Catalog Number Notes Type FEATURES & SPECIFICATIONS INTENDED USE — The Avante side-mounted diffuser is for use as general area lighting and for private offices. Especially suited for conference rooms, corridors and reception areas where soft distinctive lighting is required. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. 2AV 2’x 2’ SMD CONSTRUCTION — Housing is gloss white enamel on cold rolled steel. All edges hemmed or rounded. All shieldings pivot on light traps and swing down for easy lamp access. Molded light traps prevent light leaks between shielding and endplates. OPTICS — Matte white polyester powder paint finished reflector provides uniform light distribution. Optional low brightness diffuse aluminum stepped reflector available. SIDE-MOUNTED DIFFUSER Compact Fluorescent 2 lamps All diffusers control direct light distribution and glare by shielding lamps from direct view. Metal diffuser staggered round holes (MDR) 52% open perforated metal with .075” diameter holes backed with white acrylic diffuser. Metal diffuser aligned mini slots (MDM) 46% open perforated metal backed with white acrylic diffuser. ELECTRICAL — All ballasts supplied are class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified. Ballasts are sound rated A. Standard combinations conform to UL 935. INSTALLATION — Trims available for standard 1” and 9/16” tee bar or screw slot grids. Fixtures can be row mounted end-to-end. Drywall ceiling adapters available. LISTINGS — UL Listed to US and Canadian safety standards. Chicago Plenum approved and NYC approved (see Options). Avante is covered by one or more of the following patents: 5,988,829; 399,586; 411,641; 413,402; 2,212,513; 87,513. WARRANTY — 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx NOTE: Specifications are subject to change without notice. Specifications Length:24 (61.0) Width: 24 (61.0) Diffuser width: 6 (15.2) Depth: 5-1/2 (14.0) 5-7/8 (14.9) for air fixture All dimensions are inches (centimeters) unless otherwise indicated. ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: 2AV G 2 CF40 MDR SMD 120 GEB10PS 2AV SMD Series Number of lamps 2AV 2’ wide 2 Not included. Trim type G Grid trim ST Screw slot CF40 40W TT5 (22.5”) (blank) Static (no air function) A Air return/supply Options GEB10PS Electronic ballast, < 10% THD, program start SMD Sidemounted diffuser CF50 50W TT5 (22.5”)1 CF55 55W TT5 (22.5”)1 Air function Lamp distribution Lamp type Diffuser Voltage MDR Metal diffuser, round holes MVOLT2 MDM Metal diffuser, mini slots 347 Others available. Others available. NOTES: 1 For CF50 and CF55 lamps specify ballast manufacturer. 2 MVOLT (120 - 277 volt), where available. 3 Refer to options and accessories tab for more detailed information. 4 Must specify voltage, 120 or 277. Fluorescent ALG Acrylic litter guard3 EL14 Emergency battery pack (nominal 300 lumens, see Life Safety section) GLR Internal fast-blow fuse4 LP_ Lamped. Specify lamp type and color PWS1836 6’ prewire, 3/8” dia., 18-gauge, 3 wires NY3 New York City approved CP Chicago Plenum approved Reflector option ASR Aluminum stepped reflector Accessories Order as separate catalog number. DGA22 Drywall ceiling adapter, unit installation. Use G trim plus DGA accessory for fixture trim flange and fixture support in plaster or plasterboard ceilings. Sheet #: 2AV 2X2 SMD CF ARCH-250 2AV 2x2 SMD Direct/Indirect Lighting 2AV G 2 C40 MDR SMD, (2) 40W CF lamps, 3150 lumens per lamp, s/m 1.2 (along) 1.3 (across), test no. LTL 9713 Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10% 0 79 79 79 77 77 77 74 74 74 1 72 68 65 67 64 61 64 62 60 2 65 59 54 58 53 49 55 52 48 3 59 51 46 50 45 41 48 44 40 4 54 45 39 44 39 34 43 38 34 5 49 40 34 40 34 29 38 33 29 6 45 36 30 36 30 25 34 29 25 7 42 33 27 32 26 22 31 26 22 8 39 30 24 29 24 20 28 23 20 9 37 27 22 27 22 18 26 21 18 10 34 25 20 25 20 16 24 19 16 200 70˚ 400 600 50˚ 800 1000 1200 10˚ 0˚ 30˚ CP Summary 0˚ 90 0˚ 1332 1332 5˚ 1324 1324 15˚ 1285 1292 25˚ 1191 1228 35˚ 1044 1126 45˚ 854 1014 55˚ 629 888 65˚ 407 759 75˚ 207 590 85˚ 41 116 90 0 0 RCR 90˚ Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 1044 16.6 24.9 0˚ - 40˚ 1720 27.3 41.0 0˚ - 60˚ 3116 49.5 74.3 0˚ - 90˚ 4193 66.6 100.0 90˚ - 180˚ 0 0.0 0.0 0˚ - 180˚ 4193 66.6 100.0 Efficiency: 66.6% 90˚ 2 AV G 2CF40 MDM SMD, (2) 40W CF lamps, 3150 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 11482 Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10% 0 68 68 68 66 66 66 64 64 64 1 62 59 56 57 55 53 55 53 51 2 56 50 46 49 45 42 47 44 41 3 50 44 39 43 38 35 41 37 34 4 46 39 33 38 33 29 36 32 29 5 42 34 29 34 29 25 32 28 24 6 39 31 25 30 25 21 29 25 21 7 36 28 23 27 22 19 26 22 19 8 33 25 20 25 20 17 24 20 17 9 31 23 18 23 18 15 22 18 15 10 29 21 17 21 17 14 21 16 14 200 70˚ 400 50˚ 600 800 1000 10˚ 0˚ 30˚ CP Summary 0˚ 90 0˚ 1103 1103 5˚ 1100 1098 15˚ 1070 1070 25˚ 1003 1009 35˚ 898 923 45˚ 764 825 55˚ 607 722 65˚ 436 621 75˚ 255 490 85˚ 49 81 90 0 0 RCR 90˚ Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 870 13.8 24.2 0˚ - 40˚ 1439 22.8 39.9 0˚ - 60˚ 2637 41.8 73.2 0˚ - 90˚ 3603 57.2 100.0 90˚ - 180˚ 0 0.0 0.0 0˚ - 180˚ 3603 57.2 100.0 Efficiency: 57.2% 90˚ 2AV G C40 MDR SMD ASR, (2) 40W CF lamps, 3150 lumens per lamp, s/m 1.3 (along) 1.6 (across), test no. LTL 9786 100 70˚ 200 300 400 50˚ 500 600 700 800 900 10˚ 0˚ 30˚ CP Summary 0˚ 90 0˚ 738 738 5˚ 742 735 15˚ 729 741 25˚ 689 758 35˚ 612 760 45˚ 510 745 55˚ 385 703 65˚ 257 623 75˚ 145 469 85˚ 28 82 0 90 0 Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10% 0 53 53 53 51 51 51 49 49 49 1 47 45 43 44 42 40 42 40 39 2 43 39 35 38 35 32 36 33 31 3 38 33 29 33 29 26 31 28 26 4 35 29 25 29 25 22 28 24 21 5 32 26 22 25 21 18 24 21 18 6 29 23 19 23 19 16 22 18 16 7 27 21 17 21 17 14 20 16 14 8 25 19 15 19 15 12 18 15 12 9 24 17 14 17 13 11 17 13 11 10 22 16 12 16 12 10 15 12 10 RCR 90˚ Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 610 9.7 22.0 0˚ - 40˚ 1037 16.5 37.3 0˚ - 60˚ 1992 31.6 71.7 0˚ - 90˚ 2778 44.1 100.0 90˚ - 180˚ 0 0.0 0.0 0˚ - 180˚ 2778 44.1 100.0 Efficiency: 44.1% 90˚ MOUNTING DATA Appropriate Ceiling Type Trim Type Exposed grid tee (1' and 9/16")G Concealed grid teeG Screw slotST Plaster or plasterboardG* *DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 24-3/4" (Tolerance is +1/8", -0”). Lithonia Lighting Sheet#: 2AV 2x2 SMD CF © 2007-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/21/12 Fluorescent One Lithonia Way, Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com