SHOEBOX
The Induction Shoebox Series can be used in a variety of applications including parking lots,
tennis courts, public areas, and car dealerships. It features a squared welded aluminum housing
with superior corrosion resistance. All luminaires in the Induction Shoebox Series operate well in
cold temperatures with an Instant On/re-strike capability and are suitable for use in wet locations
(IP54). The long life and superior lumen maintenance of induction significantly reduce maintenance
costs and provide a considerable reduction in the total cost of ownership.
APPLICATIONS
• Parking Lots
• Tennis Courts
• Car Dealerships
• Public Areas
• Intended to Replace HID
ELECTRICAL
• Universal Voltage (120V – 277V)
• High Power Factor (>.95)
• Ambient Temperature Rating: -4°F to 104°F
-20°C to 40°C
• Input Frequency: 50/60 Hz
• Constant Wattage Output With Less Than 3% Variance
• Operating Frequency: 250 kHz
• Generator Type: Class P Type 1 Outdoor
• THD %: <10%
• Instant On
• No Noise Compared to HID Systems
• No Lumen Output Variation Over a Wide Range of
Temperatures and Through Voltage Fluctuations
• Pre-Wired Output Connector (Plug and Play)
• Step Down Transformer Voltage: 347V/480V to 277V
• CSA: 208V-347V, CE: 208V-240V
28
CHARACTERISTICS
• Low Lumen Depreciation: >70% Lumen Maintenance at 60,000 Hours
• Standard Kevin Temperature is 5000K: Provides a Cooler Color Temperature
• Wide Range of Color Temperature Options Available: 2700K – 6500K1
• Pre-Wired Input Connector
• CRI > 80
• Vibration and Shock Resistant: No Filament
COMPLIANCE
• UL listed – UL 1598 (E363375)
• cUL listed – UL 1598 (E363375)
• FCC Part 18-A
• Surge Immunity – IEC 61000-4-5: Class 4
• CSA/CE: Refer to Product's CSA/CE Wattage Options
CONTACT FULHAM CLIENT SERVICES FOR:
• Luminaires with a full range of lamp color temperatures between 2700K – 6500K
• Lamps specifically designed for use in extreme cold applications or environments
• Dimming options
• Replacement components (generators & lamps) also sold separately
• Color options for finish: Gray, Black, White, Dark Bronze, Green
WARRANTY
• Five-year limited warranty available for Induction Lighting System. See page 43.
1
Consult with your sales representative for availability.
www.fulham.com
BASIC COLLECTION - SHOEBOX SERIES
SB01
DARK
SKY
FRIENDLY
CONSTRUCTION
• Squared Welded Aluminum Housing
• Corrosion Resistant
• Profile Generator
• Standard Powder Coated Finish: Dark Bronze
• Flat Clear Tempered Glass Lens
• Integrated Structure for Lamp and Generator
• 4" Square Mounting Arm (Standard)
• Optional: Slipfitter (Round Pole),
6" Square Arm and 8” Square Arm
OPTICS
• Clear Glass Lens with High Light Penetration
• High Reflectivity Vacuum Coated
Inner Surface Finish
• Symmetric Hydroformed Aluminum Reflector
• Type V Distribution
IP RATING
• IP54: Suitable for Wet Location
LAMP TYPE/WATTAGES
• Circular Induction Lamps Available:
40W1, 55W1, 70W1, 80W1, 100W
NOTE:
Consult with your sales representative for availability.
1
PROFILE INDUCTION GENERATOR
ORDERING OPTIONS
TYPE
CIRCULAR INDUCTION
40W - 100W
MOUNTING HEIGHT
8' to 15'
ACCESSORIES
DESCRIPTION
PART NUMBERS
SB = SHOEBOX
SERIES
01 = 01 SERIES
LAMP
C = CIRCULAR
STEP DOWN TRANSFORMER
35W-100W
WATTAGE
040 = 40W1
055 = 55W1
070 = 70W1
080 = 80W1
100 = 100W
LENS
MOUNTING
COLOR TEMP
G = GLASS
BLANK =
4" SQUARE ARM
6 = 6" SQUARE ARM1
8 = 8" SQUARE ARM1
I = SLIPFITTER
(ROUND POLE)1
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
HH-ILS-SD1-125VA
Example: SB-01-C040-G (Shoebox, 01 Series, Circular, 40W, Glass Lens, 4" Square Arm, 5000K)
Example: SB-01-C100-G-I-60 (Shoebox, 01 Series, Circular, 100W, Glass Lens, Slipfitter (Round Pole), 6000K)
SB02
DARK
SKY
FRIENDLY
CONSTRUCTION
• Squared Welded Aluminum Housing
• Corrosion Resistant
• Profile Generator
• Standard Powder Coated Finish: Dark Bronze
• Separate Generator and Lamp Compartment
Engineered for Reliability and Easy
Maintenance
• Flat Clear Tempered Glass Lens
• 4" Square Mounting Arm (Standard),
• Optional: Slipfitter (Round Pole),
6" Square Arm and 8" Square Arm
OPTICS
• Clear Glass Lens with High Light Penetration
• High Reflectivity Vacuum Coated
Inner Surface Finish
• Symmetric Hydroformed Aluminum Reflector
• Type V Distribution
IP RATING
• IP54: Suitable for Wet Location
CSA WATTAGE OPTIONS
• CSA: 150W, 200W, 250W
LAMP TYPE/WATTAGES
• Circular Induction Lamps Available:
150W, 200W, 250W
PROFILE INDUCTION GENERATOR
CIRCULAR INDUCTION
150W - 250W
MOUNTING HEIGHT
12' to 40'
ORDERING OPTIONS
TYPE
ACCESSORIES
DESCRIPTION
NOTE:
1
Consult with your sales representative for availability.
PART NUMBERS
SB = SHOEBOX
SERIES
02 = 02 SERIES
LAMP
C = CIRCULAR
STEP DOWN TRANSFORMER
250W-400W
WATTAGE
150 =150W
200 = 200W
250 = 250W
LENS
MOUNTING
COLOR TEMP
G = GLASS
BLANK =
4" SQUARE ARM
6 = 6" SQUARE ARM1
8 = 8" SQUARE ARM1
I = SLIPFITTER
(ROUND POLE)1
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
J = CSA1
HH-ILS-SD3-460VA
Example: SB-02-C150-G (Shoebox, 02 Series, Circular, 150W, Glass Lens, 4" Square Arm, 5000K)
Example: SB-02-C250-G-I-60 (Shoebox, 02 Series, Circular, 250W, Glass Lens, Slipfitter (Round Pole), 6000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
323 599 5000
29
(323) 599-5000
BASIC COLLECTION - SHOEBOX SERIES
SB03
DARK
SKY
FRIENDLY
SEALED DIE CAST INDUCTION GENERATOR
CONSTRUCTION
• Squared Welded Aluminum Housing
• Corrosion Resistant
• Sealed Die Cast Generator
• Standard Mounting (Luminaire mounts
directly without any of the mounting
options descibed below)
• Standard Powder Coated Finish: Dark Bronze
• Separate Generator and Lamp Compartment
Engineered for Reliability and Easy
Maintenance
• Polycarbonate Lens
• 4" Square Mounting Arm (Standard)
• Optional: Slipfitter (Round Pole),
6" Square Arm and 8" Square Arm
LAMP TYPE/WATTAGES
• Circular Induction Lamps Available:
250W, 300W
OPTICS
• Polycarbonate Lens
• High Reflectivity Vacuum Coated
Inner Surface Finish
• Symmetric Hydroformed Aluminum Reflector
• Type V Distribution
IP RATING
• IP54: Suitable for Wet Location
NOTE: 1Consult with your sales representative for availability.
2
Consult with your sales representative for lead time.
3
Luminaire munts directly to pole.
CIRCULAR INDUCTION
250W - 300W
MOUNTING HEIGHT
15' to 40'
ORDERING OPTIONS
TYPE
SERIES
LAMP
WATTAGE
LENS
MOUNTING
COLOR TEMP
P = POLYCARBONATE
X = STANDARD3
BLANK =
4" SQUARE ARM
6 = 6" SQUARE ARM1
8 = 8" SQUARE ARM1
I = SLIPFITTER
(ROUND POLE)1
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
ACCESSORIES
DESCRIPTION
PART NUMBERS
STEP DOWN TRANSFORMER
250W-400W
SB = SHOEBOX
03 = 03 SERIES
C = CIRCULAR
250 = 250W
300 = 300W
HH-ILS-SD3-460VA
Example: SB-03-C250-P (Shoebox, 03 Series, Circular, 250W, Polycarbonate Lens, 4" Square Arm, 5000K)
Example: SB-03-C300-P-I-60 (Shoebox, 03 Series, Circular, 300W, Polycarbonate Lens, Slipfitter (Round Pole),6000K)
SB04
DARK
SKY
FRIENDLY
CONSTRUCTION
• Squared Welded Aluminum Housing
• Corrosion Resistant
• Profile Generator
• Standard Powder Coated Finish: Dark Bronze
• Flat Clear Tempered Glass Lens
• Integrated Structure for Lamp and Generator
• 4" Square Mounting Arm (Standard)
• Optional: Slipfitter (Round Pole),
6" Square Arm and 8" Square Arm
OPTICS
• Glare Reduction Lens
• Specular Polished Surface Reflector Finish
• Precision Formed Anodized Reflector
• Type V Distribution
IP RATING
• IP54: Suitable for Wet Location
LAMP TYPE/WATTAGES
• Tubular Induction Lamps Available:
300W, 400W
PROFILE INDUCTION GENERATOR
TUBULAR INDUCTION
300W - 400W
MOUNTING HEIGHT
20' to 40'
NOTE: 1Consult with your sales representative for availability.
ACCESSORIES
DESCRIPTION
PART NUMBERS
ORDERING OPTIONS
TYPE
SERIES
LAMP
WATTAGE
LENS
MOUNTING
COLOR TEMP
G = GLASS
BLANK =
4" SQUARE ARM
6 = 6" SQUARE ARM1
8 = 8" SQUARE ARM1
I = SLIPFITTER
(ROUND POLE)1
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
STEP DOWN TRANSFORMER
250W-400W
HH-ILS-SD3-460VA
SB = SHOEBOX
04 = 04 SERIES
T = TUBULAR
300 = 300W
400 = 400W
Example: SB-04-T300-G (Shoebox, 04 Series, Tubular, 300W, Glass Lens, 4" Square Arm, 5000K)
Example: SB-04-T400-G-I-60 (Shoebox, 04 Series, Tubular, 400W, Glass Lens, Slipfitter (Round Pole), 6000K)
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice.
30
fulham.com
www.fulham.com
BASIC COLLECTION
COLLECTION -- SHOEBOX
INDUCTIONSERIES
CANOPY SERIES
BASIC
SB05
DARK
SKY
FRIENDLY
CONSTRUCTION
• Die Cast Aluminum Housing
• Corrosion Resistant
• Low Profile Design
• Standard Powder Coated Finish:
Dark Bronze
• Gas-tight Silicon Rubber Seal
• Slipfitter Round Pole (Standard)
• Optional: Swivel Bracket
OPTICS
• Flat Clear Tempered Glass Lens
• Specular Polished Surface Reflector Finish
• Precision Formed Anodized Reflector
• Type V Distribution
IP RATING
• IP54: Suitable for Wet Location
LAMP TYPE/WATTAGES
• Tubular Induction Lamp Available:
300W (2 x 150W)
PROFILE INDUCTION GENERATOR
TUBULAR INDUCTION
300W
MOUNTING HEIGHT
20' to 40'
NOTE: 1Consult with your sales representative for availability.
ORDERING OPTIONS
ACCESSORIES
DESCRIPTION
PART NUMBERS
TYPE
SERIES
LAMP
WATTAGE
LENS
STEP DOWN TRANSFORMER
250W-400W
HH-ILS-SD3-460VA
SB = SHOEBOX
05 = 05 SERIES
T = TUBULAR
300 = 300W
G = GLASS
MOUNTING
COLOR TEMP
I = SLIPFITTER
(ROUND POLE)
V = SWIVEL
BRACKET1
BLANK = 5000K
27 = 2700K
30 = 3000K
40 = 4000K
60 = 6000K
65 = 6500K
Example: SB-05-T300-G-I (Shoebox, 05 Series, Tubular, 300W, Glass Lens, Slipfitter (Round Pole), 5000K)
Example: SB-05-T300-G-V-60 (Shoebox, 05 Series, Tubular, 300W, Glass Lens, Swivel Bracket, 6000K)
Checksubject
with sales
representative
for availability.
Actual performance may differ as a result of end-user environment and application. Specifications
to change
without notice.
323 599 5000
31
(323) 599-5000