The United States and Canada recognize a US Government policy regarding Daylight Saving Time.
Daylight Savings Time will begin on the second Sunday in March and end on the first Sunday of
November.
Synectic is pleased to offer assistance, as some Avaya products will require modification. Please follow the two-step instructions below to correct the system time for your Partner Phone System in March and then again in November.
To change the status of Automatic Daylight Savings Time for Partner ACS 3.0 or later
At extension 10 or 11 with a Display Phone
1. FEATURE 0 0 (beep)
2. LEFT INTERCOM, LEFT INTERCOM (System Program)
3. # 1 2 6 [Auto Daylight Saving]
4. Dial 2 – for Not Active
5. FEATURE 0 0 – to exit programming
To change the System Time for All Partner Versions
At extension 10 or 11 with a Display Phone
1. FEATURE 0 0 (beep)
2. LEFT INTERCOM, LEFT INTERCOM (System Program)
3. # 1 0 3 [System Time]
4. Enter the new time in 4-digit 24Hr format. For example, to set the time as 2:15 PM, press 1 4 1
5
5. FEATURE 0 0 - to exit programming
This will set the time on all display phones.
Important!
When the time is changed on the display phone, this will also change the time in Partner
Mail VS, Partner PC Cards, and Partner Messaging Voicemail systems.
For further needs, customers may call Synectic at 877-869-6300.