RECEPTACLES: one extended barrel 22.3.7 tamper resistant 15A 120V outlets
MOUNTING: 22.2.5
INSTALLATION: drilled and mounted behind rigid material
MATERIALS: polycarbonate casing,
electrical components.
CONFIGURATION: single outlet
36
(1.4”)
36(1.4”)
DESCRIPTION
The 22.6.5L
is an assembly
one extended
barrel 22.3.7
22 is a complete
suite ofofinterior
wall accessories
that tamper
challenge
resistant
15A outlet
for an
installation
in materials
other than
drywall
the traditional,
tired and
ubiquitous
cover
plate concept.
The 22
is
using
the to
22.2.5
outlet
plate. The
22.2cover
system
is aor
designed
“mud”single
directly
intomounting
drywall without
a visible
plate
departure
from conventional
cover
plate
requires
precise
trim. Alternatively,
it may be set
flush
intosystems
millwork,and
marble,
glass
or any
and
craftsmanship
during components
installation. Switches
and power
otherskilled
wall surface.
22 operative
include: power
outlets,
receptacles
can receptacles,
now be flushcable
with the
wall surface
are visually
data/telephone
connectors,
line and
voltage
on/off
more
subtle
before.
Using controls.
the 22.1 removal tool, the outlets
switches,
andthan
low ever
voltage
intelligent
can be removed to access the wiring after installation.
The 22 is a complete suite of interior wall accessories that challenge
the traditional, tired and ubiquitous cover plate concept. The 22 is
designed to “mud” directly into drywall without a visible cover plate or
trim. Alternatively, it may be set flush into millwork, marble, glass or any
other wall surface. 22 operative components include: power outlets,
data/telephone receptacles, cable connectors, line voltage on/off
switches, and low voltage intelligent controls.
83
83
(3.3”)
131
131
(5”)
(5”)
NOTES
+ All tamper resistant components are sold as assemblies.
94
(3.7”)
94 (3.7”)
Worldwide utility patents pending.
US patent # 7,956,295 B2
17.5
17.5
(0.7”)
(0.7”)
RECEPTACLE
E466123
22.5.5L
Design by Omer Arbel
PRODUCT SPECIFICATION
For additional information, please contact:
info@bocci.ca
www.bocci.ca
europe@bocci.ca
www.bocci.ca
© 2014, Bocci Design and Manufacturing Inc. Any inquiries should be directed to the following email address: info@bocci.ca.
1
Recess and install
install the
the junction
junction box
box35
9 mm
mm (0.35”)
(1.35”) away
away from finished
wall surface.
2
Put the wiring through the junction box. Insert the operative
components (22.3.1, 22.3.2, 22.3.3, 22.3.4, 22.3.5, 22.3.6) into the
cover plate (22.2.5) then make all necessary electrical connections.
3
Connect the wires according to the wiring diagram below
using appropriately sized marettes.
Mount the cover plate (22.2.5) to the junction box using screws
provided.
Note:
22 receptacles use 14 Ga (2.08 mm) wire.
Neutral (White)
Neutre (Blanc)
35 mm
fullyassembled
assembled view
fully
view
35 mm
Line 125V, 60Hz
Ground (Green)
Line 125V, 60Hz
Terre (Vert)
TR
Line Hot (Black)
Ligne Actif (Noir)
6
For wall materials thicker than 31mm (1.23”), the wall material needs to
be modified to recess the plate at 31mm (1.23”) depth.
34.5mm (1.35”)
5
117mm (4.6”)
Use the cutting template provided to measure the drill
hole locations in your finish material. If you wish to install
only one operative component simply drill one 36.5 mm
(1.4”) diameter hole.
36.5mm (1.4”)
4
Install finish material. remove trim cap (22.4).
TR
36.5 (1.4”)
For plaster, mortar, tile, concrete, etc. use the trim cap (22.4) to block
the face of the operative components to create the necessary reveal.
Purchase additional components at
www.bocci.ca/22
US patent #7,956,295 & 8,232,482
22.5.5L
Design by Omer Arbel
INSTALLATION INSTRUCTIONS
RECEPTACLE
E466123
© 2014. Bocci Design and Manufacturing Inc.
Any inquiries should be directed to the following email address: info@bocci.ca.