"C"
Dim.
Aprx.
Wt. (lb)
Full Load
Efficiency
Voltage
1800
143T
ECP3581T-5
1800
145T
ECP3584T-5
1800
145T
ECP3587T-5
1800
182T
ECP3661T-5
3
1200
213T
ECP3764T-5
1800
184T
ECP3665T-5
5
1200
215T Alternatives
ECP3768T-5
Functionally
Equivalent
$798
812
848
1,073
1,508
1,093
1,528
L1
L1
L1
L1
L1
L1
L1
12.88
12.88
12.88
15.93
19.32
15.93
19.32
60
65
68
103
186
121
205
86.5
86.5
86.5
89.5
89.5
90.2
89.5
575
575
575
575
575
575
575
1
1 1/2
2
Full Load
Notes (a)
Amps
1.1
1.6
2.2
3.2
4
5.2
6.4
1
1
1
1
1
1
1
Reliance
M/N
P14G7545
P14G7548
P14G7550
P18G3373
P21G3353
P18G3374
P21G3354
Catalog Numbers shown with an indented Reliance M/N immediately below identify functionally equivalent products. Both numbers
will be stocked. While these motors have the same mounting dimensions and similar performance, there may be some slight differences
such as “C” dimension, weight, amps, etc. If one motor is not available, consider the functionally equivalent as an alternative.
Hp
RPM
NEMA
Frame
56C
56C
1/4
56C
1200
56C
3600
56C
56C
1/3
1800
56C
501 Catalog Notes 56C
1800
Catalog
Number
CNM3454/35
➥P56X3166
P56H3615
CNM3531
CNM3457
➥P56X1523
CM3534
➥P56H3119
List
Price
Mult.
Sym.
“C”
Dim.
Aprx.
Wt. (lb)
Full Load
Efficiency
Voltage
Full Load
Amps
$404
404
404
513
296
424
293
293
K
K
K
K
K
K
LS
LS
10.44
11.07
10.25
11.07
11.07
11.07
11.35
10.25
28
28
21
31
31
31
22
24
68
80
68
68
80
80
68
70
208-230/460
230/460
208-230/460-480
230/460
230/460
230/460
230/460
208-230/460
0.4
0.4
0.55
0.7
0.6
0.6
0.8
0.7
Notes (a)
15
15
30
30
30
15
• Most steel band and cast iron foot-mounted motors have dual mounting holes (143T-145T, 182T-184T, etc.).
Cast iron Athens-built 447 and 449 frame motors in M, ECP and ECP841 product families have single foot mounting holes.
• All cast iron motors are built with symmetrical frames which may be converted from F1 to F2 by switching endplates and rotor
from end-to-end except for L182T, L184T, L213T, L215T and L449T. Frames with the “L” prefix have standard NEMA base
and BA dimensions. Also applies to TC versions of these frame sizes.
• ECP, ECP841 and ECP641 motors are now painted with the Reliance blue-green color epoxy paint instead of the grey epoxy.
Authorized Service Centers and Service Policy — Refer to Baldor's website (www.baldor.com) for a complete listing of service
centers and our service/repair policy
Dimensions — Refer to Baldor's website: (www.baldor.com) for dimensions for all stock AC and DC motor ratings.
Efficiencies — All efficiencies listed are nominal efficiencies at full load.
General
Information
Single Phase
Motors
Mult.
Sym.
General Purpose
Industrial Motors
NEMA
Frame
Premium Efficient
Super-E® Motors
List
Price
RPM
Severe Duty
Motors
Catalog
Number
Hp
Washdown Duty
Motors
Understanding 501 Catalog Numbers
Conversions to Single Design
Motors shown with a Catalog Number and a Reliance M/N on the same line indicate that these motors have been converted to one
design. The Reliance M/N is provided as a reference to help determine the current catalog number to order by. Products that follow this
format will include CP, ECP, CECP, VECP and other servere duty / chemical processing, washdown duty and single phase stock motors.
Explosion Proof
Motors
General Information
Renewal Parts and Installation – Maintenance Data — A parts list for each motor is shown online at www.baldor.com. Data
Section 506 contains a wide variety of the most commonly required service parts. AC (MN400) and DC (MN605) motor installation
and maintenance data are also available.
SCR Drive Motors — Field Amps listed are for High Voltage Connections with motor at operating temperature.
Service Factor — NEMA T-frames in TEFC construction have a service factor of 1.15 or greater except where noted. All NEMA
U- frame TEFC motors (except explosion-proof) have NEMA open service factors. Fractional horsepower TEFC motors have NEMA
open service factors. All DC motors have 1.0 service factors.
Freight Policy — Shipments of stock products shown in this catalog are made with the selling terms of F.O.B. factory or warehouse.
International Shipments - Ex Works, Non-stock items - FOB Factory. Baldor will prepay and absorb freight charges, on a carrier
chosen by Baldor, to the first destination in the continental United States on shipments of 1500 pounds (1000 pounds on portable
generators) or more.
Contact your local Baldor•Reliance District office for clarification, assistance or additional information on any Baldor•Reliance
product. A listing of the offices is on page 575.
Commercial
Motors
Performance and connection diagrams — Baldor's website (www.baldor.com) lists performance test data and connection
diagrams for all stock AC and DC motor ratings.
HVAC Motors
Modified Motors — Details of Baldor’s Mod Express Program are listed in this catalog. Using stock motors, Baldor can modify
motors to fit a variety of applications in only 2 to 5 working days for most modifications.
Pump Motors
Full Load Amps – FLA — For low voltage amps, double high voltage amps shown.
­
General
Information
General Information
Abbreviations: The Basic Baldor catalog number consists of a letter(s) prefix and several non-significant proceeding numbers. A suffix letter(s) and/or
number(s) may also be part of the catalog number. For example L3510 or L3510T. Following is a list of prefix and suffix definitions.
Catalog Number Prefix:
Single Phase
Motors
General Purpose
Industrial Motors
Premium Efficient
Super-E® Motors
Severe Duty
Motors
Washdown Duty
Motors
Explosion Proof
Motors
Pump Motors
Commercial
Motors
HVAC Motors
­
AEM
AF
AM
ANF
AO
AP AS
B
BC
BK
BLW
BMC
BSM
BTG
BU
C
CBL
CD
CDP
CDPT
CDPWD
CDPSWD
CDPX
CDX
CESWDM
CF
CHC
CP
CR
CSC
CSM
CSSEWDM
CSSWDM
CSWDM
CWAM
CWDSM
D
DE
DG
DMG
DOC
DR
E
E3H
ECP
EN
FM
FCD
FD
FFC
FL
G
GC
GCP
GD
GF
GP
GPP
Automotive Motor (GM7EHQ)
Aeration Fan Motor
Automotive (Motor GM7EQ)
Auger Flange Motor
Air-Over Motor
Subfractional HP, PM Motor
Arbor Saw Motor
Brake Motor
DC Motor Speed Control
Single Phase Gearmotor Kit
Blower Kit
Brushless DC Motor Control
Brushless Servo Motors
Tachometer Generator
Bushing Kit
NEMA C-Face with Base
Cable Assembly
Wound Field DC Motor
NEMA C-Face with Base
PM SCR Drive Motor
PM SCR Drive Motor
with Integral Tachometer
Washdown PM SCR Drive Motor, NEMA C-Face
PM Paint Free Washdown SCR Drive Motor
C-Face with base
PM Explosion Proof SCR Drive Motor C-Face with base
Wound Field Explosion Proof DC Motor, NEMA C-Face
Paint Free Super-E Washdown - C-Face with base
Condenser Fan Motor
Direct Drive Fan Motor with Resilient Base
Chemical Processing, Corrosion Protected Motor
Crusher Motor
Checkout Stand Motor
Baldor SmartMotor
All Stainless Super-E Washdown-C-Face with base
All Stainless Washdown - C-Face with base
Paint Free Washdown - C-Face with base
Dirty Duty Washdown - C-Face with base
Baldor Washdown SmartMotor
DC Shunt or Compound Motor
or Definite Purpose Soft Start Control
Vacuum Pump Motor
Gate Operator Motor
Lifting Magnet Generator
Door Operator Motor
Double Reduction
Super-E Premium Efficiency
Super-E Premium Efficiency
HVAC Duty with Connection Box located on top of Motor
Super-E Premium Efficiency, Chemical Processing
Hostile Environment Motor
Encoder Kit
F-2 Mount Motor
Drip Cover Kit
Farm Duty Motor
Fan Cover/Conduit Box Kit
Flange Kit
Subfractional HP Gear Motor
Permanent Split Capacitor and Split Phase
Permanent Split Capacitor and Split Phase Parallel Shaft Gearmotor
Centrifugal Fan Motor
900 Series Reducers
Subfractional HP PM Motor
PM Parallel Shaft Gear Motor
GSF
GS
H
H3
HP
ID
IDM
IDNM
IDWNM
IDXM
IM
IR
J
JM
JP
JSL
K
KN
L
LRA
M
M
MM
MPM
MVM
N
OF
P
P15
PSC
R
RBT
RES
RG
RH
RL&RM
RT
S
SD
SS
SWD
T
TA
TM
TK
UC
V
VH
VJM
VLCP
VP
VPCP
WC
WD
WW
ZD
ZDM
ZDNM
ZDWNM
Universal Series Right Angle Gear Reducers
Grain Stirring Motor
Definite Purpose HVAC Motors
HVAC Duty with Connection Box located on top of Motor
Hydraulic Pump Motor
Inverter Control
Inverter Drive Motor-TEBC
Inverter Drive Motor-TENV
Washdown Inverter Motors-TENV
Explosion proof Inverter Drive Motors-TEFC
Irrigation Drive Motor
Instant Reversing Single Phase Farm Motor
NEMA 56J Stainless Steel Threaded Shaft with Dripcover
NEMA JM Pump shaft & Face with Base
NEMA JP Pump shaft & Face with Base
Square Flange Pump Motors with threaded shaft.
Model 34 Diameter Motor
with 56 C-Face, less Base
Model 34 Diameter TENV Motor with 56 C-Face, less Base
Single Phase
Line Reactor
Three Phase
Multipurpose Soft Start Control
Metric Dimension Motor with Base
Three Phase Metering Pump
Metric Dimension Motor, Flange Mount less Base
Totally Enclosed Non ventilated
Design D, High Slip Motor (Oil Field)
Pressure Washer Motor
Pre-Engineered Control Panel
Permanent Split Capacitor
Repulsion-Start, Induction-Run Motor
Roller Bearing Conversion Kit
Resolver Feedback Kit
Regeneration Resistor Assembly
Definite Purpose HVAC Motors
Resilient Base(Cradle Mount)
Dynamic Braking Resistor Assembly
Single Phase Soft Start
Series 23H Servo Control
All Stainless Washdown Duty
Stainless Washdown Duty
Torque Control
Torque Arm
Definite Purpose HVAC Motors
with Terminal Panel Endplate
Tachometer Mounting Kit
Universal Crop Dryer Motor
NEMA C-Face less Base
Vertical Pump Motor, Normal Thrust
NEMA JM Pump Shaft and
Face less Base
Vertical Pump Motor, Medium Thrust
PM SCR Drive Motor with
Metric Face or Flange
Vertical Pump Motor, High Thrust
West Coast Fit NEMA TCZ
Washdown Duty
Woodworking Motor
Vector Control
Vector Drive Motor-TEBC
Vector Drive Motor-TENV
Washdown Vector Motors-TENV
Catalog Number Suffix:
-2
120/240V Field
-277
277 Volt Winding
-4
460 Volt Winding
-5
575 Volt Winding
-8
200 Volt Winding
-9
NEMA Design C High Torque Winding
-12
12 Leads
/35
Full 140 Frame Band Diameter
/36
Full 180 Frame Band Diameter
-50
Wound for 50 Hertz Service
-2341
2300/4160 Volt Winding
A
Automatic Thermal Overload
BV
Blower Vented
-C
Listing includes Class I, Group C
-CL
Open Chassis Enclosure, Line Regenerative
-CO
Open Chassis Enclosure, no internal braking
E
Electric Switch
-E
NEMA 1 Enclosure, built in Dynamic Braking
-EL
NEMA 1 Enclosure, Line Regenerative
-EO
NEMA 1 Enclosure, no internal braking
-ER
NEMA 1 Enclosure, built in Dynamic Braking Transistor
-I
Explosion-Proof, 1.15 Service Factor
M
Manual Thermal Overload
-MO
Protected Chassis Enclosure,
no internal braking
P
Wound Field DC Motor NEMA “AT” Frame
-P
Partial AC Motor Excludes
R-
Roller Bearing
T
NEMA "T" Frame Dimension
TP
Feather Picker Motor
TR
NEMA “T” Frame-Roller Bearing
TS
NEMA "TS" Frame Short Shaft
Pulley Endplate
-V12
12 Volt DC
-V24
24 Volt DC
-W
NEMA 4 Enclosure
-WR
Washdown Rating
Gear Reducer Suffix: 900 Series
A
56C Motor Flange
B
140TC Motor Flange
C
180TC Motor Flange
G
Left Hand Output Shaft
H
Double End Output Shaft
J
Right Hand Output Shaft
Gear Reducer Suffix: Universal Series
A
56C or Right Hand Output Shaft
B
140TC
C
180TC
Grinder Catalog Number Suffix:
D
Deluxe
E
Exhaust Guards
W
Wide Design
Other Abbreviations:
C
Permanent Split Capacitor
L
Capacitor-Start, Induction-Run Motor
LC
Capacitor-Start, Capacitor-Run Motor
S
Split Phase
X
Explosion-Proof
Approvals UL and CSA
General
Information
General Information
UL Recognition for NEMA frames
E46145
180-449
—
UL Recognition for NEMA frames
E54825
42-184
Subfractional motor and gearmotors
UL Recognition for DC frames
E46145
48-4013AT
—
UL Recognition for DC frames
E54825
L180-DL2814
—
UL Recognition for AC frames
E54825
440 & 5800
—
UL Recognition for AC frames
E54825
42-449
—
CSA Certification for NEMA frames
LR2262
180-449
600 max.
CSA Certification for NEMA frames
LR7861
42-184
Fractional and Integral
CSA Certification for DC frames
LR2262
42-184
Integral Wound Field Build in Ft. Mill
CSA Certification for DC frames
LR36841-5
48-4013AT
5-500
CSA Certification for DC frames
LR40567
L180-DL2814
32-1000
CSA Certification for AC frames
LR40567
7MG-80MG
15-150
CSA Certification for MG Sets
LR40567
C4412-B1610
527-3000
CSA Certification for DC frames
LR52580
447T-7111
500-1500
CSA Certification for AC frames
LR52580
5000-5800
900(2P),800(4P),700(6P)4160Vmax
CSA Certification for AC frames
LR36841-7
5800-1000
1000-15000
CSA Certification for AC frames
LR6451
447T-7111
500-1500
CSA Certification for Finned AC frames
LR52580
5800-1000
1000-15000
CSA Certification for O5800 AC frames
LR6451
General Purpose
Industrial Motors
—
LR40567
Baldor Product Designs
Reliance Product Designs
EPAct Compliance Certification: CC 010A and CC 049A
Premium Efficient
Super-E® Motors
42-449
Severe Duty
Motors
Comments
Washdown Duty
Motors
Hp
Explosion Proof
Motors
Frame
Single Phase
Motors
Approvals for AC Motors, Explosion Proof, and DC Motors:
AC Inverter and Vector Controls — Baldor and Baldor V*S Drives are UL/cUL Listed, file number E128059. Reliance Drives are
UL/cUL Listed, file number E59092.
Commercial
Motors
DC SCR Controls and Accessories — Controls with catalog numbers BC138, BC139, BC140, BC140-FBR, BC141, BC142,
BC155, BC154, BCWD140, BC160, BC200, BC201, BC202, BC203 and BC204 and accessories BC24-LF, BC145, BC146,
BC147, BC151, BC211 and BC212 are UL listed for US and Canada, UL file number E114039. BC153 is UL component recognized
for US and Canada. BC254, BC354, BC214, BC215, BC216, BC217, BC218, BC245, BC253, BC258, BC259, DSP4-120, DSP4240, DTM8000-120, DTM8000-240, HPU10, RK60-56 and RK60-145 are pending – contact Baldor for status. Larger SCR controls
Series 19H and 20H are UL and cUL Listed, UL file number E128059. SCR controls Series 29D and 30D are UL and cUL listed, UL
file E128059. Reliance DC are Drives UL/cUL Listed, file number E59092.
Pump Motors
DC Tachometers — XPY tachometers are UL recognized, file number E109527 and CSA listed file number LR36841-5.
HVAC Motors
AC Soft Starters — All units are CUL listed, file number E114039 except catalog item S25CA.
­