inductive interfaces optimize thermal conductivity. Tall, frequent fin geometry paired with largest in class LED spacing provides 15.1in2 convective surface area per LED. Optical Proprietary family of optics designed by Cireon for the specific output signature of the Luxeon LED combine class-leading efficiency and uniformity with soft, undetectable edges. Quality Componentry Philips Luxeon® LEDs, with the patented wafer-bonded design, provides the industry’s most efficient and robust designs all with half the thermal resistance of the next closest competitor. With over six decades of knowledge, the Philips Advance power supplies provide reliability, onboard thermal and electrical overload protection and the smoothest dimming available. System Watts: Luxeon LEDs: Delivered Lumens: Distribution: Color Temperature: Input Voltage: 78 48 7800 lm 120 degree 5700K 120-277V also available in 347-480V CRI: Mount: Integral Sensor: 75 Typ 2AF Slip Fitter No Sensor Housing Color: Architectural Bronze Mechanical available in White, Black, Bronze, and Custom Colors Dimensions: 10"W x 13"D x 5.6"H. Carton Weight: 17lbs.. EPA Rating- 1.02 Solid aluminum housing, baked powder coat finish on all exterior and interior surfaces. Stainless steel fasteners and hardware; no ferrous metals. Bayer Makrolon V-0 polycarbonate optics for superior chemical and impact resistance. Operating Temperature Range: -40oC/-40oF to 55oC/130oF. Electrical UL/cUL Wet Listed to UL 1598 and 8750. Driver reduces power if case temperature exceeds 80oC/176oF. Class A sound rating. 0-10V dimming standard, 100% to 10%, available with optional integral sensors. >0.9 power factor, <20% THD, RoHS. Standard 3kV surge suppression. Optional 20kV surge suppression. Spacing Criteria: Cireon's proprietary 120 degree reflector and lens optic assembly delivers an avg:min uniformity of better than 1.2:1 when spaced at 1.33 times the mounting height. At 2.07 times the mounting height, uniformity is better than 2:1. Your Authorized Cireon Agent Notes: (1) Combines LM-79 in situ at 25oC/76oF ambient and LM-80 data as published by Philips Lumileds in the DOE's TM-21 Calculation. Type III Type V Proven Longevity Mounting Options The Cascade family’s unified flow-through thermal management system provides a life expectancy of 201,000 to 440,000 hours to 70% output(1). Standard dard 2 2AF Slip Fitter (2-1/2" ID) TM-21 using Cireon LM-79 in situ and Lumileds LM-80 data: 60o 80o Standard Two and Four Bolt Arm Arms Standard Yoke Mount ount 120o 80o Forward Standard tandard Wall Pack Mount M Optional Integral Sensor Choose Occupancy, Photocell, or Hybrid d (combined). Suitable for mounting heights from 7' to 45';'; specify mounting height when ordering. custom mounts available (Example: CA2-048-AG-AJ-AL-WH-AF-PC) ORDERING INFORMATION Family CA Cascade No. of 24 LED Total LED Kelvin Temperature, Modules Count CRI (Typical) Drive Current, Input Voltage Optic, Included Angle Housing Color Mounting Method Integral Sensor 1 -024 -AG 5700K, 75CRI -AH 350mA, 120-277V -AB 80o included -BK Black -AF 2AF Slip Fitter -NS No Sensor 2 -048 -AH 4000K, 75CRI -AJ 530mA, 120-277V -AC 60o included -BZ Architectural Bronze -TB Two-Bolt Arm -WS With Sensor -AJ 5000K, 75CRI -AK 700mA, 120-277V -AF Type 3, wide rectangle -WH White -FB Four-Bolt Arm -PC Integral Photocell On/Off Only -AL 700mA, 347-480V -AG Type 5, wide square -CU Custom Colors -WM -CU Custom color temperature and CRI levels Wall Pack Flush Mount -AM 530mA, 347-480V -AL 120o included -YM Yoke Mount -AN 350mA, 347-480V -AM 80o Forward Throw -CU Custom Mount 100% of Cireon's proprietary componentry is manufactured by US suppliers in US facilities. All final assembly done in the US. CASCADE SERIES - AREA AND SITE OVERVIEW The Cireon Cascade Series is the industry's longest lasting high performance solid state luminaires. With the best in thermal management, proprietary optics, and the highest quality componentry available, Cireon products provide beautifully uniform lighting while maintaining unmatched output over the industry's longest lifetimes. Part #: CA2-048-AG-AH-AG-BZ-AF-NS Project: Notes: Date: FEATURES Thermal Management The industry's only combination of the superior thermal conductivity of an aluminum extrusion heat sink with a birdprotected ventilated housing. Dual-sided copper clad boards with thermally inductive interfaces optimize thermal conductivity. Tall, frequent fin geometry paired with largest in class LED spacing provides 15.1in2 convective surface area per LED. Optical Proprietary family of optics designed by Cireon for the specific output signature of the Luxeon LED combine class-leading efficiency and uniformity with soft, undetectable edges. Quality Componentry Philips Luxeon® LEDs, with the patented wafer-bonded design, provides the industry’s most efficient and robust designs all with half the thermal resistance of the next closest competitor. With over six decades of knowledge, the Philips Advance power supplies provide reliability, onboard thermal and electrical overload protection and the smoothest dimming available. System Watts: Luxeon LEDs: Delivered Lumens: Distribution: Color Temperature: Input Voltage: 50 48 5050 lm Type V 5700K 120-277V also available in 347-480V CRI: Mount: Integral Sensor: 75 Typ 2AF Slip Fitter No Sensor Housing Color: Architectural Bronze Mechanical available in White, Black, Bronze, and Custom Colors Dimensions: 10"W x 13"D x 5.6"H. Carton Weight: 17lbs.. EPA Rating- 1.02 Solid aluminum housing, baked powder coat finish on all exterior and interior surfaces. Stainless steel fasteners and hardware; no ferrous metals. Bayer Makrolon V-0 polycarbonate optics for superior chemical and impact resistance. Operating Temperature Range: -40oC/-40oF to 55oC/130oF. Electrical UL/cUL Wet Listed to UL 1598 and 8750. Driver reduces power if case temperature exceeds 80oC/176oF. Class A sound rating. 0-10V dimming standard, 100% to 10%, available with optional integral sensors. >0.9 power factor, <20% THD, RoHS. Standard 3kV surge suppression. Optional 20kV surge suppression. Spacing Criteria: Cireon's proprietary Type 5 free form optic delivers an avg:min uniformity of better than 1.2:1 when spaced at 3.0 x 3.0 times the mounting height. At 4.2 x 4.2 times the mounting height, uniformity is better than 2:1. Your Authorized Cireon Agent Notes: (1) Combines LM-79 in situ at 25oC/76oF ambient and LM-80 data as published by Philips Lumileds in the DOE's TM-21 Calculation. Type III Type V Proven Longevity Mounting Options The Cascade family’s unified flow-through thermal management system provides a life expectancy of 201,000 to 440,000 hours to 70% output(1). Standard dard 2 2AF Slip Fitter (2-1/2" ID) TM-21 using Cireon LM-79 in situ and Lumileds LM-80 data: 60o 80o Standard Two and Four Bolt Arm Arms Standard Yoke Mount ount 120o 80o Forward Standard tandard Wall Pack Mount M Optional Integral Sensor Choose Occupancy, Photocell, or Hybrid d (combined). Suitable for mounting heights from 7' to 45';'; specify mounting height when ordering. custom mounts available (Example: CA2-048-AG-AJ-AL-WH-AF-PC) ORDERING INFORMATION Family CA Cascade No. of 24 LED Total LED Kelvin Temperature, Modules Count CRI (Typical) Drive Current, Input Voltage Optic, Included Angle Housing Color Mounting Method Integral Sensor 1 -024 -AG 5700K, 75CRI -AH 350mA, 120-277V -AB 80o included -BK Black -AF 2AF Slip Fitter -NS No Sensor 2 -048 -AH 4000K, 75CRI -AJ 530mA, 120-277V -AC 60o included -BZ Architectural Bronze -TB Two-Bolt Arm -WS With Sensor -AJ 5000K, 75CRI -AK 700mA, 120-277V -AF Type 3, wide rectangle -WH White -FB Four-Bolt Arm -PC Integral Photocell On/Off Only -AL 700mA, 347-480V -AG Type 5, wide square -CU Custom Colors -WM -CU Custom color temperature and CRI levels Wall Pack Flush Mount -AM 530mA, 347-480V -AL 120o included -YM Yoke Mount -AN 350mA, 347-480V -AM 80o Forward Throw -CU Custom Mount 100% of Cireon's proprietary componentry is manufactured by US suppliers in US facilities. All final assembly done in the US. CASCADE SERIES - AREA AND SITE OVERVIEW The Cireon Cascade Series is the industry's longest lasting high performance solid state luminaires. With the best in thermal management, proprietary optics, and the highest quality componentry available, Cireon products provide beautifully uniform lighting while maintaining unmatched output over the industry's longest lifetimes. Part #: CA2-048-AG-AH-AF-BZ-AF-NS Project: Notes: Date: FEATURES Thermal Management The industry's only combination of the superior thermal conductivity of an aluminum extrusion heat sink with a birdprotected ventilated housing. Dual-sided copper clad boards with thermally inductive interfaces optimize thermal conductivity. Tall, frequent fin geometry paired with largest in class LED spacing provides 15.1in2 convective surface area per LED. Optical Proprietary family of optics designed by Cireon for the specific output signature of the Luxeon LED combine class-leading efficiency and uniformity with soft, undetectable edges. Quality Componentry Philips Luxeon® LEDs, with the patented wafer-bonded design, provides the industry’s most efficient and robust designs all with half the thermal resistance of the next closest competitor. With over six decades of knowledge, the Philips Advance power supplies provide reliability, onboard thermal and electrical overload protection and the smoothest dimming available. System Watts: Luxeon LEDs: Delivered Lumens: Distribution: Color Temperature: Input Voltage: 50 48 4950 lm Type III 5700K 120-277V also available in 347-480V CRI: Mount: Integral Sensor: 75 Typ 2AF Slip Fitter No Sensor Housing Color: Architectural Bronze Mechanical available in White, Black, Bronze, and Custom Colors Dimensions: 10"W x 13"D x 5.6"H. Carton Weight: 17lbs.. EPA Rating- 1.02 Solid aluminum housing, baked powder coat finish on all exterior and interior surfaces. Stainless steel fasteners and hardware; no ferrous metals. Bayer Makrolon V-0 polycarbonate optics for superior chemical and impact resistance. Operating Temperature Range: -40oC/-40oF to 55oC/130oF. Electrical UL/cUL Wet Listed to UL 1598 and 8750. Driver reduces power if case temperature exceeds 80oC/176oF. Class A sound rating. 0-10V dimming standard, 100% to 10%, available with optional integral sensors. >0.9 power factor, <20% THD, RoHS. Standard 3kV surge suppression. Optional 20kV surge suppression. Spacing Criteria: Cireon's proprietary Type 3 free form optic delivers an avg:min uniformity of better than 1.2:1 when spaced at 2.5 x 4.0 times the mounting height. At 3.1 x 5.4 times the mounting height, uniformity is better than 2:1. Your Authorized Cireon Agent Notes: (1) Combines LM-79 in situ at 25oC/76oF ambient and LM-80 data as published by Philips Lumileds in the DOE's TM-21 Calculation. Type III Type V Proven Longevity Mounting Options The Cascade family’s unified flow-through thermal management system provides a life expectancy of 201,000 to 440,000 hours to 70% output(1). Standard dard 2 2AF Slip Fitter (2-1/2" ID) TM-21 using Cireon LM-79 in situ and Lumileds LM-80 data: 60o 80o Standard Two and Four Bolt Arm Arms Standard Yoke Mount ount 120o 80o Forward Standard tandard Wall Pack Mount M Optional Integral Sensor Choose Occupancy, Photocell, or Hybrid d (combined). Suitable for mounting heights from 7' to 45';'; specify mounting height when ordering. custom mounts available (Example: CA2-048-AG-AJ-AL-WH-AF-PC) ORDERING INFORMATION Family CA Cascade No. of 24 LED Total LED Kelvin Temperature, Modules Count CRI (Typical) Drive Current, Input Voltage Optic, Included Angle Housing Color Mounting Method Integral Sensor 1 -024 -AG 5700K, 75CRI -AH 350mA, 120-277V -AB 80o included -BK Black -AF 2AF Slip Fitter -NS No Sensor 2 -048 -AH 4000K, 75CRI -AJ 530mA, 120-277V -AC 60o included -BZ Architectural Bronze -TB Two-Bolt Arm -WS With Sensor -AJ 5000K, 75CRI -AK 700mA, 120-277V -AF Type 3, wide rectangle -WH White -FB Four-Bolt Arm -PC Integral Photocell On/Off Only -AL 700mA, 347-480V -AG Type 5, wide square -CU Custom Colors -WM -CU Custom color temperature and CRI levels Wall Pack Flush Mount -AM 530mA, 347-480V -AL 120o included -YM Yoke Mount -AN 350mA, 347-480V -AM 80o Forward Throw -CU Custom Mount 100% of Cireon's proprietary componentry is manufactured by US suppliers in US facilities. All final assembly done in the US. ONTARIO SERIES - HIGH BAY OVERVIEW The Cireon Ontario Series high bays are the industry's longest lasting high performance solid state luminaires. With the best in thermal management, proprietary optics, and the highest quality componentry available, Cireon products provide beautifully uniform lighting while maintaining unmatched output over the industry's longest lifetimes. Part #: ON3-072-AG-AK-AB-WH-SF-NS Project: Notes: Date: FEATURES Thermal Management One-piece extruded aluminum heat sink and dual-sided copper clad boards with thermally inductive interfaces optimize thermal conductivity. Tall, frequent fin geometry paired with largest in class LED spacing provides 15.1in2 convective surface area per LED. Flow through design promotes continuous movement of fresh air into fins and around all six sides of the power supply. Optical Proprietary freeform low bay optics designed by Cireon for the specific output signature of the Luxeon LED combine classleading efficiency and uniformity with soft, undetectable edges. Quality Componentry Philips Luxeon® LEDs, with the patented wafer-bonded design, provides the industry’s most efficient and robust designs all with half the thermal resistance of the next closest competitor. With over six decades of knowledge, the Philips Advance power supplies provide reliability, onboard thermal and electrical overload protection and the smoothest dimming available. System Watts: Luxeon LEDs: Delivered Lumens: Distribution: Color Temperature: Input Voltage: 146 72 13724 lm 80 degree 5700K 120-277V also available in 347-480V CRI: 75 Typ Integral Sensor: Excluded Housing Color: White Also available in Steel Gray Mechanical Housing Dimensions: Ontario 2 & 3: 13.5"W x 18.5"L x 3.5" H Carton Weight: 21lbs. Ontario 4, 6 & 8: 18.5"W x 23.5"L x 3.5" H Carton Weight: 38lbs. Solid aluminum housing, baked powder coat finish on all exterior and interior surfaces. Stainless steel fasteners and hardware; no ferrous metals. Bayer Makrolon V-0 polycarbonate optics for superior chemical and impact resistance. Operating Temperature Range: -40oC/-40oF to 55oC/130oF. Electrical UL/cUL Listed to UL 1598 and 8750. Driver reduces power if case temperature exceeds 80oC/176oF. Class A sound rating. 0-10V dimming standard, 100% to 10%, available with optional integral sensors. >0.9 power factor, <20% THD, RoHS. Standard 3kV surge suppression. Optional 20kV surge suppression. Spacing Criteria: Cireon's proprietary 80 degree multi-arrayed optic delivers an avg:min uniformity of better than 1.1:1 when spaced at 1.15 times the mounting height. At 1.37 times the mounting height, uniformity is better than 1.8:1. See Cireon Low Bays for additional optic options. Your Authorized Cireon Agent Notes: (1) Combines LM-79 in situ at 25oC/76oF ambient and LM-80 data as published by Philips Lumileds in the DOE's TM-21 Calculation. Optics Proven Longevity Mounting Options The Ontario family’s unified thermal management system provides a life expectancy of 201,000 to 440,000 hours to 70% of original output(1). Standard Flush Mount (to J-box) 60o TM-21 using Cireon LM-79 in situ and Lumileds LM-80 data: Standard Flush Mount (to Meyers Hub) 80o Standard Cable Mount cables and hardware not included 80o Forward 120o Optional Integral Sensor; High Bay Additional coverage patterns available. Optional Trunnion Mount (Example: ON4-096-AG-AK-AF-WH-SF-WS) ORDERING INFORMATION Family ON Ontario No. of 24 LED Total LED Kelvin Temperature, Modules Count CRI (Typical) Drive Current, Input Voltage Optic, Included Angle 120 o -AA included Textured 2 -048 -AG 5700K, 75CRI -AH 350mA, 120-277V 3 -072 -AH 4000K, 75CRI -AJ 530mA, 120-277V -AB 4 -096 -AJ 5000K, 75CRI -AK 700mA, 120-277V -AC 6 -144 -AL 700mA, 347-480V -AF -CU 8 -192 Custom color temperatures and CRI levels -AM 530mA, 347-480V -AG -AN 350mA, 347-480V -AL Housing Color Mounting Method -SG Steel Gray -CC 110V Plug with 10’ XO Cord 80 o included -WH White -TR Trunnion Mount 60 o included -CU Custom Colors -SF Standard Flush to J-box or with Meyers Hub -CU Custom Mount Type 3, wide rectangle Type 5, wide square Integral Sensor -NS No Sensor -WS With Sensor 120 o included 100% of Cireon's proprietary componentry is manufactured by US suppliers in US facilities. All final assembly done in the US. X 985 892.5 0 774 1562 1099.5 1099.5 411.5 411.5 1760.5 315 315 504 504 83 83 -114 1358.5 17.5 17.5 729.5 729.5 1098.5 1098.5 1006.5 182 1672.5 1672.5 -55.5 -55.5 622.5 100.5 100.5 233.5 807.5 1480 1480 1286.5 285 285 -128 -128 33 33 1098.5 1098.5 260 467 467 1030 Label Cascade 2-5-120C Cascade 2-5-T3 Cascade 2-5-T5 Cascade 3-7-120C Cascade 3-7-T3 Cascade 3-7-T5 Luminaire Location Summary LumNo Label 1 Cascade 2-5-120C 2 Cascade 2-5-T3 3 Cascade 2-5-T3 4 Cascade 2-5-T3 5 Cascade 2-5-T3 6 Cascade 2-5-T3 7 Cascade 2-5-T3 8 Cascade 2-5-T3 9 Cascade 2-5-T3 10 Cascade 2-5-120C 11 Cascade 2-5-T3 12 Cascade 2-5-T3 13 Cascade 2-5-T3 14 Cascade 2-5-T3 15 Cascade 2-5-T3 16 Cascade 2-5-T3 17 Cascade 2-5-T3 18 Cascade 2-5-T3 19 Cascade 2-5-T3 20 Cascade 2-5-T3 21 Cascade 2-5-T3 22 Cascade 2-5-T3 23 Cascade 2-5-T3 24 Cascade 2-5-T3 25 Cascade 2-5-120C 26 Cascade 2-5-T3 27 Cascade 2-5-T5 28 Cascade 2-5-T5 29 Cascade 2-5-T3 30 Cascade 2-5-T3 31 Cascade 2-5-T3 32 Cascade 2-5-T3 33 Cascade 2-5-T3 34 Cascade 2-5-T3 35 Cascade 2-5-T3 36 Cascade 2-5-T5 37 Cascade 2-5-T5 38 Cascade 2-5-T5 39 Cascade 2-5-T5 40 Cascade 2-5-T5 41 Cascade 2-5-T3 42 Cascade 2-5-T3 43 Cascade 2-5-T3 44 Cascade 2-5-T3 45 Cascade 2-5-T3 46 Cascade 2-5-T3 47 Cascade 2-5-T3 48 Cascade 2-5-T3 49 Cascade 2-5-T3 50 Cascade 2-5-T3 Luminaire Schedule Symbol Qty 4 113 45 2 22 30 Y -4.5 -3 0 2 2 3 3 22.5 22.5 22 23.5 23.5 26 26 27 27 31.5 40 48.5 48.5 49.5 49.5 49.5 49.5 57.5 58.5 69.5 69.5 72 72 72.5 84 84 86 86.5 89 89 90.5 92.5 92.5 97 97 104 104 109.5 109.5 119.5 124 124 124 Z 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Orient 122.229 88.409 89.552 91.736 90 180 0 270 89.552 180.924 270 89.552 89.552 270 70 250 69.507 45 250 70 89.552 270 180 0 180 172.405 45 225 250 70 102.848 70 250 199.722 139.97 45 225 45 89.552 270 70 250 70 250 0 180 342.3 270 89.552 88.668 Description CA2-048-AG-AJ-AL CA2-048-AG-AJ-AF CA2-048-AG-AJ-AG CA3-072-AG-AK-AL CA3-072-AG-AK-AF CA3-072-AG-AK-AG Tilt 25 12 0 12 12 0 0 0 0 12 0 0 0 0 0 0 0 12 0 0 0 0 0 0 25 0 5 5 0 0 0 0 0 0 0 5 5 12 0 0 0 0 0 0 0 0 0 0 0 0 X 965 408.5 408.5 -41 -41 565 565 332 332 118 118 649 649 766 766 857 -111 -111 1096.5 1096.5 1136 1136 1028 1028 51.5 51.5 1567 1567 1391 1391 487 487 -17 -17 409.5 409.5 571.5 571.5 274 274 338 338 652.5 652.5 -83.5 -83.5 214 721.5 721.5 133 Total Watts 312 8814 3510 292 3212 4380 Luminaire Location Summary LumNo Label 51 Cascade 2-5-T3 52 Cascade 2-5-T3 53 Cascade 2-5-T3 54 Cascade 2-5-T3 55 Cascade 2-5-T3 56 Cascade 2-5-T3 57 Cascade 2-5-T3 58 Cascade 2-5-T3 59 Cascade 2-5-T3 60 Cascade 2-5-T3 61 Cascade 2-5-T3 62 Cascade 2-5-T3 63 Cascade 2-5-T3 64 Cascade 2-5-T3 65 Cascade 2-5-T3 66 Cascade 2-5-T3 67 Cascade 2-5-T3 68 Cascade 2-5-T3 69 Cascade 2-5-T3 70 Cascade 2-5-T3 71 Cascade 2-5-T3 72 Cascade 2-5-T3 73 Cascade 2-5-T3 74 Cascade 2-5-T3 75 Cascade 2-5-T3 76 Cascade 2-5-T3 77 Cascade 2-5-T3 78 Cascade 2-5-T3 79 Cascade 2-5-T5 80 Cascade 2-5-T5 81 Cascade 2-5-T3 82 Cascade 2-5-T3 83 Cascade 2-5-T3 84 Cascade 2-5-T3 85 Cascade 2-5-T3 86 Cascade 2-5-T3 87 Cascade 2-5-T3 88 Cascade 2-5-T3 89 Cascade 2-5-T3 90 Cascade 2-5-T3 91 Cascade 2-5-T3 92 Cascade 2-5-T3 93 Cascade 2-5-T3 94 Cascade 2-5-T3 95 Cascade 2-5-T3 96 Cascade 2-5-T3 97 Cascade 2-5-T5 98 Cascade 2-5-T3 99 Cascade 2-5-T3 100 Cascade 2-5-T3 Lum. Watts 78 78 78 146 146 146 Z 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Orient 90.868 270 89.552 250 70 280 100 89.552 270 70 250 280 100 110 290 72.897 70 250 90 270 90 270 90 270 70 250 225 45 225 45 270 89.552 70 250 89.552 270 100 280 165.809 342.3 270 89.552 280 100 250 70 75.964 290 110 70 Tilt 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 12 12 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 Luminaire Location Summary LumNo Label 101 Cascade 2-5-T5 102 Cascade 2-5-T5 103 Cascade 2-5-T5 104 Cascade 2-5-T5 105 Cascade 2-5-120C 106 Cascade 2-5-T3 107 Cascade 2-5-T5 108 Cascade 2-5-T5 109 Cascade 2-5-T5 110 Cascade 2-5-T5 111 Cascade 2-5-T5 112 Cascade 2-5-T5 113 Cascade 2-5-T5 114 Cascade 2-5-T5 115 Cascade 2-5-T3 116 Cascade 2-5-T3 117 Cascade 2-5-T5 118 Cascade 2-5-T5 119 Cascade 2-5-T5 120 Cascade 2-5-T3 121 Cascade 2-5-T5 122 Cascade 2-5-T5 123 Cascade 2-5-T3 124 Cascade 2-5-T3 125 Cascade 2-5-T5 126 Cascade 2-5-T5 127 Cascade 2-5-T3 128 Cascade 2-5-T3 129 Cascade 2-5-T5 130 Cascade 2-5-T5 131 Cascade 2-5-T3 132 Cascade 2-5-T5 133 Cascade 2-5-T5 134 Cascade 2-5-T3 135 Cascade 2-5-T3 136 Cascade 2-5-T3 137 Cascade 2-5-T3 138 Cascade 2-5-T5 139 Cascade 2-5-T5 140 Cascade 2-5-T3 141 Cascade 2-5-T5 142 Cascade 2-5-T5 143 Cascade 2-5-T3 144 Cascade 2-5-T3 145 Cascade 2-5-T5 146 Cascade 2-5-T5 147 Cascade 2-5-T5 148 Cascade 2-5-T5 149 Cascade 2-5-T3 150 Cascade 2-5-T3 X 428.5 38.5 564 343 -63.5 -63.5 635 1584.5 417.5 525.5 587 352 1461.5 1461.5 291 291 162.5 162.5 1512 -72 38.5 38.5 426.5 426.5 569 569 304.5 304.5 191.5 191.5 -54.5 68 68 437 437 334 334 563 563 -33.5 214 214 436.5 436.5 93 93 534.5 534.5 -11 351 Y 249 253 253 256.5 258.5 258.5 266 266.5 273.5 275 280.5 281 281 281 301 301 327.5 327.5 371.5 373.5 374 374 385.5 385.5 391 391 398 398 430 430 436 477.5 477.5 492.5 492.5 503 503 512.5 512.5 519 539 539 586 586 587 587 593.5 593.5 595 614.5 Z 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Orient 268.636 70 275.774 264.447 70 250 291.105 225 88.603 92.291 101.535 81.674 225 45 250 70 70 250 60 347.093 70 250 250 70 70 250 250 70 70 250 347.093 250 70 250 70 250 70 70 250 347.093 70 250 250 70 250 70 70 250 347.093 250 Tilt 10 10 10 10 30 0 10 12 10 10 10 10 5 5 10 10 12 12 0 12 12 12 10 10 10 10 10 10 10 10 0 12 12 12 12 12 12 10 10 12 12 12 10 10 10 10 10 10 0 10 Results indicated are based upon data provided to Cireon. The intensity, distribution, and uniformity shown are based upon the dimensional and reflectance parameters indicated. Field results will be based upon the actual parameters of the space and the objects within. It is the customers responsibility to assess the accuracy of the assumed parameters and their affect upon field results. Y 124.5 125.5 125.5 127.5 127.5 128 128 132.5 132.5 141 141 143.5 143.5 145.5 145.5 151.5 154 154 160 160 160 160 160.5 160.5 162.5 162.5 175.5 175.5 181.5 181.5 182.5 182.5 183 183 185.5 185.5 190 190 191.5 191.5 193.5 193.5 203.5 203.5 205 205 215.5 218 218 223 Notes: 1. No natural light used in foot-candle calculations. 2. No artificial light beyond luminaires shown used in foot-candle calculations. (i.e. adjacent streetlights, wall washers, bollards, canopy, interior spillover, etc.) 3. Unless otherwise noted, all foot-candle data is at 0' AFG (on flat ground). SANTIAGO CANYON COLLEGE EXTERIOR LOT PHOTOMETRICS Luminaire Location Summary LumNo Label 151 Cascade 2-5-T3 152 Cascade 2-5-T5 153 Cascade 2-5-T5 154 Cascade 2-5-T3 155 Cascade 2-5-T3 156 Cascade 2-5-T3 157 Cascade 2-5-T5 158 Cascade 2-5-T5 159 Cascade 2-5-T3 160 Cascade 2-5-T3 161 Cascade 2-5-T3 162 Cascade 3-7-T3 163 Cascade 3-7-T3 164 Cascade 2-5-T3 165 Cascade 3-7-T3 166 Cascade 3-7-T3 167 Cascade 3-7-120C 168 Cascade 3-7-T3 169 Cascade 3-7-T3 170 Cascade 3-7-T5 171 Cascade 3-7-T5 172 Cascade 3-7-T3 173 Cascade 3-7-T3 174 Cascade 3-7-T3 175 Cascade 3-7-T3 176 Cascade 3-7-120C 177 Cascade 3-7-T3 178 Cascade 3-7-T3 179 Cascade 3-7-T5 180 Cascade 3-7-T5 181 Cascade 3-7-T5 182 Cascade 3-7-T5 183 Cascade 3-7-T3 184 Cascade 3-7-T3 185 Cascade 3-7-T5 186 Cascade 3-7-T3 187 Cascade 3-7-T3 188 Cascade 3-7-T3 189 Cascade 3-7-T5 190 Cascade 3-7-T5 191 Cascade 3-7-T5 192 Cascade 3-7-T3 193 Cascade 3-7-T3 194 Cascade 3-7-T3 195 Cascade 3-7-T5 196 Cascade 3-7-T5 197 Cascade 3-7-T3 198 Cascade 3-7-T5 199 Cascade 3-7-T5 200 Cascade 3-7-T5 X 351 239.5 239.5 454.5 386.5 14 115.5 115.5 316 219 128 1545.5 1545.5 36.5 1592 1592 648.5 1509.5 1509.5 403.5 403.5 1552.5 1552.5 272.5 272.5 549.5 1435 1435 158 158 459.5 459.5 1348.5 1348.5 320 320 1250 1250 191 191 510.5 510.5 1146 1146 370 370 641.5 240 240 542.5 Y 614.5 645.5 645.5 668.5 677 685 692 692 692.5 726 770.5 774 774 813.5 817 817 820.5 842 842 855 855 885 885 903.5 903.5 921.5 936.5 936.5 953 953 972.5 972.5 1009.5 1009.5 1018.5 1018.5 1064 1064 1079.5 1079.5 1088.5 1088.5 1097.5 1097.5 1135.5 1135.5 1176.5 1199.5 1199.5 1210 Z 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Orient 70 70 250 90 75 347.093 70 250 70 65 60 205 25 60 210 30 132.58 215 35 70 250 30 210 250 70 320 220 40 250 70 70 250 230 50 70 250 240 60 250 70 250 70 260 80 70 250 316.332 70 250 70 Tilt 10 12 12 12 12 10 12 12 12 12 12 10 10 12 10 10 25 10 10 12 12 10 10 12 12 25 10 10 12 12 12 12 10 10 10 12 10 10 12 12 12 12 10 10 12 12 12 12 12 12 Luminaire Location Summary LumNo Label 201 Cascade 3-7-T5 202 Cascade 3-7-T5 203 Cascade 3-7-T5 204 Cascade 3-7-T5 205 Cascade 3-7-T5 206 Cascade 3-7-T5 207 Cascade 3-7-T5 208 Cascade 3-7-T5 209 Cascade 3-7-T5 210 Cascade 3-7-T5 211 Cascade 3-7-T5 212 Cascade 3-7-T3 213 Cascade 3-7-T5 214 Cascade 3-7-T5 215 Cascade 3-7-T5 216 Cascade 3-7-T5 X 542.5 413 413 271.5 271.5 589 589 458.5 458.5 327.5 327.5 634 504.5 504.5 385.5 385.5 Z 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Orient 250 250 70 250 70 70 250 250 70 70 250 232.306 250 70 250 70 Tilt 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Results indicated are based upon data provided to Cireon. The intensity, distribution, and uniformity shown are based upon the dimensional and reflectance parameters indicated. Field results will be based upon the actual parameters of the space and the objects within. It is the customers responsibility to assess the accuracy of the assumed parameters and their affect upon field results. Y 1210 1257 1257 1323.5 1323.5 1327.5 1327.5 1372.5 1372.5 1436 1436 1452 1488.5 1488.5 1550 1550 0.8 17 1.0 1.7 1.1 1.1 0.8 0.5 2.4 1.9 42 41 1 1.5 2.0 1.8 3.3 3.1 3.0 1.8 2.2 2.3 3.0 2.1 1.5 2.6 68 67 2.1 2.0 2.2 2.6 1.3 2.4 1.7 2.4 2.6 1.6 2.1 2.2 1.2 1.4 1.3 0.9 0.8 0.9 0.8 0.7 0.6 1120 1.0 1.1 0.9 0.8 3.1 2.9 55 54 2.2 3.1 3.5 3.6 3.5 2.0 3.3 1.3 0.7 1.0 2.4 0.9 1.5 2.8 30 2.2 2.129 3.0 3.3 3.3 3.6 3.6 3.4 2.8 2.3 4.4 106 105 2.4 1.4 3.0 1.7 1.7 1.4 2.3 3.3 3.3 3.5 3.5 3.3 3.2 2.5 96 95 1.9 2.2 1.6 3.0 1.3 0.6 1.4 2.3 3.3 3.4 3.5 3.3 2.5 3.1 2.7 84 83 2.4 2.6 1.1 1 3 1.3 2.7 3.1 3.6 3.5 3.3 3.4 3.3 2.9 2.4 1.8 0.7 0.8 0.8 1.6 0.5 0.4 0.6 1.1 1.0 0.7 0.6 0.6 0.7 0.8 0.5 0.5 0.5 0.7 0.8 0.9 1.1 1.2 1.4 1.1 1.2 1.9 1.2 1131 1.1 1.2 1.0 1.1 1.6 1.4 1.6 0.7 1.5 0.9 140 1 0.9 1.9 2.9 20 19 2.2 3.2 3.1 3.0 3.4 3.5 3.5 3.2 1.2 1.0 1.3 0.9 0.6 0.4 0.5 1.2 1.9 1.9 0.9 0.5 0.5 0.7 0.8 0.6 0.6 0.8 1.0 1.1 1.2 1.2 2.6 3.8 3.0 3.4 2.6 44 43 2.2 3.1 2.9 3.1 2.7 0.8 1.6 1102 1.5 1.0 0.5 0.4 0.5 2.1 122 121 3.0 2.4 0.9 0.5 0.7 1.5 1.6 0.9 0.5 0.5 0.6 0.7 0.7 0.8 0.9 0.8 1.2 1.0 1.2 0.5 0.7 2.8 3.8 3.9 3.7 3.6 3.3 3.1 2.4 76 75 2.1 1.8 0.7 1.1 0.8 0.5 0.4 0.6 1.7 2.1 2.1 0.6 0.5 1.3 2.5 2.2 1.2 0.4 0.5 1.0 1.4 1.1 0.6 0.5 0.6 0.7 0.7 0.5 0.9 1.3 0.2 0.2 0.7 0.2 164 0.5 0.3 0.9 1156 1.2 1.5 1.5 0.9 1.3 1.3 149 1 0.8 0.7 1 0.4 0.4 0.2 2.7 0.4 0.9 0.7 0.5 0.4 0.5 1.1 1.4 0.9 0.4 0.5 1.7 16 15 2.3 2.4 3.3 3.4 3.5 3.7 3.6 3.5 3.0 1.3 133 132 2.6 0.9 0.5 0.7 2.2 2.0 1.6 0.7 0.5 0.7 1.3 1.1 0.5 0.3 0.6 0.8 0.5 3.2 2.1 2.0 2.8 2.3 33 32 2.2 3.1 3.3 3.4 2.9 0.7 0.5 0.9 0.7 0.5 0.4 0.4 0.5 0.6 0.5 0.4 0.5 1.3 1.9 1.6 0.5 0.5 1.0 2.4 146 145 2.1 0.6 0.5 1.5 2.0 1.8 0.7 0.3 0.9 0.8 0.4 2.0 0.6 0.6 0.3 1.8 2.3 2.3 2.3 2.1 2.6 2.1 61 60 2.1 1.8 0.4 1.3 1.0 0.6 0.4 0.6 0.8 0.7 0.4 0.4 0.4 0.4 0.7 0.9 0.7 0.4 0.4 1.0 1.8 1.9 1.2 0.5 0.6 2.5 158 157 2.9 2.4 0.6 0.8 1.0 0.5 0.9 1.4 1.6 1.8 2.3 2.3 2.3 2.0 1.0 0.4 1100 0.8 0.7 0.5 0.5 1.4 1.9 1.4 0.6 0.4 0.5 0.6 0.5 0.4 0.4 0.4 0.4 0.6 1.0 1.2 0.6 0.4 0.7 1.7 2.0 1.6 0.8 1.5 1.4 1.5 1.7 1.6 1.7 1.7 0.5 1.0 0.7 0.5 0.7 2.5 0.7 1.3 1.0 0.5 1.5 0.7 1.2 1.1 0.8 0.6 0.8 1.5 1.6 0.8 0.5 0.9 2.3 2.9 130 129 2.4 0.7 0.5 1.0 2.2 1.9 1.2 0.4 0.4 0.7 1.0 0.7 0.4 0.7 1.0 1.4 0.3 0.6 1.2 1.7 1.7 1.7 1.0 0.6 0.7 1 97 1.3 0.8 0.5 0.5 0.7 0.7 0.5 0.5 0.9 1.8 1.9 1.4 0.6 0.5 1.6 3.0 142 141 2.8 1.2 0.5 0.6 1.6 1.9 1.1 0.5 0.5 0.8 3.6 3.6 2.7 0.9 0.5 0.4 0.7 0.4 0.8 1.5 34 2.0 1.6 1.5 1.5 1.3 1.0 0.7 0.5 0.6 0.8 0.7 0.5 0.5 0.8 1.2 1.2 0.7 0.5 0.6 1.4 1.9 2.0 0.7 0.5 0.9 2.6 153 152 2.8 1.8 0.7 0.7 1.0 0.8 0.5 0.4 0.4 0.4 0.5 1.2 2.7 2.8 1.7 0.6 0.5 0.8 3.6 205 204 4.4 3.6 1.1 0.5 0.4 0.7 1.6 2.3 2.5 3.3 2.4 0.7 0.5 0.5 0.5 0.5 0.4 0.5 0.5 0.5 0.4 0.5 0.8 1.9 2.4 1.4 0.6 0.5 0.9 2.8 2.9 2.2 0.7 0.4 128 127 2.1 1.5 3.2 3.0 2.8 2.7 3.0 3.0 1.7 1.7 3.3 2.2 0.8 0.7 1.5 2.0 1.9 0.7 0.4 0.6 1.7 2.5 1.4 0.5 0.4 0.7 1.7 1.6 1.0 1.0 1.7 12 11 0.3 0.3 0.9 1.0 2.3 1.7 0.9 2.7 59 58 2.2 2.8 2.7 92 91 2.1 2.4 1.5 2.4 0.4 1.7 1.4 0.6 0.5 0.6 1.5 4.1 196 195 4.3 2.7 0.6 0.5 0.5 0.9 1.3 0.9 0.5 0.4 0.4 0.4 0.5 1.0 1.9 1.9 0.8 0.5 0.5 1.4 3.2 2.9 0.4 1.7 0.6 0.5 0.5 0.5 1.8 3.1 3.7 1.8 0.6 0.5 0.7 2.3 2.9 2.1 0.7 0.5 0.4 0.4 0.4 0.4 0.7 0.7 0.5 0.5 0.6 2.4 4.7 216 215 4.2 2.4 2.4 1.1 3.2 3.2 2.9 2.6 1.4 2.2 1.2 0.7 0.5 0.6 1.3 2.2 1.7 0.7 0.5 0.9 1.8 1.6 0.9 0.7 1.3 0.4 0.4 0.4 0.5 1.1 2.1 2.1 0.8 0.5 0.6 1.2 3.9 203 202 4.2 2.8 0.7 0.5 0.5 0.8 0.9 0.6 0.4 0.4 0.4 0.5 0.6 2.1 2.9 4.8 2.4 0.6 0.5 0.5 0.7 0.9 0.6 1.1 2.2 1.4 0.4 1.2 2.6 0.3 0.9 3.2 1.1 1.7 9 8 1.4 0.4 1.3 2.8 53 52 2.7 3.5 2.7 86 85 2.3 2.4 1.4 2.8 1109 1.2 0.6 0.5 0.7 1.8 2.0 1.7 0.6 0.5 0.9 2.6 2.5 0.9 0.8 1.6 2.7 2.3 0.8 1.4 1.5 1.0 0.5 0.4 1.7 4.0 171 170 1.1 2.6 1155 1.2 1.0 0.6 0.4 0.9 3.4 3.0 2.2 0.7 0.5 0.5 0.5 0.4 0.6 1.1 2.2 1.5 0.3 0.9 3.0 3.3 3.4 3.7 3.7 3.2 1.4 2.1 1.4 0.8 0.6 0.6 0.8 1.3 1.0 0.6 0.6 1.2 1.9 1.5 0.7 0.5 1.0 2.4 2.8 1.5 1.4 0.7 0.5 1.5 2.0 1.3 0.6 0.5 0.4 0.5 0.8 1.5 1.0 2.2 1.5 0.4 2.7 3.2 3.4 3.1 3.1 3.0 1.5 2.2 1 112 1.0 0.6 0.7 1.0 1.3 0.8 0.5 0.5 1.2 2.6 2.0 0.7 0.4 0.6 1.6 1.8 151 150 1.8 0.8 2.0 2.0 1.4 1104 2.3 2.6 1.4 0.7 0.7 1.7 2.2 1.4 0.5 0.4 0.8 2.1 137 136 2.0 0.9 0.4 0.5 1.0 2.2 2.4 0.9 1.8 1.0 0.8 0.8 0.4 0.3 0.4 0.6 0.8 0.7 0.6 0.4 0.3 0.5 1.6 3.0 3.1 1.0 0.6 0.6 0.8 2.6 2.9 2.1 0.7 0.5 0.4 0.5 0.4 0.3 0.3 0.4 0.4 0.4 0.5 1.7 3.0 3.5 1.7 0.5 0.5 0.6 1.6 1.7 0.4 0.7 1.1 1.3 0.7 0.4 0.4 1.6 3.1 4.1 1.9 0.7 0.5 0.5 1.1 1.5 1.0 0.5 0.4 0.4 0.4 0.3 0.4 0.7 0.8 0.6 0.5 0.5 1.5 4.1 211 210 4.6 2.7 0.6 0.4 0.4 0.5 0.5 186 185 1159 0.9 0.5 0.4 0.9 2.5 3.1 1.1 0.5 0.4 1.0 3.2 0.9 2.2 2.0 3.7 3.6 3.5 3.2 3.3 3.6 2.0 1.2 2.2 116 115 2.1 1.0 0.6 1.0 2.0 2.1 1.0 0.4 0.4 1.0 1.6 1.2 0.5 0.4 0.5 0.9 1.0 0.8 0.7 1.0 40 3.7 39 3.6 3.3 3.6 3.4 90 89 1.9 2.4 1.4 0.6 0.7 1.9 2.1 1.2 0.5 0.4 0.6 0.8 0.7 0.6 0.5 0.5 0.9 1.5 1.4 0.7 1.0 0.6 0.3 0.2 0.8 0.8 2.9 3.0 1.9 0.7 0.4 0.6 2.0 2.6 2.1 0.6 0.4 0.4 0.4 0.4 0.6 1.3 1.3 0.7 0.5 0.5 1.0 2.8 3.7 3.3 0.7 0.5 0.5 1.2 0.6 1.8 175 2.8174 2.7 0.9 0.4 0.4 0.8 0.4 0.8 1.1 2.1 47 2.3 1.6 0.9 0.6 1.4 1.7 1.2 0.5 0.5 1.0 1.2 0.9 0.6 0.5 0.5 0.9 1.2 1.0 0.5 0.5 1.1 2.0 2.4 1.3 0.9 0.8 0.5 0.4 0.3 0.6 1.1 3.5 3.1 1.1 0.5 0.4 0.5 0.5 0.5 0.8 0.8 0.6 0.5 0.5 1.2 3.6 4.5 199 198 3.2 0.7 0.5 0.6 1.8 2.8 0.7 1.7 1.6 1.1 0.7 0.5 0.5 0.5 1.0 2.1 2.2 1160 0.5 1.5 1.1 0.8 0.4 0.5 0.4 0.6 0.8 1.1 1.5 1.2 0.6 0.5 0.5 1.3 3.0 3.8 2.5 0.6 0.5 0.6 1.7 2.9 2.5 1.0 0.6 0.5 1.0 3.9 190 189 4.4 3.3 0.8 26 1.2 1.6 1.1 1.0 0.8 0.4 1.3 1.2 0.8 0.5 1.0 2.1 2.6 1.6 0.5 0.6 2.0 2.2 1.8 0.8 0.4 0.5 1.2 1.2 0.7 0.4 0.4 0.4 0.4 0.4 0.4 0.4 1.0 0.8 0.4 118 117 2.8 2.0 0.6 0.5 1.0 1.4 1.2 0.6 0.4 0.4 0.5 0.5 0.5 0.5 0.4 0.4 0.5 1.0 1.2 0.7 0.7 0.7 0.9 161 1 0.6 0.5 0.4 3.9 2.1 180 179 4.3 1.8 0.6 0.5 0.6 2.2 2.9 1.3 3.7 3.5 2.2 0.7 0.4 2.5 0.8 0.6 1.5 0.5 0.4 0.4 0.6 0.5 0.3 0.5 0.8 0.4 0.3 1.4 2.3 0.4 0.8 1.0 0.4 0.5 0.6 0.3 0.4 0.3 0.4 0.3 2.3 1.8 0.7 0.8 0.3 0.6 0.4 0.2 0.2 0.3 0.2 0.1 0.4 0.2 1.3 0.4 2.5 1.0 0.5 1.2 0.4 0.3 0.3 0.3 0.2 0.4 0.2 1.1 1.7 0.3 0.5 0.4 0.2 0.2 0.3 0.3 0.2 0.1 0.2 0.1 0.1 0.3 0.4 0.9 0.5 0.5 1.0 2.1 0.3 0.5 0.6 0.5 0.4 0.6 0.6 0.4 0.5 0.5 0.5 0.5 1.1 2.4 2.3 1.0 0.6 0.6 1.4 3.8 3.5 2.2 0.6 0.5 0.5 0.7 0.7 0.6 0.6 0.3 4.3 1.8 0.6 0.5 0.8 1.9 1.8 0.9 0.4 1.0 2.3 1.6 0.4 1.4 2.9 3.0 3.5 3.5 3.3 2.2 0.9 1.5 0.7 0.5 0.6 1.2 2.1 2.1 0.7 0.4 0.6 2.1 2.4 1.2 0.7 1.1 2.5 2.2 0.9 0.4 1.2 49 48 0.3 0.5 0.6 0.8 2.9 3.2 1.8 0.6 0.4 0.5 0.6 0.7 0.5 0.5 0.5 0.5 0.6 1.8 2.9 2.5 0.9 0.6 0.6 1.7 3.4 2.9 1.6 0.4 82 81 0.9 1.8 1.7 0.5 1.1 2.5 2.8 2.9 2.2 2.1 1.7 0.6 0.9 0.7 0.5 0.5 0.5 0.5 0.5 0.3 0.3 0.4 0.7 0.9 0.7 0.6 0.7 1.2 1.7 1.2 0.6 0.8 0.9 0.6 0.2 0.4 0.5 1.8 2.9 2.6 1.0 0.9 2.4 1.8 0.5 1.3 2.2 2.2 3.1 2.6 2.3 1.9 0.7 0.7 0.6 0.5 0.6 0.8 1.1 1.0 0.4 0.3 0.6 1.4 1.8 0.8 0.6 1.1 1.7 1.8 0.8 0.4 1.1 0.9 0.6 0.3 0.2 0.4 0.5 0.4 0.4 0.5 2.1 4.0 182 181 4.4 1.8 0.6 0.5 0.5 1.3 1.6 0.9 0.6 0.4 0.4 0.4 0.6 0.9 0.9 0.6 0.5 0.6 2.2 4.0 209 208 1154 1.0 0.8 0.3 0.3 0.8 1.5 1.5 0.6 0.5 0.5 1.4 3.7 3.3 2.2 1.1 2.5 1.5 0.4 1.4 4.1 4.2 3.8 3.5 3.3 2.4 1.3 2.4 101 1 124 123 2.0 1.1 0.5 0.5 1.4 135 134 1.8 1.8 0.8 0.9 2.0 144 143 1.8 1.4 0.5 1.5 1.6 1.0 0.4 0.4 1.6 2.9 3.0 1.3 0.5 0.5 0.7 2.0 2.4 1.4 0.5 0.4 0.4 0.4 0.5 0.8 0.7 0.6 0.5 0.5 1.6 3.3 4.0 2.2 0.6 0.6 0.7 2.1 2.5 1.5 0.6 0.5 0.4 0.5 0.5 1.2 1.8 1.4 1.4 0.4 14 13 0.8 0.4 4.2 1.6 0.6 0.5 0.7 1.5 1.4 0.8 0.4 0.4 0.4 0.6 1.3 1.8 1.2 0.6 1.9 1.4 0.4 1.2 2.3 2.6 2.8 2.9 3.0 2.1 0.9 2.2 1.3 0.7 0.5 0.5 1.0 1.6 1.3 0.6 0.4 0.5 1.2 1.9 1.8 1.2 2.4 148 147 3.0 2.4 0.8 2.4 0.8 1.0 1.2 0.8 0.2 0.4 0.9 1.3 2.3 4.2 0.4 0.7 0.9 0.8 0.5 0.4 0.6 2.0 2.9 2.8 0.9 0.5 0.6 1.5 2.9 2.9 1.4 0.5 0.3 0.3 0.5 0.7 0.7 0.5 1.6 0.7 0.6 0.9 2.2 2.8 126 125 2.3 0.7 0.4 0.7 1.9 0.4 1.0 0.5 1.1 2.0 1.9 2.8 2.9 2.6 2.3 1.2 57 56 0.2 0.3 1.2 2.1 2.0 2.8 2.7 2.1 88 87 2.5 1.5 103 2.3 2.4 1 1.5 0.7 0.6 0.7 2.1 2.4 1.8 0.8 0.4 0.6 2.3 139 2.5 2.8 138 2.3 1.3 1.8 1.9 1.8 0.5 0.2 176 1 0.3 0.3 0.5 1.9 2.5 2.1 0.6 0.4 0.5 2.4 4.4 201 200 0.3 0.5 0.2 0.3 0.4 0.4 0.4 0.6 2.0 3.4 3.4 1.1 0.5 0.5 1.5 3.5 3.0 1.9 0.5 0.5 0.5 0.6 0.5 0.5 0.5 0.5 0.5 0.7 2.3 3.0 2.9 1110 0.8 1.8 1.5 0.5 1.2 2.0 2.3 2.7 3.0 3.0 1.9 0.7 1.6 1.0 0.6 0.5 0.4 0.5 0.7 0.6 0.4 0.3 0.4 0.7 1.0 1.0 0.8 1.6 2.2 1.9 0.9 0.5 0.4 0.2 0.4 0.8 1.3 1.1 0.5 0.5 0.6 1.5 4.3 192 191 3.4 1.8 0.5 0.4 0.7 1.9 2.0 1.1 0.5 0.5 0.5 0.5 0.8 1.3 1.1 0.5 0.5 0.7 2.8 4.8 214 213 4.0 0.9 0.6 1.6 0.1 0.3 1.3 2.5 2.8 3.1 3.0 3.1 3.2 1.6 2.0 1111 0.7 0.5 0.8 1.6 1.8 1.3 0.5 0.4 0.6 1.3 1.6 1.1 0.4 0.2 0.5 0.6 0.8 0.9 1.2 1.9 0.2 0.2 0.3 0.4 0.4 0.5 0.5 1.0 1.6 1.2 0.5 0.5 0.6 2.7 4.8 207 206 3.8 1.4 0.4 0.3 0.4 0.7 1.5 0.1 0.2 1.3 1.9 2.3 2.3 3.0 3.0 2.8 1.9 1.3 1107 0.4 0.2 0.2 0.3 0.2 0.2 0.1 3.3 2.1 1.0 0.9 0.5 0.3 0.1 0.4 0.7 1.2 0.4 0.2 0.3 0.3 0.5 1.5 2.1 1.5 0.5 0.4 0.5 1.3 1.6 0.1 0.2 0.2 0.4 0.6 0.5 0.4 0.4 0.8 0.3 0.7 1.1 1.5 1.9 63 62 1.9 2.8 2.4 94 93 2.3 2.1 1.0 0.9 0.1 0.1 0.1 0.1 1167 3.3 1.5 1.0 0.3 0.1 0.5 0.9 1.0 1197 1 212 1.6 0.9 1.0 1 31 0.1 0.3 1.2 2.2 2.8 3.1 3.2 3.1 3.3 1.9 1.6 0.6 0.4 0.5 0.8 0.3 0.2 0.3 0.5 0.6 0.8 1.2 0.9 0.8 0.8 0.8 0.5 0.1 0.2 0.4 0.5 1.3 0.5 0.5 0.4 0.4 0.4 0.7 2.4 3.1 3.5 0.8 0.4 0.4 0.7 1.0 1.0 0.8 1.0 0.7 1.0 2.2 2.4 2.8 3.2 3.5 2.7 0.8 0.6 0.0 0.0 0.0 0.3 0.1 0.5 0.8 1.3 1.4 0.1 0.1 0.2 0.2 0.3 0.4 0.6 0.5 1.9 1.7 0.6 0.6 1.5 1.6 1.8 3.4 3.5 2.9 0.9 0.0 0.0 0.1 0.1 0.0 0.5 0.9 0.7 0.3 0.1 0.1 0.2 0.2 0.3 2.1 1.5 2.4 2.1 1.8 0.8 1.3 1.4 1.1 2.4 0.8 1.9 22 21 1.9 1.9 1.3 2.0 2.2 1.1 1.5 1.4 0.2 0.0 0.1 0.0 0.0 0.0 99 98 0.2 0.1 0.0 0.0 0.4 0.2 0.1 0.0 0.1 0.1 0.1 0.0 0.0 1.4 2.0 2.6 2.2 0.7 1.9 1.7 1.7 1.2 0.3 0.0 0.0 0.0 0.0 1.0 1.0 14 1.6 2.2 65 64 0.7 0.9 0.8 0.6 0.0 0.0 1.3 1.5 1.0 1.2 0.8 0.4 0.3 0.3 1.0 1.0 1 35 1.2 1.7 2.0 1.3 0.9 0.2 0.6 0.7 0.5 1.7 1.3 0.7 0.7 0.7 0.4 1 66 1.0 0.4 1.1 0.7 0.4 1.1 0.9 0.2 1 2 0.8 0.6 0.4 1.0 0.6 1.0 0.7 0.4 0.2 0.2 0.5 0.8 0.3 1.4 1.2 0.9 0.6 0.6 1.0 1.2 1.2 1.9 1.6 1.2 0.9 0.9 1.3 151 1.7 1.9 11 3.1 1.9 2.0 1.7 1.7 1.5 2.8 3.2 1 25 2.7 3.0 2.1 2.5 150 3.1 74 73 2.3 1.5 0.4 0.5 0.6 0.6 0.6 0.9 1.8 3.4 4.5 3.9 1.8 2.3 2.0 1.5 7 6 3.1 4.3 3.123 24 4.0 3.7 2.645 46 4.8 4.8 70 69 3.9 2.1 0.6 2.0 0.5 0.7 1.7 2.8 2.8 1.4 0.3 0.9 2.8 194 193 2.7 1.8 1.0 1.2 1.3 1.3 1.2 1.1 1.2 2.8 3.5 72 71 3.4 1.9 0.6 2.4 3.5 2.2 2.4 3.2 4.1 3.4 3.9 3.5 2.7 4.5 5.7 4.8 2.2 1.4 2.0 2.8 3.1 3.0 3.1 3.0 3.0 4.5 5.3 4.3 2.1 0.5 1.8 1.4 1.0 1.7 1.7 0.9 0.3 1.1 3.3 3.3 1.4 0.5 0.7 0.7 0.5 0.4 1.4 3.0 3.0 1.2 0.2 0.2 0.2 0.2 0.7 1.8 2.4 1.9 0.9 0.2 0.1 0.4 1.1 3.1 3.1 1.9 0.7 2.1 0.7 0.7 0.4 0.2 0.2 0.7 2.0 1.4 0.8 0.5 0.2 0.1 0.4 1.2 3.4 188 2.8 2.9187 3.3 1.3 1 381.4 0.8 0.4 0.2 0.2 0.2 0.6 1.7 2.8 3.1 1.1 0.4 1.1 0.7 0.5 0.3 0.3 0.2 0.4 1.0 2.0 2.1 1.5 0.7 1.5 1.1 0.7 0.5 0.4 0.3 0.4 0.5 0.3 0.8 2.0 3.5 2.5 1.2 0.5 1 1.3 1.1 1.0 0.6 0.6 0.4 0.3 0.5 1.2 2.0 1.8 1.5 0.6 0.5 1.3 3.4 3.1 2.5 1.0 0.4 18 0.9 0.9 0.6 0.4 0.4 0.6 1.0 1.3 0.8 0.2 0.6 1.7 2.9 184 183 3.2 2.3 0.8 0.6 0.8 0.5 0.4 0.3 0.3 0.7 1.4 2.4 80 79 2.6 1.5 0.7 0.3 0.5 1.0 1.8 2.5 2.9 1.2 0.5 0.3 0.4 0.4 0.3 0.4 0.3 0.6 1.2 1.7 1.8 0.9 0.5 0.5 0.7 0.8 0.5 1.0 2.1 2.5 1.9 1.3 0.6 0.2 2.9 2.2 0.9 0.4 0.2 0.3 0.4 0.6 0.9 0.8 0.5 0.7 0.9 0.8 0.5 0.5 0.9 1.7 1.6 1.1 0.2 0.3 0.7 1.4 1.7 1.6 0.8 0.4 0.4 0.4 0.4 0.7 1.5 2.3 2.3 1.5 0.7 0.3 0.3 0.6 1.1 2.7 3.3 178 177 0.5 1.1 2.3 3.2 3.5 1.9 0.8 0.3 114 113 0.0 0.0 1.7 0.7 0.3 0.3 0.3 0.4 0.5 1.0 1.4 1.2 0.7 0.8 0.5 0.2 0.1 0.0 0.0 0.2 0.5 1.1 2.1 0.3 0.6 1.2 1.7 0.6 0.6 0.8 1.2 1.2 0.8 0.4 0.3 0.5 0.7 0.6 0.4 0.5 0.7 0.6 0.4 119 1 0.9 0.5 0.2 0.3 0.6 1.2 0.4 3.1 2.1 0.0 3.2 2.4 2.9 1.9 0.7 1.0 0.6 0.4 0.5 0.5 0.4 0.4 0.5 1.0 1.9 1.2 0.7 0.5 0.5 0.5 0.8 0.6 0.4 0.9 1.7 3.3 5.0 5.0 3.2168 169 3.8 4.0 2.8 1.7 1.3 0.6 0.7 1.2 2.1 3.1 2.0 1.8 1.6 0.9 0.4 2.7 36 2.2 37 1.7 1.0 0.4 0.3 0.3 0.3 0.7 1.6 2.0 2.0 1.3 0.6 0.5 0.3 0.1 0.5 0.8 1.3 1.7 2.3 3.4 1.9 0.9 0.4 173 172 0.7 0.5 0.3 0.2 0.2 0.3 0.4 0.9 2.1 2.5 1.7 0.7 0.6 0.6 0.4 0.5 0.4 0.2 1.1 2.7 3.2 163 162 3.3 5.3 4.9 3.7 3.6 3.5 3.9 2.6 1.0 5 1 0.8 0.5 0.3 0.2 0.2 0.3 0.8 2.3 1.9 78 77 1.8 0.8 0.6 0.9 0.1 0.2 0.2 2.9 3.7 3.2 3.3 3.9 5.1 5.1 3.3 2.8 1.5 0.6 0.0 0.9 0.6 0.3 0.3 0.2 0.4 0.9 1.7 1.8 0.8 0.6 0.7 108 1 166 165 0.0 1.8 2.0 2.4 3.4 3.7 5.0 4.5 2.5 1.2 0.6 0.5 0.5 0.4 0.5 0.4 0.3 0.4 0.8 0.6 0.3 0.3 1.5 3.1 3.7 3.3 2.9 1.8 0.9 0.5 0.3 0.5 0.9 1.2 1.0 0.5 0.3 0.3 0.2 0.1 0.8 2.0 2.6 1.5 1.0 0.6 0.3 0.8 1.8 2.1 1.7 0.9 0.3 0.2 0.1 0.4 0.8 0.7 0.5 0.4 1.1 2.0 3.1 28 27 1.9 0.9 0.4 0.2 0.3 0.4 1.0 1.7 1.8 1.3 0.6 0.2 0.3 0.7 1.0 1.0 0.9 0.6 1.4 1.4 1.1 0.4 0.2 2.4 2.4 1.4 0.2 110 Results indicated are based upon data provided to Cireon. The intensity, distribution, and uniformity shown are based upon the dimensional and reflectance parameters indicated. Field results will be based upon the actual parameters of the space and the objects within. It is the customers responsibility to assess the accuracy of the assumed parameters and their affect upon field results. 1.1 1.0 0.6 0.4 0.4 0.8 0.9 2.1 1.2 0.6 0.6 0.5