Replacement Parts for
DitchWitch
®
Trenchers
Chains
Cutting Teeth
Sprockets
Bearings
Carbide Teeth
Anoka, Minnesota
Atlanta, Georgia
Ontario, California
Centralized Customer Service: 800/328-2424
w w w . b a l l a n t i n e i n c . c o m
Faster Service
Better Quality
Lower Prices
Replacement Parts for
®
DitchWitch
Effective 10/08
Replacement Parts for Ditch Witch® Trenchers
Ditch Witch® is a registered trademark of The Charles Machine Works, Perry, OK.
Ordering Instructions
All credit accounts must be approved by our Anoka, Minnesota office.
Please order by part number and give the make and model of your machine.
The enclosed parts and price list supersedes all others.
(Prices are subject to change without notice.)
You may order from the office which is most convenient for you.
Main Office
840 McKinley Street
Anoka, Minnesota 55303
Branch Office
675 Wesleyan Drive Southwest
Atlanta, Georgia 30336
Toll Free Customer Service
Toll Free 800-328-2424
FAX 763-427-2277
Branch Office
801 S. Dupont, Suite G
Ontario, California 91761
Trencher Chain, Base Plates and Cutters for the
Ditch Witch HT220 Track Machine Are Also Available From Ballantine, Inc.
®
Ballantine Provides Digging Systems Designed for Large Track Trenchers
in All Ground Conditions Throughout the World.
Take Advantage of Ballantine’s Superior Quality Products and
Our 50 Years of Expertise in the Trenching Industry.
Index
Index
Page 1
Trencher Chain Identification Sheet
Page 2
Chain Assembly Guide
Page 3
Chain Assembly Configurations
Page 4
Smart Part Numbering System
Page 5
Chains for Walk Along Models
Page 6
Model(s): M, M422 Series. Drive Parts
Page 7
Model(s): M Series, 1410, 1420, 1500, 1810, 1620, 350SX, 400SX, 2020. Boom, Auger & Drive Parts
Page 8-9
Model(s): C-7, C-9, C77, C99, 350SX. Boom & Drive Parts
Page 10
Model(s): M Series, C Series, J-20, 1410, 1420, 1500, 1810. Teeth & Accessories
Page 11-12
Model(s): M Series, C Series, 350SX, 400SX, 1010, 1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420,
1620, 1810, 1820, 2020, 2200. Chain,Teeth & Accessories
Page 13
Model(s): 1010, 1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820, 2020.
Roller Booms, Sprockets, Rollers & Bearings
Page 14
Model(s): 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820, 2020.
Roller Booms, Sprockets & Roller
Page 15
Model(s): J20, 2200, 2300, 2310, 3610, RT36 & Attachments H311, H312. Boom Parts
Page 16-17
Model(s): 2200, RT36. Boom, Sprockets, Bearings & Belts
Page 18
Chains for Mid-Size Riding Trenchers
Page 19
Model(s): 2200, 2300, 2310, 3610, RT36 & Attachments H311, H312.
Sprocket Style Booms, Sprockets & Bearings
Page 20
Model(s): 2300, 2310, 3500, 3610, 3700, 4500 & Attachments H300 Series, H313 & H314.
Roller Booms, Sprockets & Roller
Page 21
Model(s): 2300, 2310, 3500, 3610, 3700, 4500 & Attachments H300 Series, H314, H514, H515,
H552. Roller Booms, Sprockets & Roller
Page 22
Model(s): J20, 2200, 2300, 2310, 3500, 3610, 3700, RT36 & Attachments H300 Series, H500 Series.
Teeth & Accessories
Page 23-24
Model(s):V30, R30, 3210. Booms, Sprockets, Bearings & Belts
Page 25-26
Model(s):V30, R30, 3210, 3500, 3610, 3700, 4500. Chain,Teeth & Accessories
Page 27-29
Model(s): 3610, RT36, R40, 4010 & Attachments H300 Series, H500 Series,
A/H 400, A/H 500 using 2" Pitch Chain. Boom Sprockets, Bearings, Auger Shafts & Accessories
Page 30-31
Model(s): R40, 3210, 3500, 3700, 4010, 4500, RT36, RT40. Teeth & Accessories
Page 32-33
Model(s): J20, 2200, 2300, 2310, 3500, 3700,V30, R30, R40, 3210, 3610, 4010, 4500.
Chain & Accessories
Continued on Page ii…
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page i
Index
Page 34
Chains for Large Riding Trenchers
Page 35-36
Model(s): R30, R40, 3210, 4010 & Attachments
H300, A/H400, A/H500. Boom Sprockets, Bearings, Augers & Accessories
Page 37
Model(s): A/H500, A615, 510A. Sprockets, Rollers, Bearings, Augers & Accessories for
Alligator Boom
Page 38-39
Model(s): R40, 4010, R60, R65, 5010, RT55, 5110, 6510, 7510, RT75, 7610, 8020, RT95, RT115,
& Attachments A/H400, A/H500, H700. Chain,Teeth & Accessories
Page 40
Model(s): R60, R65, 5010, 5110, RT55, 6510, 7510, RT75, 7610, 8020, RT95, RT115, A/H400,
A/H500, H700. Anti-Back Flex Chain
Page 41
Model(s): R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020, & Attachments A/H400, A/H500,
H700. Boom Parts, Sprockets, Bearings & Accessories
Page 42
Model(s): R40, R60, R65, 4010, 5010, 6510, 7510, 8020, & Attachments A/H400, A/H500, H700.
Auger Parts & Accessories
Page 43-44
Model(s): R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020 & Attachments A/H400, A/H500,
H700. Drive Sprocket Head Shaft & Components
Page 45-46
Chain & Accessories for Ultra Heavy-Duty Trench-ALL® 3110
Page 47
Model(s): R100 & AR12, RT115. Chain
Page 48
Model(s): R100, AR12. Chain,Teeth & Adapters
Page 49
Model(s): R100, AR12. Boom Sprocket, Auger Sprockets, Drive Sprockets & Accessories
Page 50-52
Chain & Accessories for Ultra Heavy-Duty Trench-ALL® 4086
Page 53
Rock & Frost Section
Page 54
Chain,Teeth & Adapters for Terminator®, Alligator, Rock & Frost Walk Along Trenchers
Page 55-56
Model(s):V30, R30, 2300, 2200, 2310, R40, J20, 3500, 3610, 3700, R40, 4500, 4010.
Terminator®, Alligator, and Rock & Frost Chain,Teeth & Adapters
Page 57-58
Model(s):V30, R30, 2300, 2310, R40, 4010, 5010, 3500, 2200, 3610, 3700, 4500.
Terminator®, Alligator and Rock & Frost Anti-Back Flex Chain,Teeth & Adapters
Page 59-60
Model(s): R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020.
Terminator®, Alligator and Rock & Frost Chain,Teeth & Adapters
Page 61
Model(s): R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020 & Attachments A/H500, A/H700.
Terminator®, Alligator and Rock & Frost Anti-Back Flex Chain,Teeth & Adapters
Page 62-63
Rock & Frost Chain,Teeth and Adapters for TA3110 Ultra Heavy-Duty Chain
Page 64
Rock & Frost Chain,Teeth and Adapters for R100, AR12, R150
Page 65-67
Rock & Frost TA4086 Chain,Teeth and Adapters for R100, AR12, R150
Page 68
Roller Chain Section
B a l l a n t i n e , I n c . • D i t c h W i t c h ® R e p l a c e m e n t P a r t s • P a g e ii
Trencher Chain Identification Sheet
Make of Machine: _____________________________________
Model:_______________________
Measure Pitch Size (Center of Pin to Center of Next Pin)
1.654"
2.000"
2.043"
2.609"
2.648"
3.067"
3.075"
3.110"
3.125"
3.250"
4.000"
4.500"
■
■
■
■
■
■
■
■
■
■
■
■
Every 4th Pitch Attachment Spacing
Anti-Backflex Chain
Every 2nd Pitch Attachment Spacing
K-Style Chain
Determining the number of pitches in a chain.
One pitch equals the distance from one pin to the next pin. The example below is 20 pitches long.
one pitch
Left-hand cutter
Right-hand Cutter
* Auburn Cutters are the Opposite
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 1
Chain Assembly Guide
GROUND CONDITIONS/APPLICATION
CHAIN ASSEMBLY OPTIONS
Heavy/Wet
Sandy
Loose Dirt
Medium
Hard
Rocky
Cup Assembly/4 pitch
Cup Assembly/2 pitch
Combo/Terminator-Cup
Combo/Rock & Frost-Cup
Full Terminator (bolt-on)
Full Rock & Frost (bolt-on)
LP Welded Terminator
LP Welded Alligator
LP Welded H-Plate
Anti Back–Flex Chains
Recommended as an upgrade to any of the chain assemblies listed.
ABF Chains are designed for more severe ground conditions.
This chart shows the most popular styles of chain assemblies and recommended guidelines as to their
usage. Only basic catagories of ground conditions are shown.
These are recommendations only. Please consult a Ballantine representative when matching chain
assemblies with specific ground conditions or any special application requirements.
Key:
Not Recommended
Recommended
Best
Parts for earlier models, not listed in this catalog are also available.
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 2
Chain Assembly Configurations
Cup Assembly – 2 Pitch
Cup Assembly – 4 Pitch
Combo/Terminator – Cup
Combo/Rock & Frost Cup
Full Terminator
Full Rock & Frost
LP Welded Alligator
LP Welded H-Plate
LP Welded Terminator
Ballantine, Inc. • Ditch Witch
Anti Back-Flex Chains
®
Replacement Par ts • Page 3
Ballantine, Inc.
Smart Part Numbering System
for Chain Assemblies
Ballantine's smart part numbering system has been developed to allow people to easily identify the various
chain assemblies that are available and what suits specific applications. The diagram below explains what each
section of the part number means.
B 20002 00 B 25
Number of Stations
(Tooth attaching points)
Chain Size
(see chart below) Digging Width
in inches
B = Ballantine
TA = Trench All®
AL = Alligator
SH = Terminator® Welded
D = Ditch Witch® teeth (1.654" only)
C = Case teeth® (1.654" only)
M = Melroe®/Bobcat®/Burkeen® teeth (1.654" only)
V = Vermeer® teeth (1.654" only)
T = Terminator® Bolt on the side
Assembly Configuration
B = Bare Chain
C = Cup Assembly
R = Rock & Frost
M = Mixed (Rock & Frost and Cup Teeth)
H = H-Plate
V = Alligator (.735)
D = Alligator (.765)
G = Ground breaker mixed chain
Ditch Witch® Chain Size Chart
TA1654-4
1.654" Pitch every 4th chain
(34,000 lb. T.S.)
TA1654-2
1.654" Pitch ABF chain
(34,000 lb. T.S.)
TA1654HD-2
1.654" Pitch Heavy Duty ABF chain (38,000 lb. T.S.)
2-4
2.00" Pitch every 4th chain
(50,000 lb. T.S.)
2ABF-2
2.00" Pitch ABF chain
(50,000 lb. T.S.)
3067HD-2
3.067" Pitch Heavy Duty chain
(110,000 lb. T.S.)
3067LD-2
3.067" Pitch Light Duty chain
(70,000 lb. T.S.)
3067ABF-2
3.067" Pitch ABF chain
(110,000 lb. T.S.)
3067-4
3.067" Pitch every 4th chain
(110,000 lb. T.S.)
TA3110-2
3.110" Pitch Trench All chain
(165,000 lb. T.S.)
TA4086-2
4.086" Pitch Trench All chain
(225,000 lb. T.S.)
450-2
4.500" Pitch R100 style chain
(150,000 lb. T.S.)
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 4
Chains for Ditch Witch®
Walk Along Models
1
2
3
Ref No.
1
2
3
Note:
Part No.
TA1654-4
TA1654-2
TA1654HD-2
Description
1.654" Pitch Chain every 4th
1.654" Pitch Chain ABF
1.654" Pitch Chain Heavy Duty ABF
Weight (lbs)
34,000 T.S.
34,000 T.S.
38,000 T.S.
The Trench-All® Chain lines are specifically engineered for today’s higher horsepower trenchers and their
roller style booms.
All Trench-All® Chains are ultra heavy duty anti back-flex chains with raised rivet design.
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 5
Drive Parts for Models M & M422 Series Trenchers
1
19
2
5
3
6
9
14
10
15
11
16
18
4
7
21
8
Ref No.
1
N/S
2
3
4
5
6
7
8
9
10
11
12
13
N/S
14
N/S
15
16
17
N/S
18
19
20
21
Part No.
B 165-415
B 165-416
B 165-944
B 105-067
B 105-065
B 180-031
B 180-037
B 155-802
B 110-003
B 125-204
B 125-203
B 125-205
B 115-454
B 180-035
B 180-036
B 180-032
B 105-461
B 105-331
B 105-330
B 115-465
B 105-704
B 140-702
B 145-047
B 105-352
B 140-038
12
17
20
13
Description
Head Shaft, 8" Pivot - 31" Long
Head Shaft, 12" Pivot - 341⁄2" Long
Key (1⁄4" x 13⁄4")
Bolt (1⁄2" N.C. x 23⁄4")
Nut Lock 1⁄2" N.C.
Dirt Shield
Spacer Seal
Seal
Bearing Shield
Cone Bearing
Cone Bearing W/ Seal
Bearing Cup
Retaining Ring
8" Pivot Spacer
12" Pivot Spacer
Spacer
Tang Washer
Lock Washer
Adjusting Nut.
Retaining Ring
5⁄16" Set Screws
Drive Sprocket, 13⁄8" Bore
Auger
Adjusting Screw
Adjusting Block
Weight (lbs)
13
15
.10
.06
.06
.1
.2
.0
.06
.19
.44
.19
.06
1.5
3.5
.1
.06
.06
.2
.06
.06
4
25
.63
1.5
Adjusting Miscellaneous Parts (not shown) for Model M
Part No.
B 140-718*
B 140-720*
B 125-010
B 155-814
B 155-815
B 165-320
B 165-321
B 170-002
B 170-005
Description
Sprocket Head Shaft 11⁄8” Bore (M3 - M389)
Sprocket Head Shaft 11⁄4” Bore (M3 - 22 or M329)
Drive Shaft Bearing (M2, M3)
Head Shaft Seal (M3, M389)
Dust & Dirt Seal (M3 - M389)
Head Shaft Drive - 8” Pivot (M3 or M389)
Head Shaft Drive - 12” Pivot (M3 or M329)
V Belt Set (3) (Model M3)
V Belt Set (3) (Model M)
Weight (lbs)
4.5
2.5
.7
.05
.1
8.65
12
2.2
3
* Measure bore size.
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 6
Boom, Auger and Drive Parts for Ditch Witch®
Models M Series, 1410, 1420, 1500, 1810, 1620,
350SX, 400SX & Model 2020 using Sprocket Boom
4
2
1
7
5
8
6
10
11
9
13
12
14
17
16
Ref No.
1
2
3
4
N/S
5
6
7
8
9
10
11
N/S
12
13
14
N/S
15
16
N/S
17
N/S
18
N/S
18
15
Part No.
B 105-352
B 140-038
B 105-515
B 140-551
B 140-552
B 180-445
B 140-775
B 140-759
B 115-464
B 115-554
B 140-028
B 140-712
B 140-653
B 105-379
B 125-009
B 140-051
B 140-060
B 142-006
B 181-361
B 184-017
B 145-204
B 145-183
B 140-703
B 130-124
Description
Square Head Set Screw
Boom Adj. Block
Cotter Pin (3⁄16" x 3")
Boom Extension, 1'
Boom Extension, 2'
Sq. Idler Shaft
Dirt Shield (2 Required)
Boom End Slide & Stop, Less Sprocket
Retaining Ring
Boom Spring
Sleeve, Boom
Idler, Sprocket
Sprocket Assembly (includes ref. #’s 11, 8, 14, 6)
Bolt (3⁄4" NC x 11⁄4")
Idler Sprocket, Bearing
Boom without Sprocket Assembly
Boom Complete with Slide & Stop, 2 Sprockets
Split Sprocket (142-039)
Hub for 1410/1420
Hub for 1620
Auger – 1410 & 1420 Only
Auger – 1810 Only
Drive Sprocket (1410, 1420, 1810 & 1500)
Drive Chain 1420 #50-92p (not shown)
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
.63
1.5
.06
11
16
.2
.25
11.07
.06
1.15
.39
6.5
7.85
.9
1.5
21.53
54
6.18
5
5
27.90
4.2
3.36
Replacement Par ts • Page 7
Boom and Drive Parts for Ditch Witch®
Models C-7, C-9, C77, C99 & 350SX
1
14
2
4
3
5
6
11
Ref No.
1
N/S
2
N/S
3
N/S
4
5
6
7
8
9
10
11
12
13
14
Part No.
140-088
140-090
140-499
140-498
140-712
140-653
140-770
115-553
115-001
140-775
125-009
115-464
180-445
105-379
105-372
140-794
105-352
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
10
12
7
8
9
13
Description
Boom Assembly (Less Sprocket)
Boom Assembly (With Sprocket)
Boom Only
Boom Assembly
Sprocket
Sprocket Assembly (includes ref. #’s 2, 6, 7, 8)
Slide & Stop
Boom End Spring
Zerk Fitting (1⁄8" NPT Str)
Washer, Shield
Bearing, Idler Sprocket
Snap Ring, Idler Sprocket
Idler Shaft
Bolt (3⁄4" x 11⁄4")
Lock Nut (3⁄4")
Boom End
Square Head Set Screw
Weight (lbs)
17
26
6.5
7.5
6.5
.63
.06
.25
1.5
.06
1
.19
.10
7.6
.63
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 8
Boom and Drive Parts for Ditch Witch®
Models C-7, C-9, C77, C99 & 350SX,
continued
17
15
16
21
31
18
22
19
23
26
25
20
24
32
27
29
28
30
Ref No.
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
NS
NS
NS
Part No.
145-099
115-465
140-703
110-003
155-802
125-204
125-203
125-205
180-037
180-031
115-657
170-033
130-006
130-008
130-001
130-002
140-028
105-047
170-006
170-001
105-146
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Description
Auger
Snap Ring
Drive Sprocket 13⁄8" Bore
Machinery Bushing
Seal
Bearing
Bearing
Race
Seal Cover
Dirt Shield
Urethane Washer
Belt Set (3 Belts)
Drive Chain (101 P) #40RC
Drive Chain (103 P) #40 RC
Connector Link
Offset Link
Boom Sleeve
Locknut (3⁄8")
Belt Set, C49 - Steel Cable (2)
Belt Set, (2) Models (C2, C3, C4, C49)
Bolt (3⁄8" NC x 21⁄4")
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
15
.06
4.2
.10
.10
.19
.44
.19
.2
.1
.06
2.75
1.75
2
.09
.02
.5
.06
1.5
1
.06
Replacement Par ts • Page 9
Teeth and Accessories for Ditch Witch® Trencher Models
M Series, C Series, J-20, 1410, 1420, 1500, & 1810 using 1"
Hole Spacing on side bars for cutters
23
21
20
24
22
Replacement Drive Shaft for Ditch Witch® Models C7, C9, C77 & C99
Ref No.
22
23
24
N/S
Part No.
B 165-443
B 105-330
B 105-331
B 105-461
Description
Head Shaft (Replaces # B 165-382)
Nut (1-3/8" NF) (Replaces # B 105-380)
Lockwasher (1-3/8" NF) (Replaces # B 105-381)
Tang Washer - Not Shown
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
11
.25
.06
.06
Replacement Par ts • Page 10
Chain, Teeth and Accessories for Ditch Witch®
Models M Series, C Series, 350SX, 400SX, 1010,
1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1620,
1810, 1820, 2020 & 2200
(1.654" Pitch Chain with 13⁄4" Side Bar Hole Spacing)
1
19
9
10
12
7
6
16
20
18
13
14
24
11
26
29
17
15
21
8
Ref No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Part No.
TA1654-4
B 136-024
B 136-025
B 1010CCL
B 1010CCR
B 105-047
38LW
B 105-099
B 136-028
B 135-320
B 105-098
6576368
B 105-162
B 105-183
B 105-052
B 136-027
B 136-029
B 105-075
B 137-001
B 137-007
B 137-003
Description
1.654" Pitch every 4th
Tooth RH
Tooth LH
Tooth LH (MTO Only)
Tooth RH (MTO Only)
Locknut (3⁄8")
Lockwasher (3⁄8")
Bolt (3⁄8" x 7⁄8")
Tooth Spacer (3⁄8" x 1")
Tubular Spacer (outside) (181-650)
Bolt (3⁄8" x 3")
Tubular Spacer (cup-cutter, inside) (181-651)
Bolt (3⁄8" x 21⁄4")
Bolt (3⁄8" x 21⁄2") (709-915)
Bolt (3⁄8" x 11⁄4")
5" Flat Spacer
Tooth Spacer (1" sq)
Bolt (3⁄8" x 2")
Conn Pin
Key
Roller Link
Weight (lbs)
34K T.S.
.55
.55
.55
.55
.02
.05
.06
.25
.1
.06
.06
.06
.06
.06
.75
.06
.10
.01
.24
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 11
Chain, Teeth and Accessories for Ditch Witch®
Models M Series, C Series, 350SX, 400SX, 1010,
1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1620,
1810, 1820, 2020 & 2200, continued
(1.654" Pitch Chain with 13⁄4" Side Bar Hole Spacing)
22
32
30
31
25
23
5
2
3
28
Ref No. Part No.
22
B 137-015
B 137-014
23
B 136-047
24
B 500-003
25
B 136-048
26
B 105-258
27
1010GBL
28
1010GBR
29
B 105-022
30
B 137-002H
31
TA1654-4CL
32
B 136-049
4
Smart Pt. No.
B1370200B26
B1370200B08
27
Description
Chain (7' 2") 2 pitch spacing
Chain (2' 2") 2 pitch spacing
Adapter for 8" cut
Bolt (3⁄8" x 23⁄4") (for 8" adapter)
Adapter 10" cut
Bolt (3⁄8" x 33⁄4") (for 10" adapter)
Ground Breaker L.H.
Ground Breaker R.H.
Bolt (3⁄8" x 4")
Conn Link Double Standard
Conn Link Single Standard
Adapter 12" cut
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
11.52
35.30
2.35
.06
3.05
.06
.75
.75
.07
1.4
1.1
4.25
Replacement Par ts • Page 12
Roller Booms, Sprockets, Rollers, and Bearings for
Ditch Witch® Models 1010, 1020, 1030, 1210, 1220,
1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820 &
2020
1
5
4
10
9
2
15
6
12
11
8
3
17
13
16
7
14
19
20
18
21
Ref No.
1
N/S
2
N/S
3
N/S
4
5
6
7
8
9
10
11
12
13
N/S
14
15
16
17
18
19
20
21
Part No.
140-488
140-487
140-534
140-533
143-096
143-093
105-300
105-310
106-033
105-352
106-034
110-054
184-037
115-464
125-009
142-755
142-754
183-469
105-379
165-985
165-923
145-265
145-271
145-309
140-703
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Description
24" Roller Boom Only (U-Bracket)
24" Boom Assembly with Roller (U-Bracket)
24" Roller Boom Only (Flat Back) (140-550)
24" Boom Assembly with roller (Flat Back)
30" Roller Boom Only
30" Boom Assembly with Roller
Bolt (1⁄2" X 31⁄4")
3⁄4" Jam Nut
1" Jam Nut
Set Screw (3⁄4" X 5")
Screw Set (1" x 6")
Machinery Bushing
Machinery Bushing (1⁄8" thick)
Snap Ring
Bearing
Roller Only
Roller Assembly with Bearing
Idler Shaft
Bolt (3⁄4" X 11⁄4")
Key (1⁄4" sq x 21⁄4" long)
Key (1⁄4" sq x 2" long)
Auger
Auger (Long–41⁄2" Collar)
Outboard Bearing Auger (Not for model 1820)
Drive Sprocket
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
35
42.1
30
42
.21
.06
.07
.10
.2
.06
.1
.06
1.50
7.8
12.65
.9
.9
.03
.03
13.55
4.2
Replacement Par ts • Page 13
Roller Booms, Sprockets, and Roller for
Ditch Witch® Models 1030, 1210, 1220, 1230, 1330,
1410, 1420, 1610, 1620, 1810, 1820, & 2020
1
3
5
4
6
2
7
8
10
15
12
13
9
11
Ref No.
Pg.14
N/S
1
N/S
N/S
N/S
2
N/S
3
4
5
6
7
8
9
10
11
N/S
12
13
14
15
N/S
Part No.
B 143-096
B 143-093
B 140-519
B 140-518
B 140-527
B 140-531
B 142-755
B 142-754
B 110-054
B 184-037
B 125-009
B 115-464
B 180-445
B 105-379
B 106-034
B 106-033
B 142-006
B 142-039
B181-361
B 184-017
B 140-703
B 165-923
B 142-023
14
Description
Roller Boom, 30" (Boom Only)
Roller Boom Assembly , 30"
Roller Boom 36" (Boom Only)
Roller Boom Assembly 36"
Roller Boom 48" (Boom Only)
Roller Boom Assy 48"
Roller Only
Roller Assembly (brg. Snap Ring, Washer)
Machinery Bushing
Machinery Bushing (1⁄8" thick)
Bearing
Snap Ring
Sq. Idler Shaft
Bolt
Adjusting Screw (1" X 6" n.c)
Nut (1" n.c.)
Sprocket, Split (Not for model 1820)
Sprocket, Split
Hub
Sprocket Hub (184-205) (1620)
Drive Sprocket
Key
Hex Drive Sprocket (2020)
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
47
60.50
80
7.8
12.65
.06
.1
1.5
.06
.75
.19
1.3
.15
6.18
6.25
4.2
.03
Replacement Par ts • Page 14
Boom Parts for Ditch Witch® Models
J20, 2200, 2300, 2310, 3610, RT36 &
Attachments H311, H312
1
3
2
8
12
5
4
6
10
7
15
11
16
14
9
17
13
Ref No.
1
2
3
4
N/S
5
N/S
6
7
8
9
N/S
N/S
10
11
12
13
N/S
14
15
16
N/S
N/S
17
N/S
Part No.
140-759
105-379
180-445
140-712
140-653
140-711
140-652
125-009
140-775
115-464
140-062
140-061
140-057
115-001
140-028
115-554
140-551
140-552
140-038
105-352
140-701
140-721
170-020
170-061
140-007
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Description
Boom End Slide & Stop, Less Sprocket
Bolt (3⁄4" x 11⁄4")
Sq. Idler Shaft
Idler Sprocket, 12 Tooth - 1.654" Std. Chain
Std. Sprocket Assembly, 12 Tooth - 1.654" Std. Chain
Idler Sprocket, 9 Tooth - 2" H.D. Chain
H.D. Sprocket Assembly, 9 Tooth -2" H.D. Chain
Square Hole Bearing
Dirt Shield
Retaining Ring
Digging Boom, Without Sprockets
Digging Boom Assy. with 3 Sprockets - Std. 1.654"
Digging Boom Assy. with 3 Sprockets - 2" H.D.
Straight Zerk 1⁄8" NPT
Urethane Boom Sleeve
Digging Boom Spring
1' Digging Boom Extension
2' Digging Boom Extension
Boom Adjusting Block
Set Screws Boom Adjustment
Head Shaft Drive Sprocket - 1.654" Std.
Head Shaft Drive Sprocket - 2" H.D. Chain
V Belt Set
V Belt Set
Boom Gussets
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
12
.3
1
6.5
8
7
9
1.5
1
.06
34
74
71
.01
.4
1.2
11
16
1
.63
5
5.5
2
2
7
Replacement Par ts • Page 15
Boom, Sprockets, Bearings and
Belts for Ditch Witch® Model 2200, RT36
1
2
6
3
7
5
4
9
8
10
12
11
Ref No.
1
N/S
N/S
2
3
4
N/S
5
N/S
6
7
8
9
10
11
12
13
N/S
Part No.
B 140-242
B 140-240
B 140-241
B 140-013
B 115-557
B 140-712
B 140-653
B 140-711
B 140-652
B 115-464
B 140-775
B 125-009
B 180-445
B 105-379
B 140-763
B 140-583
B 140-588
B 140-585
13
Description
Boom, Less Sprockets
Boom Assy. (1.654" Pitch Small Sprockets)
Boom Assembly (2" Pitch Large Sprockets)
Boom Sleeve
Boom Spring
Sprocket (1.654" Pitch)
Sprocket Assembly (1.654" Pitch)
Sprocket (2" Pitch)
Sprocket Assembly (2" Pitch)
Snap Ring
Dirt Shield
Sq. Hole Bearing
Sq. Shaft
Bolts (3⁄4" X 11⁄4")
Boom End
Boom Ext. (1') With 1.654" Sprockets
Boom Ext. (1') With 2" Sprocket
Boom Ext. (2') Use With Both Sprockets
Weight (lbs)
44
81
86
.5
2.26
6.5
7.8
7
7.5
.06
.25
1.5
1
.19
16
24
23
34
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 16
Boom, Sprockets, Bearings and Belts for
Ditch Witch® Model 2200 & RT36, continued
16
15
23
17
18
20
19
14
26
21
24
22
25
Ref No.
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
105-265
142-005
140-701
181-267
180-028
155-704
180-026
155-801
170-028
145-173
170-061
167-003
165-901
B
B
B
B
B
B
B
B
B
B
B
B
B
Description
Bolt (for Split Sprocket)
Head Shaft Sprocket (Split 2" Pitch)
Head Shaft Sprocket (1.654" Pitch)
Hub For Split Sprocket
Seal Spacer
O Ring
Fiber Spacer
Seal
Belt Set
Auger
Belt Set (3)
Headshaft With Races & Sleeves
Key
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
.13
4.5)
7.65
3
1.45
.01
.01
.2
1.10
23.5
1.78
24.9
.03
Replacement Par ts • Page 17
Chains for Ditch Witch®
Mid-Size Riding Trenchers
1
2
Ref No.
1
1
2
2
Part No.
135-214
135-212
137-215
137-216
B
B
B
B
Smart Pt. No.
B2000400B18
B2000400B06
B2ABF00B36
B2ABF00B12
Description
Chain, 72P, 4 pitch spacing (bare)
Chain, 24P, 4 pitch spacing (bare)
Chain, 72P, 2 pitch spacing, anti back flex, (bare)
Chain, 24P, 2 pitch spacing, anti back flex, (bare)
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
90
30
108
38
Replacement Par ts • Page 18
Sprocket Style Booms, Sprockets and
Bearings for Ditch Witch® Models 2200, 2300,
2310, 3610, RT36 & Attachments H311, H312
1
2
5
3
7
)
(
4
16
10
8
9
11
15
14
12
6
13
18
17
Ref No.
1
N/S
2
3
4
5
6
N/S
7
8
9
10
11
N/S
12
13
14
N/S
N/S
N/S
15
16
17
18
N/S
Part No.
B 140-248
B 140-241
B 115-009
B 125-209
B 115-557
B 140-013
B 140-707
B 140-654
B 140-765
B 180-062
B 180-448
B 105-313
B 140-588
B 140-585
B 142-005
B 181-267
B 105-265
B 125-002
B 125-247
B 125-246
B 180-534
B 145-173
B 167-003
B 165-901
B 170-063
Description
Weight (lbs)
Boom, Less Sprocket
43.7
Boom Assembly
80.3
Zerk
.06
Bearing Assembly
1.5
Boom Spring
2.26
Boom Sleeve
.55
Sprocket, Idler (Less Bearings)
5.7
Sprocket Assembly (includes Ref. #’s 6, 3, 8)
6.6
Slide & Stop
18.1
Dirt Shield
.19
Idler Bolt for Boom End
1.13
Idler Nut
.19
1' Boom Extension
20.4
2' Boom Extension
29.05
Headshaft Sprocket (Split)
5.7
Hub For Split Sprocket (13⁄4" Bore; 1⁄2"DBL Keyways)
3
Special Bolt (For Split Sprocket)
.13
Bearing (Not Shown)
2
Bearing (Not Shown)
.88
Bearing (Not Shown)
1
Idler Bolt, Long
1.55
Auger
25.3
Headshaft With Races & Sleeve
24.95
Key
.10
Belt Set (set of 4) (not shown)
2.49
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 19
Roller Booms, Sprockets and Roller for
Ditch Witch® Models 2300, 2310, 3500,
3610, 3700, 4500 & Attachments H300, H313,
H314 continued
1
2
3
8
7
(
6
Ref No.
1
N/S
N/S
N/S
2
N/S
3
4
5
6
7
8
9
N/S
N/S
N/S
10
N/S
)
Part No.
B 140-503
B 140-502
B 140-509
B 140-515
B 142-752
B 142-751
B 180-448
B 105-313
B 180-062
B 125-209
B 106-034
B 106-033
B 142-025
B 142-127
B
B
B
B
142-044
142-029
142-026
142-030
4
5
10
9
Description
Weight (lbs)
Roller Boom Only (47.95") (3’ Dig Depth (36T)
110
Roller Boom Assy (47.95")
170
Roller Boom Only (59.2") (4’ Dig Depth (42T)
115
Roller Boom Assembly (59.2")
164
Roller Only
26.41
Roller Assembly
27
Idler Shaft
1.13
Nut.
.19
Shield
.12
Bearing Assembly (2)
1
Adjustment Screw 1 x 6"
1.3
Nut (1" NC)
.06
5
Drive Sprocket (12 Tooth) with ⁄8" holes
9
Drive Sprocket (12 Tooth) Split for 2” pitch – Metric
(12 tooth option for H313, H314)
9
14 tooth option for H313, H314 – Metric
9
1
Drive Sprocket (12 Tooth) with ⁄2" holes
9
Dr.ive Sprocket (14 Tooth) with 5⁄8" holes
13.8
Drive Sprocket (14 Tooth) with 1⁄2" holes
13.8
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 20
Roller Booms, Sprockets and Roller for
Ditch Witch® Models 2300, 2310, 3500,
3610, 3700, 4500 & Attachments H300 Series,
H314, H514, H515, H552 continued
11
12
15
13
16
14
17
Note: H300 & H500 series can also use 3.067” Pitch Chain
Ref No. Part No.
11
B 142-021
B 142-020
12
B 142-031
13
B 181-267
14
B 105-265
15
B 142-005
16
B 105-472
17
B 105-833
Description
Boom End Sprocket
Boom End Sprocket Assembly with Bearings
Hex Bore Auger Sprocket (H300 series)
Sprocket Hub
Bolt for Split Sprocket
Drive Sprocket (2300, 2310, 3610)
Bolt (1⁄2" NC x 5")
Flange Locknut (1⁄2" NC)
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
3
.13
5.7
.02
Replacement Par ts • Page 21
2" Pitch Chain, Teeth & Accessories for
Ditch Witch® Models J20, 2200, 2300,
2310, 3500, 3610 & 3700, RT36 &
Attachments H300 Series, H500 Series
11
1
18
2
5
4
12
16
6
10
3
8
7
9
20
19
17
13
14
15
21
Ref No.
1
2
3
4
5
6
7
8
9
N/S
N/S
10
11
12
13
13
14
15
16
17
18
19
20
21
Part No.
B 135-924
B 135-925
B 105-043
B 105-111
B 105-067
B 105-082
B 135-912
B 135-950
B 135-913
B 135-914
B 135-915
B 105-002
B 105-065
B 105-076
B 135-213
B 135-210
B 135-351
B 135-358
B 135-202
B 135-202H
B 135-203
B 135-501
B 135-502
2ABF-2
Smart Pt. No.
B2000400B17
B2000400B03
Description
Cutter, R.H.
Cutter, L.H.
Bolt (1⁄2" x 1")
Bolt (1⁄2" x 4")
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 21⁄2")
Adapter 8"
Adapter 10"
Adapter 12"
Adapter 14"
Adapter 16"
Bolt (1⁄2" x 21⁄4")
Nut (1⁄2")
Bolt (1⁄2" x 3")
Chain, Less Teeth 11'4"
Chain, Less Teeth 2'
Chain Pin
Cotter Key
Conn. Link
Conn. Link ( 2 pitch spacing)
Roller Link
Ground Breaker, L.H.
Ground Breaker, R.H.
Chain, 2" Pitch ABF
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
.9
.9
.06
2.88
3.44
4.40
.06
.06
.06
85
15
.2
.01
1
.4
1
1
1
Replacement Par ts • Page 22
Booms, Sprockets, Bearings & Belts
for Ditch Witch® Models V30, R30, & 3210
2
1
3
4
7
(
11
8
5
)
6
9
10
12
13
Ref No.
1
2
N/S
3
4
N/S
5
6
7
8
9
10
11
N/S
N/S
N/S
12
13
14
15
Part No.
B 140-765
B 140-707
B 140-654
B 140-013
B 140-006
B 140-059
B 125-209
B 115-557
B 115-009
B 105-313
B 180-448
B 180-062
B 140-553
B 140-565
B 140-554
B 140-562
B 140-704
B 142-005
B 181-267
B 140-732
14
Description
15
Weight (lbs)
Boom End
17.62
Idler Sprocket
6.50
Sprocket Assembly
7.54
Urethane Boom Sleeve
.5
Boom Only
47.50
Boom Assembly With 3 Sprockets
100
Idler Bearing Assembly
1.5
Boom Spring
2.26
Zerk (1⁄4" Straight)
.06
1
Jam Nut (1 ⁄4")
.19
Idler Bolt. (Slide & Stop)
1.13
Dirt Shield
.19
2' Boom Extension With Gussets
38
2' Boom Extension Assy (incl. ref. no.’s #2, 5, 7, 8, 9 & 10) 45
3' Boom Extension (same style as ref. #11)
50
3' Boom Extension Assy (incl. ref. no.’s #2, 5, 7, 8, 9 & 10) 60
Sprocket Drive (V30) 13⁄4" Bore; 9 Tooth, 1⁄2" DBL Keyways 7.44
Drive Sprocket, Split (V30)
6.75
Sprocket Hub (V30)
3
Drive Sprocket, Split (R30, R40 & 3210) 14 Tooth
13.75
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 23
Booms, Sprockets, Bearings & Belts
for Ditch Witch® Models V30, R30,
& 3210, continued
21
19
18
17
25
24
22
27
23
26
29
28
Ref No.
17
18
19
20
21
22
23
N/S
24
25
26
27
28
29
30
N/S
Part No.
B 181-048
B 140-728
B 125-517
B 165-410
B 125-246
B 180-029
B 170-019
B 170-041
B 180-252
B 180-534
B 165-371
B 142-007
B 142-010
B 140-664
B 140-730
B 140-731A
30
Description
Sprocket Hub (R30 & R40)
Auger Shaft & Sprocket (R30 & R40)
Pillow Block Bearing
Headshaft With Races & Sleeve 12" pivot
Race, Headshaft
Sleeve, Headshaft
V Belts (4)
V Belt Set (not shown)
Spacer
Idler Bolt, Long (for Boom Idler)
Headshaft (Fits Low Digging Attachment)
Auger Sprocket (2"P)
Drive Sprocket (2"P, One Piece)
Hex Auger Sprocket, 2" P
Idler Sprocket (14 Tooth)
Idler Sprocket Assembly (B 140-659)
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
6.5
33
10.38
28
1
.25
22
1.75
.25
2.65
29
Replacement Par ts • Page 24
2" Pitch Chain, Teeth and Accessories for
Ditch Witch® Models V30, R30, 3210, 3500,
3610, 3700, 4500
1
15
16
2
11
4
3
10
9
6
8
5
Ref No.
1
1
1
2
3
N/S
4
N/S
5
6
7
8
9
10
11
N/S
N/S
Part No.
B 135-214
B 135-212
B 135-210
2ABF-2
B 135-924
B135924516
B 135-925
B135925516
B 105-043
B 105-111
B 105-067
B 105-082
B 135-912
B 135-950
B 135-913
B 135-914
B 135-915
Smart Pt. No.
B2000400B18
B2000400B06
B2000400B03
Description
Chain, 12' (4 pitch spacing) Bare
Chain, 4' Bare
Chain, 2' Bare
Chain, 2" Pitch ABF
Cutter, R.H.
Cutter, R.H. (HD 5⁄16" Thick)
Cutter, L.H.
Cutter, L.H. (HD 5⁄16" Thick)
Bolts (1⁄2" x 1")
Bolt (1⁄2" x 4")
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 21⁄2")
Adapter, 8"
Adapter, 10"
Adapter, 12"
Adapter, 14"
Adapter, 16"
7
Weight (lbs)
90
30
15
.9
1.0
.9
1.0
.06
2.88
3.44
4.44
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 25
2" Pitch Chain, Teeth and Accessories for
Ditch Witch® Models V30, R30, 3210, 3500,
3610, 3700, 4500, continued
20
13
19
17
18
14
12
Ref No.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Part No.
B 105-002
B 105-065
B 105-076
B 135-351
B 135-358
B 135-202
B 135-203
B 135-501
B 135-502
B 105-066
B 105-121
B 135-952
B 135-951
B 135-953
B 105-136
V30
24
25
27
23
26
21
22
Description
Bolt (1⁄2" x 21⁄4")
Nut (1⁄2" NC)
Bolt (1⁄2" x 3")
Chain Pin
Cotter Key
Conn. Link
Roller Link
Ground Breaker L.H.
Ground Breaker R.H.
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 2")
Chain Spacer (Outside) (1.810” Long)
Chain Spacer (Inside) (1.590” Long)
Chain Spacer (2 Inside) (1.300” Long)
Bolt (1⁄2" x 31⁄2")
Flat Spacer
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
.06
.06
.06
.2
.01
1
.1
1
1
.06
.06
.16
.12
.12
.06
Replacement Par ts • Page 26
Boom Sprockets, Bearings, Auger Shafts, and
Accessories for Ditch Witch® Models 3610, RT36,
R40, 4010 & Attachments H300 Series, H500
Series, A/H 400, A/H 500 using 2" Pitch Chain
1
2
4
3
7
5
6
8
9
10
11
17
14
12
16
13
Ref No.
1
N/S
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
15
Part No.
B 140-707
B 140-654
B 125-209
B 180-448
B 105-313
B 180-062
B 140-732
B 181-048
B 105-302
B 105-385
B 180-057
B 145-475
B 155-703
B 155-805
B 125-259
B 125-258
B 180-071
B 140-728
Description
Idler Sprocket
Idler Sprocket Assembly (Includes Ref. #’s: 1, 2, 5)
Bearing Assembly
Idler Shaft (slide and stop)
Idler Nuts
Idler Shields
Drive Sprocket (Split)
Sprocket Hub
Bolts (5⁄8" x 2")
Lock Washer (5⁄8")
Seal Spacer
Washer, Pivot Tube
O-Ring
Seal
Bearing
Race
Backup Ring
Auger Shaft & Sprocket
Weight (lbs)
6.5
7.5
1
1.1
.19
19
14
3.5
.25
.06
2.1
.03
.10
.10
1.5
.10
.13
33
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 27
Boom Sprockets, Bearings, Auger Shafts, and Accessories
for Ditch Witch® Models 3610, RT36, R40, 4010 &
Attachments H300 Series, H500 Series, A/H 400, A/H
500 using 2" Pitch Chain, continued
24
20
18
19
23
22
21
25
30
29
28
26
27
32
31
Ref No.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Part No.
145-071
145-110
145-070
145-109
125-517
105-320
130-307
130-304
130-305
125-502
170-038
170-059
181-051
165-368
142-007
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Description
Auger, L.H.
Auger, L.H. (Short)
Auger, R.H.
Auger, R.H. (Short)
Pillow Block Bearings 13⁄4" I.D.
Bolt (3⁄4" x 21⁄4" NC)
Drive Chain (80-80P)
Connector Link (#80)
Offset Link (#80)
11⁄4" P.B. Bearing
Power Band V Belts (2 Belts) – 4 grooves each
Power Band V Belts (4 Belts) – 2 grooves each
Shield (R40)
Shaft
Auger Sprocket
Weight (lbs)
53
53
10.5
.25
11.5
.13
.17
7.0
2.0
2.0
.06
4.0
19
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 28
Boom Sprockets, Bearings, Auger Shafts, and
Accessories for Ditch Witch® Models 3610, RT36,
R40, 4010 & Attachments H300 Series, H500 Series,
A/H 400, A/H 500 using 2" Pitch Chain, continued
33
34
35
37
36
39
38
42
43
44
40
41
Ref No.
33
34
35
36
N/S
37
38
39
40
41
42
43
44
Part No.
B 180-534
B 165-371
B 142-010
B 140-730
B 140-731A
B 140-664
B 125-620
B 145-244
B 110-363
B 110-364
B 125-048
B 142-031
B 105-313
Description
Idler Shaft, Long
Headshaft (Fits Low Digging Attachments)
One piece Drive Sprocket, 14T
Idler Sprocket (14 Tooth)
Idler Sprocket Assembly (B 140-659)
Auger Sprocket, 2" P
Hex Bearing Assembly
Hex Auger Shaft
Flange (LS)
Flange (NLS)
Hex Bearing
Auger Sprocket (H312)
Idler Nut
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
2.0
29
Replacement Par ts • Page 29
2" Pitch Chain,Teeth & Accessories for
Ditch Witch® Models R40, 3210, 3500,
3700, 4010, 4500, RT36, RT40
1
15
2
16
13
4
3
10
6
9
14
7
5
Ref No.
1
1
1
1
2
3
N/S
4
N/S
5
6
7
8
9
10
11
N/S
N/S
12
13
14
15
16
Part No.
B 135-214
B 135-212
B 135-211
B 135-210
2ABF-2
B 135-924
B135924516
B 135-925
B135925516
B 105-043
B 105-111
B 105-067
B 105-082
B 135-912
B 135-950
B 135-913
B 135-914
B 135-915
B 105-002
B 105-065
B 105-076
B 135-351
B 135-358
8
11
12
Smart Pt. No.
B2000400B18
B2000400B06
B2000400B04
B2000400B03
Description
Chain 12' Less Teeth (4 Pitch Spacing)
Chain 4' Less Teeth
Chain 2' 8" Less Teeth
Chain 2' Less Teeth
Chain 2" Pitch ABF
Cutter, R.H.
Cutter, R.H. (HD 5⁄16" Thick)
Cutter, L.H.
Cutter, L.H. (HD 5⁄16" Thick)
Bolts (1⁄2" x 1")
Bolt (1⁄2" x 4")
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 21⁄2")
Adapters, 8"
Adapters, 10"
Adapters, 12"
Adapter, 14"
Adapter, 16"
Bolt (1⁄2" x 21⁄4")
Nut (1⁄2" N.C)
Bolt (1⁄2" x 3")
Chain Pin
Cotter Key
Weight (lbs)
90
30
20
15
.9
1.0
.9
1.0
.06
2.88
3.44
4.44
.06
.06
.2
.2
.01
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 30
2" Pitch Chain,Teeth & Accessories for
Ditch Witch® Models R40, 3210, 3500,
3700, 4010, 4500, RT36, RT40, continued
18
27
17
28
20
19
26
21
Ref No.
17
18
19
20
21
22
23
24
25
26
27
28
Part No.
B 135-202
B 135-203
B 135-501
B 135-502
B 105-066
B 105-121
B 135-952
B 135-951
B 135-953
B 105-136
B135-202H
V30
25
24
23
22
Description
Conn. Link
Roller Link
Ground Breaker L.H
Ground Breaker R.H.
Bolt (1⁄2" x 13⁄4")
Bolt (1⁄2" x 1")
Chain Spacer (Outside) (1.810” Long)
Chain Spacer (Inside) (1.590” Long)
Chain Spacer (2 Inside) (1.300” Long)
Bolt (1⁄2" x 31⁄2")
Connecting Link (2 pitch chain)
Flat Spacer
Weight (lbs)
1
.117
1
1
.06
.06
.16
.16
.16
.06
1.75
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 31
2" Pitch Anti-Back Flex Chain and Accessories for
Ditch Witch® Models J20, 2200, 2300, 2310, 3500,
3700,V30, R30, R40, 3210, 3610, 4010, 4500
1
4
9
5
11
10
3
2
7
8
6
Ref No.
1
1
1
1
1
2
3
4
5
6
7
8
N/S
N/S
9
10
N/S
11
N/S
Part No.
B 137-218
B 137-215
B 137-216
B 137-217
B 137-219
B 137-202
B 137-203
B 137-351
B 137-207
B 135-912
B 135-950
B 135-913
B 135-914
B 135-915
B 105-002
B 135-924
B135924516
B 135-925
B135925516
Smart Pt. No.
B2ABF00B34
B2ABF00B36
B2ABF00B12
B2ABF00B06
B2ABF00B08
Description
ABF Chain, 11' 4" Bare
ABF Chain, 12' Bare
ABF Chain, 4' Bare
ABF Chain, 2' Bare
ABF Chain, 2' 8" Bare
Connecting Link
Roller Link
Pin & Cotter
Lock Key
Adapters, 8"
Adapters, 10"
Adapters, 12"
Adapter, 14"
Adapter, 16"
Bolt (1⁄2" x 21⁄4")
Cutter, R.H.
Cutter, R.H. (HD 5⁄16" Thick)
Cutter, L.H.
Cutter, L.H. (HD 5⁄16" Thick)
Weight (lbs)
100
108
36
18
24
1.75
1.2
.21
.01
2.88
3.44
4.44
.06
.9
1.0
.9
1.0
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 32
2" Pitch Anti-Back Flex Chain and Accessories
for Ditch Witch® Models J20, 2200, 2300, 2310,
3500, 3700,V30, R30, R40, 3210, 3610, 4010,
4500, continued
20
16
12
14
19
21
22
15
18
17
23
13
25
24
Ref No.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
26
Part No.
B 105-043
B 105-065
B 105-066
B 105-121
B 105-076
B 135-952
B 135-951
B 135-953
B 105-136
B 105-111
B 105-067
B 105-082
B 135-501
B 135-502
V30
Description
Bolt (1⁄2" x 11⁄4")
Locknut
Bolt (1⁄2" x 13⁄4")
Bolt (1⁄2" x 1")
Bolt (1⁄2" x 3")
Chain Spacer (Outside) (1.810” Long)
Chain Spacer (Inside) (1.590” Long)
Chain Spacer (2 Inside) (1.300” Long)
Bolt (1⁄2" x 31⁄2")
Bolt (1⁄2" x 4")
Bolt (1⁄2" x 23⁄4")
Bolt (1⁄2" x 21⁄2")
Ground Breaker, L.H.
Ground Breaker, R.H.
Flat Spacer
Weight (lbs)
.06
.06
.06
.06
.16
.16
.16
.06
1
1
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 33
Chains for Ditch Witch®
Large Riding Trenchers
1
2
3
4
5
Ref No.
1
2
3
4
5
Part No.
B 135-704
B 135-411
B 135-411-4
B 137-411
N/A
Smart Pt. No.
B3067LD00B32
B3067HD00B32
B30670400B16
B3067ABF00B32
TA311000B32
Description
Weight (lbs)
70,000 Lb. Chain, Bare, 64 pitches (2P)
256
110,000 Lb. Chain, Bare, 64 pitches (2P)
288
110,000 Lb. Chain, Bare, 64 pitches (4P)
210
110,000 Lb. Anti back-flex Chain, Bare, 64 pitches (2P)
298
165,000 Lb.Trench-All® Chain, Bare, 64 pitches (2P)
300
Note: The Trench-All® Chain lines are specifically engineered for today’s higher horsepower
trenchers and their roller style booms.
All Trench-All® Chains are extra heavy duty anti back-flex chains with raised rivet design.
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 34
Boom Sprockets, Bearings, Augers, and Accessories
for Ditch Witch® Models R30, R40, 3210, 4010 &
Attachments H300, A/H400, A/H500 using 3" Pitch
Chain
2
1
7
5
9
8
6
10
4
3
11
13
15
14
12
16
17
18
19
20
22
Ref No.
1
N/S
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
21
23
Part No.
B 140-723
B 140-656
B 125-263
B 180-026
B 155-843
B 180-243
B 115-470
B 180-244
B 180-440
B 180-441
B 105-377
B 140-717
B 181-048
B 105-302
B 105-385
B 180-057
B 145-475
B 155-703
B 155-805
B 125-259
B 125-258
B 180-071
B 145-071
B 145-070
Description
Weight (lbs)
Idler Sprocket
26.5
Idler Sprocket Assembly
25.0
Bearing, Idler Sprocket (Incl: Part #125-265 & 125-266)
1.5
Spacer
.1
Seal
.06
Bearing Spacer
.31
Retaining Ring
.01
Spacer
.10
Idler Shaft (Slide & Stop)
3
Idler Shaft (Boom)
3.0
Idler Shaft Nut
.5
Headshaft Sprocket (Split)
15.0
Sprocket Hub
7.0
Bolt (5⁄8" x 2")
.25
5⁄8" L.W.
.06
Seal Spacer
2.1
Washer, Pivot Tube
.03
O-Ring
.1
Seal
.25
Bearing
1.5
Race
1
Backup Ring
.13
Auger, L.H.
53
Auger, R.H.
53
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 35
Boom Sprockets, Bearings, Augers, and Accessories for
Ditch Witch® Models R30, R40, 3210, 4010 &
Attachments H300, A/H400, A/H500 using 3" Pitch
Chain, continued
29
24
26
25
27
30
28
32
33
35
31
34
40
41
36
37
38
39
Ref No.
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Part No.
145-109
145-110
125-517
105-320
140-725
130-307
130-304
135-305
125-502
170-038
142-009
140-665
142-008
125-048
125-620
145-244
110-363
110-364
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Description
Auger R.H., Short
Auger L.H., Short
Pillow Block Bearing
Bolt (3⁄4" x 21⁄4")
Auger Sprocket & Shaft
Drive Chain (#80-80P)
Connector Link (#80)
Offset Link (#80)
11⁄4" Pillow Block Bearing
Power Band V Belts
Headshaft Sprocket (One piece)
Hex Auger Sprocket
Auger Sprocket
Hex Bearing
Hex Bearing Assembly
Hex Auger Shaft
Flange (LS)
Flange (NLS)
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
10.5
.25
35.0
11.5
.13
.17
6.88
1.85
Replacement Par ts • Page 36
Sprockets, Rollers & Bearings for Ditch Witch®
Alligator Boom Using 3.067 Pitch Chain for
A/H500, A615, 510A
13
Ref No. 14 / Part No. B140-661
Bearing Kit for Item #13, Roller
(for individual breakdown of Bearing Kit Parts, see pg 41 Ref No.’s 7-13)
1
7
3
8
6
9
11
10
2
12
Ref No. Part No.
1
B 142-012
B 142-011
2
B 145-589
3
B 155-852
4
B 180-441
5
B 180-440
6
B 181-697
7
B 181-698
8
B 181-699
9
B 115-470
10
B 125-216
11
B 125-265
12
B 105-377
13
B 142-756
B 142-756A
14
B 140-661
4
Description
Idler Sprocket, Less Bearings – 19 Tooth, 20" O.D.
Idler Sprocket Assembly
Plastic Washer
External Seal (for ref. #1, Sprocket)
Shaft (43⁄8" Long)
Shaft (47⁄8" Long)
Bearing Spacer (for ref. #1, Sprocket)
Seal Spacer (for ref. #1, Sprocket)
Seal Sleeve (for ref. #1, Sprocket)
Snap Rings (for ref. #1, Sprocket)
Bearing Race (for ref. #1, Sprocket)
Bearing (for ref. #1, Sprocket)
Nut
Roller Only, 17"
Roller Assembly, 17”
Bearing Kit
5
Weight (lbs)
52
54
.08
.06
2.75
3
.05
.3
.3
.06
.63
1
.50
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 37
Chain,Teeth & Accessories for Ditch Witch® Models
R40, 4010, R60, R65, 5010, 5110, RT55, 6510, 7510,
RT75, 7610, 8020, RT95, RT115 & Attachments
A/H400, A/H500, H700 using 3" Pitch Chain
11
12
2
1
3
8
9
10
7
6
5
4
Ref No.
1
2
3
NS
4
5
6
N/S
N/S
N/S
7
8
9
10
11
11
11
12
12
12
Part No.
135-911
135-910
135-921
135-960
135-901
135-902
135-903
135-904
135-905
135-906
105-319
105-320
105-326
105-327
135-704
135-702
135-701
135-411
135-410
135-412
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Smart Pt. No.
B3067LD00B32
B3067LD00B08
B3067LD00B04
B3067HD00B32
B3067HD00B08
B3067HD00B04
Description
Cutter, L.H.
Cutter, R.H.
Spacer,Tooth 8" (3⁄8")
Spacer,Tooth (1⁄8") (70,000#)
Adapter 10" (136-071)
Adapter 12" (136-120)
Adapter 14" (136-088)
Adapter 16"
Adapter 18" (136-089)
Adapter 20"
Bolt (3⁄4" x 11⁄2")
Bolt (3⁄4" x 21⁄4")
Bolt (3⁄4" x 3")
Bolt (3⁄4" x 4")
Chain, 16' Less Teeth (70,000# Chain)
Chain 4' Less Teeth (70,000# Chain)
Chain 2' Less Teeth (70,000# Chain)
Chain 16' Less Teeth (110,000# Chain)
Chain 4' Less Teeth (110,000# Chain)
Chain 2' Less Teeth (110,000# Chain)
Weight (lbs)
2.25
2.25
.75
8.0
9.5
10.75
12
13.47
14.84
.25
.25
.25
.25
256
60
30
288
72
34
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 38
Chain,Teeth & Accessories for Ditch Witch® Models
R40, 4010, R60, R65, 5010, 5110, RT55, 6510, 7510,
RT75, 7610, 8020, RT95, RT115 & Attachments
A/H400, A/H500, H700, continued
25
16
15
14
13
22
17
21
20
24
19
23
18
Ref No.
13
14
15
16
17
18
19
20
21
22
23
24
25
Part No.
B 135-503
B3067LDCL
B 135-402
B 135-501 CP
B 105-372
B 501
B 502
B 135-404
B 135-401
3067HDCL
B 2109-911
B 2108-910
B 135-411-4
Smart Pt. No.
B30670400B16
Description
Roller Link (70,000#)
Conn. Link (70,000#)
Lock Key
Chain Pin (70,000#)
Lock Nut (3⁄4")
Ground Breaker, L.H.
Ground Breaker, R.H.
Roller Link (110,000#)
Chain Pin (110,000#)
Conn. Link (110,000#)
Super Tooth, L.H.
Super Tooth, R.H.
Chain 16' Every 4th Pitch (110,000# Chain)
Weight (lbs)
2.85
.03
.4
.10
1.3
1.3
3.40
3.4
3.5
3.5
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 39
3.067" Pitch Anti-Back Flex Chain for Ditch
Witch® Models R60, R65, 5010, 5110, RT55, 6510,
7510, RT75, 7610, 8020, RT95, RT115, &
Attachments A/H400, A/H500, H700
11
12
3
15
2
9
8
10
1
7
4
13
6
5
14
16
20
18
19
17
Ref No.
1
2
3
4
5
6
N/S
N/S
N/S
7
8
9
10
11
11
11
12
13
14
15
N/S
N/S
N/S
N/S
N/S
16
17
18
19
20
Part No.
B 135-911
B 135-910
B 135-921
B 135-901
B 135-902
B 135-903
B 135-904
B 135-905
B 135-906
B 105-319
B 105-320
B 105-326
B 105-327
B 137-411
B 137-410
B 137-412
B 137-401
B 137-404
B 137-405
B 137-402
B 135-961
B 135-962
B 135-979
B 135-977
B 140-120
B 105-372
B 501
B 502
B 2109-911
B 2108-910
Smart Pt. No.
B3067ABF00B32
B3067ABF00B08
B3067ABF00B04
Description
Cutter, L.H.
Cutter, R.H.
Spacer,Tooth 8" (3⁄8")
Adapter 10" (136-071)
Adapter 12" (136-120)
Adapter 14" (136-088)
Adapter 16"
Adapter 18" (136-089)
Adapter 20"
Bolt (3⁄4" x 11⁄2")
Bolt (3⁄4" x 21⁄4")
Bolt (3⁄4" x 3")
Bolt (3⁄4" x 4")
ABF Chain 16' Less Teeth
ABF Chain 4' Less Teeth
ABF Chain 2' Less Teeth
Chain Pin
Roller Link
Connecting Link
Key
Chain Spacer – .8"
Chain Spacer – 1.9"
Chain Spacer – 2.16"
Chain Spacer – 2.34"
Boom Gussets
Lock Nut (3⁄4")
Ground Breaker, L.H.
Ground Breaker, R.H.
Super Tooth, L.H.
Super Tooth, R.H.
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
2.14
2.14
.75
8
9.3
10.75
12
13.47
14.84
.25
.25
.45
.6
269
67.2
33.6
.5
4.25
51
.05
.10
1.3
1.3
3.5
3.5
Replacement Par ts • Page 40
Boom Parts, Sprockets, Bearings, and Accessories
for Ditch Witch® Models R40, R60, R65, 4010, 5010,
6510, 7510, 7610, 8020 & Attachments A/H400,
A/H500, H700
3
1
2
4
7
9
6
8
19
23
13
10
12
14
18
17
5
11
20
22
21
24
16
15
Ref No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
*
N/S
Part No.
B 140-013
B 140-021
B 140-758
B 180-440
B 105-377
B 140-723
B 140-656
B 180-244
B 180-243
B 180-026
B 155-843
B 125-265
B 125-266
B 115-470
B 180-441
B 150-191
B 150-340
B 150-058
B 155-711
B 155-712
B 115-001
B 105-367
B 105-419
B 140-730
B 140-731A
B 142-756
B 142-756A
B 140-661
B 140-120
Description
Weight (lbs)
Boom Sleeve
.5
Boom Spring
.80
Slide & Stop
25.60
Idler Shaft (Slide & Stop)
3
Nut
.50
Idler Sprocket (Bearing Kit for Idler Sprocket: see * below) 26.50
Idler Sprocket Assy, (Includes Sprocket & #’s 7-13)
24.75
Spacer Bearing
.10
Spacer Bearing
.31
Fiber Spacer
.10
Seal
.15
Bearing
1
Race
.6
Retaining Ring
.01
Idler Shaft (Boom – Idler)
2.75
Grease Cylinder Barrel
3.50
Grease Cylinder Rod
5.10
Grease Cylinder Assembly
11
O Ring
.03
Back-up Ring
.1
1
Zerk ( ⁄8")
.06
Lock Nut (1" NC)
.25
Bolt (1" NC X 4")
1.13
Idler Sprocket (2" P)
Idler Sprocket Assembly (14T) (140-659)
17" End Roller
17" End Roller Assembly
Bearing Kit (includes Reference #’s 7-13)
Boom Gussets
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 41
Auger Parts & Accessories for Ditch Witch®
Models R40, R60, R65, 4010, 5010, 6510, 7510,
8020 & Attachments A/H400, A/H500, H700 (3" P)
1
2
5
10
9
4
3
7
8
6
11
12
13
16
14
15
20
19
17
21
18
Ref No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Part No.
B 145-070
B 145-071
B 145-109
B 145-110
B 105-407
B 105-357
B 115-001
B 125-517
B 105-466
B 105-372
B 105-384
B 140-725
B 142-008
B 165-368
B 145-244
B 140-665
B 110-363
B 110-364
B 125-620
B 125-048
B 145-248
Description
Auger, R.H. (24")
Auger, L.H. (24")
Auger, R.H. (12")
Auger, L.H. (12")
Bolt, (5⁄8" x 4")
Lock Nut (5⁄8")
Zerk
Pillow Block Bearing, 13⁄4" I.D.
Bolt (3⁄4" x 2 1/2")
Lock Nut (3⁄4")
Washer (3⁄4")
Auger Sprocket & Shaft
Auger Sprocket
Auger Shaft
Hex Auger Shaft
Auger Sprocket, Hex
Flange (LS)
Flange (NLS)
Hex Bearing Assembly
Hex Bearing
Hex Sprocket Hub
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
53
53
28
28
.50
.06
.06
10.5
.5
.06
.06
35.0
23.9
15
Replacement Par ts • Page 42
Drive Sprocket Head Shaft, Components for Ditch
Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510,
7610, 8020 & Attachments A/H400, A/H500, H700
4
2
5
1
6
3
12
7
13
10
17
11
8
14
9
15
16
18
21
19
20
Ref No.
1
2
3
4
5
6
7
8
9
10
N/S
11
N/S
N/S
12
13
14
15
16
17
18
19
20
21
Part No.
B 180-055
B 140-717
B 105-302
B 180-057
B 155-703
B 145-475
B 155-805
B 125-259
B 125-258
B 180-071
B 145-476
B 105-384
B 105-364
B 180-064
B 165-329
B 165-903
B 165-904
B 165-905
B 165-907
B 175-604
B 115-003
B 105-313
B 180-062
B 141-589
Description
Sprocket Hub
Split Sprocket
Bolt 5⁄8" x 2"
Spacer Seal
O Ring
Washer
Seal
Bearings
Race
Backup Ring
Washer
3⁄4" Washer
Bolt 3⁄4" X 2"
Washer 13⁄16" I.D. x 3" O.D. x 1⁄2"
Drive Shaft
Key (5⁄8" Sq. x 43⁄8" Lg.)
Key (5⁄8" Sq. x 37⁄8" Lg.)
Key (3⁄4" X 5⁄8" x 31⁄4")
Key (5⁄8" R2 x 3⁄8")
Sprocket (100 Q 32)
Zerk (1⁄4 N.F. Str.)
Nut
Dirt Shield
Sprocket Split Drive 11 Tooth
RT75, RT95, RT115 (Attachments: H910, H911, M910)
Weight (lbs)
3.5
15
.25
2.0
.06
.03
.25
1.5
1
.13
.20
.06
.25
.62
38
.25
.25
.25
.10
26.5
.03
.19
.19
continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 43
Drive Sprocket Head Shaft, Components for Ditch
Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510,
7610, 8020 & Attachments A/H400, A/H500, H700,
continued
22
21
24
23
25
26
Ref No.
21
22
N/S
N/S
N/S
N/S
23
24
N/S
25
N/S
26
Part No.
125-209
175-605
175-608
130-404
130-402
130-401
170-038
170-059
170-609
142-009
175-509
165-379
B
B
B
B
B
B
B
B
B
B
B
B
Description
Bearing Assembly
Sprocket (100-B14)
Sprocket Assembly
Chain (100-65 Pitches)
Offset Link
Connector Link
Power Band V Belts — 2 Belts
Power Band V Belts — 4 Belts
Sprocket #100 Q 34
Sprocket (1 Piece)
Idler Sprocket #80 – 16 Tooth
Drive Shaft for offset machine
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
1
4.75
6
20
.35
.25
1.85
1.96
28
16
Replacement Par ts • Page 44
Ultra Heavy-Duty Trench-ALL® 3110 Digging
Chain & Accessories (165,000# Test Chain)
Replaces 3.067" Pitch Chain
1
3
2
4
5
6
11
8
7
10
9
Ref No.
1
2
3
4
5
6
7
8
9
10
11
Part No.
Smart Pt. No.
TA 3110
TA 3110
TA 3110
TA 3110
TA 3110
TA 3110
TA 4134
TA 4134
TA 4134
TA 4134
SP 200
TA311000B_ _
PC
CT
RL
RPL
CL
L
R
LPL
LPR
Description
Bare Chain
Chain Pin w/Cotter
Cotter Only
Roller Link
Repair Link
Conn. Link
Cup Cutter, L.H.
Cup Cutter, R.H.
Cup Cutter L.H. (Low Profile)
Cup Cutter R.H. (Low Profile)
2" Alloy Tube Spacer
Weight (lbs)
Note: No sprocket conversion required.
continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 45
Ultra Heavy-Duty Trench-ALL® 3110 Digging
Chain & Accessories (165,000# Test Chain)
Replaces 3.067" Pitch Chain, continued
14
12
20
19
13
15
18
17
16
22
23
24
21
Ref No.
12
13
14
15
16
17
18
19
20
21
22
23
24
Part No.
SP 238
SP 218
34 FW
34 LW
34 LN
34412-8
34500-8
34512-8
34600-8
PL 4134-12
PL 4134-14
PL 4134-16
BL 3110-10
Smart Pt. No.
Description
23⁄8" Alloy Tube Spacer
21⁄8" Alloy Tube Spacer
3⁄4" Flat Washer
3⁄4" Lock Washer
3⁄4" Lock Nut
3⁄4" x 41⁄2" Gr. 8 Bolt
3⁄4" x 5" Gr. 8 Bolt
3⁄4" x 51⁄2" Gr. 8 Bolt
3⁄4" x 6" Gr. 8 Bolt
12" Cup Cutter Expander
14" Cup Cutter Expander
16" Cup Cutter Expander
Block Spacer – Space for 2" Additional Cut
Ballantine, Inc. • Ditch Witch
®
Weight (lbs)
Replacement Par ts • Page 46
Chains for Ditch Witch® Models
R100, AR12, RT115
(Largest Riding Trenchers)
1
2
Ref No.
1
1
2
2
Part No.
B 135-812
B 135-808
N/A
N/A
Smart Pt. No.
B450000B24
B450000B06
TA408600B26
TA408600B07
Description
150,000 Lb. Chain, Bare, 18', 48 pitches, (2P)
150,000 Lb. Chain, Bare, 4.5'’, 12 pitches, (2P)
225,000 Lb. Chain, Bare, 18', 52 pitches, (2P)
225,000 Lb. Chain, Bare, 4.5', 14 pitches, (2P)
Weight (lbs)
360
90
Note: The Trench-All® Chain lines are specifically engineered for today’s higher horsepower
trenchers and their roller style booms.
All Trench-All® Chains are extra heavy duty anti back-flex chains with raised rivet design.
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 47
Chain,Teeth & Adapters (4.5" Pitch, 150,000#
Test Chain) for Ditch Witch® Model R100, AR12
1
6
2
8
7
4
3
5
10
9
12
11
13
16
14
Ref No.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Part No.
B 135-812
B 135-808
B 105-372
B 105-383
B 105-464
B 105-473
B 135-801
B 135-802
B 135-805
R100CL
B 136-009
B 136-045
B 136-046
B 136-064
B 136-010
B 136-012
B 136-014
15
Smart Pt. No.
B450000B24
B450000B06
Description
Weight (lbs)
18' Chain, Bare
360
4' 6" Chain, Bare
90
Locknut (3⁄4")
.10
Bolt (3⁄4" x 6")
.81
Bolt (3⁄4" x 7")
1.00
Bolt (3⁄4" x 5")
.75
Chain Pin
.6
Lock Key
.05
Roller Link
5.5
Conn. Link
Tooth Spacer (2 pcs. = 10" Width • 4 pcs. - 12" Width)
2.29
Cutter, L.H.
6.5
Cutter, R.H.
6.5
Chain Spacer
.3
14" - 16" Adapter
18" - 20" Adapter
22" - 24" Adapter
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 48
Boom Sprockets, Auger Sprockets, and Drive
Sprockets and Accessories for Ditch Witch®
Model R100, AR12
3
2
1
4
5
7
6
9
8
11
12
10
15
13
Ref No.
1
N/S
2
3
4
5
6
7
8
9
10
11
N/S
12
N/S
13
14
15
N/S
N/S
N/S
14
Part No.
Description
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Idler Sprocket
Idler Sprocket Assembly
Snap Ring
Snap Ring
Bearing
Races
Urethane Spacer
Seals
Seal Ring
Idler Shaft
Nut
Split Drive Sprocket (4.5"P Chain)
Split Drive Sprocket (3"P Chain)
Auger Sprocket & Shaft (4.5"P Chain)
Auger Sprocket & Shaft (3"P Chain)
Pillow Block Bearing (21⁄4" I.D.)
Bolt (5⁄8" X 3")
Locknut (5⁄8")
Chain #100-2 96P (used with Auger Setup)
Chain #100-2 120P (used with Conveyor Setup)
Belt Set of 4
142-001
140-658
115-498
115-492
125-287
125-288
145-475
155-870
180-165
183-064
105-377
140-739
140-747
140-742
140-749
125-514
105-376
105-357
130-412
130-413
170-052
Weight (lbs)
71.5
84
.05
.06
2.50
1.19
.03
.25
.5
4.50
.50
63
102
14.5
.25
.06
6
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 49
Ultra Heavy-Duty Trench-ALL® 4086 Digging
Chain & Accessories (225,000# Test Chain)
Replaces 41⁄2" Pitch – 150,000# Test Chain
1
3
2
4
5
9
11
12
10
Ref No.
1
2
3
4
5
6
7
8
9
10
11
12
13
8
7
6
Part No.
Smart Pt. No.
Description
TA 4086
TA 4086 RL
TA 4086 RPL
TA 4086 PC
TA 4134 L
TA 4134 R
B 136-045
B 136-046
SP 2116
SP 2716
SP 238
SP 11516
34 FW
TA408600B_ _
Bare Chain
Roller Link
Repair Link
Chain Pin with keeper
Cutter L.H.
Cutter R.H.
Cutter, L.H.
Cutter, R.H.
21⁄16” Alloy Tube Spacer
27⁄16” Alloy Tube Spacer
23/8” Alloy Tube Spacer
115⁄16” Alloy Tube Spacer
3⁄4” Flat Washer
13
Weight (lbs)
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 50
Ultra Heavy-Duty Trench-ALL® 4086 Digging Chain
& Accessories (225,000# Test Chain) Replaces 41⁄2"
Pitch – 150,000# Test Chain, continued
18
19
14
16
17
15
20
21
22
Ref No.
14
15
16
17
18
19
N/S
20
21
22
23
N/S
N/S
N/S
N/S
Part No.
34 LW
34 LN
34412-8
34500-8
34512-8
34600-8
34 HCCBS
H 180 L
H 180 R
H 290 L
H 290 R
H 345 L
H 345 R
H 400 L
H 400 R
23
Description
Lock Washer
3⁄4” Lock Nut
3⁄4” x 4 1⁄2" Gr. 8 Bolt
3⁄4” x 5" Gr. 8 Bolt
3⁄4” x 51⁄2" Gr. 8 Bolt
3⁄4” x 6" Gr. 8 Bolt
3⁄4” Bolt Seat for 100MM Cup Cutter
10" Cutter, L.H.
10" Cutter, R.H.
12" Cutter, L.H.
12" Cutter, R.H.
14" Cutter, L.H.
14" Cutter, R.H.
16" Cutter, L.H.
16" Cutter, R.H.
Weight (lbs)
3⁄4”
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 51
Ultra Heavy-Duty Trench-ALL® 4086 Digging
Chain & Accessories (225,000# Test Chain) Replaces
41⁄2" Pitch – 150,000# Test Chain, continued
25
24
26
27
28
30
29
Ref No.
24
25
26
N/S
27
28
N/S
29
30
Part No.
Description
PL 4115-12
PL 4115-14
PL 4115-16
PL 4115-18
TSDW 40161D
TSDW 40162I
TSDW 40162IA
TSDW 40163A
BL 4086-10
12” Cup Cutter Expander Plate
14” Cup Cutter Expander Plate
16” Cup Cutter Expander Plate
18” Cup Cutter Expander Plate
Drive Sprocket (Split)
Idler Sprocket
Idler Sprocket Assembly
Auger Sprocket and Shaft
Block Spacer - 2” Additional Cut
Weight (lbs)
Note: Sprocket conversion required
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 52
Rock & Frost Section
1
4
3
2
11
7
6
5
12
8
13
9
14
10
Ref No.
1
2
3
4
5
6
7
8
9
N/S
10
N/S
11
12
13
N/S
N/S
N/S
14
Note:
Part No.
Description
B56KRB
B43KRB
B56-B
B43-B
B56-C
B43-C
CB43-10
CB56-10
Puller
Puller
N/A
N/A
B43LH
B43LRB
B43LW
C31HD
C31
.990 CRF
B 43 CW
Carbide Tooth, Rockbuster (.765 HB)
Carbide Tooth, Rockbuster (.735 HB)
Carbide Tooth, Full Cap (.765 CB)
Carbide Tooth, Full Cap (.735 CB)
Carbide Tooth, Half Cap (.765 MB)
Carbide Tooth, Half Cap (.735 MB)
Tooth Pockets (.735 BLK)
Tooth Pockets (.765 BLK)
Tooth Puller (Standard)
Tooth Puller (Large)
Chain Installer, Small (1.654" through 2")
Chain Installer, Large (3" through 4")
Carbide Tooth 1/2 Cap w/clip (.735 MRW)
Carbide Tooth Rockbuster w/Clip (.735 HR)
Lock Washers (K 91)
Carbide Tooth, Rockbuster (.990 HB)
Carbide Tooth, Half Cap (.990 MB)
Carbide Tooth, Full Cap with Flared Shoulder
Clip Wrench
Weight (lbs)
We have all styles and sizes of Carbide Bits
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 53
Terminator®, Alligator and Bolt-on
Rock & Frost Chain,Teeth & Adapters for
Ditch Witch® Walk Along Models Using
1.654" Pitch Chain & Accessories
3
4
1
5
2
14
13
15
12
7
16
26
11
10
9
8
6
17
18
25
23
21
20
19
24
22
27
28
Ref No.
Part No.
Smart Pt. No.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
N/A
N/A
B 135-316
B 135-317
B 135-318
B17
B17-D
B17-10
T165404C
T165404L
T165404R
TT1654
B 135-319
B 135-320
B 135-936
B 135-937
B 135-938
B 136-027
B 136-029
B 105-162
B 105-915
B 105-916
B 105-917
38LW
B 105-047
B 105-101
B 059-360
B 135-001
SH16540426
AL16540426
1.654”P Welded Terminator Chain, 4” Cut, 26 Stations
1.654”P Welded Alligator Chain, 4” Cut, 26 Stations
Bit Adapter Center
Bit Adapter L.H.
Bit Adapter R.H.
Carbide Bit
Lockwasher
Tooth Holder
Terminator Adapter, Center
Terminator Adapter, L.H.
Terminator Adapter, R.H.
Terminator Tooth Only
Tubular Spacer (Used with Bit Adapter on Inside)
Tubular Spacer (Used with Bit Adapter on Outside)
Flat Spacer (3⁄8") (28,000 Lb. - Chain Only)
5" Flat Spacer (28,000 Lb. Chain Only)
6" Flat Spacer (28,000 Lb. Chain Only)
5" Flat Spacer (34,000 & 38,000 Lb. Chain)
6" Flat Spacer (34,000 & 38,000 Lb. Chain)
Bolt 3⁄8" x 21⁄4" Used with Bit Adapter on Inside
Bolt 3⁄8" x 23⁄4" Used with Bit Adapter on Outside
Bolt 3⁄8" x 41⁄2" Used with Spacer for 5" Cut
Bolt 3⁄8" x 51⁄2" Used with Spacer for 6" Cut
Lock Washer 3⁄8"
Locknut 3⁄8"
Flat Washer 3⁄8"
Half Link with Connecting Pin (28,000 Lb. Chain Only)
Connector Pin with Keeper (All Chains)
Note:
Weight (lbs)
.5
.5
.5
.2
.02
.75
.75
.75
.3
For additional bare chain components, see walk-along section.
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 54
Terminator®, Alligator and Bolt-on Rock & Frost
Chain,Teeth & Adapters (2" Pitch, 50,000 Lb.Test
Chain) for Ditch Witch® Models V30, R30, 2300, 2200,
2310, R40, J20, 3500, 3610, 3700, R40, 4500, 4010
1
2
3
4
6
5
11
7
9
8
10
13
Ref No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
12
14
15
Part No.
Smart Pt. No.
Description
N/A
N/A
T 20034
T 20078
765 BLK
765 HDBLK
B 105-065
B 105-076
B 105-110
B 105-111
B 135-952
B 135-043
B 135-958
B 135-959
B 135-058
SH20000636
AL200006D36
2” P Welded Terminator Chain, 6” Cut, 36 Stations
2” P Welded Alligator Chain, 6” Cut, 36 Stations
Terminator Tooth, 3⁄4”V-Carbide
Terminator Tooth, 7/8”V-Carbide
Tooth Holder
Heavy-Duty Tooth Holder
1⁄2" Locknut
(1⁄2" x 3") Bolt
(1⁄2" x 41⁄2") Bolt
(1⁄2" x 4") Bolt
Chain Spacer (Used with Bit Adapter on Outside)
Chain Spacer (Used with Bit Adapter on Inside)
Carbide Bit Half Cap (B56-C) (765 MB)
Carbide Bit Full Cap (B56-B) (765 CB)
Carbide Rockbuster (CB56KRB) (765 HB)
Weight (lbs)
.8
.85
.8
1.0
.5
.5
.5
continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 55
Terminator®, Alligator and Bolt-on Rock & Frost Chain,
Teeth & Adapters (2" Pitch, 50,000 Lb.Test Chain) for
Ditch Witch® Models V30, R30, 2300, 2200, 2310, R40,
J20, 3500, 3610, 3700, R40, 4500, 4010, continued
17
18
19
16
20
21
24
23
22
25
26
27
Ref No.
Part No.
16
17
18
19
20
21
22
23
24
25
26
27
N/S
N/S
B 136-036
B 136-037
B 136-038
B 136-039
B 136-041
B 136-040
T 20004L
T 20004R
T 20005L
T 20005R
T 20006L
T 20006R
T 20008L
T 20008R
Note:
Smart Pt. No.
Description
Weight (lbs)
Bit Adapter (Less Bit) R.H. Center - Through 4"
Bit Adapter (Less Bit) L.H. Center - Through 4"
Bit Adapter (Less Bit) L.H. 5"
Bit Adapter (Less Bit) R.H. 5"
Bit Adapter (Less Bit) L.H. 6"
Bit Adapter (Less Bit) R.H. 6"
Terminator Adapter, L.H. C-4”
Terminator Adapter, R.H. C-4”
Terminator Adapter, L.H. 5”
Terminator Adapter, R.H. 5”
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
For additional bare chain components, see 2” pitch chain section.
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 56
Terminator®, Alligator and Bolt-on Rock & Frost
2" Pitch Anti-Back Flex Chain,Teeth & Adapters for
Ditch Witch® Models V30, R30, 2300, 2310, R40, 4010,
5010, 3500, 2200, 3610, 3700, 4500
1
2
4
3
13
14
15
6
5
11
Ref No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
9
7
8
10
12
Part No.
Smart Pt. No.
Description
N/A
N/A
T 20034
T 20078
765 BLK
765 HDBLK
B 105-065
B 105-076
B 105-110
B 105-111
B 135-952
B 135-043
B 135-958
B 135-959
B 135-058
SH20000636
AL200006D36
2” P Welded Terminator Chain, 6” Cut, 36 Stations
2” P Welded Alligator Chain, 6” Cut, 36 Stations
Terminator Tooth, 3⁄4”V-Carbide
Terminator Tooth, 7/8”V-Carbide
Tooth Holder
Heavy-Duty Tooth Holder
1⁄2" Locknut
(1⁄2" x 3") Bolt
(1⁄2" x 41⁄2") Bolt
(1⁄2" x 4") Bolt
Chain Spacer (Used with Bit Adapter on Outside)
Chain Spacer (Used with Bit Adapter on Inside)
Carbide Bit Half Cap (B56-C) (765 MB)
Carbide Bit Full Cap (B56-B) (765 CB)
Carbide Rockbuster (CB56KRB) (765 HB)
Weight (lbs)
.8
.85
.8
1.0
.5
.5
.5
continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 57
Terminator®, Alligator and Bolt-on Rock & Frost 2"
Pitch Anti-Back Flex Chain,Teeth & Adapters for
Ditch Witch® Models V30, R30, 2300, 2310, R40, 4010,
5010, 3500, 2200, 3610, 3700, 4500, continued
16
17
18
21
20
22
24
Note:
Part No.
B 136-036
B 136-037
B 136-038
B 136-039
B 136-040
B 136-041
T 20004L
T 20004R
T 20005L
T 20005R
T 20006L
T 20006R
T 20008L
T 20008R
23
26
25
Ref No.
16
17
18
19
20
21
22
23
24
25
26
27
N/S
N/S
19
27
Description
Bit Adapter (Less Bit) R.H. Center - Through 4"
Bit Adapter (Less Bit) L.H. Center - Through 4"
Bit Adapter (Less Bit) L.H. 5"
Bit Adapter (Less Bit) R.H. 5"
Bit Adapter (Less Bit) R.H. 6"
Bit Adapter (Less Bit) L.H. 6"
Terminator Adapter, L.H. C-4”
Terminator Adapter, R.H. C-4”
Terminator Adapter, L.H. 5”
Terminator Adapter, R.H. 5”
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”
Weight (lbs)
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
2.3
For additional bare chain components, see 2” pitch ABF chain section.
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 58
Terminator®, Alligator and Bolt-on Rock & Frost
Chain,Teeth & Adapters for Ditch Witch® Models
R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020
Using 3.067"P Chain
1
2
7
3
4
11
5
Ref No.
1
2
3
4
5
6
7
8
9
10
11
12
13
8
10
6
12
13
9
Part No.
Smart Pt. No.
Description
N/A
N/A
T 20034
T 20078
765 BLK
765 HDBLK
B 105-322
B 105-365
B 105-372
B 105-111
B 135-958
B 135-959
B 135-058
SH3067HD0632
AL30670632
3”P, 110,000 Lb. Welded Terminator Chain, 6” Cut, 32 Sta.
3”P, 110,000 Lb. Welded Alligator Chain, 6” Cut, 32 Sta.
Terminator Tooth, 3⁄4" V-Carbide
Terminator Tooth, 7⁄8" V-Carbide
Tooth Holder
Heavy Duty Tooth Holder
Bolt (3⁄4" x 51⁄2")
Bolt (3⁄4" x 4")
Locknut (3⁄4")
Bolt (3⁄4" x 41⁄2")
Carbide Bit Half Cap (B56-C) (765 MB)
Carbide Bit Full Cap (B56-B) (765 CB)
Carbide Bit Rockbuster (CB56KRB) (765 HB)
Weight (lbs)
.8
.85
.8
1.
continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 59
Terminator®, Alligator and Bolt-on Rock & Frost
Chain,Teeth & Adapters for Ditch Witch® Models
R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020
Using 3.067"P Chain, continued
15
14
16
17
20
18
21
19
22
Ref No.
14
15
16
17
18
19
20
21
22
23
24
N/S
N/S
Note:
23
24
Part No.
Description
B 135-973
B 135-974
B 135-975
B 135-976
T 306706L
T 306706R
T 306708L
T 306708R
B 105-373
B 135-977
B 135-978
B 135-979
B 135-980
Bit Adapter (Less Teeth) L.H. 8" Cut
Bit Adapter (Less Teeth) R.H. 8" Cut
Bit Adapter (Less Teeth) R.H. cc - 6"
Bit Adapter (Less Teeth) L.H. cc - 6"
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”
Bolt ( 3⁄4" x 5")
Chain Spacer, Outside (110,000 Lb.)
Chain Spacer, Inside (110,000 Lb.)
Chain Spacer, Outside (70,000 Lb.)
Chain Spacer, Inside (70,000 Lb.)
Weight (lbs)
For additional bare chain components, see pages 42 and 43.
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 60
Terminator®, Alligator and Bolt-on Rock & Frost
3.067" Pitch Anti-Back Flex Chain,Teeth & Adapters
for Ditch Witch® Models R60, R65, R6510, R40, 4010,
5010, 7510, 7610, 8020 & Attachments A/H500, A/H700
8
7
10
1
9
3
2
11
6
13
12
18
5
4
19
15
14
23
20
22
16
Ref No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Note:
21
17
Part No.
Smart Pt. No.
N/A
N/A
T 20034
T 20078
765 BLK
765 HDBLK
B 105-322
B 105-365
B 105-372
B 105-373
B 135-958
B 135-959
B 135-058
B 135-973
B 135-974
B 135-975
B 135-976
T 306706L
T 306706R
T 306708L
T 306708R
B 135-977
B 135-978
SH3067ABF06D32 ABF, 110,000# Welded Terminator, 6” Cut, 32 Stations
AL3067ABF06D32 ABF, 110,000# Welded Alligator, 6” Cut, 32 Stations
Terminator Tooth, 3⁄4" V-Carbide
Terminator Tooth, 7⁄8" V-Carbide
Tooth Holder
Heavy Duty Tooth Holder
Bolt (3⁄4" x 51⁄2") Used with Two Outside Bit Adapters
Bolt (3⁄4" x 4") Used with Inside Bit Adapter
Locknut (3⁄4")
Bolt (3⁄4" x 5") Used with Outside Bit Adapter
Carbide Bit Half Cap (B56-C) (765 MB)
Carbide Bit Full Cap (B56-B) (765 CB)
Carbide Rockbuster (CB56KRB) (765 HB)
Bit Adapter L.H. 8"
Bit Adapter R.H. 8"
Bit Adapter R.H. Center through 6" Cut
Bit Adapter L.H. Center through 6" Cut
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”
Chain Spacer (Used with Bit Adapter on Outside)
Chain Spacer (Used with Bit Adapter on Inside)
Description
Weight (lbs)
.8
.85
.8
1.
For additional bare chain components, see page 44.
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 61
H-Plate,Terminator®, and Bolt-on Rock & Frost
Chain,Teeth and Adapters for TA3110 Ultra
Heavy-Duty Chain (165,000# Test Chain)
Replaces all 3"P Chains
3
5
6
1
4
7
9
2
8
11
10
14
16
17
15
18
12
13
Ref No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Note:
Part No.
N/A
N/A
B 43 LH
B 43 LC
B 43 LRB
765 CRFN
B 43 CW
TA 4134 LPL
TA 4134 LPR
H 75-6L
H 75-6R
H 75-8L
H 75-8R
T 20034
T 20078
T 306706L
T 306706R
T 306708L
T 306708R
Smart Pt. No.
Description
TA311006H32
SH31100632
Welded H-Plate Chain, 6” Cut, 32 Stations
Welded Terminator Chain, 6” Cut, 32 Stations
Carbide Tooth with clip (735MRW)
Lock Clip Only (K91)
Rockbuster Bit with clip
Full Cap Carbide Bit with clip
Clip Wrench
Cutter, L.H., Low-profile
Cutter, R.H., Low-profile
Carbide Holder, L.H. 6”
Carbide Holder, R.H. 6”
Carbide Holder, L.H. 8”
Carbide Holder, R.H. 8”
Terminator Tooth, 3⁄4" V-Carbide
Terminator Tooth, 7⁄8" V-Carbide
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”
19
Weight (lbs)
.8
.85
For additional bare chain components, see page 49.
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 62
H-Plate,Terminator®, and Bolt-on Rock & Frost
Chain,Teeth and Adapters for TA3110 Ultra
Heavy-Duty Chain (165,000# Test Chain)
Replaces all 3"P Chains, continued
21
20
32
22
31
30
29
24
23
25
27
26
33
34
Ref No.
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Part No.
TP 17
SP 1916
SP 178
SP 200
SP 238
SP 218
34 FW
34 LW
34 LN
34412-8
34500-8
34512-8
34600-8
PL 75-10
PL 75-12
PL 75-14
PL 75-16
BL 3110-10
37
28
35
Description
Heat Treated Tooth Pocket
19⁄16" Alloy Tube Spacer
17⁄8" Alloy Tube Spacer
2” Alloy Tube Spacer
23⁄8" Alloy Tube Spacer
21⁄8" Alloy Tube Spacer
3⁄4" Flat Washer
3⁄4" Lock Washer
3⁄4" Lock Nut
3⁄4" x 41⁄2" Gr. 8 Bolt
3⁄4" x 5” Gr. 8 Bolt
3⁄4" x 51⁄2" Gr. 8 Bolt
3⁄4" x 6” Gr. 8 Bolt
10” Carbide Expander
12” Carbide Expander
14” Carbide Expander
16” Carbide Expander
Block Spacer - Space for 2” Additional Cut
36
Weight (lbs)
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 63
Alligator and Bolt-on Rock & Frost
Chain,Teeth & Adapters (41⁄2" Pitch
150,000# Test Chain) for Ditch Witch®
Models R100, AR12, R150
1
2
5
8
6
9
4
3
10
12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
11
13
Ref No.
7
17
16
15
14
Part No.
Smart Pt. No.
Description
N/A
B 135-812
B 105-372
B 105-499
B 135-801
B 135-802
B 135-805
R 100CL
B 136-100
B 136-101
B 136-102
B 136-060
B 136-061
B 136-062
B 136-063
765 BLK
765 HDBLK
AL450008D24
B450000B24
Welded Alligator Chain, 8” Cut, 24 Stations
18'0" Chain, Bare
Locknut (3⁄4" N.C.)
Bolt (3⁄4" x 13⁄4")
Chain Pin
Key
Roller Link
Conn. Link
Carbide Bit (Full Cap) (765 CB)
Carbide Bit (Half Cap) (765 MB)
Carbide Bit (Rock Buster) (765 HB)
Bit Adapter (Position 1)
Bit Adapter (Position 2)
Bit Adapter (Position 3)
Bit Adapter (Position 4)
Tooth Holder
Heavy Duty Tooth Holder
Weight (lbs)
360
.8
1.0
Note: MTO adapters can be manufactured upon request.
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 64
H-Plate,Terminator® and Bolt-on Rock & Frost
Chain,Teeth and Adapters for Ditch Witch®
Models R100, AR12, R150 using TA4086 Chain
(225,000# Test) replaces 4.5" 150,000 Chains
1
2
11
10
9
3
4
5
Smart Pt. No.
TA408608H26
TA408600B26
6
8
7
Ref No.
1
2
3
4
5
6
7
8
9
10
11
N/S
N/S
N/S
N/S
N/S
Part No.
N/A
N/A
B 43 LH
B 43 LRB
765 CRFN
B 43 LC
B 43 CW
TP 17
PL 75-12
PL 75-14
PL 75-16
PL 75-18
H 300-10L
H 300-10R
H 300-12L
H 300-12R
Description
4.086”P Welded H-Plate Chain, 8” Cut, 26 Stations
4.086”P Chain, Bare, 26 Stations
Carbide Tooth with clip (735 MRW)
Carbide Tooth with clip (735 HR)
Carbide Tooth with clip (Full Cap)
Lock Clip Only (K91)
Clip Wrench
Heat Treated Tooth Pocket
12" Carbide Expander Plate
14" Carbide Expander Plate
16" Carbide Expander Plate
18” Carbide Expander Plate
Carbide Holder 10" Cut, L.H.
Carbide Holder 10" Cut, R.H.
Carbide Holder 12" Cut, L.H.
Carbide Holder 12" Cut, R.H.
Note:
For additional bare chain components, see pages 54 & 55.
Weight (lbs)
continued on next page
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 65
H-Plate,Terminator® and Bolt-on Rock & Frost
Chain,Teeth and Adapters for Ditch Witch® Models
R100, AR12, R150 using TA4086 Chain (225,000#
Test) replaces 4.5" 150,000 Chains, continued
13
15
14
12
16
17
21
19
18
20
23
22
25
Ref No.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
H 75-6L
H 75-6R
H 75-8L
H 75-8R
SP 2716
SP 238
SP 11516
SP 2116
BL 4086-10
T 306706L
T 306706R
T 306708L
T 306708R
T 20034
T 20078
24
26
Description
Weight (lbs)
Carbide Holder, L.H. 6”
Carbide Holder, R.H. 6”
Carbide Holder, L.H. 8”
Carbide Holder, R.H. 8”
27⁄16” Alloy Tube Spacer
23⁄8” Alloy Tube Spacer
115⁄16” Alloy Tube Spacer
21⁄16” Alloy Tube Spacer
Block Spacer – Spacer for 2" Additional Cut
Terminator Adapter, L.H. 6”
Terminator Adapter, R.H. 6”
Terminator Adapter, L.H. 8”
Terminator Adapter, R.H. 8”
Terminator Tooth, 3⁄4" V-Carbide
Terminator Tooth, 7⁄8" V-Carbide
.8
.85
continued on next page
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 66
H-Plate,Terminator® and Bolt-on Rock & Frost
Chain,Teeth and Adapters for Ditch Witch® Models
R100, AR12, R150 using TA4086 Chain (225,000#
Test) replaces 4.5" 150,000 Chains, continued
28
27
29
31
30
35
34
33
32
37
36
Ref No.
27
28
29
30
31
32
33
34
35
N/S
36
37
38
N/S
N/S
Part No.
B 83 LH
B 83 LC
34 FW
34 LW
34 LN
34412-8
34500-8
34512-8
34600-8
34 TABS
PL 300-16
PL 300-18
PL 300-20
PL 300-22
PL 300-24
Description
Carbide Tooth with clip
Lock Clip
3⁄4” Flat Washer
3⁄4” Lock Washer
3⁄4” Lock Nut
3⁄4” x 41/2” Gr. 8 Bolt
3⁄4” x 5” Gr. 8 Bolt
3⁄4” x 51/2” Gr. 8 Bolt
3⁄4” x 6” Gr. 8 Bolt
3⁄4” Bolt Seat for TA300 Holder
16” Carbide Expander Plate
18” Carbide Expander Plate
20” Carbide Expander Plate
22” Carbide Expander Plate
24” Carbide Expander Plate
38
Weight (lbs)
Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 67
Roller Chain Section
To Order Roller Chain
P = One Pitch
1. Measure Length of Pitch
2. Count the number of pitches or rollers
P
3. From one pin to the next pin equals one pitch
Part No.
Description
40R Cut
40CL
400L
50R Cut
50CL
500L
60R Cut
60CL
600L
60HR Cut
60HCL
60HOL
60-2R Cut
60-2CL
60-2OL
80HR Cut
80HCL
80HOL
100HR Cut
100HCL
100HOL
120R Cut
120CL
160R Cut
160CL
#40 Roller Chain, Pitch Length 1⁄2"
#40 Conn. Link
#40 Offset Link
#50 Roller Chain, Pitch Length 5⁄8"
#50 Conn. Link
#50 Offset Link
#60 Roller Chain, Pitch Length 3⁄4"
#60 Conn. Link
#60 Offset Link
#60 Heavy Roller Chain, Pitch Length 3⁄4"
#60 Heavy Conn. Link
#60 Heavy Offset Link
#60 Double Roller Chain, Pitch Length 3⁄4"
#60 Double Conn. Link
#60 Double Offset Link
#80 Heavy Roller Chain, Pitch Length 1"
#80 Heavy Conn. Link
#80 Heavy Offset Link
#100 Heavy Roller Chain, Pitch Length 11⁄4"
#100 Heavy Conn. Link
#100 Heavy Offset Link
#120 Roller Chain, Pitch Length 11⁄2"
#120 Conn. Link
#160 Roller Chain, Pitch Length 2"
#160 Conn. Link
We stock nearly every size of Roller Chain.
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts • Page 68
Notes
Notes
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Ballantine, Inc. • Ditch Witch
®
Replacement Par ts
Warning
!
▲
Use Care To Prevent Injury
Comply with the Following to
Avoid Serious Personal Injury
1.
Guards must be provided on all chain and sprocket installations in accordance with provisions of ANSI/ASME B15.1 - 1996 “Safety Standards for
Mechanical Power Transmission Apparatus,” and ANSI/ASME B20.1 1996 “Safety Standards for Conveyors and Related Equipment,” or other
applicable safety standards. When revisions of these standards are published, the updated edition shall apply.
2.
Always lock out power switch before installing, removing, lubricating or
servicing a chain system.
3.
When connecting or disconnecting chain:
a.
Eye protection is required. Wear safety glasses, protective clothing, gloves, and safety shoes.
b.
Support the chain to prevent uncontrolled movement of chain
and parts.
c.
Use of pressing equipment is recommended. Tools must be in
good condition and properly used.
d.
Determine correct direction for pin/rivet removal or insertion.
Warning
!
▲
Use Care To Prevent Injury
Comply with the Following to
Avoid Serious Personal Injury
1.
Guards must be provided on all chain and sprocket installations in accordance with provisions of ANSI/ASME B15.1 - 1996 “Safety Standards for
Mechanical Power Transmission Apparatus,” and ANSI/ASME B20.1 1996 “Safety Standards for Conveyors and Related Equipment,” or other
applicable safety standards. When revisions of these standards are published, the updated edition shall apply.
2.
Always lock out power switch before installing, removing, lubricating or
servicing a chain system.
3.
When connecting or disconnecting chain:
a.
Eye protection is required. Wear safety glasses, protective clothing,
gloves, and safety shoes.
b.
Support the chain to prevent uncontrolled movement of chain and
parts.
c.
Use of pressing equipment is recommended. Tools must be in
good condition and properly used.
d.
Determine correct direction for pin/rivet removal or insertion.
Part No.T01101
©Ballantine, Inc. 2008
All Rights Reserved